Database Users

WiFi data transfer problem

I have a ZyXEL P-2602HW-D1A Wireless router. I have tried all combinations of security, even NO SECURITY WHATSOEVER, and still the device won't transfer data.
Not working;
Firmware: 1.5, Build: CR817
Wifi Router: ZyXEL P-2602HW-D1A
Security: Tried All; WPA2, WPA, WEP & None.
Problem: Connect under all conditions but no data is sent
Please help.

Have you tried another WiFi access point to check the devices WiFi module actually functions?

No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
jbelman said:
Have you tried another WiFi access point to check the devices WiFi module actually functions?
Click to expand...
Click to collapse

For some reason my N800 wouldn't connect to MY ZyXEL P-2602HW-D1A unless I set the device (N800) to disable any kind of wifi powersaving features it had.
On another note, how did you get your hands on the device so early? I'm guessing you are using a Cybercity internet connection? (I'm in copenhagen myself)
edit: I actually came to that solution when i noticed I could connect to OTHER accespoints, but not the Zyxel ones.

Same problem here in France with a Freebox as router

I've noticed under the router's WLAN client list that the device does not have a "Host Name". Would that present a problem?
It is assigned an IP address by the router without any problems, though.
Also the device seems to lose connection and reconnect constantly (every 5-10 seconds).
I done some digging around in the router settings and found an "AnyIP" feature. Would that possibly help?

There are a number of issues floating around. Support for WPA2 seems iffy and some people can just change to WPA or WEP and all work fine.
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
I have seen no solution to this anywhere and believe me I have looked. Some people have given up and got a new router, but this is not a solution.
Can someone confirm that this has been recognised as a fault with the magic and is being investigated, rather then assuming it's a user or router error. There are far too many instances of this across many brands of router for it not to be an issue with the HTC Magic.

zyborg said:
No, I haven't tried that yet, but don't really see the point... I've connected effortlessly to the same WiFi network with my HTC Touch Diamond.
Click to expand...
Click to collapse
What I mean is have you tested the device on ANY other AP except the ZyXEL?

No, but since I'm by far the only one having this issue (try searching the web; see my last post), I didn't feel it was necessary. Just want some input from xda-dev that might solve the problem, if any.
jbelman said:
What I mean is have you tested the device on ANY other AP except the ZyXEL?
Click to expand...
Click to collapse

I've had exactly the same problem earlier with the N800 on the zyxel. Exactly how you describe it.
Did you find out if you could turn off any powersaving features on the HTC?

same problem here
in france with a freebox
I don't exaclty know what router is in the box
but I have excalty the same
I set on never the wifi sleep(powersaving) mode.
i found it in setting wifi menu button then advanced and "never"
but the problem is still here

zyborg said:
There are however a number of people (such as me) who can get a connection perfectly, it shows connection OK, they get an IP from the DHCP server etc, they can even browse a page for a few seconds... but after that no data is sent and everything times out. This is happening on any security from none through to WPA2.
Click to expand...
Click to collapse
I have the exact same problem on mine. I just hope it is not a hardware issue...

Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?

Yes, I tried that also - didn't help one bit.
TheRookie said:
Could be DHCP lease time problem. Did anyone of you tried to set up Magic with Static IP?
Click to expand...
Click to collapse

I also have this problem. Im in Denmark with a Zyxel P660HW-p1.

Another user of Cybercity in Denmark with the same problem.
ZyXEL P-660HW-D1
The android is the only device that doesn't work. I have tried with Iphone and laptops.
I've tried to change the settings on the router to no avail.
Enable 802.11g+ mode [on/off]
RTS/CTS Threshold [2432/4096]
RTS/CTS Threshold [2432/4096]
Max. Frame Burst [600/1800]
The device shows up in the device list with no hostname, the HTC Magic gets the right ip address (using the program WhatIsMyIp to view it)

I had the same problem before, when I set my TP-LINK draft N router with WEP security my HD can see it, connect to it (but speed was slow tho), and my HTC Magic just keep saying its not in range. However, when I set it to open security it works, so I recognise its probably the security setting... so I changed that to WPA2 and then it works.
In my case, I see different device have different tolerance to some settings (in my case, draft N + WEP is OK with laptop, HTC HD, but not Magic), so its still worthwhile to try a few different settings, and try a public wireless access point also to double confirm?

