Database Users

Changing the identety of wizard.

I wanted to know if its posible to change the identety of the wizard. I do not mean the the name, I mean the identety that the cellphone network picks it up as.
Is it posible or it has to do with the IMEI number?

u have a stolen one?
dont see why on earth should you want to do that if not to put a stolen into working...

I dont meam how to chanege the imei # and the phone is my. the thing that i want to change is want tells the network what kind of cell it is. like when you go to opera browser and on the settings it asks if you want to be identifide as a pc or handheld but for this i want to change for network identety (to show as a different tipy of phone like a moto or nokia)
if it involves changing the imei then i wont do it but could there be some other way or is it even posible?

They can detect your device type??! What makes you think they can detect your device type?

hanmin said:
They can detect your device type??! What makes you think they can detect your device type?
Click to expand...
Click to collapse
In the US, tmobile some how knows what device you have. when i check my service info on the internet it tells me that i own a wizard (tmobile MDA in US) but i then switch the sim to a differerent phone and it then tells me that i have that phone. to download stuff from tmobile u have to have a regular phone because they dont have content for the wizard. so if i could change the id of the wizard or maybe emulate a defferent id i can then download stuff.

Very interesting indeed. AFAIK, the telco is able to get the IMEI of your phone. So, if they were to have a database of all the phone, then probably they can tell what phone you are using by refering to the database.
Or else, try using a cheap old phone to see if they can detect it, thats to make sure that not the high tech phone that is transmitting the 'signal' to the telco for identification.

I have tried it with 4 other phones:1)an old nokia the big ones 2) another nokia small one with mono color screen 3)a cingular motorola v180 not that old but tmobile has released it too 4 months ago 4)a motorola razr V3 from cingular.
the v180 i had tried it before tmobile had theirs and would still come out as owning it and could download with it as the same with the razr but i just resently purchased it.
All would be detected

hanmin said:
They can detect your device type??! What makes you think they can detect your device type?
Click to expand...
Click to collapse
I've read this a looong time ago. An article that stated, that in your IMEI is encoded your phone manufacturer and model. Maybe sth. else, but not sure.. Can anyone correct me if I'm wrong?
BTW: In many countries changing your IMEI is against the law.. so beware

If only their was a way to emulate this but if its the imei then their is no way to do this legaly but posible at own risk

Your definetly right about being able to detect the type of phone. About 5 or 6 years ago we did a bit of development at work based around getting information to remote users via thier mobile. We had a gateway provided by Nokia that we tested which detected the type of phone and it's browser capability and subsequently redirected to the best suited format (WAP, Internet etc). I know this doesn't answer your question but at least your on the right track

ultraprimeomega said:
I wanted to know if its posible to change the identety of the wizard. I do not mean the the name, I mean the identety that the cellphone network picks it up as.
Is it posible or it has to do with the IMEI number?
Click to expand...
Click to collapse
I think you mean changing the "user agent" string ?
That usualy shows what kind of computer + os + browser that you are using
If you use IE then you have to change settings it in the registry
\HKLM\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\
I think the "Default" key in there is the most important.
Here is a short list of "user agent" strings : http://webcab.de/wapua.htm
you can check your current "user agent" on sites like this : http://www.schroepl.net/cgi-bin/http_trace.pl
Although its a bit messy on the tiny screen of a pda.

some more info found on wiki xda developers :
Change the 'user agent' identification of PIE
To change the 'user agent' identification of Pocket Internet Explorer, several fields need to be adjusted. The example shows how to identify as Internet Explorer 6 - desktop version
The standard compliance 'user-agent' string:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\(Default) = "Mozilla/4.0" (REG_SZ string, no quotes)
Defaults to "Mozilla/2.0" The application/version string:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\Version = "MSIE 6.0" (REG_SZ string, no quotes)
Defaults to "MSIE 4.01" The host operating system string:
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\Platform = "Windows NT 5.0" (REG_SZ string, no quotes)
Defaults to "Windows CE" Please note that if you change the Platform string, PDA-friendly sites may stop sending you PDA-friendly content automatically. Leave this string set to "Windows CE" unless a site absolutely refuses to work, or you want the site to feed you its normal content.

