[ROM] CM11 for Otter - Kindle Fire General

Not my work, but I found this when looking for rastakat for my manta.
http://fitsnugly.euroskank.com/?rom=cm11&device=otter
TWRP WILL NOT WORK, AS IT FAILS WHEN FLASHING KITKAT BASED ROMS. TRY COTR INSTEAD, BUT THAT IS STILL NOT GUARANTEED.
The only recovery that worked on manta was CWM, but that's out for the otter obviously...
I would also assume to use Paranoid Android's odexed Gapps(so ART compiler works, and doesn't FC Gapps all the time)
Gapps: http://www.mediafire.com/folder/gxxxpkbcke4yi/PA_GApps_-_Official_Releases
And finally, CM11 might be pre-rooted, but if it isn't here's SuperSU
http://download.chainfire.eu/351/SuperSU/UPDATE-SuperSU-v1.65.zip
Can anyone confirm if it works? I haven't had time to flash yet.

Trying now
---------- Post added at 01:29 AM ---------- Previous post was at 01:04 AM ----------
It won't install with COTR or TWRP. So close ...

Actually, it is saying it is for Blaze devices and not Otter, but it says otter in the build.prop and it looks like a 1st gen to me.

dskrilz said:
Trying now
---------- Post added at 01:29 AM ---------- Previous post was at 01:04 AM ----------
It won't install with COTR or TWRP. So close ...
Click to expand...
Click to collapse
Okay, that's what I feared. Either TWRP or COTR have to be updated before they can flash KitKat ROMS. I am not sure why, but until that happens we can only look on and wait...

Cyan 4.4
Delete

incubus26jc said:
Here you go. I zipped up all 3 files you will need
Do Not flash my zip.
extract the 3 zips out to sd first and then flash.
flash twrp 2.6.3.1 first
Reboot recovery
then rom
then gapps.
no wifi.. Very fast
https://www.dropbox.com/s/sjfg4th2k5izqxb/Cyan-11-Unofficial-otter-11-11-13+gapps+twrp.zip
Click to expand...
Click to collapse
Awesome, thanks. Did you mess with the flashing/installer script? Let's try to get this thread moved to the dev section. Someone might be able to figure out the wifi issue and it might be a good base for others who might be working on a KitKat rom.

dskrilz said:
Awesome, thanks. Did you mess with the flashing/installer script? Let's try to get this thread moved to the dev section. Someone might be able to figure out the wifi issue and it might be a good base for others who might be working on a KitKat rom.
Click to expand...
Click to collapse
Yes i removed the blaze references on the updater script. Flashes and boots fine.

Just installed it. Wifi Doesn't work for now and its some graphical glitches but It hasn't been posted yet so its acceptable.

Just downloaded cm11 for otter from loosethisskin on goo.im. Only been playing with it for an hour. Wifi does work but it does have some graphic hiccups. Seems much faster than 4.3
Sent from my Amazon Kindle Fire using XDA Premium HD app

The ROM over at fitsnugly.euroskank. [com] /?rom=cm11&device=otter has been updated to cm-11-20131117.1708-otter and it is very nice. Just make sure to update latest Recovery version or it won't flash.

Was loving the 20131116 build, wifi worked and everything seemed stable enough to run my apps after I got it all setup. Unfortunately, after updating to the 20131117 build, wifi no longer works (dirty flashed for the 1117 update). And reverting back I still have no wifi. The off/on is disabled. Maybe I will try a factory reset and reinstall...
___
Update: I did a Factory Reset and then flashed both versions, still no wifi. It is still disabled/greyed out. After several attempts I realized I wiped everything but system and sd... *sigh*
Wiped system, all is good...

Anyone know how to get those nifty transparent bars with our build?

