[Q] Help! Bootloop - Galaxy Note 3 Q&A, Help & Troubleshooting

Ok so a couple of days ago I flashed a custom ROM using cwm recovery and I want to go back to stock so I wiped the data, cache and dalvik cache via cwm and tried to restore a backup i had made when i had the stock ROM installed but now I am just stuck in a bootloop. What can i do? :crying:

get a beer :highfive:

Related

[Q] Soft bricked the phone!

Hi guys,
I was running on CM10 11.18. However, wanted to switch back to CM7.2. Phone is now unable to boot up.
This is what I did.
1. Wiped Cache and data in stock recovery.
2. Wiped Cache, dalvik, data in custom recovery.
3. Installed CM7.2 and gapps
When I tried booting it up, the phone was on bootloops.
Then I picked my SEA sbf and flashed it using RDS Lite. However, problem persists. . Can anybody guide me through. I am without a phone now. Help!
You'll have to convert data to ext3.
Install cm10, in boot menu select tools then filesystem tools then convert to ext3
Sent from my MB526 using xda premium
rashsalmn said:
Hi guys,
I was running on CM10 11.18. However, wanted to switch back to CM7.2. Phone is now unable to boot up.
This is what I did.
1. Wiped Cache and data in stock recovery.
2. Wiped Cache, dalvik, data in custom recovery.
3. Installed CM7.2 and gapps
When I tried booting it up, the phone was on bootloops.
Then I picked my SEA sbf and flashed it using RDS Lite. However, problem persists. . Can anybody guide me through. I am without a phone now. Help!
Click to expand...
Click to collapse
Have you tried to wipe data in stock recovery again? (volume down + power on)
If bootloops persist try to flash your sbf again, after flashing go to stock recovery immediately and wipe data again.

Not able to flash other ROMs

Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
123hiten said:
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
Click to expand...
Click to collapse
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Bhagwanie said:
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Click to expand...
Click to collapse
Hi.
"plm" = problem
What firmware does your phone say it has got?
malybru said:
Hi.
"plm" = problem
What firmware does your phone say it has got?
Click to expand...
Click to collapse
I don't know where to see that, but I'm sure it's XXUBMF8.
That's the stock firmware I flashed.
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
try this method...WIPE FACTORY RESET...WIPE CACHE PARTITION ...advanced > WIPE DAVILIK CACHE and BATTERY STATS...and then go to MOUNT AND STORAGE and FORMAT SYSTEM...and thn try to install the rom hope it will work

Samsung Note 3 stacked after custom recovery

Hi i installed custom rom to my samsung note 3 with cwm recovery it was working good.After a time later i need to format it.I opened cmw recovery and
-formatted system
-formatted cache
-formatted data
after that i installed custom rom it installed succesfully.I restarted the phone,sound and note 3 writed and it stacked at the "Samsung"writings.I waited a lot but it doesnt opened.How can i solve this problem.
I tried wipe
dalvik wipe cache
wipe cache
but not solved my problem.
I can still reach the cmw recovery 6.0.4.7.
Thanks.
try to flash this file and let me know if it works
btw wrong section to talk about problems
baba17 said:
Hi i installed custom rom to my samsung note 3 with cwm recovery it was working good.After a time later i need to format it.I opened cmw recovery and
-formatted system
-formatted cache
-formatted data
after that i installed custom rom it installed succesfully.I restarted the phone,sound and note 3 writed and it stacked at the "Samsung"writings.I waited a lot but it doesnt opened.How can i solve this problem.
I tried wipe
dalvik wipe cache
wipe cache
but not solved my problem.
I can still reach the cmw recovery 6.0.4.7.
Thanks.
Click to expand...
Click to collapse
Probably tried to flash a KK rom if you where running JB before.
Or the other way around, trying to flash a JB rom on a KK device.
Sent from my SM-N9005 using Tapatalk

Stuck on starting apps?

Hi Guys, After I rooted and installed the recovery (using autorec) I flashed CloudyG3 1.3, it got stuck on Android is upgrading: Starting apps. I reflashed it 3 more times and the same thing happened , so I flashed the backup that I made after installing the recovery, and that was stuck on starting apps too. Then I used the back to stock thread and flashed back to stock (which worked) I then re-rooted and Installed the recovery again then flashed cloudy again and the same thing happened.
So what do I do?
(I have the D802T)
Thanks!
Did you wiped /system, wipe data factoryreset, /dalvik-cache and flashed it?
wulsic said:
Did you wiped /system, wipe data factoryreset, /dalvik-cache and flashed it?
Click to expand...
Click to collapse
Yeah, I wiped the dalvik, and cache, I also wiped everything a couple of times and tried to sideload it, which resulted in the same error.
Its just weird that android is upgrading,upgrading from what? I gtg to school so i will do some research when im back xd
I wish you also luck to fix your problem.
According to this AutoRec dosn't work on the D802t.

twrp wont wipe cache on my ze552kl

I tried installing RR ROM last night it took me a good 8 tries because twrp couldn't wipe the cache and put me into boot loop. And then my nandroid backup failed to restore from SD so the only option I had was to format data from twrp which wiped my downloads for all the ROMs. I had to sideload RR and Gapps to finally resurrect my phone. My back up is lost now.
Is there any fix for these issues? Also I tried installing through otg but that didn't work either I couldn't select the option.
I appreciate all your help
Thanks!

Categories

Resources