Flexer said:
I've read this a looong time ago. An article that stated, that in your IMEI is encoded your phone manufacturer and model. Maybe sth. else, but not sure.. Can anyone correct me if I'm wrong?
BTW: In many countries changing your IMEI is against the law.. so beware
Click to expand...
Click to collapse
What T-Mobile USA is doing is most likely based on IMEI. I see 2 ways that they are doing this. 1) They have a database of IMEI's from all of their "branded phones" that they have sold and their corresponding device models. 2) The IMEI contains manufacturer and model info, just as the VIN on a car contains info on the year, make, model, engine, and country of origin. I am thinking more along the lines of option 1 because I have an unbranded QTEK 9100 on the T-Mobile USA network, and the website is unable to determine what phone I am using.
EDIT:
Actually I just logged into T-Mobile's site, and they are now correctly detecting my phone. So the IMEI most definately contains model info just as the VIN on a car. Here is what I am talking about for those of you that dont have T-Mobile USA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You can read a lot of info from IMEI number check yourself
http://www.numberingplans.com/?page=analysis&sub=imeinr

shamus said:
You can read a lot of info from IMEI number check yourself
http://www.numberingplans.com/?page=analysis&sub=imeinr
Click to expand...
Click to collapse
Well, that solved the mystery of how they are able to identify your phone. It got mine relatively accuratly (QTek 9100, while mine is a Vario) and enough to knwo whats your phone type.

Thanks for repliying to this and at first i was thinking that you needed to change the imei but i think ill try changing the user agent because this seems like what i was looking for more then how tmobile was knowing what cell i was using but good to know. hope it works
Thanks again.

JVTrip -> Export your trips to Google Earth

Hello all,
I just start a new project: JVTrip.
My idea is let you track yourself while you are in a trip, walking, cycling, driving or just watching your childs moves And then export the path to Google Earth.
You can add notes, costs or pictures to your path. These informations will be stored with the GPS location where you added them. When you export your track to Google Earth, all information will be there as markers.
Also the application will tell you the total cost of your trip, the distance you traveled, the current speed, altitude and position. There is an internal compass to help you to know where the true north is (not magnetic north).
Because WM6 bases software can't take pictures I just let you to select pictures you have in your device. Of course you can take pictures with the application started.
Another use of this project is for professional purpose. People who work with geo referenced material would use this application to register their works and discovers.
Thinking on that professional use I added to the project the feature to show the traveled distance, the current speed, altitude, position and a compass for people knows where the true north is. Choosing between Imperial or Metric measurement systems the user will be able to convert meters in feets, km in miles and more.
The project works with Windows Managed GPS or with External GPS devices. With WM GPS, the user will be able to use more than one GPS based software at the same time.
How it works:
First of all you must create a new trip typing the name of the trip, the start and end points. After that you just need to click in Start Trip.
There is an integration with Google Maps! When your GPS is fixed just click Where Am I and the application will show you an image from Google Maps with your current position. The same feature works to see where you added notes, costs or pictures.
What you need:
- .NET 3.5
- SQLServerCE
Where can I find the cab file?
There is no official site yet. But you can download it here.
You can install a GPS based Compass downloading here.
Keep JVTrip up to date!
There is an integration with AppToDate. This application verify if configured softwares are up to date or not. If not, you are alerted, and invited to download the new version! Very cool and useful.
You can download AppToDate here.
After install AppToDate, please download and run JVTrip to configure AppToDate.
Try this and don't forget a new version never more!
--> It is a work in progress. In future versions I will make a lot more.
Support this project
You can support this project making a donation clicking here or clicking the banners in the project website: http://jvtrip.sourceforge.net (not working yet).
Cheers,
Joubert Vasconcelos

Feature request: .gpx export.
Then your app can be used for Openstreetmaps.

Anolnx said:
Feature request: .gpx export.
Then your app can be used for Openstreetmaps.
Click to expand...
Click to collapse
Ok, good idea. But I'll be out in february (vacations! ). I'll do it after that
Joubert

Error message
Hi Joubert,
nice to see you again
Ok, I have tried it and I failed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am running Opencell and RT also on my mobile, so .net and sql are installed.
I have tried the installation on my device and also on my memorycard. Same issue.
Therefore I created in my registry a key hklm\jv software\jvtrip (debug = y) --- (I understand your software is working), so that I get a debug log
JVTrip.txt says:
Start: 22.01.09 21:15:17
JVTrip Version: 0.1.0-0
Instaled in: \Speicherkarte\JVTrip\
JVUtils version: 0.0.1-1
JVSQL version: 0.1.0-0
JVGPS version: 0.0.1-0
22.01.09 21:15:18 - DataBase, creating object
22.01.09 21:15:18 - OpenDataBase: object is valid? Yes
OpenDatabase
OpenSQL: sql=select * from config where 1=2
OpenSQL: sql=select * from config
22.01.09 21:15:22 - OpenDataBase: opened? Yes
OpenSQL: sql=select * from trip order by nmtrip
CloseDatabase
kuzco
btw: Enjoy your vacation.