Related

[SOLVED] Reboots on Uninstalls

Droid Maxx on 4.4, unrooted (due to update). Every time I try to uninstall any app the phone soft reboots and the app remains. Anyone else experiencing this problem? I've found people in similar situations with devices like the Nexus 4 but their only fix was reflashing stock firmware and I'd prefer to not have to do that... Any solutions?
SORRY; please move to troubleshooting thread this doesn't belong here
Have you tried booting into Safe Mode and uninstalling the app there?
What about using House of Moto to flash back to stock 4.4 with keep data?
I had the same problem. You have to flash the dev image for Maxx 4.4. I'll be home in a few hours and will edit this post with a link if you haven't found it by then.
opt05 said:
Have you tried booting into Safe Mode and uninstalling the app there?
Click to expand...
Click to collapse
Yes i have - same result
I'm in a droid mini using the posted ota and I can install and uninstall just fine. The update you have, is it the one that was pushed officially, or the file from the other thread?
Sent from my XT1030 using Tapatalk
---------- Post added at 12:50 PM ---------- Previous post was at 12:45 PM ----------
Summersett said:
I had the same problem. You have to flash the dev image for Maxx 4.4. I'll be home in a few hours and will edit this post with a link if you haven't found it by then.
Click to expand...
Click to collapse
Had no luck trying to find it. What is the Dev image?
Sent from my XT1030 using Tapatalk
The fix that I used was found in the "Who's gonna leak the Soak Test?" thread: http://forum.xda-developers.com/showpost.php?p=48813998
I recommend reading the other posts in that topic (after the "fix" reply) to see what other uses had to do and what did or didn't work for them. I had to do all steps, including all of the fastboot stuff, to get mine to work, but it did retain all data. Good luck!
just had this issue, go ahead and place the 4.4 ota on your root again and flash it through your recovery menu. Just like you did to get 4.4 originally. You won't lose any files but it will fix your system data which right now is goofed up.
A simple try is to clear cache in system recovery. Can't hurt.
Sent from my XT1080 using Tapatalk
Kickbut101 said:
just had this issue, go ahead and place the 4.4 ota on your root again and flash it through your recovery menu. Just like you did to get 4.4 originally. You won't lose any files but it will fix your system data which right now is goofed up.
Click to expand...
Click to collapse
Worked perfectly, thank you very much

