Hello,
I have the JasJam with WM6 and radio 1.48
I have a problem with the camera. Sometimes it works great and other times when I start it, it shows green and pinkish flickering .. can't see a thing!
It seems like a displaced cable or something.. why? because when I hit the device with my hand, it goes back to normal!
If anybody has hardware experience with this thing, can you please guide me through fixing it?
Another thing is the reception... reception is always good and I can't complain.. but sometimes when I'm in the middle of a call, the line cuts! (this is happening with almost 80%) of the calls.
What's worse is that when it happens, I can't get to hang up! the red button won't work... "End Call" won't work... the counter just keeps counting seconds until about a minute when it resets the reception (it loses the network, looks for it, and becomes fine again when it finds it)...
I bought this device for a lot of cash, but it caused me a lot of trouble... it's a Saint when it works... but real Satan when it doesn't...
I would appreciate any help you guys can provide.
Thank you.
Hey i have the same problem as you on my "Dopod 838 Pro"
My camera flickers at the worst momments when i want to take a picture of something. i need help with it.
and another problem about my phone is all the buttons next to the screen (green button,end button, ok, button 5, message, internet explorer.. ).
and when im really mad i hit the pda and then the buttons start working for about 10 seconds..
i really need help with these two problems please help.. anyone..
I have a problem with my Xperia X1i. With the latest ROMs i have build (23549 and 23559) after some time during the day it stops displaying a message that someone is calling me. When someone calls the screen lights, the LEDs blink but there is no sound and no message on screen. After soft reset everything works OK for sometime and the same happens again later. Has anyone experienced a similar problem? Could it be related to ThrottleLauncher that i use for Today Screen an not Windows?
mmm i never use throttle launcher but it could be.... why you dont try to build another rom without throttle just chome... then use it for a while and check if it makes you the same issue...
I've in my htc hd2 the Dutty FAM v6 HD2 rom, and I was trying an Android build (mjdejay Clean 2.2)...
It seems everything runs ok, but I've done a Phone Call, screen automatically got black (Off, like in WM 6.5), but when i finished the call, i cannot get screen on again... I've pressed all the buttons, but nothing appears to happen...
If i plug usb wire into HD2 it comes back, and if i do an incoming call, i can take it...
Nobody has got samething? Thnx!
UPDATE: I think that my HTC HD2 has its proximity sensor broken...
A number of members have the same issue. I do. But not always. No fix for the moment.
move the fone away from ur ear
also , get a better rom (even tho i have a mdj build myself)
souljaboy said:
move the fone away from ur ear
also , get a better rom (even tho i have a mdj build myself)
Click to expand...
Click to collapse
Gee at least you didn't say buy an android phone. To say take it away from your ear is redundant. And to try a better build is just as bad. Why did you even waste your time replying?
dabezt said:
I've in my htc hd2 the Dutty FAM v6 HD2 rom, and I was trying an Android build (mjdejay Clean 2.2)...
It seems everything runs ok, but I've done a Phone Call, screen automatically got black (Off, like in WM 6.5), but when i finished the call, i cannot get screen on again... I've pressed all the buttons, but nothing appears to happen...
If i plug usb wire into HD2 it comes back, and if i do an incoming call, i can take it...
Nobody has got samething? Thnx!
UPDATE: I think that my HTC HD2 has its proximity sensor broken...
Click to expand...
Click to collapse
this happened on my phone occasionally (though i haven't experienced it yet with mdj s4 kenel), anyways...
if the screen stayed black after moving the phone away from my ear, id cover the light sensor briefly with a thumb (or whatever!) BEFORE pressing the end call button, this always restored the screen. may work for you?
Hi. I have same problem. Now I have MDJ Froyo Sense 2.4. It is very frustrating all roms what i tested has this problem... Is any solution? I tried to disable automatic display brightnes but without success...
Just to make you feel you are in company I have this issue too. It is the single biggest pain in the ass about android and it isdriving me maaaad.
Still better than rocking WM though.
Same problem here, about 90% of the time. It's most annoying when you're on some automated service that asks you to press a number and you can't get your screen on to bring up the dialpad!
Rest assured though, pressing the end call button does indeed end the call. Just leave the phone alone for a minute or so afterwards and it appears to back to "normal".
Finally i have found a workaround
Hello, after many tests i have found good workaround. It is very simple. Download from Market: "Speaker Shake" (there is avaible a free version) and install it. Then set it like on my screenshot. (important setting is "Speaker Always ON"). Now when you start a call, this app automaticly turn on speaker - this event wake up your phone and then is end of your "black screen". After this you can again switch off speaker in time of call...
Sorry for my bad english. I hope that it will help to you..
I use MDJ FroYo Sense Clean v. 2.4 [kernel: MDJ S6.1]
Thanks. I will give Speaker Shake a try.
Just a little happier right now as others have this issue and that it is just not an issue with my phone.
