hi all, i'm here because i think here there will be someone expert that can tell me why my htc hd2 doesnt recognize my new tp link router. never happened before. it doesent even see the net, also manually adding ssid and the security stuff it doesnt collaborate. the router model is: tp link TD-W8961ND, 2.4 Ghz... i see it is a NAT router, what does it mean? , should i change some settings in the modem's configuration? thanks
p.s. sorry for bad english
OsarcotL said:
hi all, i'm here because i think here there will be someone expert that can tell me why my htc hd2 doesnt recognize my new tp link router. never happened before. it doesent even see the net, also manually adding ssid and the security stuff it doesnt collaborate. the router model is: tp link TD-W8961ND, 2.4 Ghz... i see it is a NAT router, what does it mean? , should i change some settings in the modem's configuration? thanks
p.s. sorry for bad english
Click to expand...
Click to collapse
*Before I begin, have you tried turning it(the router) off and then back on?*
Are you able to see/connect to the router from other devices? (laptop? another phone? gaming device?)
What security settings do you have set on the router?
Do you have "Broadcast SSID" option (or similar) enabled?
Is your HD2 able to see OTHER wifi networks and connect to them?
Do you have on the router the filtering function active with mac addresses ?
Marvlesz said:
*Before I begin, have you tried turning it(the router) off and then back on?*
Are you able to see/connect to the router from other devices? (laptop? another phone? gaming device?)
What security settings do you have set on the router?
Do you have "Broadcast SSID" option (or similar) enabled?
Is your HD2 able to see OTHER wifi networks and connect to them?
Click to expand...
Click to collapse
ok, in the order... (obviously i tried to on/off the router)
YES, i am connected through PC, htc one and apple ipod.
what do you mean with "security" ? i have WPA2-PSK encryption and AES authentication, SSID and WPS enabled, mac addresses filter disabled, do you need anything else?
i have the option "SSID visibility" enabled, is it comparable? should i turn it off? any consequences?
yes, i connetected it to other wireless "n" router and "g" router without poblems
OsarcotL said:
ok, in the order... (obviously i tried to on/off the router)
YES, i am connected through PC, htc one and apple ipod.
what do you mean with "security" ? i have WPA2-PSK encryption and AES authentication, SSID and WPS enabled, mac addresses filter disabled, do you need anything else?
i have the option "SSID visibility" enabled, is it comparable? should i turn it off? any consequences?
yes, i connetected it to other wireless "n" router and "g" router without poblems
Click to expand...
Click to collapse
Okay, what channels do you have the router set to? And what channel width?
If you have the option "Auto", set both (channels, and channel width) to it. Then restart the router and try connecting now.
Edit: The channel settings should be in the "Wireless" section.
Marvlesz said:
Okay, what channels do you have the router set to? And what channel width?
If you have the option "Auto", set both (channels, and channel width) to it. Then restart the router and try connecting now.
Edit: The channel settings should be in the "Wireless" section.
Click to expand...
Click to collapse
ok, so channel is already set on AUTO, on channel width i have 20 mhz ad 20/40 mhz, actually set on 20/40
EDIT: tried to switch to 20 mhz but no changes
OsarcotL said:
ok, so channel is already set on AUTO, on channel width i have 20 mhz ad 20/40 mhz, actually set on 20/40
EDIT: tried to switch to 20 mhz but no changes
Click to expand...
Click to collapse
Okay, leave the width to 20/40. And set the channel to 1 or 2 and try again.
There are two android apps, one called "Wifi Analyzer" and "WiFi Manager". Download either of them and try scanning for networks from there.
Marvlesz said:
Okay, leave the width to 20/40. And set the channel to 1 or 2 and try again.
There are two android apps, one called "Wifi Analyzer" and "WiFi Manager". Download either of them and try scanning for networks from there.
Click to expand...
Click to collapse
tried with channel 1 and 2, nothing seems to work :crying: ...also the apps dont recognize...
p.s. even if i use wp7 the hd2 doesnt recognize it
OsarcotL said:
tried with channel 1 and 2, nothing seems to work :crying: ...also the apps dont recognize...
p.s. even if i use wp7 the hd2 doesnt recognize it
Click to expand...
Click to collapse
Hmm .. now I'm lost .... If the apps can't pick up the network, I don't know how else you can fix the problem .. sorry..
Marvlesz said:
Hmm .. now I'm lost .... If the apps can't pick up the network, I don't know how else you can fix the problem .. sorry..
Click to expand...