[Q]Droid Razr M, CM11: help configuring PagePlus 3G

Hello all,
I bought a used Droid Razr M on ebay a couple of months ago...(xt907). Then let it sit around for awhile
I recently rooted and unlocked the bootloader, following the recent forum posts for the kitkat update.
Just today I then successfully booted into twrp recovery, and installed CM11. Then booted into CM11 - yeah! This is progress!
I now have the goal of configuring the phone to work with PagePlus (Verizon 3G network).
I have found a good toutorial at howardformums, but the toutorial is for ICS, not for KitKat. My understanding is that the radio files, configuration, etc, is different and won't work with KitKat
I also notice that CM11 has some configuration options for which radio, network, etc, within settings.
I'm trying to figure out the specifics of the following:
1) Do I need to use CDMA workshop with CM11/KitKat to configure any settings?
2) I'm assuming I'll still need a donor phone to spoof this phone as 3G on network?
3) Can I just use OTA with CM11?
4) Are there any toutorials for CM11 with 3G providers? Or any distros pre-configured for this situation?
I've made it pretty far...just looking for a little help to make it to the next step...looking forward to getting this phone activated!
Thanks for any tips!
M
I don't know if this will help or not... I'm sorry I can't offer more then that
Sent from my XT907 using XDA Premium 4 mobile app
ezknives said:
I don't know if this will help or not... I'm sorry I can't offer more then that
Sent from my XT907 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One question, if you know: If I installed and configured ICS on my phone, would I then be able to upgrade to kitkat, and maintain the configuration information for my provider? Would KitKat automatically configure this info?
M
I honestly do not know as I'm a vzw 4g legacy plan (love that unlimited data) I don't really read the threads about gsm and other network carriers...
Sent from my XT907 using XDA Premium 4 mobile app
Well right now you've got 2 options.
1. I just recently found out that it's possible to activate a sim meid# and get calling/sms working through *228 but you need to get the meid from dfs.
This is for calling and text only data will not work other than wifi
http://www.howardforums.com/showthread.php?p=15221091
2. Downgrade to jb 4.1.2. Fastboot flash the ics radio
And perform the flash as instructed on Howard forums.
http://www.howardforums.com/showthread.php?p=15126290
Once everything is working on JB 4.1.2 you can flash twrp recovery and run cm11 builds before 7-1 and kitstalk rom is supporting the jb bootloader as well
---------- Post added at 01:32 AM ---------- Previous post was at 12:54 AM ----------
mattvrablik said:
One question, if you know: If I installed and configured ICS on my phone, would I then be able to upgrade to kitkat, and maintain the configuration information for my provider? Would KitKat automatically configure this info?
M
Click to expand...
Click to collapse
In short... No when you ota it'll flash/patch the radio and the only one programmable to page plus is the ics one. Thankfully it stayed compatible up to the last jb versions but broke on the kk update
thewraith420 said:
In short... No when you ota it'll flash/patch the radio and the only one programmable to page plus is the ics one. Thankfully it stayed compatible up to the last jb versions but broke on the kk update
Click to expand...
Click to collapse
What is the best rom to use for Page Plus/selectel compatibility or should you stick with stock Verizon Jelly-bean?
Any of the jellybean bootloader roms have been working great for me. On the kk bootloader roms you can't use the ics radio so the 1st link is the only option and it won't get you data
Thanks for all the info and help, I may go ahead and try using the suggested roms, links, etc...
*However*
There is a topic over at howard forums discussing the possibility that PagePlus may add Verizon 4g plans very soon...there is no official verificaiton or announcement, but supposedly this could happen as soon as August? I'm tempted to just wait it out another few weeks and see if I could just use a "PagePlus 4g" sim with kitkat....
....otherwise I'll use one of the older builds
Thanks!
mattvrablik said:
Thanks for all the info and help, I may go ahead and try using the suggested roms, links, etc...
*However*
There is a topic over at howard forums discussing the possibility that PagePlus may add Verizon 4g plans very soon...there is no official verificaiton or announcement, but supposedly this could happen as soon as August? I'm tempted to just wait it out another few weeks and see if I could just use a "PagePlus 4g" sim with kitkat....
....otherwise I'll use one of the older builds
Thanks!
Click to expand...
Click to collapse
I too am interested in that thread but then again most of the kk bootloader builds are more buggy than the jb ones right now. I'm currently running carbon rom from 6-30
thewraith420 said:
Well right now you've got 2 options.
1. I just recently found out that it's possible to activate a sim meid# and get calling/sms working through *228 but you need to get the meid from dfs.
This is for calling and text only data will not work other than wifi
2. Downgrade to jb 4.1.2. Fastboot flash the ics radio
And perform the flash as instructed on Howard forums.
Once everything is working on JB 4.1.2 you can flash twrp recovery and run cm11 builds before 7-1 and kitstalk rom is supporting the jb bootloader as well
