Ive been told if anyone can fix my issue it is you guys,
As mentioned the phone wont boot and is stuck on the logo/powered by android screen.
Everything is stock Samsung.
I can not access recovery mode but can access download mode.
I downloaded the lastest offical Samsung firmware for my model (SM-G950F. BTU. G950FXXS5DSJ1) and using Odin tried to flash.
This did not work, i have pasted the log below, but basically it starts but then doesnt progress. Nothing happens, the phone does not reboot or do anything for that matter other than stay on the downloading screen.
Any advice would be appriciated,
Cheers
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4162 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> up_param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
Is the device model on bootloader the same as firmware?
I remembered that similar issue happens when there's a problem with the kernel (boot.img) either it wasn't flashed correctly, or is older than the actual firmware.
Have you tried Odin 3.13.3 which is specially for One UI?
https://www.and roidsage.com/2019/07/02/download-latest-odin-3-13-3-for-installing-and roid-9-0-pie-oneui-samsung-firmware-update-and-usb-drivers/
(Remove spaces)
Thanks for your reply,
I have tried both 3.13.3 (cant remeber when i downloaded from) and 3.13.1 found here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Neither worked.
Is bootloader and download mode the same thing? If so it says product name: SM-G950F which does correspond to the firmware ive downloaded.
Related
I am flashing because probably Android got broken (it stays at Samsung logo). Odin flashed some files but it got stuck at "BcmCP.img". What should I do?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> param.lfs
<ID:0/003> sbl.bin
<ID:0/003> system.img
<ID:0/003> BcmCP.img
Click to expand...
Click to collapse
Try with odin v1.85.
I am using 1.85.
are you using the firmware from dokys thread at top of dev section?
if you downloaded it from sammobile you need to split it into three files pda csc and modem using the splitter tool
you cannot flash with a single firmware file on galaxy y
you dont need to use the pit file
I actually fixed that - problem was in broken /data partition that I fixed by using this: http://forum.xda-developers.com/showthread.php?t=2122370
Hello, I have tried updating my N9005 to the latest firmware 5.0 provided on Sammobile. After attempting to flash it via ODIN, the following error occurs:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Retried this step several times, but i have received the same error.
Following a few instructions found on the XDA forums, I tried using PIT file in order to re-partition.
The phone now reboots but will not go past the first boot screen "Samsung Galaxy Note3 N9005".
I tried pulling out the battery and performing a factory reset (along with wiping caches), but the situation is still the same after rebooting the device.
Also I have noticed that upon accessing "recovery mode", a error stating " Failed to mount /system (Invalid argument)" error is displayed.
I'm pretty new at upgrading phones and I've bought this phone recently and was unaware of the consequences of flashing ROMS via Odin.
The initial fw. on the device was 4.4.2 Official Samsung. Is there any way that I can make the phone reboot normally with fw. 4.4.2? Or any other firmware for that matter?
Thanks in advance.
AndreiRonaldo said:
Thanks in advance.
Click to expand...
Click to collapse
Reflash the firmware again now via ODIN without the .pit file.
Joku1981 said:
Reflash the firmware again now via ODIN without the .pit file.
Click to expand...
Click to collapse
I've tried that several times without success. But the issue was fixed. Apparently the PIT file I was using did not match the ROM i was flashing. I just had to find a matching pair of both ROM and PIT and now I've successfully booted my device. Hope that this thread might help others in need for answers to similar questions.
Alright, this is taking alot more than i had expected, after finally managing to boot my device, I've noticed that flashed rom behaves awfully, my phone is stuttering, and i have no sound. Also, my IMEI is displayed as "Unknown" in the "Status'" section of the device's Settings. Any suggestion on how to fix this issue?
flash the stock the rom you have before
Hi
I have a Galaxy S5 G900A, I tried to Root it but I forgot to put it to debugging Before, and it went into the brick.
I tried to burn him again 5 Android version of AT & TFirmware, but it failed.
I tried to burn it to the full original version of .4.4.2 Firmware includes all the files BL CSC CP and AP, But Odin writes failed.
Samsung Kies files to Recognize it
It has nothing to do?
Wait, Debugging mode you mean Download Mode?
