Hi Guys, After I rooted and installed the recovery (using autorec) I flashed CloudyG3 1.3, it got stuck on Android is upgrading: Starting apps. I reflashed it 3 more times and the same thing happened , so I flashed the backup that I made after installing the recovery, and that was stuck on starting apps too. Then I used the back to stock thread and flashed back to stock (which worked) I then re-rooted and Installed the recovery again then flashed cloudy again and the same thing happened.
So what do I do?
(I have the D802T)
Thanks!
Did you wiped /system, wipe data factoryreset, /dalvik-cache and flashed it?
wulsic said:
Did you wiped /system, wipe data factoryreset, /dalvik-cache and flashed it?
Click to expand...
Click to collapse
Yeah, I wiped the dalvik, and cache, I also wiped everything a couple of times and tried to sideload it, which resulted in the same error.
Its just weird that android is upgrading,upgrading from what? I gtg to school so i will do some research when im back xd
I wish you also luck to fix your problem.
According to this AutoRec dosn't work on the D802t.
Related
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
123hiten said:
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
Click to expand...
Click to collapse
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Bhagwanie said:
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Click to expand...
Click to collapse
Hi.
"plm" = problem
What firmware does your phone say it has got?
malybru said:
Hi.
"plm" = problem
What firmware does your phone say it has got?
Click to expand...
Click to collapse
I don't know where to see that, but I'm sure it's XXUBMF8.
That's the stock firmware I flashed.
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
try this method...WIPE FACTORY RESET...WIPE CACHE PARTITION ...advanced > WIPE DAVILIK CACHE and BATTERY STATS...and then go to MOUNT AND STORAGE and FORMAT SYSTEM...and thn try to install the rom hope it will work
Ok so a couple of days ago I flashed a custom ROM using cwm recovery and I want to go back to stock so I wiped the data, cache and dalvik cache via cwm and tried to restore a backup i had made when i had the stock ROM installed but now I am just stuck in a bootloop. What can i do? :crying:
get a beer :highfive:
The problem started yesterday. Did an OTA update from CM11 to CM12 but it caused so many problems so I booted to TWRP, wiped everything clean, transferred CM12 to my via Fastboot and did a clean install. Rebooted and it just lingers on the boot logo for ages. I tried the wipe and install again, same problem. I wiped my dalvik & cache, same problem....
So I thought maybe that version of CM was just buggy so I wiped again, transferred Resurrection Remix via Fastboot and installed that. It was at the boot logo for an hour before I gave up and turned it off.
I've never had a problem like this which has spanned between different roms, what could be the problem? I'm installing stock now, hopefully that works so I can try again
L3534N said:
The problem started yesterday. Did an OTA update from CM11 to CM12 but it caused so many problems so I booted to TWRP, wiped everything clean, transferred CM12 to my via Fastboot and did a clean install. Rebooted and it just lingers on the boot logo for ages. I tried the wipe and install again, same problem. I wiped my dalvik & cache, same problem....
So I thought maybe that version of CM was just buggy so I wiped again, transferred Resurrection Remix via Fastboot and installed that. It was at the boot logo for an hour before I gave up and turned it off.
I've never had a problem like this which has spanned between different roms, what could be the problem? I'm installing stock now, hopefully that works so I can try again
Click to expand...
Click to collapse
If you note a problem like this after installing a rom, i think you can try format data, not a simple wipe but a format in twrp
Hi,
I have G935F, installed TWRP 3.0.0.0 and rooted, WITHOUT wiping. System boots correctly, but I cannot do factory reset or wipe with TWRP, because I got some messages like "Cannot mount Data" and "Failed crypto loader". I understand that it has to do with encryption. Can someone please enlight me, and give me tips about the issue?
Thank you
Polemos82 said:
Hi,
I have G935F, installed TWRP 3.0.0.0 and rooted, WITHOUT wiping. System boots correctly, but I cannot do factory reset or wipe with TWRP, because I got some messages like "Cannot mount Data" and "Failed crypto loader". I understand that it has to do with encryption. Can someone please enlight me, and give me tips about the issue?
Thank you
Click to expand...
Click to collapse
You have to download dm-verity and force encryption disabler from here , put it to SD card, reboot into TWRP, FORMAT DATA (not wipe) and flash that file (dm-verity and force encryption disabler). All your data will be erased.
No way to unencrypt without loosing you data for the moment(
"All your data will be erased" means that after boot I'll find a clean system installation (as factory reset)?
I hope not to be posing stupid questions, I'm completely new to this world
Thank you very much
Yes just as a factory reset
Sent from my SM-G935W8 using Tapatalk
Ok, thank you all!!! ???
s it very important to wipe data?
Can I first flash the twrp ,second back up the rom by TWRP recovery
and then after factory reset ,I restore thw rom by twrp??
IS IT possible?
AGU PENG said:
Can I first flash the twrp ,second back up the rom by TWRP recovery
and then after factory reset ,I restore thw rom by twrp??
IS IT possible?
Click to expand...