---------- Post added at 01:32 AM ---------- Previous post was at 12:54 AM ----------
In short... No when you ota it'll flash/patch the radio and the only one programmable to page plus is the ics one. Thankfully it stayed compatible up to the last jb versions but broke on the kk update
Click to expand...
Click to collapse
So, just to clarify, even though the radio files only work for jb, I could downgrade to jb, configure, and then upgrade to CM11 up to 6-30-14? If so, I found this nightly build I could try the following file: cm-11-20140630-UNOFFICIAL-RAZR-HD_M-KITKAT.zip
(not allowed to post link, but found it posted by 'dhacker'
Edit: misunderstood the question. Yes that nightly is still on the jb bootloader and the m8 snapshot is the latest/last cm11 build to support it.
Also the phone can still be programmed on cm11. The important part is the ics radio and it can be used on the jb bootloader no problem but not on the new kk bootloader
thewraith420 said:
Edit: misunderstood the question. Yes that nightly is still on the jb bootloader and the m8 snapshot is the latest/last cm11 build to support it.
Also the phone can still be programmed on cm11. The important part is the ics radio and it can be used on the jb bootloader no problem but not on the new kk bootloader
Click to expand...
Click to collapse
Thanks for the tip...I took a break, but this will help as I finally try programming everything in the next week.
thewraith420 said:
Edit: misunderstood the question. Yes that nightly is still on the jb bootloader and the m8 snapshot is the latest/last cm11 build to support it.
Also the phone can still be programmed on cm11. The important part is the ics radio and it can be used on the jb bootloader no problem but not on the new kk bootloader
Click to expand...
Click to collapse
Hmmm...I just tried installing the special jb radio file on two different CM11 versions: one was m8, the other m7, and with both, it failed. I'll try another with an m6 version, but I wonder if that jb radio file (X907_Modem_SM_BP_1139.000.32.12P.xml) will only install with the earlier official verizon jb version (4.1.2)?
I'm running it right now on pac 8-11 and have used it on just about every rom available for the razr m you say it's failing to flash? That's likely a bad download. Can you unzip it?
thewraith420 said:
I'm running it right now on pac 8-11 and have used it on just about every rom available for the razr m you say it's failing to flash? That's likely a bad download. Can you unzip it?
Click to expand...
Click to collapse
I can unzip it, and I'm using Xubnuntu as my OS. I tried installing it using TeamWin recovery, and using RSD lite...both failed.
Just tried downloading it again (from link on Page Plus toutorial), and installing again with cm-11-20140720-NIGHTLY-moto_msm8960.zip. It fails in TWRP almost instantly.
Should I be using a different build? Is there another file I should flash first? I flash the cm rom, boot it one time, then try to flash the radio file...am I missing a step?
Thanks for the help...
M
Download the whole ics fxz and edit out everything in the xml except NON-HLOS.bin and erase modemst1 and modemst2 and flash that via rsd lite. I'm not sure why your previous attempts to flash aren't working but it's not the rom.
Edit: I made this with nobe1976's flashback zip. It'll flash the jb bootloader jb kernel and a jb bootloader compatible twrp recovery and I switched out the jb radio for the ics one
http://www.mediafire.com/view/vqjt9qa1sqyd9an
thewraith420 said:
Download the whole ics fxz and edit out everything in the xml except NON-HLOS.bin and erase modemst1 and modemst2 and flash that via rsd lite. I'm not sure why your previous attempts to flash aren't working but it's not the rom.
Edit: I made this with nobe1976's flashback zip. It'll flash the jb bootloader jb kernel and a jb bootloader compatible twrp recovery and I switched out the jb radio for the ics one
http://www.mediafire.com/view/vqjt9qa1sqyd9an
Click to expand...
Click to collapse
Hey, can I jump in here to say thanks for doing this! I replaced your files in the stock sbf, and am flashing now!
Whether I find the gumption to do all the pageplus crap tonight is another story ;b
---------- Post added at 07:43 PM ---------- Previous post was at 07:31 PM ----------
hemanolio said:
Hey, can I jump in here to say thanks for doing this! I replaced your files in the stock sbf, and am flashing now!
Whether I find the gumption to do all the pageplus crap tonight is another story ;b
Click to expand...
Click to collapse
Well, I was hopeful, but it just got stuck on the bootloader. No full boot.
hemanolio said:
Hey, can I jump in here to say thanks for doing this! I replaced your files in the stock sbf, and am flashing now!
Whether I find the gumption to do all the pageplus crap tonight is another story ;b
---------- Post added at 07:43 PM ---------- Previous post was at 07:31 PM ----------
Well, I was hopeful, but it just got stuck on the bootloader. No full boot.
Click to expand...
Click to collapse
I'm sorry I should have mentioned that was supposed to be flashed via custom recovery, and you may have to reflash cm11 afterwards
thewraith420 said:
I'm sorry I should have mentioned that was supposed to be flashed via custom recovery, and you may have to reflash cm11 afterwards
Click to expand...
Click to collapse
Totally worked! I now have everything up and running. Thanks!
Cool, glad to hear. All credit goes to nobe1976 all i did was swap out the radio for the ics one.