kuzco1 said:
Hi Joubert,
nice to see you again
Ok, I have tried it and I failed.
I am running Opencell and RT also on my mobile, so .net and sql are installed.
I have tried the installation on my device and also on my memorycard. Same issue.
Therefore I created in my registry a key hklm\jv software\jvtrip (debug = y) --- (I understand your software is working), so that I get a debug log
JVTrip.txt says:
Start: 22.01.09 21:15:17
JVTrip Version: 0.1.0-0
Instaled in: \Speicherkarte\JVTrip\
JVUtils version: 0.0.1-1
JVSQL version: 0.1.0-0
JVGPS version: 0.0.1-0
22.01.09 21:15:18 - DataBase, creating object
22.01.09 21:15:18 - OpenDataBase: object is valid? Yes
OpenDatabase
OpenSQL: sql=select * from config where 1=2
OpenSQL: sql=select * from config
22.01.09 21:15:22 - OpenDataBase: opened? Yes
OpenSQL: sql=select * from trip order by nmtrip
CloseDatabase
kuzco
btw: Enjoy your vacation.
Click to expand...
Click to collapse
My bad!
Please download again. I made some improvements.
Regards,
Joubert

Working now ....
joubertvasc said:
My bad!
Please download again. I made some improvements.
Regards,
Joubert
Click to expand...
Click to collapse
It is working now.
I will create a trip next week.
Thanks
kuzco

kuzco1 said:
It is working now.
I will create a trip next week.
Thanks
kuzco
Click to expand...
Click to collapse
I hope you enjoy it.
This software is nothing special yet, but if the people like it I will add feature as possible.
Regards,
Joubert

I just uploaded a new version. Nothing special, just a new compass.
Regards,
Joubert

GPS fix
Joubert,
are you using a different way to get a GPS fix with JVTrip 0.1.0-1?
With RT (0.3.2-0) and OCC (0.3.0-0) I need approx. 20-30 sec. to get a fix, but with JVTrip I get most times no fix.
Regards
kuzco

kuzco1 said:
Joubert,
are you using a different way to get a GPS fix with JVTrip 0.1.0-1?
With RT (0.3.2-0) and OCC (0.3.0-0) I need approx. 20-30 sec. to get a fix, but with JVTrip I get most times no fix.
Regards
kuzco
Click to expand...
Click to collapse
No, I use the same library.

Hi,
I just released version 0.1.0-3 with bug fixes.
Regards,
Joubert

Hack a uim card for xv6800

一个偶然的机会， mr7 在某二手手机卖场发现一台由美国电信运营商 verizon 订制的 XV6800 烧号一体机。由于广州玩 CDMA 烧号机的人不多，商家也不会改，于是抱着碰运气的心态把这台未经改卡的原装机买了回家看能不能改为插卡机。
同为美国电信运营商的 Sprint 公司订制的 XV6800 机身为浅灰色，外观十分有型！而 verizon 订制的 XV6800 外观则显得有点土，机身塑料质感明显！但在按键操作及力度反馈上 mr7 认为 verizon 版本优于 Sprint 版本。机子拿回家后马上刷了中文 ROM ，并出现“白三角”的正常现象，为何说“白三角”是正常现象？很简单， mr7 还没更新PRL和做 QPST 的设置。
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
看看两者机身背面， verizon 版 XV6800 背部的金属屏蔽片已经被商家拆除，估计不会改插卡所以放弃了，而 Sprint 版的 XV6800 则已被改好插卡。很多网友经常问 XV6800 哪个版本好，其实不管 A 版、 S 版、 V 版、 Q 版的 XV6800 ，内部硬件是一样的，都是由 HTC 这个厂家代工的，都有 WIFI 模块。只是表面外壳和 LOGO 不同而已。手机原来的开机 LOGO 、 ROM 都是特意为不同电信运营商定制的，而且需要写码烧号。这些手机拿到中国大陆后，很多商家通过硬件改造，在电路板上加入 UIM 卡座，然后修改 QPST, 使到这款机子可以在国内使用。早期 XV6800 的 ROM 是屏蔽了 GPS 功能的，后来新出的 ROM 解除了屏蔽。
为了方便广州地区的玩家讨论改装操作，可加入广州 CDMA 玩家群了解，以便在广州市内共同研究交流， QQ 群号： 51711332 （请注明是广州地区玩家）。 mr7 的 QQ ： 510844822（请注明） 。
OK ，改插卡前先准备好梅花内六角螺丝批、充值卡或废旧 SIM 卡等塑料硬卡片用于拆机。假如 TF 卡槽内有 TF 记忆卡的话请先拔出。我们只须拆开手机底部外壳即可。
1 ．扭开 XV6800 背面的 4 颗小螺丝。如图方框处。

2
2 ．打开 XV6800 的滑盖，键盘按键朝上。把充值卡小心插入键盘与外壳之间的缝隙，如下图。 XV6800 键盘与外壳之间共有 6 个暗扣连接着，充值卡从顶部开始以顺时针方向慢慢划开键盘与外壳连接的暗扣。划开暗扣后可以轻轻翘起键盘直到外壳全部脱离向下翻开。
3 ．暗扣的位置分别在下面 3 个地方，大家可以参考下面 3 张图片以便拆机。
A. 右侧
B. 顶部
C. 左侧

