Database Users

help needed!!! stuck odin recovery on stock image

<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please any help????

nonliner said:
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please any help????
Click to expand...
Click to collapse
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Edit: Use Odin 3.07 / 3.04
If u are flashing firware try using diffrnt firmware and see result may be better in cases due to new and old firmware

SOLVED!!!
DO NOT USE virtual machine on a Mac!
find a regular PC with win7
and do exactly what samersh72 says here: http://forum.xda-developers.com/showthread.php?t=2265477

SOLVED
SOLVED!!!
DO NOT USE virtual machine on a Mac!
find a regular PC with win7
and do exactly what samersh72 says here: http://forum.xda-developers.com/showthread.php?t=2265477

[Odin] Pit re-partition takes no effect

Hi
I tried to re-partition my Samsung S3 mini with a custom pit file with Odin v3.07. This is Odin output, looks ok:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
I'd like to remove the recovery partition and resize following system partition instead. The download menu on the device prints a red warning "Custom pit file", which I ignore.
After rebooting the device, I can't see any change, the recovery image still boots and the red flag in the download mode disappeared.
Why does it not work, I tried already different checkbox combinations on Odin.
Regards
Edit:
The problem was, that I tried to repartition the device without flashing the images. Instead of Odin, Heimdall throws an error.

Bricked S4

<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to install stock Brazil 4.4.2, then my pit file was missing
Downloaded Stock 4.3 and tried again with pit file now i got auth failed
I ticked re-partition and im using CSB_signed_Fusion3_EUR_0325_V2
i dont know waht do anymore... pliz help

NotaHue said:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to install stock Brazil 4.4.2, then my pit file was missing
Downloaded Stock 4.3 and tried again with pit file now i got auth failed
I ticked re-partition and im using CSB_signed_Fusion3_EUR_0325_V2
i dont know waht do anymore... pliz help
Click to expand...
Click to collapse
You can no longer downgrade your phone to 4.3 after Flashing 4.4.2 firmware mate and and you might wanna Check this thread

but installation on 4.4.2 failed too so i need pit file for 4.4.2?
i was in 4.3 bootloader then i was trying to install 4.4.2 sotck but failed (missing pit file)

NotaHue said:
but installation on 4.4.2 failed too so i need pit file for 4.4.2?
i was in 4.3 bootloader then i was trying to install 4.4.2 sotck but failed (missing pit file)
Click to expand...
Click to collapse
Ask from this thread mate , Im sure Samersh or malybru can help you fix this situation . Have a nice day

unbrick galaxy S5

Hi
I have a Galaxy S5 G900A, I tried to Root it but I forgot to put it to debugging Before, and it went into the brick.
I tried to burn him again 5 Android version of AT & TFirmware, but it failed.
I tried to burn it to the full original version of .4.4.2 Firmware includes all the files BL CSC CP and AP, But Odin writes failed.
Samsung Kies files to Recognize it
It has nothing to do?

Wait, Debugging mode you mean Download Mode?
You can try This Method For Unbricking.
Go to Sammobile and download the lastest stock rom, download chainfire and put PA on odin and flash it on Download Mode.

What version of Android was your phone on?
The ATT version of the S5 has a locked/encrypted bootloader, and if you already had lollipop, you can't downgrade to 4.4.2.
You can only flash the most current 5.x roms in ODIN if your phone already has 5.x

Was Installed Android 5.0
I tried to just a Root it at first but I forgot to bring the situation Dibging, then it became bruck
Currently unable to install the Android File AP 5. course in download mode.
Where can I get the full Framework 5 and G900A Android?

<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

S8 stuck booting. Cant access recovery. Flashing via Odin failed.

Ive been told if anyone can fix my issue it is you guys,
As mentioned the phone wont boot and is stuck on the logo/powered by android screen.
Everything is stock Samsung.
I can not access recovery mode but can access download mode.
I downloaded the lastest offical Samsung firmware for my model (SM-G950F. BTU. G950FXXS5DSJ1) and using Odin tried to flash.
This did not work, i have pasted the log below, but basically it starts but then doesnt progress. Nothing happens, the phone does not reboot or do anything for that matter other than stay on the downloading screen.
Any advice would be appriciated,
Cheers
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4162 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> up_param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img

Is the device model on bootloader the same as firmware?
I remembered that similar issue happens when there's a problem with the kernel (boot.img) either it wasn't flashed correctly, or is older than the actual firmware.
Have you tried Odin 3.13.3 which is specially for One UI?
https://www.and roidsage.com/2019/07/02/download-latest-odin-3-13-3-for-installing-and roid-9-0-pie-oneui-samsung-firmware-update-and-usb-drivers/
(Remove spaces)

Thanks for your reply,
I have tried both 3.13.3 (cant remeber when i downloaded from) and 3.13.1 found here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Neither worked.
Is bootloader and download mode the same thing? If so it says product name: SM-G950F which does correspond to the firmware ive downloaded.