Cyanogenmod is officially supporting us!

Finally! Cyanogenmod is officially supporting Kltespr! http://download.cyanogenmod.org/?device=kltespr (sorry if i'm late)
Yup You wanna know what else that means? CUSTOM ROMS
I just read an article online about this a few hours ago, it is about time lol I did stumble onto a youtube video with what looked like a ported CM for the S5, but the user noted some serious bugs. I'm psyched we now have official support for the ROM!
However if you try to flash it gives the error of this is for kltespr. You have klte installation aborted. See website.https://download.cyanogenmod.org/?device=kltespr
I contacted cyangenmod and was told to update recovery. I am using Philz cwm
In another post I came across said t try this recovery. Haven't tried yet though as at work
kmcphee said:
However if you try to flash it gives the error of this is for kltespr. You have klte installation aborted. See website.https://download.cyanogenmod.org/?device=kltespr
I contacted cyangenmod and was told to update recovery. I am using Philz cwm
In another post I came across said t try this recovery. Haven't tried yet though as at work
Click to expand...
Click to collapse
downloading now I will try it with newest philz recovery..I'll let you know if it works.
How do you properly flash this new recovery? I tried just using recovery to install it from the zip but this TWRP wont even let me install any ROMs. Not sure what I'm doing wrong here.
euklid said:
downloading now I will try it with newest philz recovery..I'll let you know if it works.
Click to expand...
Click to collapse
Any luck? About to try myself.
euklid said:
downloading now I will try it with newest philz recovery..I'll let you know if it works.
Click to expand...
Click to collapse
Any luck?
IT WORKS!
The recovery link in one of the comments above (KT ALL IN ONE) worked. It includes a kernel too, but I've spent so much time trying to fix this that I don't even care. I tested it by downloading a kltespr build directly from CyanogenMod and it flashed just fine. No error. Finally...
Sent from my SM-G900P using XDA Free mobile app
abstraction21 said:
Any luck? About to try myself.
Click to expand...
Click to collapse
yeah only the recovery posted above works..neither TWRP or philz (newest ones) work.
In Google play store do you have an option to pay with your Verizon account? I'm on sprint
Thanks for the custom recovery. I'm able to install nightlies now
I can no gps the e gps to work. I have been trying since the first release
AOD_Corwin said:
I can no gps the e gps to work. I have been trying since the first release
Click to expand...
Click to collapse
Is your location on in settings?? Mine is working fine on latest nightly.
Yeap. Also tried turning it off, then back on, restoring efs, flipping it to airplane mode then back and changing my apn then back. Also tried with different kernel .
AOD_Corwin said:
I can no gps the e gps to work. I have been trying since the first release
Click to expand...
Click to collapse
Bummer, this is always an issue with CM builds. I was hoping this time would be different.
A common fix for GPS CM builds On HTC phones was a way to Reset the GPS using ##GPSCLRX# code in the phone pad which requires you use the Native OS to get codes working.
I need my msl for this
AOD_Corwin said:
I need my msl for this
Click to expand...
Click to collapse
Ask sprint for it or download an app that requires root to get it.
---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------
So how is this running for folks?
Does anyone know if you can tether with it?
Does LTE work Ok?
Can you revert back to Samsung based ROM without issue?
Official CM Thread if anyone was curious.
http://forum.cyanogenmod.org/forum/1118-samsung-galaxy-s5-sprint-kltespr/
Read through the threads and you will see which files need to be edited if you are having issues flashing this
This ROMs been working great for me. The only reoccurring problem I've had so far is random camera errors with google camera, but usually closing/reopening fixes it. LTE to 3g and back is no prob. MMS works. IR works with some apps but not all. GPS wasn't working for the first few builds but around 9/24 I got it working. Don't know if it was the ROM or me. Had to hold quick tile, disable Google location reporting then enable it again. I've been dirty flashing I guess? Wipe cache and dalvik then flash new ROM with gapps. The whole script edit thing is unnecessary if you're using the KT modded twrp. And if you would rather edit the script, do it in winrar on a windows machine and you wont have any problems. Snapshot of battery life after a typical workday. Theme I'm using is MustardSeed by Thyrus, on the play store