当外壳卸载后，就是通信部分的主板了。主板上要整改的地方为红蓝两个区域。
A ．红色方框内必须用透明胶布贴好。主要原因是改区域为 XV6800 金属手写插入的地方，电路板上的触点都是外露的，金属笔插入后该处后很容易造成短路，短路后造成手机会不断重启的，因此必须贴上透明胶布以防短路。
B ．蓝色区域则为焊接 UIM 卡座的地方。焊接卡座需要电烙铁，松香等。注意！焊接前先将电烙铁预热，然后拔掉电烙铁的电源插头利用余热来做焊接工作，这样可以防止静电或感应电窜入电路导致元件烧坏。
5 ．准备好改装的材料，包括特制的 UIM 卡座和塑料底板。 XV6800 的 UIM 卡座跟普通的 SIM 或 UIM 卡座很不同， XV6800 卡座卡脚和触点是错位，而普通卡座是一一对应的，不能直接焊在 XV6800 电路板上使用。为了方便大家了解，作了大致示意图。
6 ．除了焊接 UIM 卡座，还要焊接电路板上两处触点，如下图。图中的 A 与 B 两点焊接在一起使RST端口能连接到电路，同样将 C 与 D 两点也焊接在一起使CLK端口能连接到电路。顺便把 UIM 卡座各触点定义也标出来。
7 ．这是焊接好 UIM 卡座后的特写， A 、 B 和 C 、 D 各触点也焊接好了。

8 ．下图是贴上塑料底板并合上外壳后的效果图。基本完成硬件改造。
做完硬件改造后，下一步是用电脑做 QPST 的设置。做 QPST 前请先拔出 UIM 卡和 TF 卡。
首先安装微软的 Activesync 4.5 ，并测试电脑与 XV6800 的连接是否正常。安装 QPST 2.7 BUILD 215 ， 215 是目前最好用的版本。安装驱动 Install_MSI_Sprint 。进入拨打电话界面，按 ##3434 然后拨号或按 ##3424# 进入 DM Router 模式，电脑认出硬件后手动找出驱动路径，当然也可以选用单独的 Modem 驱动。详细方法可参考其他网友的攻略。
进入 QPST 时会提示输入 SPC 码的，用算号器输入 ESN 码就得出 SPC 码。 QPST 设置的项目主要有：
1 ． 1x/HDR Secruity 栏的 R-UIM 项改为 R-UIM Only 即只读 UIM 卡数据。
2 ． M.IP 栏的 Mobile IP 项改为 Simple IP only 。
3 ． gpsOne 栏左边的选项前面全打钩，右边的 PDE IP 项地址为 0.0.0 .0 ， PDE Port 端口项为 0 ， PDE 项选 DBM ， Position 项选 PDE 。
4 ． MMC填460，MNC填03
大概设置就是如此！写入手机即可，然后重启一下手机。
顺便把 PRL 、 RADIO 等刷为最新版本，开机后可显示 EV-DO连接（37号频点） 。接上 CDMA UIM 卡，拨打电话正常！通话优良。
以上图片均可放大查看。本文内容仅供参考，只代表mr7个人实际测试及建议。鉴于本人水平所限，如有不正之处敬请多多指教。
GO AHEAD！ TRY IT…………………

So what exactly is the purpose of adding a sim card to the titan?

Well.. Viewing the pictures, looks great, but reading in chinese it's frustating, specially when I don't understand it... jejejejeje...
Anyway, seems to be a great way to use our Titans as GSM... Or that's what I think is this post to...
Any other language will be okey..
Thanx...

But I don't think the titan has functional GSM hardware/software. I don't think it has anything to do with missing a sim card. I translated the Chinese it kinda makes since in his steps.

Perhaps... I really don't know if this phone has those functionalities, but we can't denied the images... jejeje...
If there's another posts on the web about this, it really will come out soon..

RUIM uses cdma networks with all subscriber info on a sim card. Meaning in china, korea or india (where CDMA networks are used) you could theoretically pick up a prepaid sim and use your titan on a foreign network if you soldered a sim tray on it. (basic way of explaining it) There is another post in here in english if you care to search. Pretty cool stuff!
HERE is the thread from about a year ago or so.