I am sure it is just an incompatible driver somewhere. Never noticed it in prior builds but with new builds it happens. But not always. But I did notice if I am able to select speaker then turn speaker off the issue doesn't happen. But then the screen does not go black when I put it to my ear.
To me this is a much bigger issue than data freezes. Makes using my phone as a phone almost unbearable.
Hoping someone who knows how will look into this issue soon.
Tried Speaker Shake.
Calls are automatically with speaker on and screen stays awake. However after turning speaker off the screen goes black and won't turn on again.
Nice fix if using speaker ALWAYS but still doesn't help for normal calls.
I tried it many times and this issue "after turning speaker off the screen goes black and won't turn on again" i had only once.
I have changed this app and now it turns speaker back to normal. You can try it. For my is it now best solution how to avoid black screen....
And i forgot to say that you need to have switched off automatic brightness of display..
Has anyone tried covering the light sensors for a few secs?
Not the best solution but it always works for me, can live with that till it gets sorted.
kam333 said:
Has anyone tried covering the light sensors for a few secs?
Not the best solution but it always works for me, can live with that till it gets sorted.
Click to expand...
Click to collapse
It doesn't work for me...
Hello. I have a problem with unlocking the phone. When I lock the phone and try it again to unlock the screen lights up only in black. Sometimes it takes a second, sometimes longer. You have the same problem? Any fix?
Thanks petapen. I will try your modified application.
Still wondering what the issue is here. Newer kernal issue? I believe I am still running hastarin 8.3.
Edit: And for other poster.......covering light sensor or exposing it to bright light does nothing once it turns black.
If anyone have any another solution. Please let me know....
black screen
petapen said:
If anyone have any another solution. Please let me know....
Click to expand...
Click to collapse
Screebl.....
If you haven't disabled auto brightness, do that. Secondly, some roms require a person to press the "call" key to wake the phone up.
Lastly, try a different rom, just remember to shut off auto brightness. I wish they came with that defaulted to off anyway.
Bumping this thread to keep it alive. Had a 50% chance of keeping the screen on, in froyostone v3.1. But it always came back after hitting end call key.
With MDJ FroYo HD v.4.3 the screen goes black everytime. Even after call the screen does not come back on. Only work around is to have someone call my phone and reject the call with the call end key. Then the screen turns back on.
Hi everyone,
I've got a used LG G2 with a broken display that I just replaced. Everything works with CyanogenMod 11 20140708-snapshot-m8-d802 (4.4.4), except for the dialer which acts up weird.
When I place or receive a call, the display turns black, and it doesn't come on again when I remove it from the face - seems like the light detector isn't working. I can turn on the diplay by using the power button though. Here another problem araises; I can't use any of the button on the dialer screen. I can't hang up, I can't enable the speakphone or show the numberpad. I haven't done any modding expect for installing a new rom and wiping the previous users' data.
Any ideas?
decon89 said:
Hi everyone,
I've got a used LG G2 with a broken display that I just replaced. Everything works with CyanogenMod 11 20140708-snapshot-m8-d802 (4.4.4), except for the dialer which acts up weird.
When I place or receive a call, the display turns black, and it doesn't come on again when I remove it from the face - seems like the light detector isn't working. I can turn on the diplay by using the power button though. Here another problem araises; I can't use any of the button on the dialer screen. I can't hang up, I can't enable the speakphone or show the numberpad. I haven't done any modding expect for installing a new rom and wiping the previous users' data.
Any ideas?
Click to expand...
Click to collapse
Sorry. I have the exact same problem. Began on PA 4.4.4+ and now back to stock and still does not work. Have you figured it out? Seems like a problem with the proximity sensor and no way to turn it off. Frustrating.
Sorry to hear that I ended up fixing it by hard resetting my phone with the software provieded by LG. I haven't installed a new custom rom since - instead I use the LG rom and customize it with the Xposed framework and the G2 Settings module. It works great, except for some random update notifications from the LG app store from time to time.
Not really a the solution that I has looking for, but now I can use the phone as it was intended. Please keep me updated if you come about some other workaround.
Hi.
I have an SM-910F, android version 5.0.1 with a bugging problem. During calls when i get a second call or some other notification the screen turns on and i end up pressing different buttons and commands with my cheek. proximity sensor functions ok as it turns on and off correctly when i dont have call waiting or when no other notifications get in the way. i believe the problem comes from the stock phone app which cant be replaced. i tried in call settings to disable "Notify during calls" and/or the "Call-related pop-ups", all in vain. It is very annoying as i ended some calls and noticed i opened almost 10 new windows (bluetooth, mobile data aso screens).
is anyone else having this issue? is there a solution to this?
my only hope is that this will be fixed with the new android update (5.1.1) which seems to be taking forever.
Anyone?
Sent from my SM-N910F using Tapatalk
I face the same issue too especially when I'm getting a pop up call notification. I just put the phone back and forth on my ear an it works sometimes. Guess it's a Samsung bug.
and still no word on the android update. i need a fix for this issue. its annoying
well, the update arrived but with no damn fix