OxygenOS 3 Black screen after reboot

Hello!
Ever since trying out the first OO3 Beta (3.0.0) I have gotten a weird bug, flashing the ROM works fine and everything works all the way until I reboot my phone. It loads through the bootanimation and then it just has a black screen and you can see the notification bar flash every 5 seconds or so. This issue also come up on the newest 3.0.1 beta.
I've tried different ways of flashing using the modified recovery and the modified supersu (also without the supersu) but I still get the same issue. I've tried different OO3 ROMs as well like Skydragon and CyanOxy but I get the same bug.
I haven't seen anyone post something about the same issue so I figured I'd ask, sorry if this already has been answered and I missed it.
Thanks in advance.
Same happend to me, always get that black screen, try to reboot once you are in it, works for me.
I've tried rebooting a few times and still got the same result, unfortunately.
Thanks for the advice anyways!
Hi,
I'm facing exactly same issue since new OTA update...
Did you manage to fix it?
Hey Endoloris.
I haven't been able to fix it yet unfortunately. I've really tried almost everything at this point which makes me think there's something odd with the hardware, but I don't really know.
I'll update this thread if I fix it.
Have you uninstalled the Google Search app?? Every time I trie to uninstall the Google app I get the same problem. Now I just let it on my phone.
Edit:
Have you flashed the right firmware for OxygenOS 3??
LordHelmchen89 said:
Have you uninstalled the Google Search app?? Every time I trie to uninstall the Google app I get the same problem. Now I just let it on my phone.
Edit:
Have you flashed the right firmware for OxygenOS 3??
Click to expand...
Click to collapse
Yes, I've tried both those options. I've tried pretty much everything. I even tried restoring the phone to stock 2.2.1 and then updating via OTA and I still got the same issue.
So the weird thing is that I get the same issue on the new Paranoid Android ROM released today.
Adhas said:
So the weird thing is that I get the same issue on the new Paranoid Android ROM released today.
Click to expand...
Click to collapse
Really strange...sorry,but Ican't help you then. Maybe you ask one of the devs with pm.
---------- Post added at 04:07 PM ---------- Previous post was at 04:02 PM ----------
Are you realy sure, that you flashed the right TWRP and firmware?? Or do you use a custom kernel.
Sorry, my last ideas...
I did try different firmwares, it didn't work at all with the old ones for obvious reasons. I tried the twrp 3.0.2 Hybrid, a custom recovery when the first Oxygen 3 beta came out (was orange), and I tried the recovery made by Grarak recently. I also tried using stock recovery and flashing.
No custom kernel, I've tried flashing with the modified Supersu but I was thinking that it might be causing the issue so I tried without root and I still got the same result.
In the same boat here, was running official CM, then this happened.

How to flash to another custom kernel.