Digital Roaming
Dear mr7mr7
the setting MMC 460，MNC 03 is it operator related ?
if the RUIM card i have is already prgramed which is i get from CDMA operator here in indonesia, do i still need to change the MMC and MNC setting ?
When i do the other setting (Change 1x/HDR to RUIM Only) and inserting my RUIM, my phone turn to digital roam.
is there any other setting needed ??
-- Tubbz --

google translate people:
A chance, mr7 second-hand mobile phone in a store by the United States found a verizon carriers ordered XV6800 No. burning machine. CDMA as a result of playing the Guangzhou No. burning of many people, businesses will not change, luck was with this mentality of Taiwan without the original card to buy a home machine and see if I can read card machine.
The same for the U.S. carrier Sprint Corporation XV6800 customized for the light gray body, appearance is very stylish! Verizon customized XV6800 and it appears that the appearance of a little soil, texture clear plastic body! However, operation and efforts in the feedback button on the verizon version mr7 that version is better than Sprint. Home immediately after the machine brushes the Chinese ROM, and a "white triangle" of a normal phenomenon, so why is "white triangle" is a normal phenomenon? Very simple, mr7 do not update the PRL and QPST settings.
Take a look at the back of the two fuselage, verizon version of the metal shield back XV6800 film business has been dismantled, it is estimated that there will not be given up to card, XV6800 and the Sprint version of the card has been improved. Many friends often ask which version XV6800 good, in fact, no matter A version, S versions, V Edition, Q version of the XV6800, the internal hardware is the same as all the manufacturers by HTC of Taiwan, have WIFI module. LOGO is a superficial shell and different. Mobile phone original boot LOGO, ROM are designed to customize the different carriers, but also burn No. need to write code. To get these phones in mainland China, many business transformation through the hardware, the circuit board to join in the UIM card connector, and then modify QPST, so this machine can be used. XV6800 early screening of the ROM is the GPS function, a new out later lifted the mask ROM.
Guangzhou in order to facilitate conversion of the players to discuss the operation, which may be included in Guangzhou CDMA base to understand players in order to study the exchange of the city of Guangzhou, QQ group number: 51711332 (Please specify player is in Guangzhou). mr7 the QQ: 510844822 (please specify).
OK, change card ready before Plum Hexagon screwdriver, recharge cards or SIM cards used hard plastic card used to拆机. TF card slot if there are TF memory card if you pull out. We need only to open the phone at the bottom of shell.
1. XV6800 turn on the back of the four small screws. Figure Box Office.
Attached Thumbnails
Click image for larger version Name: IMG_0013.JPG Views: 148 Size: 47.8 KB ID: 151171 Click image for larger version Name: IMG_0019.JPG Views: 146 Size: 36.0 KB ID: 151172 Click image for larger version Name: IMG_0021.JPG Views: 136 Size: 39.6 KB ID: 151173 Click image for larger version Name: IMG_0026.JPG Views: 137 Size: 46.3 KB ID: 151174 Click image for larger version Name: IMG_0034.JPG Views: 128 Size: 41.2 KB ID: 151175
Click image for larger version Name: IMG_0035.JPG Views: 129 Size: 34.7 KB ID: 151176 Click image for larger version Name: IMG_0036.JPG Views: 126 Size: 33.8 KB ID: 151177 Click image for larger version Name: IMG_0033.JPG Views: 130 Size: 35.6 KB ID: 151180
Reply With Quote Multi-Quote This Message Quick reply to this message
mr7mr7
View Public Profile
Send a private message to mr7mr7
Find all posts by mr7mr7
Add mr7mr7 to Your Contacts
Sponsored Links
# 2 Report Post
Old 28th January 2009, 05:27 AM
mr7mr7 mr7mr7 is offline
Junior Member
Join Date: Oct 2008
Posts: 4
Default 2
2. Slide open the XV6800, keyboard keys up. Insert the card carefully to recharge the keyboard and the gap between the shell, as Fig. XV6800 keyboard with a total of six between the shell buckle connected to the dark, recharge cards from the top clockwise slowly began to draw with the shell to connect the keyboard to open the secret button. Dark gash can hold gently tilt the keyboard down until the case all turned out.
3. Withholding the location of the dark in the following three areas, we can refer to the following three picture拆机.
A. right
B. at the top
C. left
Reply With Quote Multi-Quote This Message Quick reply to this message
mr7mr7
View Public Profile
Send a private message to mr7mr7
Find all posts by mr7mr7
Add mr7mr7 to Your Contacts
# 3 Report Post
Old 28th January 2009, 05:32 AM
mr7mr7 mr7mr7 is offline
Junior Member
Join Date: Oct 2008
Posts: 4
Default
When the shell after unloading, that is, the communication part of the motherboard. To reform the motherboard where the two regions for the red and blue.
A. Red box with a transparent adhesive tape must be affixed to good. The main reason is for the XV6800 to the region where the metal insert handwritten, circuit board contacts are exposed, metal pens on the premises after insertion is likely to result after the short circuit, short circuit caused by mobile phones will continue after the restart, it must be affixed transparent adhesive tape to prevent short circuit.
B. Blue region compared with the local welding UIM card connector. Electric iron deck welding needs, such as rosin. Attention! Before the first electric iron welding preheating, electric iron and then unplug the power plug to make use of heat welding, to prevent electrostatic or induction electric circuits lead to components窜入burned.
5. Ready modified materials, including specially designed holder and plastic floor UIM. UIM card connector with the XV6800 ordinary SIM or UIM card connector is very different, XV6800 card deck is the wrong foot and contacts, and general deck is one-to-one and can not directly solder circuit boards used in the XV6800. In order to facilitate understanding, were more or less schematic.
6. UIM card connector in addition to welding, but welding circuit two contacts on the board, as Fig. Figure A and B in two welded together to make RST port can connect to the circuit, the same C and D will be welded together to make two other points which can be connected to the CLK port circuit. Incidentally, the UIM card connector standard definition of the contacts out.
7. This is a good welding features after UIM card connector, A, B and C, D of the contact welding is also good.
Attached Thumbnails
Click image for larger version Name: IMG_0052.JPG Views: 124 Size: 41.3 KB ID: 151181 Click image for larger version Name: IMG_0056.JPG Views: 121 Size: 40.0 KB ID: 151182 Click image for larger version Name: IMG_0061.JPG Views: 123 Size: 32.0 KB ID: 151183 Click image for larger version Name: IMG_0070.JPG Views: 122 Size: 42.1 KB ID: 151184
Reply With Quote Multi-Quote This Message Quick reply to this message
mr7mr7
View Public Profile
Send a private message to mr7mr7
Find all posts by mr7mr7
Add mr7mr7 to Your Contacts
# 4 Report Post
Old 28th January 2009, 05:34 AM
mr7mr7 mr7mr7 is offline
Junior Member
Join Date: Oct 2008
Posts: 4
Default
8. The chart is pasted on the plastic shell plate after the combined effect of Fig. Complete transformation of the basic hardware.
After the hardware modified, the next step is to do with computer settings QPST. QPST do you pull out before the UIM card and TF card.
First of all installed Microsoft Activesync 4.5, and test computer and connection is the XV6800. Install QPST 2.7 BUILD 215, 215 is the best version. Install the driver Install_MSI_Sprint. Interface into the call, press # # 3434 then dial-up or press # # 3424 # to enter the DM Router mode, the computer recognized the drive hardware manual to find the path, of course, can choose to use a separate drive Modem. Detailed methodology for the other users can refer to the Raiders.
QPST will be prompted to enter the SPC code input and enter the ESN with算号器come SPC code on the code. QPST project settings are:
1. 1x/HDR Secruity column changed to R-UIM of R-UIM Only data that is read-only UIM card.
2. M. IP column replaced by the Mobile IP of Simple IP only.
3. gpsOne options in front of the left column打钩wide right of the PDE IP address 0.0.0 .0, PDE Port for the port of 0, PDE election of DBM, Position of selected PDE.
4. MMC fill 460, MNC fill 03
Set is probably the case! Can be written into the phone, and then click restart phone.
Incidentally, the PRL, RADIO brush and so on for the latest version of the boot can show EV-DO connection (37 frequency points). Access to the CDMA UIM card, make calls to normal! Good call.
The above picture can be enlarged view. This article is for information purposes only personally mr7 represent the actual testing and suggestions. Since I am limited by the level, if you is not correct at the exhibitions.
GO AHEAD! TRY IT ... ... ... ... ... ... ...