Power save?
I have Zyxel (P-2602R-D1A) router.
I had exactly the same problem with my HTC Vox (winmo)... but that was solved by boosting the WiFi in the phone.
WiFi -> Best performance
So Im guessing magic is in some WiFi "power save" mode...
I dont know how this works, but I thought maybe you could change some WiFi settings behind the hood - that is if the hardware is capable of it.

Zyxel (P-2602R-D1A) router
I am having the same issue with this router as the other posters. The phone connects perfectly and reports an excellent signal, but barely sends or receives any data. I have used a terminal emulator to ping the router and it reports an 82% packet loss. This must be a big problem for many Danish users as it is the standard wifi router provided by two of the major ISP's.

same issue here with my vodafone uk magic.
wifi connects and i can browse for a few seconds then get a connection error and can't browse until i re-start wifi on the magic...
i've actually given up using wifi at home now due to this.
router is a talktalk supplied Huawei Echolife HG520b using 128 bit WEP
i can connect fine via wifi at the office so i don't think it's an issue with the handset, just with certain routers or router configs...
this issue has been reported on the vodafone uk forums but as yet no solution.
http://forum.vodafone.co.uk/index.php?showtopic=31937

wifi signal, but no internet.

Hi
I just received my htc hero, and I really love it.
The only problem is, is that when i try to browse the web it doesnt load webpages. My WiFi is signal is good, i even removed the WEP key but still no succes, and on my old iPhone I can browse the web using the same WiFi connection
Does anyone know what the problem is?
Mike

Can you use the internet on your pc? Is your router setup properly?

yep everything is good..

does obtain an address ??

yes its 192.168.1.101

also if connected, select the menu key and hit advanced, make sure its not set to a fixed (static) address unless you need that.
I have mine set to 14 channels too... not that I probably need that...

i did that and it is not static also set it on 14 channels but no effect

well i had that issue when i just got my hero phone. everything was fine, signal was excellent, dhcp was ok , and it even got an ip but there was no data connection present. The only solution was to update the router's driver. In my case, it was a d link 524.try that too. ( just to precise that i had no problems with my previous phones with the router)
Another thing is to try setting the router to g mode only.

deeren said:
well i had that issue when i just got my hero phone. everything was fine, signal was excellent, dhcp was ok , and it even got an ip but there was no data connection present. The only solution was to update the router's driver. In my case, it was a d link 524.try that too. ( just to precise that i had no problems with my previous phones with the router)
Another thing is to try setting the router to g mode only.
Click to expand...
Click to collapse
yeah i already updated the router and i have set it into G mode..\
im getting crazy xD

Mikeytjee said:
yeah i already updated the router and i have set it into G mode..\
im getting crazy xD
Click to expand...
Click to collapse
what type of router do u have? u might want to search for a hacked driver for it. o know for a fact that u can find a lot for linksys.
try to connect to other AP's just to confirm that the problem is a compatibility issue bet ur phone and ur specific router and not the phone itself.

I got the same problem.
at home it works great with the router.
But at another router by my girl,
it connects to the router but the Internet doesn't work.
Sometimes it works for about 3 minutes.
I couldn't find the problem and her laptop works great
with that router.
The router is a Sitecom Wl-173.
Do you have the same router?

I am having a similar issue. It will work for a few minutes and then although the router signal says good I get no data coming through.
This is only a recent development though as I upgraded from a Linksys WRT54G router to a Linksys WRT160NL (which is Wirless-N), now I know that the Hero doesn't support N but the router is set to mixed mode as I have more G devices than N in my house so it should still work fine.
I will try tonight though swapping the router over to just work in G mode and see how I get on.

Its been suggested that the stock Linksys firmware on all models has issues with the Hero, which is why my old router was OK as it was running Tomato firmware instead of stock Linksys.
I guess I'll just have to wait until a 3rd party releases one for the WRT160NL

I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.

I had a similar problem with my router. What did it for me was to disable all security stuff (WEP / WPA) AND access control (i.e. define which devices may connect to your router). Then try to surf via hero. If surfing works, switch back on security stuff, surfing should still work. At least it did for me.

Svarto said:
I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.
Click to expand...
Click to collapse
I second this, however,if you still have the Di 524,you should know that an update is out and it fixes the connectivity problem.