Click to collapse
Don't worry and thanks for trying... Maybe there are some hardware incompatibilities we don't know.... Is there any thread where you think someone can help me?
OsarcotL said:
Don't worry and thanks for trying... Maybe there are some hardware incompatibilities we don't know.... Is there any thread where you think someone can help me?
Click to expand...
Click to collapse
Not really, and I don't really know .. You could try asking for help in the main Q&A forums ... That is this one: http://forum.xda-developers.com/android/help
Related
Hey.. i was wondering if i can make the HDs wifi router to a local LAN ROUTER ONLY.
I will use the phone as a local router to a test environment. In that i mean that i will use the phone as a test router where many clients can connect to, without using my mobilecompany 3g/whatever line.
When you create the wifi router now, you have to select which line i will use with the router.. but i cant deselect, so it only makes a virtual LAN with no internet connection.. Is that possible?
Alfetch said:
Hey.. i was wondering if i can make the HDs wifi router to a local LAN ROUTER ONLY.
I will use the phone as a local router to a test environment. In that i mean that i will use the phone as a test router where many clients can connect to, without using my mobilecompany 3g/whatever line.
When you create the wifi router now, you have to select which line i will use with the router.. but i cant deselect, so it only makes a virtual LAN with no internet connection.. Is that possible?
Click to expand...
Click to collapse
The first problem you have here, is that you can only connect 1 device to the wifi router, not multiple devices. Secondly, it does only route wifi, so I doubt you'd be able to create a LAN even if you could connect more than 1 device.
Have you looked at WMWifiRouter? (http://www.wmwifirouter.com/)
It's not free, but there is a trial version, and I believe it allows you to connect more than 1 device at a time. It would still be an internet connection, but everything would be assigned an IP address from the HD2, so you should be able to use it as a LAN regardless.
Also, it may be possible to use WMWifiRouter with the phone in Airplane mode, so that would obviously give you a LAN with no internet access. Again, you can't do this with the default router, but you may be able to do it with WMWifiRouter.
ok well..
Well... thats not right..
I had 3 computers connected to it today. So the thing that you only can connect 1 to the wifirouter, is sadly wrong...
I tried the thing putting it on airplane mode, but it doesn't work.. thats why i asked here. hehe.
I'll try the software you said
Alfetch said:
Well... thats not right..
I had 3 computers connected to it today. So the thing that you only can connect 1 to the wifirouter, is sadly wrong...
Click to expand...
Click to collapse
Okay, I take that back then. I've never actually tried it myself - that was something I read on here. Goes to show how trustworthy advice on here can be lol
Heheh
Found a crap solution. just create a new connection under connections which doesn't have any relation to your mobilecompany.
bah
Alfetch said:
Heheh
Found a crap solution. just create a new connection under connections which doesn't have any relation to your mobilecompany.
Click to expand...
Click to collapse
well that didn't work either.. hehe.. And the problem you suggested is a "copy" of what the HDs already installed wifi router.. So you dont got that posibility.
Alfetch said:
well that didn't work either.. hehe.. And the problem you suggested is a "copy" of what the HDs already installed wifi router.. So you dont got that posibility.
Click to expand...
Click to collapse
Yeah, I only suggested that really because I thought that the in-built version could only be used for 1 device at a time.
The only thing I can think of now is to set a proxy for the internet connection on your phone, either a fake one, or a real one that simply blocks HTTP requests.
Worth a try?
..
Yup. Ill try that
i'm actually not sure how to do that.. can you tell me how?
Alfetch said:
i'm actually not sure how to do that.. can you tell me how?
Click to expand...
Click to collapse
Yes mate. Go to Settings (or Settings tab, Menu, All Settings) and Connections, Connections, and then "Set up my proxy server". I just tried setting it to my home PC (which has no proxy server running on it) and it allows the data connection, but returns 404 errors for any HTTP requests.
I've just tested this and I get 404 errors when making HTTP requests on my laptop. It seems to do what you need.
Hope it helps mate
GREAT! I will test it thanks m8
Hi,
What is the registry setting (if any) to change the WM 6.5(.x) setting from WiFi channel 1 to any other channel. This is an important setting to get the HD2 WiFi Router to work also in an environment with heavy WiFi traffic around.
Sorry that my attempts to search for a solution has failed. Please feel free to flame me. But when this is done, please post llink to relevant thread, if any.