does anyone think there is any potential here at all to possibly use the sim card slot to extend the titan/mogul memory.
just trying to think outside the box

SIM cards can store, at most, a few hundred K, and that's ROM space, not RAM. Not even remotely worth thinking about as an expansion.
If you're not planning to use your Titan on an Asian CDMA network that requires a SIM card, this information is completely useless to you.

i beg to differ...this article is from 2006
http://www.pdasnews.com/articles/2118/1/msystems-Announces-Availability-of-High-Capacity-SIM-Cards
get a decent programmer who can remap this as a vfs (virtual file system) and have direct access to the kernel
i know next to nothing in programming...and yes maybe they aren't capable of worthwhile access speeds
or maybe they are...
dont just talk negative...think of the possibilities...the website is solely devoted to not depending on the providers
"if they didn't offer it...its not possible" is a horrible way to think and even be posting on this website
i did find a new program that looks pretty baller
i have a trial copy of it
its called solfs
http://www.eldos.com/solfs/

[APP] HTC Video IP Camera monitoring (software release)

HTC Video IP Camera monitoring (software released)
Have you ever wanted to watch your IP cam with your WM phone ? We had the same issues a few years back. We internally needed to see different cameras , behind firewalls , multiple locations, password protected, corporate VPN's, PTZ etc. So we built it into a product that did more than just cameras, but it was for internal use only and is Patented and Trademarked.
We have finally received the official ok to release the camera only version. The geeks in our group finally get to help this community out.
This release will always have a free IP camera input. One to see your favorite pet cam, your child’s daycare center, your favorite beach cam, your home/office security IP cam etc. Download it here.
www.securenetworksystems.com/video-impact
Please let us know if this helps you. Also which phones you had good success with or tested it with.
Thx

IP Camera Monitoring- Tested Phones
Starting a list of phones that have been tested with the app by xda-developers . So far feel free to post the ones you test here
PPC 6800
HTC Diamond Pro
PPC 6700
HTC Tilt

I have installed this video ip program to my htc hd and it will not execute. message say that the version of framework is not correct.
I am using rom 1.14.401.3. could someone post the file that I need?
Thankz all.

