Help : when i unplug the device he is still showing usb connection and charge so when i plug it again i cannot access my computer with the phone...i have to unplug the battaries and then its o.k for 1 time...
sassonno1 said:
Help : when i unplug the device he is still showing usb connection and charge so when i plug it again i cannot access my computer with the phone...i have to unplug the battaries and then its o.k for 1 time...
Click to expand...
Click to collapse
The most obvious questions would be: have you tried to reflash or change cable? Haha
I know you're not completly neuuub, so I guess you tried both
Maybe it's hardware related problem :/
just destroy the socket
tys0n said:
The most obvious questions would be: have you tried to reflash or change cable? Haha
I know you're not completly neuuub, so I guess you tried both
Maybe it's hardware related problem :/
Click to expand...
Click to collapse
put screwdriver to the socket and it fix the problem ...i put again and destroyed it ...tomorrow i'll replace the socket 25$ worth
sassonno1 said:
put screwdriver to the socket and it fix the problem ...i put again and destroyed it ...tomorrow i'll replace the socket 25$ worth
Click to expand...
Click to collapse
Haha, good luck, then bad luck. Bummer! Anyway, good luck with the replacement
Related
Hi everybody.
I don't know, what is going on with my Att 8525.
I bought this earphones for it like 3 months ago, and they do work. I mean, the audio is coming out from the USB Connector.
But, when I plug it to my computer, it does not detected at all. I plug in to power and does not charge. But if I connected back to the earphones, sounds comes out.
I already try to do a soft reset, delete everything, and start from scratch, but it does not wants to charge or connect to Activesync.
If there is someone, that can help me, please tell me.
I'm guessing here, but it seems to me that the constant use of the EXT port (via inserting/removing your headphones) has possibly damaged the EXT port internally (ie dislodged it from PCB). I believe the ports on WM machines in general tend to be a major point of failure due to the physical stress due to insertion/removal
I had a 2.5mm port on my HP rw6828/Atom clone fail on me after using it for a while to connect my headphones.
The thing is, I only used the Headphones one time.
I was at work watching some comedy show on my phone. So battery was running low. I close down everything, disconnected the headphones and connected to my works computer through USB, but then Activesync didnt detected nor the phone.
So i reseted the phone, and try again to connected to the computer and yet still didnt want to connect.
I went home, and tried to connected to laptop as well, and the charger and nothing. It didnt want to charge at all.
So I had to buy a battery charger to charge the battery, that's the only way to charge my phone.
If you have any idea, what's going on, please help me, to resolve this problem.
hey did you get solution to your problem? if yes please let me know..i have same problem except i dint check with ear phones..
teluguone12 said:
hey did you get solution to your problem? if yes please let me know..i have same problem except i dint check with ear phones..
Click to expand...
Click to collapse
If after a hard reset the problem persists then:
As suggested above, it is likely a cracked solder joint on the USB to motherboard OR a bent pin in the phones USB port. Check this with a magnifying glass.
Mike
thanks for reply..do you have any idea where can i fix if it is problem with connection to motherboard
Perhaps if you say the city/town where you live someone might be able to suggest a shop that does repairs without sending your phone away.
Mike
iam in tampa,florida. if you can suggest me any shop that would be helpful..although this is my backup phone i dont want to keep it idle..
teluguone12 said:
iam in tampa,florida. if you can suggest me any shop that would be helpful..although this is my backup phone i dont want to keep it idle..
Click to expand...
Click to collapse
I don't know but does anyone in Tampa know of a shop that does on site repairs?
Mike
thanks...will enquire it..
will the phone charge with the wall plug, or only fails charge connected to computer? I had a problem with the computer once, I just went into device manager and uninstalled the USB hubs, they reinstalled fine afterwards and work great (have to do this every few months, probably because I never use the safely remove crap)
koikaze said:
will the phone charge with the wall plug, or only fails charge connected to computer? I had a problem with the computer once, I just went into device manager and uninstalled the USB hubs, they reinstalled fine afterwards and work great (have to do this every few months, probably because I never use the safely remove crap)
Click to expand...
Click to collapse
no its not working either with usb or wall charger......
I am sorry if this already exists.
When I installed CM10 Nightly 02-Oct I noticed that when charging (both wall charger and USB cable) the phone does not show that is charges.. but it does.. and normally, 2-3 hours is full.
Also, there is no way to get the PC to find phone. When I connect it via USB cable it does not do anything.. only quietly charging.
Download mode and ODIN.. I tried... nothing.
Is there a problem with the port? But then how come and it charges?
So so weird!!
Thank you in advance
7kartoon said:
Is there a problem with the port? But then how come and it charges?
Click to expand...
Click to collapse
try changing USB cable or a solution from My Android Solutions
xsenman said:
try changing USB cable or a solution from My Android Solutions
Click to expand...
Click to collapse
Thank you for the reply.
I tried everything.
Different laptop.
Different cable.
Different charger.
USB drivers(Google drivers and reinstalled samsung drivers and tried KIES)
The phone does not react when I plug in the charger or cable. Only quietly charges.
Even in Odin and Download mode it is not recognised(even the sound that a PC makes when you put something in USB is not there). What is wrong?
