Database Users

cm10 internet problems.

I recently installed cm10 on my new s4 but the 3g speeds are really slow. WiFi is slow too. I saw a forum with the same problem with the HTC one. They said it was a problem with the baseband. Any help would be great because I'm not a huge fan of the stock os even though the internet runs great on it.

anyone know of any basebands that work. I would appreciate any help

weinerwad3000 said:
anyone know of any basebands that work. I would appreciate any help
Click to expand...
Click to collapse
You could always try to go to a Touchwiz Rom, update the prl and profile, and then flash back to cm10. I've heard that can speed up data a bit
You also could try flashing the MDL modem with Cm10...that might help as well http://forum.xda-developers.com/showthread.php?t=2338919

MHousos said:
You could always try to go to a Touchwiz Rom, update the prl and profile, and then flash back to cm10. I've heard that can speed up data a bit
You also could try flashing the MDL modem with Cm10...that might help as well http://forum.xda-developers.com/showthread.php?t=2338919
Click to expand...
Click to collapse
I don't think updating in the stock rom will have any affect since the internet on the stock rom runs fine. It's only after I install cm10 that the internet starts to bog down.

MHousos said:
You could always try to go to a Touchwiz Rom, update the prl and profile, and then flash back to cm10. I've heard that can speed up data a bit
You also could try flashing the MDL modem with Cm10...that might help as well http://forum.xda-developers.com/showthread.php?t=2338919
Click to expand...
Click to collapse
I did the odin thing and now my stock rom can't use wifi. When I enable it it says an app is trying to get certain permissions and wifi immediately gets disabled. It tells me to reboot the phone and I do so and same problem occurs. I did come to find that when on cm10 the internet does work but the play store and pandora only work on wifi. I get connection errors on 3g with those two apps.

Try to flash a custom kernel or flash a different AOSP ROM.
Sent from my SCH-I545 using xda premium

nicotheandroidguy said:
Try to flash a custom kernel or flash a different AOSP ROM.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Not sure why the kernel would affect it. I was trying to find an aokp version that would work for sprint but couldn't find one.

It could help the WiFi issues because when my WiFi wouldn't work I flashed a custom kernel and it would work.
Sent from my SCH-I545 using xda premium
---------- Post added at 07:44 PM ---------- Previous post was at 07:40 PM ----------
weinerwad3000 said:
Not sure why the kernel would affect it. I was trying to find an aokp version that would work for sprint but couldn't find one.
Click to expand...
Click to collapse
You might like this rom it is a mix of cm and aokp it's called Packman ROM it looks really good.
http://forum.xda-developers.com/showthread.php?t=2312063
Sent from my SCH-I545 using xda premium

nicotheandroidguy said:
It could help the WiFi issues because when my WiFi wouldn't work I flashed a custom kernel and it would work.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Oh you mean for the stock rom? I don't want to use the stock ROM if I can get the play store and Pandora working on cm10. The stock ROM is saying its a security issue and not just an error with the WiFi so I don't think that would help. The problem started after I installed the modem in Odin.

For both I also recommend checking out that ROM it seems like what you want in a ROM customization, AOSP, and the stabability of CM. Here is the link http://forum.xda-developers.com/showthread.php?t=2312063 if not check the original android development section it is filled with great AOSP roms similar to CM or better.
Sent from my SCH-I545 using xda premium

There is many cases that aosp roms/kernals have slow data speeds. The epic 4g touch was one. All aosp or touchwiz roms with non stock kernal had poor data speeds. This phone may be different. Im running tw rom with kt kernal and data speeds are the same. The prl/profile thing is huge not being able to update it in aosp can cause problems.

I installed pacman ROM and the gapps and Google play immediately stops working and a message pops up every 5 seconds and the internet won't load. I got Google to load once and that was it. I had to switch back to cm10.

weinerwad3000 said:
I installed pacman ROM and the gapps and Google play immediately stops working and a message pops up every 5 seconds and the internet won't load. I got Google to load once and that was it. I had to switch back to cm10.
Click to expand...
Click to collapse
I get this message on every ROM I install now unless I restore my cm10 ROM. When I restore my stock ROM WiFi don't work.

weinerwad3000 said:
I get this message on every ROM I install now unless I restore my cm10 ROM. When I restore my stock ROM WiFi don't work.
Click to expand...
Click to collapse
OK fixed the play store problem. The other day I enabled lte in data profile but my area doesn't have lte. I still have to fix the WiFi problem.