Svarto said:
I had the same problem with my D-Link 524, i changed it to a netgear and internet has worked perfectly on my Hero since. It is a problem with the D-Link firmware and how it communicates with the Hero.
Click to expand...
Click to collapse
The wifi-stack in the kernel on the hero doesn't work well with many APs. With D-link I've found problems when the boxes run in 802.11n with b/g compatibility. The results are best with the AP locked at 802.11g.

deeren said:
I second this, however,if you still have the Di 524,you should know that an update is out and it fixes the connectivity problem.
Click to expand...
Click to collapse
I have that router and have the Wi-fi connectivity issue on my Hero. I've been looking around for updates for firmware/drivers but haven't been able to find anything.
Do you have a link to the update you used?

spiridk said:
I have that router and have the Wi-fi connectivity issue on my Hero. I've been looking around for updates for firmware/drivers but haven't been able to find anything.
Do you have a link to the update you used?
Click to expand...
Click to collapse
what is your version od the di524? is it the g2 version?

I think it is the G2 version, yes. It does say G2 on the label on the back of the router.

[Q] Galaxy S4 Wi Fi Problem

Hello guys. i am a new user and yesterday i bought a galaxy s4 in turkey (exynos octa 5)
everything seems good but i have a big problem with wi fi but
when i try it with s2, it is working
whenever i want to access internet with wi fi on s4, in Wi fi menu, it writes -----> in order
1) "Obtaining ip adress..." and later
2)saved,secured
3)Obtaining ip adress...
4)failed to obtain ip
5)newtwork disabled becauseinternet connection is low
my modem's security is WPA*Wpa2 psk

iceman1234 said:
Hello guys. i am a new user and yesterday i bought a galaxy s4 in turkey (exynos octa 5)
everything seems good but i have a big problem with wi fi but
when i try it with s2, it is working
whenever i want to access internet with wi fi on s4, in Wi fi menu, it writes -----> in order
1) "Obtaining ip adress..." and later
2)saved,secured
3)Obtaining ip adress...
4)failed to obtain ip
5)newtwork disabled becauseinternet connection is low
my modem's security is WPA*Wpa2 psk
Click to expand...
Click to collapse
Which router do you have?

Will822 said:
Which router do you have?
Click to expand...
Click to collapse
i dont know what does that mean but my modem model is
inca IM-205NX

Does your WIFI have SSID broadcast enabled? I've run into issues with some devices when I had that disabled. What about connecting to other access points?

AliceBToklas said:
Does your WIFI have SSID broadcast enabled? I've run into issues with some devices when I had that disabled. What about connecting to other access points?
Click to expand...
Click to collapse
My galaxy s2 is working and also samsung notebook.. but there is a problem in s4..... i really dont know .... what does it cause by?
my wi fi modem's model is "inca IM-205NX" can you google it? i cannot enter a website link on forum because of new user

i have some news i guess i will solve the problem
when i enter my modem surface, i see modem passward.. as i write before, my modem is inca, and security type Wpa/wpa2 psk..
when i change security type from Wpa/wpa2 psk..to non-security, i can access my wi fi connection. i mean if there is no password on modem, i can reach but it can be dangerous, hackers can intrude....
i will change my modem settings until solve wi fi problem and i will notify you

okey the problem has been solved guys....
i have entered my modem's surface and changed Security type from WPA*Wpa2 psk to Wep and restart both devices
Web is not so secure rather than WPA*Wpa2 psk but the important point is that s4 is working with wi fi

iceman1234 said:
okey the problem has been solved guys....
i have entered my modem's surface and changed Security type from WPA*Wpa2 psk to Wep and restart both devices
Web is not so secure rather than WPA*Wpa2 psk but the important point is that s4 is working with wi fi
Click to expand...
Click to collapse
This is not a solution. Wep can be cracked in 2 minutes and somebody can style your Internet. Change back to wpa2 psk. Changing to wep isn't the smartest selection
Sent from my GT-I9300 using Tapatalk 2

demlasjr said:
This is not a solution. Wep can be cracked in 2 minutes and somebody can style your Internet. Change back to wpa2 psk. Changing to wep isn't the smartest selection
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
but it is not connecting when it is wpa2 ps
what can i do:crying:

Do you have an option to enter the passcode in hex? Seems I ran across an issue some time in the past where I had to do that. Seemed an odd solution but worked for me at the time.