At least thank God it is charging.
7kartoon said:
Even in Odin and Download mode it is not recognised(even the sound that a PC makes when you put something in USB is not there). What is wrong?
At least thank God it is charging.
Click to expand...
Click to collapse
Its possible one of pins could be damaged in the Micro USB, externally or internally , try cleaning like here or this
Hi,
I woke this morning to 19% charge after 6 hours.
When I try to charge it through the mains whilst turned off, it just vibrates every 2 seconds and shows a line across the screen as though something was going to show but stopped. Kind of thing you would see with a knackered screen.
Whilst I type this, I keep getting USB device not recognised as it connects and disconnects however the charge is still showing but doesnt seem to be putting anything into the phone.
The phone knows the charger is in, and shows but nothing is going in.Battery drain..
Charge only via Qi charger!!
PC also didnt see phone..
Try carefully cleaning the USB port with a needle or toothpick (under the USB pin as well!). Might be something metallic in there interfering with the connection.
I'm assuming other USB chargers and cables also do not work?
ShadowLea said:
Try carefully cleaning the USB port with a needle or toothpick (under the USB pin as well!). Might be something metallic in there interfering with the connection.
I'm assuming other USB chargers and cables also do not work?
Click to expand...
Click to collapse
Yes, others two original Samsung 3.0 don't work and old usb cable 2.0 also..
Barmenchik said:
Yes, others two original Samsung 3.0 don't work and old usb cable 2.0 also..
Click to expand...
Click to collapse
Try the cleaning, if that doesn't help try cleaning the contact points on the battery and its slot with a bit of denaturated alcohol and a cotton swap.(for sale in any drugstore).
If that doesn't help either, and you have one within reach, try another battery. And if that doesn't help, it's likely the motherboard.
ShadowLea said:
Try the cleaning, if that doesn't help try cleaning the contact points on the battery and its slot with a bit of denaturated alcohol and a cotton swap.(for sale in any drugstore).
If that doesn't help either, and you have one within reach, try another battery. And if that doesn't help, it's likely the motherboard.
Click to expand...
Click to collapse
Battery ok. With wireless Qi charger, everithing ok. Till 100% for 1.5-2 hours..
Hey there...
Having a huge problem with S4...
It is not charging when plugged into wall charger and its not connecting to PC... Tried reflashing no help
JeKaSBaLTo said:
Hey there...
Having a huge problem with S4...
It is not charging when plugged into wall charger and its not connecting to PC... Tried reflashing no help
Click to expand...
Click to collapse
Hi
If you tried different cables ( and chargers) and is not conecting to the pc it may be the usb port in your phone...maybe is just dirty if not it maybe loose or defective , take it to a local service shop to be replaced....
I guess thats only thing left... the funny part there is no animation of charging but it charges a lil bit much slower then usualy... but ... i guess it is the usb port
But the weird part is,.. when i turn off the phone and plug the cable in it says charging then turns on the phone and then again no charge....
JeKaSBaLTo said:
I guess thats only thing left... the funny part there is no animation of charging but it charges a lil bit much slower then usualy... but ... i guess it is the usb port
Click to expand...
Click to collapse
sound like it , it happens a lot , usually they get loose a cold solder point breaks....should be easy to fix
Will i be able to fix it my self or should i take it to repair shop?
JeKaSBaLTo said:
Will i be able to fix it my self or should i take it to repair shop?
Click to expand...
Click to collapse
you can always take it apart and check it out.....if it looks to hard just take it to the shop , soldering in those boards is not easy if you do not have experience...
Hi.
My Mi A1 is completely dead after charging. Its not responding when pushing the power button for a long time either.
No charge led , no nothing. It isnt even detected by the pc .
It was fully stock, no root or bootloader unlock.
To my knowledge this dosent look very promising.
Have any of you experienced this, is there any hope?
Thanks
KnieveI
Have you tried to charge with another cable?
datasource said:
Have you tried to charge with another cable?
Click to expand...
Click to collapse
Yes i have tried different cables and chargers.
It doesent pull any current from the charger. Tested with a watt meter.
Thanks
KnieveI
?
Try connect ur phone to Linux machine and check if linux kernel can detect anything if not ur phone dead.
U need need to change motherboard or rewrite emmc partitioning data.
Maybe the battery empty and ur phone type c port damaged?
Maybe ur phone shocked be electricity ? and cpu damaged.
I just had given u all the options...
KnieveI said:
Yes i have tried different cables and chargers.
It doesent pull any current from the charger. Tested with a watt meter.
Thanks
KnieveI
Click to expand...
Click to collapse
Is it in warranty period? If yes send it back.
I think your phone is in EDL MODE
Try to connect it to the laptop and see if they recognize it if yes flash it with miflash tools
datasource said:
Is it in warranty period? If yes send it back.
Click to expand...
Click to collapse
It is but i bought it on Ali Express. Thats really not an option.
I think i buy another one and keep this one for spare parts.
Its the first time this has happened to me,and this one was total stock.
I have flashed the cr,,, out of many dozens of phones
but always been able to unbrick them.
I guess i was out of luck and something went wrong with the cable or charger.
Thanks
KnieveI