Click to collapse
No, you cannot perform a backup, because your data is encrypted by default and the only way to disable it is to format your data.
I have a unique problem. I have a HTC Desire 612 from Verizon and I decided to revive it to playe PoGo. But it was stuck in a boot loop and I couldn't get any custom ROM.
Finally a gentle soul here gave me the stock rom and I flashed it vide TWRP and played PoGo for weeks. Then yesterday the phone bro led and when it came up it was stuck in a boot loop.
So I decided to flash the stock ROM again. But before that I tried to factory reset. I could go to TWRP, select wipe data, enter yes and the wiping was successful, then clear dalvic and cache and system beforehand finally I flashed the stock ROM.
Surprise surprise is NOTHING happens. The phone boots without the apps telling me they are installing. Then I get back the exact same data in my phone including my selected wallpaper and apps. Before I can do anything the phone restarts.
Point is wiping and restoring the stock ROM does NOTHING to the phone yet the processes are successful. Can somebody help?
vooks said:
I have a unique problem. I have a HTC Desire 612 from Verizon and I decided to revive it to playe PoGo. But it was stuck in a boot loop and I couldn't get any custom ROM.
Finally a gentle soul here gave me the stock rom and I flashed it vide TWRP and played PoGo for weeks. Then yesterday the phone bro led and when it came up it was stuck in a boot loop.
So I decided to flash the stock ROM again. But before that I tried to factory reset. I could go to TWRP, select wipe data, enter yes and the wiping was successful, then clear dalvic and cache and system beforehand finally I flashed the stock ROM.
Surprise surprise is NOTHING happens. The phone boots without the apps telling me they are installing. Then I get back the exact same data in my phone including my selected wallpaper and apps. Before I can do anything the phone restarts.
Point is wiping and restoring the stock ROM does NOTHING to the phone yet the processes are successful. Can somebody help?
Click to expand...
Click to collapse
HTC?? Wrong thread.
B3311 said:
HTC?? Wrong thread.
Click to expand...
Click to collapse
It really is about TWRP failing to wipe
Hello! I just updated to the latest OTA of OOS 5.0 and now the phone is just stuck on the screen where the white dots spin around I tried clearing cache, wiped "System settings" via Oxygen Recovery and no luck. I sideloaded the zip to my device and flashed it over the one I had on it previously. I followed this guide https://forum.xda-developers.com/oneplus-5/how-to/guide-restore-data-stuck-bootloop-n-o-t3724515 without any results! This is ridiculous. I just wanted to update to Oreo. Here are my phone details: https://imgur.com/a/n4rtR I am unsure what to try next. Should I wipe /system and flash the previous ROM zip file and try that? I can see my files but they are completely encrypted thanks to OOS, but only can I see them in Oxygen Recovery; TWRP shows nothing. Suggestions would be appreciated, thank you.
Had the same problem, had to format Data partition to get it working. Lost all data though
I was on OOS 4.5.15 with Magisk root and TWRP. Last night, uninstalled Magisk and I flashed stock recovery to update my phone. Even though I cleared cache and Dalvik, boot loop happened.
Only after a full reset, the phone boot normally. Since I had all important files backed up, I did not loose anything but it still bothers me. There should have been a more streamlined update process.
I completely bricked my device with the update, so i used this tutorial : https://www.androidexplained.com/oneplus-5-unbrick-return-stock/
I lost all my data but now it work like a charm and i was able to update properly to Oreo
hknisl said:
I was on OOS 4.5.15 with Magisk root and TWRP. Last night, uninstalled Magisk and I flashed stock recovery to updated my phone. Even though I cleared cache and Dalvik boot loop happened.
Only after a full reset, the phone boot normally. Since I had all important files backed up, I did not loose anything but it still bothers me. There should have been a more streamlined update process.
Click to expand...
Click to collapse
You have to do a full wipe (system, data, internal storage, and both cache) when going from Nougat to Oreo. That is the only way.
azeem40 said:
You have to do a full wipe (system, data, internal storage, and both cache) when going from Nougat to Oreo. That is the only way.
Click to expand...
Click to collapse
If so, how could they offer an OTA for customers? Don't get me wrong, I am just wondering.
hknisl said:
If so, how could they offer an OTA for customers? Don't get me wrong, I am just wondering.
Click to expand...
Click to collapse
From what I know, you have to be unrooted and on stock recovery for that to work.
azeem40 said:
From what I know, you have to be unrooted and on stock recovery for that to work.
Click to expand...
Click to collapse
I had unrooted my phone using magisk uninstaller and flashed stock recovery. It has something to do with encryption, but I am not quite sure.
hknisl said:
If so, how could they offer an OTA for customers? Don't get me wrong, I am just wondering.
Click to expand...
Click to collapse
Very good question. Even I wanna know how it is working technically.
azeem40 said:
From what I know, you have to be unrooted and on stock recovery for that to work.
Click to expand...
Click to collapse
I was unrooted and having stock recovery, still got bootloop. OnePlus basically messed up.