Regards,
artreides
*bump*
Hi,
I had a problem where no wireless device would pick up my HTC HD2's wireless router. In the end I changed the WiFi channel of my office router and all worked perfectly, so if someone has the answer to how to change the wireless channel on WM6.5 please post it
Maybe the channel gets assigned when you hard reset the phone as I had to change my WiFi router away from channel 11, so I assume the phone is on 11.
Cheers
surely its all done via the router not the phone, the router broadcasts on channel X and the device just accepts on that channel
Is there any solution to this issue? would love to know the answer.
pogipoints said:
Is there any solution to this issue? would love to know the answer.
Click to expand...
Click to collapse
check answer in post #3, the one above yours
Richy99 said:
surely its all done via the router not the phone...
Click to expand...
Click to collapse
@Richy99 & p107r0: can you read in English with understanding?
What about the router function embedded in HD2? artreides is asking about HD2 WiFi Router so please don't reply until you know how to change its channel settings or you've got something really valuable to say
exbros said:
@Richy99 & p107r0: can you read in English with understanding?
What about the router function embedded in HD2? artreides is asking about HD2 WiFi Router so please don't reply until you know how to change its channel settings or you've got something really valuable to say
Click to expand...
Click to collapse
my bad
....
No worries...
... but, going back to the subject: anybody knows how to change it? I don't believe it is locked down to the hardware so there has to be a way to change it software-wise... anybody?
WMwifiRouter has a setting for changing channel but the inbuilt router does not & I have not seen a reg value linked to it in my registry browsing ...
Greetings!
Seem to be having major issues with the adam not picking up non broadcasting SSID ! /hidden ...tried root/enhancement packs ,hidden ssid enabler ..just does not seem to work !
Any pointers appreciated
Thanks and all pointers appreciated
Erm just select " Add new wifi" and place the SSID,password and Encription. Ive done it alot with my network.
LeviathanPT said:
Erm just select " Add new wifi" and place the SSID,password and Encription. Ive done it alot with my network.
Click to expand...
Click to collapse
Adam does not recognise when we add new hidden SSID network manually
It says "not in range" But remembered
As a additional note it is well within range (less than 30 cm away) and all otehr devices laptops,phones connect to this wifi without any issues
Thanks
hi
Does Your Adam see any other network?
.... you can try teach ADAM by switching ssid on your router, connect to it and remembering it, then switch the ssid off and tell us how did it go.
I know its a lot of hassle but you will be our guinea pig this time
WAAAiting For Adam 25 feb 10 march bach
hymm after having a deep toughs..Some routers have a feature of limiting accessibility to set number of users/ Connections ?
maybe this is set on your rooter?
I have a non broadcasting SSID network and it works fine, just be sure if you use WPA or WPA2 the adam sometimes doesnt accept TKIP just AES. Also dont try Wifi N 5Ghz
xiadz said:
hi
Does Your Adam see any other network?
.... you can try teach ADAM by switching ssid on your router, connect to it and remembering it, then switch the ssid off and tell us how did it go.
I know its a lot of hassle but you will be our guinea pig this time
WAAAiting For Adam 25 feb 10 march bach
Click to expand...
Click to collapse
I did try that as a first workaround weeks back ..did not work ...
LeviathanPT said:
I have a non broadcasting SSID network and it works fine, just be sure if you use WPA or WPA2 the adam sometimes doesnt accept TKIP just AES. Also dont try Wifi N 5Ghz
Click to expand...
Click to collapse
Just to confirm this is AES,WPA2 and does not work on linksys
can you let me know how different is the settings on your NI.... which update ,stock or custom ROM , and what was done to connect it to a network with Hidden SSID ...as i sure have exhausted all options ,custom and does not seem to work
Whereas other devices have no issues in attaching to this network
I have a linksys WAG320N
Hello guys .. so I just got my N6P four days ago .. when I first opened it and tried to connect to my home WIFI network .. it refused to do so .. it didn't even detect my network no matter how close I'm to the router .. and strangely it detected every single WIFI network around my house .. all of them .. I tried lots of things including an early factory reset "I think I've made the fastest factory reset in history after only half an hour opening the box LOL " and it didn't work .. I received 4 security updates using my data and it didn't work .. It didn't actually detect the network except for when I changed the network name from the router's page "It was on marshmallow back then"
Now I thought that it got fixed and everything was alright .. I received the official Nougat update the day after this and all worked so fine .. until I disconnected my router and re-opened it .. the mobile didn't detect the network .. AGAIN !
and again it was detecting all the networks around us .. so I changed the network name again and it worked !
now as you can imagine .. this happened with me another 3 times in the past three days .. and it's really annoying .. the mobile is just fantastic but this issue gets under my skin .
any help guys ?
thanks in advance
Any help?