AliceBToklas said:
Do you have an option to enter the passcode in hex? Seems I ran across an issue some time in the past where I had to do that. Seemed an odd solution but worked for me at the time.
Click to expand...
Click to collapse
let me upload a photo for modem surface
http://n1304.hizliresim.com/18/x/ml6xk.jpg
http://n1304.hizliresim.com/18/x/ml6y1.jpg
when settings are like that , it is now working but when i change authentication type as Wep, i can access internet, but the problem is low security

iceman1234 said:
but it is not connecting when it is wpa2 ps
what can i do:crying:
Click to expand...
Click to collapse
Try with WPA2 TKIP or even WPA, but no WEP. WPA should work. There seems to be something wrong with your modem. Isn't there any firmware update for it ?

iceman1234 said:
let me upload a photo for modem surface
http://n1304.hizliresim.com/18/x/ml6xk.jpg
http://n1304.hizliresim.com/18/x/ml6y1.jpg
when settings are like that , it is now working but when i change authentication type as Wep, i can access internet, but the problem is low security
Click to expand...
Click to collapse
So, you could enter the passcode in hex. There's a small chance this could help. You'd have to do the same on the phone obviously as well. Actually, I just realized I don't have that option on my phone (and old Dinc2) so may not even be an option.

AliceBToklas said:
So, you could enter the passcode in hex. There's a small chance this could help. You'd have to do the same on the phone obviously as well. Actually, I just realized I don't have that option on my phone (and old Dinc2) so may not even be an option.
Click to expand...
Click to collapse
thanx for your help alice but i will go crazy
is there anybody who have a galaxy s4 and can share modem surface

Galaxy S4 WiFi problem too
I dont see why this went to a router issue...?? I am having the same problem with the WiFi on my one day old S4. It is almost like the signal freezes because it still shows I am connected with a strong signal but nothing works. I have never encountered a problem before with any other devices(S2, S3 Note2, multple tablets) and saying that it is a router issue and saying that i have to disable security or get a new router is not a solution!
I have seen this same post on multiple forums and yahoo answers but nothing as far as a real answer to the issue or to what is causing the problem. PS...there are two new S4's in the house and both having the same issue....

I'm having the same problem, Brazilian S4, at my girlfriend's house, I could not connect to Wifi, the modem is a Fiberhome HG110-B.

Same issues here unfortunately. I think it's the router. Wifi at work is fine. Wifi at home has issues. That's a bummer because I love my Amped Wireless Router at home.

Same issue
Hi Guys,
So my S4 is also just a day old, and I am having the same issue, tried everything, only connects when I remove my wifi security(obviously not ideal), I am brand new to Android, jumped ship from Apple .
I dont have then exact model number with me now(at work) but my router is a trendNET something something 335.
All my other devices connect to my wireless without issues accept my S4, it is very annoying, we are still being screwed over by our Mobile Operators in South Africa, hence the fact that my wireless is so important to me..
Thanks for the help!

actually we have to wait for new update... hopefully samsung will solve that problem...
i am now using with low securtiy (wep) but i don have any choice now

My fix
My FIX
Hey dudes and chicks,
I used to have this problem too with my s4. Connecting just a minute or two and after it would just lose connection. At first i thought it had to do with something from the hardware, but i figured that was not the problem since it did have a stable wifi connection at my uni.
So the problem for most of the people is within the router. Here's how i solved it for me. (I have a Sitecom Wireless Media Router 300N WL-350 with 2.4 and 5 ghz, so the steps might differ a bit if you have different router)
-------------------------------------
1. Login to your router
2. Go to the setting for wireless 2.4 (probably radio 1) (For Sitecom go to tab Basic> subtab Wireless 2.4 GHz)
So what i changed here is the 802.11 mode. (there are several modes like: just 802.11b, just 802.11g, just 802.11n, mixed 802.11b and 802.11g, mixed 802.11g and 802.11n ........)
>>> I Put It On: "mixed 802.11g and 802.11n"<<< (it used to be on mixed 802.11b, 802.11g and 802.11n)
3. Secondly i disabled Auto Channel Scan. This allowed me to select a Wireless Channel (frequency/channel).
>>>I Chose the highest channel ("2.472 GHz - CH13")<<<
4. I used to have the Transmission Rate at the option "best (automatically)"
>>>I changed this to the option: "54" (Mbit/s)<<<
5. I have channel width at the option: "auto 20/40 MHz" (but it always used to be this one)
Furthermore i have the following settings:
> Security mode: "WPA - Personal"
> WPA Mode: "WPA or WPA2"
> Cipher Type: "TKIP and AES"
------------------------------------
Now running stable for more than 6 hours (incl heavy use like youtube and movie streaming from samba server). I believe that step 2, 3 and 4 are the most important ones. If this does not work immediately, try to play a bit with step 3 and 4
Im not that technical but if you have questions feel free to ask.
Help out your fellow Galaxy mate by letting them know whether this worked or not ;-p
Ill also post my fix at this thread http://forum.xda-developers.com/showthread.php?t=2253471
Greetings,
ps sorry if i made some grammer mistakes, not my native language

