Related
I'm on MF3 right now, but can I use ODIN to go back to AMDL, then root and install a different recovery? It seems that the answer is yes because I saw a thread to download ODIN with AMDL, and that AMDL will allow you to fully root with a custom recovery. Just wanted to confirm before I start down the path of no return. Just want to get the 4.3 Google Edition going on my SGH-1337.
Thanks all.
EDIT: Did some more snooping and other threads saying you cannot use ODIN to go back to AMDL. Ugh. Guess I'll have to wait.
Your post edit is correct.
You have other options. Check out post #2 of the I337 guide in my signature. It covers root and safestrap for your mf3 firmware. Read up though, and don't jump into it without knowledge.
Cheers
jedil1c1ous said:
I'm on MF3 right now, but can I use ODIN to go back to AMDL, then root and install a different recovery? It seems that the answer is yes because I saw a thread to download ODIN with AMDL, and that AMDL will allow you to fully root with a custom recovery. Just wanted to confirm before I start down the path of no return. Just want to get the 4.3 Google Edition going on my SGH-1337.
Thanks all.
EDIT: Did some more snooping and other threads saying you cannot use ODIN to go back to AMDL. Ugh. Guess I'll have to wait.
Click to expand...
Click to collapse
I just want to add that you cannot do ANYTHING (other than rooting) at the moment with the MF3. I will promise you that it will totally jack up your device.
Your best off rooting installing exposed and than install wanam exposed app and that will get you the customization of a stock rom with everything you can possibly ask for.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
agent929 said:
I just want to add that you cannot do ANYTHING (other than rooting) at the moment with the MF3. I will promise you that it will totally jack up your device.
Click to expand...
Click to collapse
Safestrap
xBeerdroiDx said:
Safestrap
Click to expand...
Click to collapse
I stand corrected
So I have my S4 roooted using the CF Auto Root and flashing stock MF9. I installed the TWRP through Goo MAnager
This morning my phone request me to install the 4.3 update OTA...
I thought that rooted phone lost the OTA update capabilities?
If I wanted to update to 4.3.... Should I flash to 4.3 using Odin or should I go with the OTA?
What about the Knox boot thing?
kreizyidiot said:
So I have my S4 roooted using the CF Auto Root and flashing stock MF9. I installed the TWRP through Goo MAnager
This morning my phone request me to install the 4.3 update OTA...
I thought that rooted phone lost the OTA update capabilities?
If I wanted to update to 4.3.... Should I flash to 4.3 using Odin or should I go with the OTA?
What about the Knox boot thing?
Click to expand...
Click to collapse
If you didn't install a custom kernel you probably will be able to take the OTA.
You will lose root, and your custom recovery.
You will be stuck with knox bootloader.
You should spend a whole lot of time reading throught the stickies, how-to's and follow-up posts.
leaderbuilder said:
If you didn't install a custom kernel you probably will be able to take the OTA.
You will lose root, and your custom recovery.
You will be stuck with knox bootloader.
You should spend a whole lot of time reading throught the stickies, how-to's and follow-up posts.
Click to expand...
Click to collapse
So can I forgo the ota update and flash through Odin?
kreizyidiot said:
So can I forgo the ota update and flash through Odin?
Click to expand...
Click to collapse
Yes you can.
HOWEVER I would suggest you read a whole lot more on how to do that and the implications of doing so.
To get the MJA firmware (modem & files) WITHOUT tripping Knox (locked bootloader) check out Unknownforce's post(s)
IF you just want 4.3 you can go ahead and flash cnexus', Unknownforce's, negamann303, or Sac's ROM(s) but make sure you follow their OPs on how to do that specifically using Philz recovery and rebooting recovery before actual ROM flash.
I sense that you just want to 'jump in' to 4.3 right away. There are many things to understand before doing that. If you wish to not be 'surprised' by an issue that is/has already described and remedied then read a bunch first.
Good luck.
oh, and if I or any member has helped you there is a 'Thanks Button' there too.
Can someone help me take my S4 back to 4.3? I got the OTA update for 4.4 yesterday morning and have had nothing but problems. Terrible battery life (40% down in 3 hours with little to no use) WiFi wont turn on thanks to this piece of junk Knox software. So before I dump Samsung completely for a Moto X or Nexus, can someone help me downgrade from 4.4 back to 4.3 where I had no problems?