Return it.
How many other Wi-Fi hotspots have you tested your phone with...Friend's house, School, Public, etc? If your phone will see and connect to those, then the issue is your router.
Another thought is you say the phone "can't detect my network". If you mean cannot SEE the network, then you may have the router set to not broadcast the AP. You can still connect using "hidden networks" OR just set your router to broadcast the AP which is the default. Lastly, most routers are dual band, meaning 2.4 and 5 Ghz. Usually each has it's own password (and security settings). Try to connecting to each one, and make sure your security settings are compatible with the phone. (eg. WPA2-PSK AES) vs TKIP. Sounds like you may have some router Wi-Fi configuration issues, more than a phone issue. BUT the first step is to test with other known working Wi-Fi AP's.
I had the same, trying three roms within a few hours.
In the end I had to change a router setting, from "channel 13" to "auto".
v12xke said:
How many other Wi-Fi hotspots have you tested your phone with...Friend's house, School, Public, etc? If your phone will see and connect to those, then the issue is your router.
Another thought is you say the phone "can't detect my network". If you mean cannot SEE the network, then you may have the router set to not broadcast the AP. You can still connect using "hidden networks" OR just set your router to broadcast the AP which is the default. Lastly, most routers are dual band, meaning 2.4 and 5 Ghz. Usually each has it's own password (and security settings). Try to connecting to each one, and make sure your security settings are compatible with the phone. (eg. WPA2-PSK AES) vs TKIP. Sounds like you may have some router Wi-Fi configuration issues, more than a phone issue. BUT the first step is to test with other known working Wi-Fi AP's.
Click to expand...
Click to collapse
Well.. It was my first thought that it was a router configuration issue and I tried all of these things.. Unfortunately nothing worked except for changing the SSID.. What irritates me the most that it already can see and connect to any other wifi "friend's school's etc" it only happens with my own home network.. And my own N6P only.. No other device is affected.. I'm still working on it so yeah
SvenHee said:
I had the same, trying three roms within a few hours.
In the end I had to change a router setting, from "channel 13" to "auto".
Click to expand...
Click to collapse
I'll try this as soon as I'm home and tell you the results.. Thanks for the suggestion
mentalityx said:
Return it.
Click to expand...
Click to collapse
Unfortunately it's not an option.. I live in a country where it's really difficult to get a nexus in here in the first place
But yeah that would have been my first option if it was easy
SvenHee said:
I had the same, trying three roms within a few hours.
In the end I had to change a router setting, from "channel 13" to "auto".
Click to expand...
Click to collapse
Somehow this worked!
I don't understand how .. Or why my phone was the only one affected.. But I'm glad it's done
Thanks my friend
Glad to be able to help someone, usually it's me that needs help
Mi Mi A1 can't connect to my home wi-fi, or if it connects, it will automatically disconnect after a while:
My router appears in the WiFi menu, stating that it is a "saved connection", but when i click on the ssid it just shows that he's trying to connect but then it goes back to the list of wifi networks, without showing any errors etc.
I've got no mac filter on my router so it can't be the new mac randomizer update already stated in the forum.
It all used to work well before updating to Pie (no root, no vpn method).
Thanks for your attention, let me know if i can provide more info about this problem
Identical issues for me, with identical conditions (no root/unlock)...
Anyone knows how to solve? I tried everything but nothing seems to work...
I'm having the same problem but only with some networks. No idea what's causing it.
had the same issue and after disabling "A-MPDU" or switched back to 54g only in router settings it worked again.
Siebenmik said:
Mi Mi A1 can't connect to my home wi-fi, or if it connects, it will automatically disconnect after a while:
My router appears in the WiFi menu, stating that it is a "saved connection", but when i click on the ssid it just shows that he's trying to connect but then it goes back to the list of wifi networks, without showing any errors etc.
I've got no mac filter on my router so it can't be the new mac randomizer update already stated in the forum.
It all used to work well before updating to Pie (no root, no vpn method).
Click to expand...
Click to collapse
I suggest you try to disable the 5 GHz band on the router and see if it helps... on my old router running only on 2,4 GHz wifi works fine, but many other users are reporting problems, so it might be an issue with dual band routers; it's worth a try.
Parnas72 said:
I suggest you try to disable the 5 GHz band on the router and see if it helps... on my old router running only on 2,4 GHz wifi works fine, but many other users are reporting problems, so it might be an issue with dual band routers; it's worth a try.