I'm using a custom kernel on my rooted device and want to try out another. Do I need to flash back to the stock kernel before flashing to the other kernel or I can just flash it on top of my custom kernel?
If I have to flash back to stock kernel is there a place I could download the stock kernel?
Using EXKM and rom is 10.5.8.IN11AA
Sorry for the noob question I am completely new to this.
Although you can get by prolly by flashing another, I've always gone by flashing stock, and THEN the new kernel, and what I recommend. Believe others would do. As far as the stock kernel, I wanna say there's a thread somewhere that has them posted, but you may have to search.
Truant_Luce said:
Although you can get by prolly by flashing another, I've always gone by flashing stock, and THEN the new kernel, and what I recommend. Believe others would do. As far as the stock kernel, I wanna say there's a thread somewhere that has them posted, but you may have to search.
Click to expand...
Click to collapse
I did try to search but I read a lot of people try to extract it from the stock rom or something like that. I'm not sure how to do that though.
If somebody could post a link on the stock kernel file that would be great
matchankh said:
I did try to search but I read a lot of people try to extract it from the stock rom or something like that. I'm not sure how to do that though.
If somebody could post a link on the stock kernel file that would be great
Click to expand...
Click to collapse
Go here, download the 10.5.8 2023 BA variant for your device, confirm hash. Go to settings, syatem updates, cog wheel, local upgrade, select package. I THINK it'll let you flash it like an upgrade, but don't quote me, I am not to familiar with the device yet, or oneplus in general. Just flash magisk to other boot slot after if it says your device will no longer be rooted stuff, you know. The typical.
I'ma go to bed, but if that doesn't work, you can see about opening the .zip up, extract the payload and search google for a method that'll extract the kernel for you. Best of luck.
Oh, and in case it wasn't reiterated, back up persist partition too. Just in case, always. In case it wasn't obvious.
Truant_Luce said:
Go here, download the 10.5.8 2023 BA variant for your device, confirm hash. Go to settings, syatem updates, cog wheel, local upgrade, select package. I THINK it'll let you flash it like an upgrade, but don't quote me, I am not to familiar with the device yet, or oneplus in general. Just flash magisk to other boot slot after if it says your device will no longer be rooted stuff, you know. The typical.
I'ma go to bed, but if that doesn't work, you can see about opening the .zip up, extract the payload and search google for a method that'll extract the kernel for you. Best of luck.
Oh, and in case it wasn't reiterated, back up persist partition too. Just in case, always. In case it wasn't obvious.
Click to expand...
Click to collapse
Is there a specific reason that I would flash to BA not AA?
So I would lose root and have to reinstall magisk is that correct?
PS I also have nolimit rom installed.
matchankh said:
I did try to search but I read a lot of people try to extract it from the stock rom or something like that. I'm not sure how to do that though.
If somebody could post a link on the stock kernel file that would be great
Click to expand...
Click to collapse
matchankh said:
Is there a specific reason that I would flash to BA not AA?
So I would lose root and have to reinstall magisk is that correct?
PS I also have nolimit rom installed.
Click to expand...
Click to collapse
My apologies, I thought I saw you said IN11BA, not IN11AA. Do the AA. Caught me right before I fell asleep. But putting phone on charger. Good night.
---------- Post added at 11:19 PM ---------- Previous post was at 11:17 PM ----------
matchankh said:
Is there a specific reason that I would flash to BA not AA?
So I would lose root and have to reinstall magisk is that correct?
PS I also have nolimit rom installed.
Click to expand...
Click to collapse
And magisk.... Open magisk up and flash to other slot after you do the system update. Tada. Recommended to disable modules first.
Truant_Luce said:
My apologies, I thought I saw you said IN11BA, not IN11AA. Do the AA. Caught me right before I fell asleep. But putting phone on charger. Good night.
---------- Post added at 11:19 PM ---------- Previous post was at 11:17 PM ----------
And magisk.... Open magisk up and flash to other slot after you do the system update. Tada. Recommended to disable modules first.
Click to expand...
Click to collapse
If mine is the Chinese version which was flashed to global rom, will it be stuck in bootloop again if I update it from OTA again?
It was stuck the first time round and I had to wipe cache and setting.
matchankh said:
Is there a specific reason that I would flash to BA not AA?
So I would lose root and have to reinstall magisk is that correct?
PS I also have nolimit rom installed.
Click to expand...
Click to collapse
matchankh said:
If mine is the Chinese version which was flashed to global rom, will it be stuck in bootloop again if I update it from OTA again?
It was stuck the first time round and I had to wipe cache and setting.
Click to expand...
Click to collapse
It SHOULDN'T but I also provide no guarantee, as not specifically certain. But I do highly doubt it would be stuck in bootloop again, it's just the first time around.
Truant_Luce said:
It SHOULDN'T but I also provide no guarantee, as not specifically certain. But I do highly doubt it would be stuck in bootloop again, it's just the first time around.
Click to expand...
Click to collapse
Ok I'll give it shot. Really appreciate your help!
Btw do you have any kernel you recommend for battery life.Using ElementalX at the moment but don't see much difference between stock.
matchankh said:
Ok I'll give it shot. Really appreciate your help!
Btw do you have any kernel you recommend for battery life.Using ElementalX at the moment but don't see much difference between stock.
Click to expand...
Click to collapse
Using elementalX myself atm. Although I'm always interested in what others bring, too.
matchankh said:
Ok I'll give it shot. Really appreciate your help!
Btw do you have any kernel you recommend for battery life.Using ElementalX at the moment but don't see much difference between stock.
Click to expand...
Click to collapse
Omega

Categories

Resources