WIFI Trouble

Hello guys .. so I just got my N6P four days ago .. when I first opened it and tried to connect to my home WIFI network .. it refused to do so .. it didn't even detect my network no matter how close I'm to the router .. and strangely it detected every single WIFI network around my house .. all of them .. I tried lots of things including an early factory reset "I think I've made the fastest factory reset in history after only half an hour opening the box LOL " and it didn't work .. I received 4 security updates using my data and it didn't work .. It didn't actually detect the network except for when I changed the network name from the router's page "It was on marshmallow back then"
Now I thought that it got fixed and everything was alright .. I received the official Nougat update the day after this and all worked so fine .. until I disconnected my router and re-opened it .. the mobile didn't detect the network .. AGAIN !
and again it was detecting all the networks around us .. so I changed the network name again and it worked !
now as you can imagine .. this happened with me another 3 times in the past three days .. and it's really annoying .. the mobile is just fantastic but this issue gets under my skin .
any help guys ?
thanks in advance

Any help?

Return it.

How many other Wi-Fi hotspots have you tested your phone with...Friend's house, School, Public, etc? If your phone will see and connect to those, then the issue is your router.
Another thought is you say the phone "can't detect my network". If you mean cannot SEE the network, then you may have the router set to not broadcast the AP. You can still connect using "hidden networks" OR just set your router to broadcast the AP which is the default. Lastly, most routers are dual band, meaning 2.4 and 5 Ghz. Usually each has it's own password (and security settings). Try to connecting to each one, and make sure your security settings are compatible with the phone. (eg. WPA2-PSK AES) vs TKIP. Sounds like you may have some router Wi-Fi configuration issues, more than a phone issue. BUT the first step is to test with other known working Wi-Fi AP's.

I had the same, trying three roms within a few hours.
In the end I had to change a router setting, from "channel 13" to "auto".

v12xke said:
How many other Wi-Fi hotspots have you tested your phone with...Friend's house, School, Public, etc? If your phone will see and connect to those, then the issue is your router.
Another thought is you say the phone "can't detect my network". If you mean cannot SEE the network, then you may have the router set to not broadcast the AP. You can still connect using "hidden networks" OR just set your router to broadcast the AP which is the default. Lastly, most routers are dual band, meaning 2.4 and 5 Ghz. Usually each has it's own password (and security settings). Try to connecting to each one, and make sure your security settings are compatible with the phone. (eg. WPA2-PSK AES) vs TKIP. Sounds like you may have some router Wi-Fi configuration issues, more than a phone issue. BUT the first step is to test with other known working Wi-Fi AP's.
Click to expand...
Click to collapse
Well.. It was my first thought that it was a router configuration issue and I tried all of these things.. Unfortunately nothing worked except for changing the SSID.. What irritates me the most that it already can see and connect to any other wifi "friend's school's etc" it only happens with my own home network.. And my own N6P only.. No other device is affected.. I'm still working on it so yeah

SvenHee said:
I had the same, trying three roms within a few hours.
In the end I had to change a router setting, from "channel 13" to "auto".
Click to expand...
Click to collapse
I'll try this as soon as I'm home and tell you the results.. Thanks for the suggestion

mentalityx said:
Return it.
Click to expand...
Click to collapse
Unfortunately it's not an option.. I live in a country where it's really difficult to get a nexus in here in the first place
But yeah that would have been my first option if it was easy

SvenHee said:
I had the same, trying three roms within a few hours.
In the end I had to change a router setting, from "channel 13" to "auto".
Click to expand...
Click to collapse
Somehow this worked!
I don't understand how .. Or why my phone was the only one affected.. But I'm glad it's done
Thanks my friend

Glad to be able to help someone, usually it's me that needs help

Wifi issues with no known fix....

I recently picked up an 8 Pro and an 8t.
Same issue.
Can connect to wifi, no internet.
Reset router, tried all different security settings, forced both on to 2.4 and 5ghz bands only, changed channels on the router, factory resets, used device MAC, Bluetooth off, etc.
No go. I can't get them to connect, period.
Asus AC86U and AC5300 in a mesh setup. I even took the mesh setup down and just used the 86u.
All other devices on my network have no issues, including a 6t, 7 Pro and a 7t. Just the 8 Pro and 8t. Both brand new, received this week. Updated to the latest official 11 OS from OnePlus.
20+ devices on the network with no issues.
I have searched the net high and low to resolve the issue. Plenty of reports of the same issues, no solid resolution. Plenty of bug reports sent to OnePlus.
Any known fixes would be great, that aren't listed above.