Click to expand...
Click to collapse
That's not the issue, I have a dual band router in my house and it works just fine.
Potus ThePlant said:
That's not the issue, I have a dual band router in my house and it works just fine.
Click to expand...
Click to collapse
Yet not all users had their MAC address changed with the update, so maybe not every terminal is subject to the issue... just saying.
I have same problem. It was due to change in Mac address during update.. I just simply login to router page...by 191.168.1.1
In wireless>wireless Mac filtering> add it latest MAC address along with new name...save it and try...it worked for me.
ryanee said:
had the same issue and after disabling "A-MPDU" or switched back to 54g only in router settings it worked again.
Click to expand...
Click to collapse
Thanks for your sumbission but unfortunately my modem doesn't support tweaking of AMPDU
What do you mean with 54g?
Manthan ladani said:
I have same problem. It was due to change in Mac address during update.. I just simply login to router page...by 191.168.1.1
In wireless>wireless Mac filtering> add it latest MAC address along with new name...save it and try...it worked for me.
Click to expand...
Click to collapse
I've got no mac filtering enabled on my modem so this is definitely not the problem. Seems a problem with the 5ghz frequency. maybe reduced bands or stability problems - can anyone check which bands are enabled for 5ghz connection?
Apparently the problem is the Modem of the official Pie ROM, because the latest Pie update have issues with LTE bands and WiFi. Hope Xiaomi will release a fix soon!
Enviado desde mi Mi A1 mediante Tapatalk
Same
A1 over home WiFi does not work correctly. Internet access is available, but it is impossible to view mail on gmail, send pictures to tweeter, whatsup. PIE version obtained by OTA, root no. MAC address when updating to PIE changed. There is no filtering on the router by MAC. Range one 2.4. I changed the firmware of the router, did a complete reset of the Mi A1 to the factory settings. Forced to assign DNS. The result on the home router is not reached. 8 Android devices are connected to the router. All work without problems with all resources.
Siebenmik said:
Thanks for your sumbission but unfortunately my modem doesn't support tweaking of AMPDU
What do you mean with 54g?
Click to expand...
Click to collapse
In my modem settings I can deactivate the 801.11n standard and only use 801.11g (with max speed 54mbit). Since AMPDU is a "n" feature it makes sense that this works, too.
I hope Xiaomi will fix this soon, I have issues with other Wifi access points, which I can't change
ryanee said:
In my modem settings I can deactivate the 801.11n standard and only use 801.11g (with max speed 54mbit). Since AMPDU is a "n" feature it makes sense that this works, too.
I hope Xiaomi will fix this soon, I have issues with other Wifi access points, which I can't change
Click to expand...
Click to collapse
Unfortunately, I can't even change this. The only thing my modem allows is turning 5ghz on/off 2.4ghz on/off and manually changing the channel and the band width
Siebenmik said:
Unfortunately, I can't even change this. The only thing my modem allows is turning 5ghz on/off 2.4ghz on/off and manually changing the channel and the band width
Click to expand...
Click to collapse
I suggest you try to change Wi-Fi encryption from Wpa2-psk (AES) to wpa2-psk (TKIP). Other users regained access to their Wi-Fi this way.
Same problem here..... im using MAC filter/TKIP/2.4Ghz (5Ghz OFF), disabled mac filter as workaround waiting for a fix
EDIT: Ok fix found, just remove the previous mac (before update to pie) from the mac whitelist
biondi53 said:
Same problem here..... im using MAC filter/TKIP/2.4Ghz (5Ghz OFF), disabled mac filter as workaround waiting for a fix
EDIT: Ok fix found, just remove the previous mac (before update to pie) from the mac whitelist
Click to expand...
Click to collapse
This is not the fix for this problem - This is a solution to the new FEATURE of android Pie in order to increase Mac Address Security
Parnas72 said:
I suggest you try to change Wi-Fi encryption from Wpa2-psk (AES) to wpa2-psk (TKIP). Other users regained access to their Wi-Fi this way.
Click to expand...
Click to collapse
This worked! Thanks a lot! Hope that they fix this asap because aes is more secure
Siebenmik said:
This is not the fix for this problem - This was a fix for the new feature of android Pie Mac Address Security
This worked! Thanks a lot! Hope that they fix this asap because aes is more secure
Click to expand...
Click to collapse
Sorry just trying to help
Regards!
Dont work
Changing Wi-Fi encryption from Wpa2-psk (AES) to wpa2-psk (TKIP) dont help on Zyxel Keenetic 4G.