Were you totally stock before the OTA? If you still have warranty left, I would bring it in to a Sprint store and *****.
If not, you can try one of 2 things. 1) flash the NAE tar file using odin to see if that fixes your issues or 2) flash the MK2 tar file to bring you back to 4.3
aypanthony said:
Were you totally stock before the OTA? If you still have warranty left, I would bring it in to a Sprint store and *****.
If not, you can try one of 2 things. 1) flash the NAE tar file using odin to see if that fixes your issues or 2) flash the MK2 tar file to bring you back to 4.3
Click to expand...
Click to collapse
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
You're correct with not being able to go back to mk2 4.3 via Odin.
Sent from my SPH-L720 using Tapatalk
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
Yeah, I think you are right. Can't go back to 4.3 once you have the 4.4 bootloader, my bad. I wonder if you should do a factory reset to see if that clears up your issues.
daniel4653 said:
You're correct with not being able to go back to mk2 4.3 via Odin.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Is there some other way of downgrading? What about going back to Cyanogen's full release?
Well that sucks that you can't go back to 4.3
I had the same issues when I updated and was kinda pissed at it to but a factory reset and it been running way better ever since and I'm rooted with xposed installed and no complaints
Sent from my SPH-L720 using xda app-developers app
sponge14 said:
I went Cyanogen at one point, didn't like it, and flashed back to stock. When the OTA hit I was rooted but had made no changes from stock, not even an uninstall of a Samsung app. I am backing things up now to flash the NAE again, but I want a version without this Knox garbage in it. Is there such thing?
I read that you can't flash back with Odin from 4.4 to 4.3 so I don't know how to do option 2 at this point.
Click to expand...
Click to collapse
I believe once KNOX Bootloader has been installed, your stuck with it. No going back.
But honestly, if you root 4.4, your gonna void KNOX.
lawmangrant said:
I believe once KNOX Bootloader has been installed, your stuck with it. No going back.
But honestly, if you root 4.4, your gonna void KNOX.
Click to expand...
Click to collapse
I don't want Knox on my phone at all, it's garbage for me. Are you saying I can't even go Cyanogen at this point?
sponge14 said:
I don't want Knox on my phone at all, it's garbage for me. Are you saying I can't even go Cyanogen at this point?
Click to expand...
Click to collapse
You can still have all that. KNOX is just the warrantly flag I have KNOX on mine, but I still have rooted and flashed other roms.
lawmangrant said:
You can still have all that. KNOX is just the warrantly flag I have KNOX on mine, but I still have rooted and flashed other roms.
Click to expand...
Click to collapse
Ah OK, I don't care about the warranty, it's out in April anyways... Looks like I need to try Cyanogen again, hopefully it's better this time.
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
chris-allen said:
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
You're saying your bootloader went back to MK2 after this? Didn't think that was possible. I've had nothing but stupid little issues myself after using Odin to flash the phone to NAE. I've done factory resets... Completely wiped the phone in Philz. Tried KToonsez kernel as well and stock NAE just sux! I'll probably just flash Liquid Smooth back on it, was only trying to stick with stock NAE for stability and camera , that phone is my girls and she doesn't have the patience for all the bugs that come with custom Roms lol
Anyways just want to confirm that with you. Thanks
Sent from my SCH-I545 using Tapatalk
chris-allen said:
i have gone back to 4.3 with odin.....use odin 1.85.....*First flash the mk2 modem or it will fail**.....why? i dont know...
so here is what i do....1) Odin first the mk2 modem...2) Odin stock Mk2 rom...3) Odin philz latest recovery...4) boot into recovery..goto philz settings and tap " re-root....5) reboot and enjoy.....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I don't know if that is possible for those of us rocking triband. Obviously we cannot use the Mk2 modem or rom. In any event, I upgraded to 4.4.2 on my new L720T and regretted it, but now I'v" managed to install twrp and rooted it and the rom settled down after a few days. At first, horrible battery use but now its amazing. My battery reads 75 percent after 14 hours and that's quite good enough. The only issue I still face is the SD card thing, but that only seems to apply third party software as I can move files directly from internal to external memory using the stock files app that comes with android.
i dont know about triband. i dont have one and im not going to pretend im a smart dev because thats also not true.. i HAVE ODIN 4.4.2 THEN turned around and ODIN 4.3 due to something i didnt like...im not sure if it changes the bootloader or not, i dont even check. i have only tried this with mk2 to nae.. when i purchesed my device it came with mk2 so i have never tinkerd with the other bootloaders. if you have something other then mk2 id ask a dev befor doing anything. like i said it works for me as long as i flash the modem FIRST that corrisponds to the build. ( mk2 or nae )...and in some cases if the wifi is borked on nae, iv had to flash the modem again after instalation of the rom.. i cant explain why any of this happens....