Sure
Jwilton,
Thanks to Punkster for this ...
You need the latest 3.5 Compact Framework installed on the device. You can download it from:
http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en
and it has instruction on the page on how to install it. Basically connect your device to ActiveSync, and then run the .msi that you download.
Punkster

Video IP Camera
Perhaps a better description... Located at PPC Geeks
http://forum.ppcgeeks.com/showthread.php?t=68107
by santod
Video IP Camera monitoring (APP)
--------------------------------------------------------------------------------
HTC Video IP Camera monitoring (software released)
Have you ever wanted to watch your IP cam with your WM phone ?
Works with Windows Mobile Pocket PC devices with Compact Framework 3.5
Connect to virtually any IP camera that supports JPEG/MJPEG
Direct support (including PTZ*) for Axis and Panasonic IP Cameras
Control PTZ with the touch of a finger*
Utilize any network connection (3G, CDMA, 802.11, ActiveSync, etc.),
System Requirements:
Pocket PC with Windows Mobile 5.x, 6.x Pro or later
Compact Framework 3.5
Network/Internet Connection
It is recommended that you have an unlimited data plan through your phone provider
*PTZ support is only on fully supported cameras and cameras that actually have PTZ capabilities. Download Video-IMPACT Now
Video-IMPACT allows you to connect to your IP cameras without the need of additional hardware and no monthly/annual subscriptions. Connect directly to your IP cameras, no need to connect cameras to a computer or server; only the client that is installed on the Mobile device. With support for JPEG and MJPEG streams, you can to connect to virtually any IP based camera.
Axis and Panasonic IP cameras and servers are directly supported and if they have Pan/Tilt/Zoom (PTZ), you can control your camera with the touch of a finger. If you have an unsupported device, you can still view your IP video by simply giving the full URL to the image location.
Being network agnostic allows the application to connect to your camera virtually anywhere.
Do you need to see different cameras , behind firewalls , multiple locations, password protected, corporate VPN's, PTZ etc? This app. is for you.
This release will always have a free IP camera input. One to see your favorite pet cam, your child’s daycare center, your favorite beach cam, your home/office security IP cam etc. Download it here
__________________

thats useful,

If you are looking for cameras to test on, you can visit:
http://www.opentopia.com/hiddencam.php
The easiest way to find out the address is right clicking on the video that you want and select properties. If it is a supported camera (Axis or Panasonic) you only need to enter the IP address or DNS name, otherwise enter the full URL to the image location.
If you are having problems adding a camera, be sure to read the README in the zip or the installation directory.

doesn't work
I've put the full url : http:\\mydomain.dnsalias.org?snapshot.jpg
with on the second screen the user and pwd , nothing
On the screen : "loading" and nothing:

rollins2 said:
I've put the full url : http:\\mydomain.dnsalias.org?snapshot.jpg
with on the second screen the user and pwd , nothing
On the screen : "loading" and nothing:
Click to expand...
Click to collapse
tried the same, but different URL and no luck

rollins2 said:
I've put the full url : http:\\mydomain.dnsalias.org?snapshot.jpg
with on the second screen the user and pwd , nothing
On the screen : "loading" and nothing:
Click to expand...
Click to collapse
masalma said:
tried the same, but different URL and no luck
Click to expand...
Click to collapse
I believe this issue has been fixed. There was an issue with JPEGs that were around 640x480 or larger which caused an issue with the buffer, but this has since been fixed with JPEG streams. I tried to PM you to let you know and see if it worked before I posted it here, but from my testing on the JPEG streams the only ones I couldn't get were larger images, and that was a buffer issue. So if you could re-download it and re-install it hopefully it will work for you now.
Hope everyone else is enjoying the program.

Hi,
I have a problem. I get always this error report:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but I have installes it yet:
Please help me! I have a samsung i900 omnia

I tried this url;
http://cam2.east-ayrshire.gov.uk/axis-cgi/mjpg/video.cgi?resolution=CIF
And just get a white screen...

mupko said:
Hi,
I have a problem. I get always this error report:
but I have installes it yet:
Please help me! I have a samsung i900 omnia
Click to expand...
Click to collapse
This message is not saying that you don't have the CF 3.5 installed (otherwise the application won't run), instead it is saying that this error message that occurred is not in the CF so can't be displayed. I sent you a PM so that we can try and figure out what is happening.
mikeharris said:
I tried this url;
http://cam2.east-ayrshire.gov.uk/axis-cgi/mjpg/video.cgi?resolution=CIF
And just get a white screen...
Click to expand...
Click to collapse
I just tried this camera and it works for me. If you are doing a camera type that is a supported camera, do not enter in the full path to the image file. Here is my settings on the configuration screen:
Address/URL: http://cam2.east-ayrshire.gov.uk/
Camera Manufacturer: Axis
Camera #: 1
Stream Type: MJPEG
Please let me know if this works for you, if not, it may have been something that we fixed during one of our enhancements that has not been released yet.