Your oneplus devices, are they rooted?
Or pure stock? Where did you get them? Completely official? Which variant?
Wifi being borked is a common symptom of having an incorrect boot.img installed, usually happens when rooting and using an incorrect patched boot.img, phone will boot and will appear ok but wifi won't work.
As the same symptom has happened on two identical devices i'd say there are two main possibilities off the top of my head.
1. If the devices have been unlocked and rooted, then they weren't done properly and have the wrong boot img
2. You have a limit set on your router, get a third phone and set up a hotspot, see if the wifi is functional to eliminate the phones, then just need to troubleshoot your router.
If the phones are pure stock and functional on other networks, and you can add an additional device to your router (one that hasn't been added before) then that's odd.
Did you change the name of your router and the wifi networks have synced over?
remove any previously saved wifi networks from both devices, then try again.

I have the same issue and no fix...

dladz said:
Your oneplus devices, are they rooted?
Or pure stock? Where did you get them? Completely official? Which variant?
Wifi being borked is a common symptom of having an incorrect boot.img installed, usually happens when rooting and using an incorrect patched boot.img, phone will boot and will appear ok but wifi won't work.
As the same symptom has happened on two identical devices i'd say there are two main possibilities off the top of my head.
1. If the devices have been unlocked and rooted, then they weren't done properly and have the wrong boot img
2. You have a limit set on your router, get a third phone and set up a hotspot, see if the wifi is functional to eliminate the phones, then just need to troubleshoot your router.
If the phones are pure stock and functional on other networks, and you can add an additional device to your router (one that hasn't been added before) then that's odd.
Did you change the name of your router and the wifi networks have synced over?
remove any previously saved wifi networks from both devices, then try again.
Click to expand...
Click to collapse
Both phones stock, new out of the box.
Connected both phones to a Hotspot to get them updated to the most recent official releases.
Still the same issues.
As stated in OP, I have searched the net high and low for a fix.
Seems to be a common problem, that hasn't really been addressed.
I don't rule out my network, but again, what more can I change that I haven't already?
20+ devices on the same network, without a problem.
Just doesn't make sense.

shanetrain said:
Both phones stock, new out of the box.
Connected both phones to a Hotspot to get them updated to the most recent official releases.
Still the same issues.
As stated in OP, I have searched the net high and low for a fix.
Seems to be a common problem, that hasn't really been addressed.
I don't rule out my network, but again, what more can I change that I haven't already?
20+ devices on the same network, without a problem.
Just doesn't make sense.
Click to expand...
Click to collapse
So you were able to connect to a hotspot over WiFi just not your router? Have you tried other routers? I recently switched my router and my oneplus (which worked fine on the previous router) I ky connects to the 5ghzfrequency. Will not connect to 2.4ghz no matter what. It also works fine with the routers at work. Don't know why, I've tried everything, but it refused to connect at that frequency on that specific netgear router.

Hi, try to change between WPA2-PSK/TKIP or AES settings.

shanetrain said:
Both phones stock, new out of the box.
Connected both phones to a Hotspot to get them updated to the most recent official releases.
Still the same issues.
As stated in OP, I have searched the net high and low for a fix.
Seems to be a common problem, that hasn't really been addressed.
I don't rule out my network, but again, what more can I change that I haven't already?
20+ devices on the same network, without a problem.
Just doesn't make sense.
Click to expand...
Click to collapse
Hang on if your phones were able to connect to a hotspot then it's your router or the signal from your router.
A WiFi hotspot is a normal WiFi signal so there's nothing wrong with the phones.
I'd say it's the router.
Go to 192.168.0.1 on a web browser on a device connected to your router, check the device list, is there a max allowed devices? 20 isn't an uncommon limitation.
Delete the WiFi SSID from your phone (forget network)

mikewilc said:
Hi, try to change between WPA2-PSK/TKIP or AES settings.
Click to expand...
Click to collapse
OnePlus is capable of all of them.
But you're on the right track, it's the router.
It has to be

Apologies, i meant on router check security settings of wifi.

mikewilc said:
Apologies, i meant on router check security settings of wifi.
Click to expand...
Click to collapse
Yea it'll be a setting or a limitation has been reached..