Sent from my SPH-L720 using xda app-developers app
chris-allen said:
i dont know about triband. i dont have one and im not going to pretend im a smart dev because thats also not true.. i HAVE ODIN 4.4.2 THEN turned around and ODIN 4.3 due to something i didnt like...im not sure if it changes the bootloader or not, i dont even check. i have only tried this with mk2 to nae.. when i purchesed my device it came with mk2 so i have never tinkerd with the other bootloaders. if you have something other then mk2 id ask a dev befor doing anything. like i said it works for me as long as i flash the modem FIRST that corrisponds to the build. ( mk2 or nae )...and in some cases if the wifi is borked on nae, iv had to flash the modem again after instalation of the rom.. i cant explain why any of this happens....
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Lol I know what you mean... Sometimes things just seem to work or they don't.
But that's interesting you can go back to mk2 after being on nae. I figured that was not possible. But if you didn't get any fails in Odin while downgrading that's great. Maybe I'll get ballsy and try this later.
Sent from my SCH-I545 using Tapatalk
Is there a stock 4.4 Rom out there I can try, preferably one without Knox? Sprint has recommended that I unroot, that they have a tech bulletin where rooted phones have wifi, and other issues.
sponge14 said:
Is there a stock 4.4 Rom out there I can try, preferably one without Knox? Sprint has recommended that I unroot, that they have a tech bulletin where rooted phones have wifi, and other issues.
Click to expand...
Click to collapse
You have a link to that bulletin??
Sent from my SCH-I545 using Tapatalk
Mistertac said:
You have a link to that bulletin??
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No that's just what the escalated Tech Support person from Oklahoma City told me.
I also just wiped the cache and did a factory reset and still have the same wifi problem...
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
You SOL buddy. Sell the phone and get something else. You will never be able to downgrade
MOTO X SLAPPED
djmisi99 said:
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
Click to expand...
Click to collapse
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
el o el
The s4 is nothing like previous samsung devices...at least on att, the bootloader is locked, safestrap is your only option.
Also keep in mind, att stated about a year ago they will no longer be supporting phones with unlocked bootloaders...so the problem you are experiencing now can be expected on every new att branded phone
Sent from my SAMSUNG-SGH-I337 using Tapatalk
djmisi99 said:
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
Click to expand...
Click to collapse
There is NO WAY back from mk2. You can flash custom roms ONLY with Safestrap. No CWM no TWRP. Read this guide, it has everything you need to know for the S4. There is nearly 30 custom roms tested & affirmed working. Good luck & happy reading.
http://forum.xda-developers.com/showthread.php?t=2616221
SGS4 AT&T i337 on Stock MK2...jeboo kernel/recovery needed to install SHOstock v3.0 ?
I am very familiar with custom roms and your kernels, from always using them on my SGS2 i777 (AT&T), but i just bought an SGS4 i337 AT&T, on MK2 baseband, and everybody suggested I should install the SHOstock v3.0 for the i337 (http://forum.xda-developers.com/show....php?t=2305752).
Problem is, I am sooooo confused now, because there is jeboo kernels: (Jeboo_Kernel_i337_v3_0a-i.zip, Jeboo_Kernel_i337_v3_0a.zip, Jeboo_Kernel_i337_v3_0.zip, Jeboo_Kernel_i337_v2_2.zip)
...than there's your RECOVERY: Jeboo_Recovery_v2_1.zip
so Im very confused now how I should go about installing our most awesome DEV shoman94's SHOstock v3.0) ROM...==> THAT I DUNNO WHAT SHOULD I DO ANYMORE.....
1. Because, on the thread there (http://forum.xda-developers.com/show....php?t=2305752), in POST#1 it says , in the Instructions, that :We must be running a custom recovery using Jeboo's Recovery from Post#4 which is your Jeboo_Recovery_v2_1.zip
2. But how should I run the Jeboo_Recovery_v2_1.zip RECOVERY, if Im on SafeStrap 3.71 (which is a recovery also)???
3. If i flash Jeboo_Recovery_v2_1.zip, wont that brick (or softbrick) the S4?
4. Or if I flash Jeboo_Recovery_v2_1.zip, will I end up having 2 recoveries? Or will I only end up with having only the Jeboo_Recovery_v2_1 ???