You can try This Method For Unbricking.
Go to Sammobile and download the lastest stock rom, download chainfire and put PA on odin and flash it on Download Mode.
What version of Android was your phone on?
The ATT version of the S5 has a locked/encrypted bootloader, and if you already had lollipop, you can't downgrade to 4.4.2.
You can only flash the most current 5.x roms in ODIN if your phone already has 5.x
Was Installed Android 5.0
I tried to just a Root it at first but I forgot to bring the situation Dibging, then it became bruck
Currently unable to install the Android File AP 5. course in download mode.
Where can I get the full Framework 5 and G900A Android?
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello i have a problem with flashing anything with odin on my Samsung Galaxy S4 9505.
Whenever i try flashing ROM or recovery or whatever, it says this:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also when i try to boot my phone normally or go to the recovery it says this:
"Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again."
I've downloaded Kies and tried to recover it but it says:
'GT-I9505' does not support initializing.
What i've tried so far:
flashing pit file with and without the rom.Tried multiple odin versions.Tried multiple rom versions.Tried flashing recovery CWM and TWRP.
Also the error i got "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again." was after i tried flashing official rom 4.4.2 downloaded form Sammobile(first i installed TWRP recovery wiped system data dalvic cache and booted in download mode ). I was previously using latest Android 5.0.1 official.
Is there any hope of unbricking my device?
Have you tried reinstalling your ADB driver?
Honestly, kies sucks. You don't need kies to have ADB driver installed. There is a package that install samsung drivers seperately.
Once you upgraded to a lollipop bootloader you can't just simply go back to a kitkat one. Samsung doesn't allow that.
Try using the back USB ports on your PC. Trust me, it can do wonders.
You could also try Heimdall.
well i think i've advanced abit now i get this:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
tried to reinstall the ADB driver and using the back ports.
Also is there any way to flash Official Samsung ROM true a custom recovery?Cuz i just managet to install TWRP recovery on it.
hollydamn i just tried flashing true odin Android 5.0.1 and it worked.But the wifi isn't working it just not letting me turn it on.
Why don't people understand when I say YOU CANNOT DOWNGRADE ?
i didn't downgrade it now i've installed 5.0.1.
simeon112 said:
i didn't downgrade it now i've installed 5.0.1.
Click to expand...
Click to collapse
Yes, but you tried to, even after I explicitly said you can't.
Your WiFi issues might be related to modem/kernel.
You could try flashing a different firmware.
I tied a differed one the wifi works now.Only when i turn on the mobile data and try to go to a random site it says Forbidden.I think i need to wait my carrier to send me the setting for the net...
Anyway THANK YOU very much!! <3
I have an i337m (North American version of s4) and you can downgrade from stock 5.01 to stock 4.4.2. I did this on 3 phones in order to use regionlockaway to sim unlock all three phones. Everything worked, including data and wifi.
I'd like to try a downgrade with a i9505 for curiosity sake but that particular model is not sold by carriers in Canada.
Hello all,
So ill make this short and sweet, I have an S5 the G900F and it wont boot, it just turns on, shows the Galaxy S5 logo, then appears to start the next Samsung logo but crashes instantly and restarts (does this on a loop)
I have attempted to use odin and flash using the latest firmware I believe to be correct for the phone, to which it fails at the end on "complete write operation failed". I then proceeded to try the recovery.tar file from the same rom and it worked (took about 10 seconds total) but im still getting the same loop.
Tried Kies and all that jazz, literally doesn't even see the phone so cant do jack, recovery mode doesn't boot, all I can get is download mode (home+vol down+power)
I would be ever so grateful if someone knows the answer to this as its driving me insane.
p.s. im by no way good with android so if im missing something blatantly obvious shout it out.
Where am I going wrong?
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks in Advance
Which firmware are you using? Do you have a branded or unbranded phone? What happens if you try installing unlocked BTU firmware? This was a problem of mine when I had a branded phone and then I got the motherboard changed due to a display crack and then I couldn't install my branded firmware and only unlocked firmware like BTU. If I wanted to install my locked (DRE) firmware, it failed at the same point on odin like on yours (hidden write) . Idk if installing unbranded firmware helps, but atleast try it out