Very good app. Will test it and report later here.

thanks ,i will download and have a tre

[PRJ]Activate HW Compass for Touch and Devices with AK8976A chip [BOUNTY 200$]

HARDWARE COMPASS IN ALL HTC DEVICES WITH THE AK8976A CHIP?!?!
As said by some (tuxhero for example => here) ,the Touch HD has a real hardware compass inside waiting to be activated by some clever dev.
If you are such a dev here is some bounty for you as a little encuragement.
Goal:
Build a little proof of concept application (for winmo) and open the sources for all xda devs.
As for the bounty:
050$ Draque:the_Plaque
050$ maati + additionl 100$ if it works in google maps. (But only if released before the HTC Leo
050$ tids2k
050$ LC40
--------------------
200$

reserved for more

It's nice but i am not sure. Please don't go on my words. Some one said that me and i said it to you. No real Proofs.

i thought the new Samsung OmniaII/pro was the only WM devices that has hardware for a digital compass
in the dailer press *#0*#
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what other devices has this

it might be worthwhile to extract the compass application from the omnia2 rom dump for testing purposes

Is this screen from the omnia2 or pro?
And is this a test app from microsoft?

It doesn't work on my HTC Touch HD.

Hi, there is a test app that comes with the HTC Debug Tools set for this compass, some time ago I analyzed it and determined that it was likely present in the hardware, but I have never gotten it to function on my Raphael.
Lacking an HD device to test with, I can't say if it works there, but I can provide the app I will attach it shortly.

About the AK7986A sensor.
In the test application under help:
AKEMD 2007 (name and year is viewed)
Link to the webpage:
http://www.akemd-eu.com/smart_sensor_system/e_compass/index.html

Da_G said:
Hi, there is a test app that comes with the HTC Debug Tools set for this compass, some time ago I analyzed it and determined that it was likely present in the hardware, but I have never gotten it to function on my Raphael.
Lacking an HD device to test with, I can't say if it works there, but I can provide the app I will attach it shortly.
Click to expand...
Click to collapse
The app is not signed.

Da_G, i just tried on my HD the soft you shared to us;
-open and close seem to be ok but nothing happens
if you choose to re-open without closing before it will give this logical error:board already connected.
edit:
-init, start and stop give this logical error without open : board not found
-init, start and stop give this logical error with open : board already connected
So the soft is probably ok but for our HD we need to use the good input/output in the dll

info5i2002 said:
The app is not signed.
Click to expand...
Click to collapse
You have to copy the DDLs to Windows folder. However, "init" or "start" from the menu only brings up an error message "The board is not connected". Some graphical glitches as well ... seems to be made for QVGA.

So with a small possibility that Layar (3.0 ?) will come to Windows Mobile based phones, we really need a working compass for that to work.
Anyone still working on this? Would be a great addition for all our HTC devices!
Ps. For those who don't know Layar yet; it's an Augmented Reality app for Android and soon iPhone 3.0. Go visit http://layar.eu/ and think of trading WM for Android .

Vesperial said:
Da_G, i just tried on my HD the soft you shared to us;
-open and close seem to be ok but nothing happens
if you choose to re-open without closing before it will give this logical error:board already connected.
edit:
-init, start and stop give this logical error without open : board not found
-init, start and stop give this logical error with open : board already connected
So the soft is probably ok but for our HD we need to use the good input/output in the dll
Click to expand...
Click to collapse
Same happens on a Rhodium, would be very nice to have it working.

It needs a device called ECS1:, this driver is not present on Touch HD.

Maybe first we should check if any of new WM devices actually have AKM chip inside?

Does Windows Mobile provide any kind of a compass API? How difficult would it be to write a program like Layar or Wikitude or build compass support into Google Maps?
I'm thinking about buying an Omnia II or waiting for the HTC Leo, both should probably have the compass hardware, but how about any apps that use the compass? How long do you think it will take until we see an augmented reality apps for Windows Mobile?

Does anyone know which compass is used in the htc polaris?
Ar are the cab files for the polaris hw compass available by chance?
btw: if anyone wants to raise the bounty for this project just pm me or write it directly into the thread.

I did some more research into this, I am working with a driver for this for raph right now..
Let's see what I can come up with

Da_G said:
I did some more research into this, I am working with a driver for this for raph right now..
Let's see what I can come up with
Click to expand...
Click to collapse
Awesome! Thanks Da_G. Keep us posted.