5. In POST#3, it says that:
IF YOUR PHONE HAS MF3/MK2 BOOTLOADERS, YOU MUST RUN THE MF3/MK2 STOCK KERNEL. DO NOT TRY INSTALLING ANYTHING BELOW UNLESS YOU HAVE MDB/MDL BOOTLOADERS THAT SUPPORT LOKI!!
So, should I NOT flash your Jeboo_Kernel_i337_v2_2.zip , since I am on MK2 stock kernel/baseband/bootloader....?
Check it out: http://i.imgur.com/cNWijKF.png
7. I mean, what is BELOW MF3/MK2 and ABOVE MDB/MDL? Because it also says, that: All binaries posted here will be loki'd (as signified by the .lok extension).
SO, keeping in mind that Im on Stock MK2 , but also Im ROOTED via SAFEROOT.zip (as you can see in the pic above: (http://i.imgur.com/cNWijKF.png) , can someone please tell me if I should flash this SHOstock v3.0, and more speciafically, WHICH, IF ANY of you jeboo kernels and Jeboo Recovery should I use?
Can I bug any of you to tell me the exact steps on how to get this SHOstock 3.0 on my i337, if I'm on MK2, rooted, and safestrap-ed?
ANy help would be much appreciated
djmisi99 said:
I am very familiar with custom roms and your kernels, from always using them on my SGS2 i777 (AT&T), but i just bought an SGS4 i337 AT&T, on MK2 baseband, and everybody suggested I should install the SHOstock v3.0 for the i337 (http://forum.xda-developers.com/show....php?t=2305752).
Problem is, I am sooooo confused now, because there is jeboo kernels: (Jeboo_Kernel_i337_v3_0a-i.zip, Jeboo_Kernel_i337_v3_0a.zip, Jeboo_Kernel_i337_v3_0.zip, Jeboo_Kernel_i337_v2_2.zip)
...than there's your RECOVERY: Jeboo_Recovery_v2_1.zip
so Im very confused now how I should go about installing our most awesome DEV shoman94's SHOstock v3.0) ROM...==> THAT I DUNNO WHAT SHOULD I DO ANYMORE.....
1. Because, on the thread there (http://forum.xda-developers.com/show....php?t=2305752), in POST#1 it says , in the Instructions, that :We must be running a custom recovery using Jeboo's Recovery from Post#4 which is your Jeboo_Recovery_v2_1.zip
2. But how should I run the Jeboo_Recovery_v2_1.zip RECOVERY, if Im on SafeStrap 3.71 (which is a recovery also)???
3. If i flash Jeboo_Recovery_v2_1.zip, wont that brick (or softbrick) the S4?
4. Or if I flash Jeboo_Recovery_v2_1.zip, will I end up having 2 recoveries? Or will I only end up with having only the Jeboo_Recovery_v2_1 ???
5. In POST#3, it says that:
IF YOUR PHONE HAS MF3/MK2 BOOTLOADERS, YOU MUST RUN THE MF3/MK2 STOCK KERNEL. DO NOT TRY INSTALLING ANYTHING BELOW UNLESS YOU HAVE MDB/MDL BOOTLOADERS THAT SUPPORT LOKI!!
So, should I NOT flash your Jeboo_Kernel_i337_v2_2.zip , since I am on MK2 stock kernel/baseband/bootloader....?
Check it out: http://i.imgur.com/cNWijKF.png
7. I mean, what is BELOW MF3/MK2 and ABOVE MDB/MDL? Because it also says, that: All binaries posted here will be loki'd (as signified by the .lok extension).
SO, keeping in mind that Im on Stock MK2 , but also Im ROOTED via SAFEROOT.zip (as you can see in the pic above: (http://i.imgur.com/cNWijKF.png) , can someone please tell me if I should flash this SHOstock v3.0, and more speciafically, WHICH, IF ANY of you jeboo kernels and Jeboo Recovery should I use?
Can I bug any of you to tell me the exact steps on how to get this SHOstock 3.0 on my i337, if I'm on MK2, rooted, and safestrap-ed?
ANy help would be much appreciated
Click to expand...
Click to collapse
You are making it too hard. You need to be on 3.71 Safestrap to flash Sho's 3.0. You must use default (stock) kernel. You can not flash any other kernels period. And no other recoveries. And no 4.4 or aosp roms. I am not on SafeStrap as I have a MDL phone. So, you need to go the SafeStrap thread and read up on flashing a rom on SafeStrap. There are a couple threads on the subject. Read all you can first and make any backup your phone/recovery allows before flashing. Also, do a clean wipe before installing rom. That may be different then a clean wipe on MDL/Custom Recovery, not sure--:good:
[email protected] said:
You SOL buddy. Sell the phone and get something else. You will never be able to downgrade
MOTO X SLAPPED
Click to expand...
Click to collapse
Problem is it came from AT&T Store with MDL ...but the MK2 update came through OTA...and that must of lock the bootloader....dayummmmmmm...
AM I right?
Yes
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
Phone came from the Store with MDL, ( I see it on the Original box: SoftWare Ver: UCUAMDL....
The guy I bought it from rooted it, and loki-ed it... how did that OTA come through, I wonder? Once rooted and LOKI-ed...the OTAs shouldn't come through, right?
Sounds like the seller messed up and flashed back to stock. He was probably selling it to cut his losses.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
*************************************************************************
THX,
I just saw that the phone originally came with MDL baseband, its on the Original Box...
I wonder, was it with an unlocked bootloader at THAT time?
ANd the MK2 OTA update locked it?
djmisi99 said:
*************************************************************************
THX,
I just saw that the phone originally came with MDL baseband, its on the Original Box...
I wonder, was it with an unlocked bootloader at THAT time?
ANd the MK2 OTA update locked it?
Click to expand...
Click to collapse
Answer, yes & yes. There is plenty of custom roms for mk2 in the All things mk2 guide. You can also upgrade to 4.4.2 Kit Kat now as well. Forget about MDL cause there's no way to go back to it.
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
Red_81 said:
Sounds like the seller messed up and flashed back to stock. He was probably selling it to cut his losses.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
******************************************
But if he had it LOKI-ed, that means he was just fine on MDL, no need for SafeSTrap, unlocked BL prolly ... he was free to install CM, GPE, AOSP, PACman and all these ROMs....so why flash it back to stock MK2? I mean, cutting his losses....that's funny...I mean, unless the MK2 OTA from AT&T came forced.... WHo knows...
He probably didn't know what he was doing, got stuck, and tried to Odin back to stock. Only he used the mk2 package and not the MDL one.
Stuff like that never surprises me anymore. People don't want to learn/read. Just give me the file so I can flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
joeybear23 said:
el o el
Click to expand...
Click to collapse
LOL my butt, buddy...we still have SafeStrap ....ab. 30+ ROMz for it...so not exactly eL Oh eL....but oh well....such is life, ya know?
Red_81 said:
He probably didn't know what he was doing, got stuck, and tried to Odin back to stock. Only he used the mk2 package and not the MDL one.
Stuff like that never surprises me anymore. People don't want to learn/read. Just give me the file so I can flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know EXACTLY what you mean, bud...just gimme the file so I can flash it -type ... who cares what's that gonna actually do to my phone...Oh well, there are people...and there's people.... U never know who you get to deal with....
Just ask for a little help, ...why is that so hard, right?
I've been reading up on all I could, and now that I "kinda" get a better understanding of how things lay with the i337 MK2...I can make a decision to flash, and stay stock...
Problem is, I have been flashing since 2009, so I can't imagine owning a droid, AND NOT FLASH IT!!! IT KINDA DEFEATS THE PURPOSE OF OWNING AN ANDROID, right? hehehe
I know that feeling. At least Safestrap is a decent option. I rushed out to grab my MDL 32gb one before they updated their stock.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
KK 4.4 NB1 baseband
John The Rhino said:
Answer, yes & yes. There is plenty of custom roms for mk2 in the All things mk2 guide. You can also upgrade to 4.4.2 Kit Kat now as well. Forget about MDL cause there's no way to go back to it.
Click to expand...
Click to collapse
***************************************
Yes, prolly could upgrade to 4.4 , but would be needing to flash the NB1 modem, baseband first right?
ANd ppl are saying there is not much SafeStrap versions for KK 4.4(.2) yet, or am I wrong?
DO you know any ROMz like that?
Would it be possible to come back to JB 4.3, once on KK, that you know of?
Lemme know, bud...THX
ANy links.....?
I need to be able to unroot my phone so that I can take it in for repair.
Apparently my phone (SGH-I337 - AT&T) cannot have firmware flashed to it in order to unroot it (apparently because I allowed an update to be installed a while back when I shoudn't have).
There's a lot of people recommending SuperSU for unrooting but the recommended procedures vary (primarily when it comes to which files you should manually delete and when exactly you should delete them) and there's also no mention of whether or not all traces of rooting are removed.
I'm really worried that I'll bring the phone in and they'll find something which indicates that the phone was rooted.
Note: I don't have any custom recovery or firmware installed. The phone has only been rooted using towelroot. Nothing else.
StrabbaClone said:
I need to be able to unroot my phone so that I can take it in for repair.
Apparently my phone (SGH-I337 - AT&T) cannot have firmware flashed to it in order to unroot it (apparently because I allowed an update to be installed a while back when I shoudn't have).
There's a lot of people recommending SuperSU for unrooting but the recommended procedures vary (primarily when it comes to which files you should manually delete and when exactly you should delete them) and there's also no mention of whether or not all traces of rooting are removed.
I'm really worried that I'll bring the phone in and they'll find something which indicates that the phone was rooted.
Note: I don't have any custom recovery or firmware installed. The phone has only been rooted using towelroot. Nothing else.
Click to expand...
Click to collapse
Here is a guide I made for getting back to complete 100% unrooted stock. It's for the GS3, but should work on the GS4 as well. http://forum.xda-developers.com/galaxy-s3-att/general/how-to-restore-device-status-to-t2832880
StrabbaClone said:
I need to be able to unroot my phone so that I can take it in for repair.
Apparently my phone (SGH-I337 - AT&T) cannot have firmware flashed to it in order to unroot it (apparently because I allowed an update to be installed a while back when I shoudn't have).
There's a lot of people recommending SuperSU for unrooting but the recommended procedures vary (primarily when it comes to which files you should manually delete and when exactly you should delete them) and there's also no mention of whether or not all traces of rooting are removed.
I'm really worried that I'll bring the phone in and they'll find something which indicates that the phone was rooted.
Note: I don't have any custom recovery or firmware installed. The phone has only been rooted using towelroot. Nothing else.
Click to expand...
Click to collapse
What firmware version are you on? There is an Odin flashable firmware that'll work on it. The one to uses depends on what your on now.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
What firmware version are you on? There is an Odin flashable firmware that'll work on it. The one to uses depends on what your on now.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Firmware: 4.4.2
Build/baseband number: I337UCUFNI1
StrabbaClone said:
Firmware: 4.4.2
Build/baseband number: I337UCUFNI1
Click to expand...
Click to collapse
Flash the nb1 tar file, it's in the general forum. Then leave it there or you can ota it back to nl1
http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the nb1 tar file, it's in the general forum. Then leave it there or you can ota it back to nl1
http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Wow, thank you very much for that info.! I really appreciate it.
Every set of instructions I had come across told me to flash either the I337ATTAMDL firmware or the I337UCUAMDB firmware, and attempting to flash either of those resulted in a FAIL in Odin.
Before I proceed, can you confirm that flashing this NB1 firmware will not trip KNOX or affect a flash counter (requiring a reset with TriangleAway)?
Also, real quick while I have your attention, do you happen to know of any custom firmware/ROM (eg, a version of CyanogenMod or something similar) that I can flash to my phone? Or am I completely out of luck in that department?
StrabbaClone said:
Wow, thank you very much for that info.! I really appreciate it.
Every set of instructions I had come across told me to flash either the I337ATTAMDL firmware or the I337UCUAMDB firmware, and attempting to flash either of those resulted in a FAIL in Odin.
Before I proceed, can you confirm that flashing this NB1 firmware will not trip KNOX or affect a flash counter (requiring a reset with TriangleAway)?
Also, real quick while I have your attention, do you happen to know of any custom firmware/ROM (eg, a version of CyanogenMod or something similar) that I can flash to my phone? Or am I completely out of luck in that department?
Click to expand...
Click to collapse
Flashing nb1 will not trip Knox. You're out of luck with cm. With the locked bootloader you can only flash touch wiz based roms using safestrap
Sent from my Nexus 9 using XDA Free mobile app
Flashing the NB1 file worked perfectly.
Thanks again! I really appreciate it.