MHousos said:
You could always try to go to a Touchwiz Rom, update the prl and profile, and then flash back to cm10. I've heard that can speed up data a bit
You also could try flashing the MDL modem with Cm10...that might help as well http://forum.xda-developers.com/showthread.php?t=2338919
Click to expand...
Click to collapse
so I reinstalled the moden to get my wifi working but I used odin ti flash a stock rom but it was for tmobile and now I dont have roaming.

weinerwad3000 said:
so I reinstalled the moden to get my wifi working but I used odin ti flash a stock rom but it was for tmobile and now I dont have roaming.
Click to expand...
Click to collapse
I'm glad flashing the modem helped....what rom did you want to flash?

MHousos said:
I'm glad flashing the modem helped....what rom did you want to flash?
Click to expand...
Click to collapse
I want a working stock rom for backup but rom manager doesnt work because my stock rom is tmobile and I have sprint. ill just look for cwm recovery for sprint and ditch this ****.

weinerwad3000 said:
I want a working stock rom for backup but rom manager doesnt work because my stock rom is tmobile and I have sprint. ill just look for cwm recovery for sprint and ditch this ****.
Click to expand...
Click to collapse
Here's the latest stock rom for our Sprint GS4 http://forum.xda-developers.com/showthread.php?p=41192248
Hope it helps

MHousos said:
Here's the latest stock rom for our Sprint GS4 http://forum.xda-developers.com/showthread.php?p=41192248
Hope it helps
Click to expand...
Click to collapse
Awesome thanks.

Not sure what happened but the error is back

New User - Problem with Update after rooting

I'm sorry for having to post here, I'm a new XDA member and I've just started using my tablet and found out I can't post in the dev section. I'm not sure how else to get help and a previous boyfriend told me the xda-developers community was a great place so I thought I would try here.
I have the Nexus 7 (2013 edition) and I used WUG's method of rooting - everything went perfectly, but now I'm getting a notification that there is an update (an OTA update - I think that's what they are called?) and it doesn't apply. I'm not sure if I should have, but I did the bootloader unlock and installed a new recovery (TWRP - I think that's how it's spelled?. sorry again)...
Anyway.... At this point my tablet is working great, but I constantly see this notification for an update and I'm not sure what to do.. It says "touch to install" and I've done that but it just boots into my new recovery. If anybody has access to WUG in the dev forum, could you please ask him what I should do?
Thanks!!!!!!!!!!!!!!

BarbaraG said:
I'm sorry for having to post here, I'm a new XDA member and I've just started using my tablet and found out I can't post in the dev section. I'm not sure how else to get help and a previous boyfriend told me the xda-developers community was a great place so I thought I would try here.
I have the Nexus 7 (2013 edition) and I used WUG's method of rooting - everything went perfectly, but now I'm getting a notification that there is an update (an OTA update - I think that's what they are called?) and it doesn't apply. I'm not sure if I should have, but I did the bootloader unlock and installed a new recovery (TWRP - I think that's how it's spelled?. sorry again)...
Anyway.... At this point my tablet is working great, but I constantly see this notification for an update and I'm not sure what to do.. It says "touch to install" and I've done that but it just boots into my new recovery. If anybody has access to WUG in the dev forum, could you please ask him what I should do?
Thanks!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Do you have the WiFi only version or the LTE version? Also, under your settings -> about phone, what build number are you currently on? Since you have rooted and installed a custom recovery, OTA updates will not install correctly. You have a couple of options in this regards, and I or someone will go over them once we figure out what version you are running.

railed said:
Do you have the WiFi only version or the LTE version? Also, under your settings -> about phone, what build number are you currently on? Since you have rooted and installed a custom recovery, OTA updates will not install correctly. You have a couple of options in this regards, and I or someone will go over them once we figure out what version you are running.
Click to expand...
Click to collapse
ThankYou so much for the help... It's the WiFi only version. The build number is: JSS15J

http://forum.xda-developers.com/showthread.php?t=2404833

BarbaraG said:
ThankYou so much for the help... It's the WiFi only version. The build number is: JSS15J
Click to expand...
Click to collapse
Thanks for that:
Here's what you can do to install the update.
1) go to this thread and download either the odexed or deodexed version.
2) Reboot to recovery
3) Wipe Cache/Dalvik Cache
4) Flash the .zip file you just downloaded
5) Reboot your updated tablet.
OR
You can read here and try this.

railed said:
Thanks for that:
Here's what you can do to install the update.
1) go to this thread and download either the odexed or deodexed version.
2) Reboot to recovery
3) Wipe Cache/Dalvik Cache
4) Flash the .zip file you just downloaded
5) Reboot your updated tablet.
OR
You can read here and try this.
Click to expand...
Click to collapse
Oh railed, thankyou so much - I was not sure if I would be able to get any more updates. If I do that, will it delete everything on my tablet? It did that when I did the change to an unlocked bootloader, and I had to reload everything.

BarbaraG said:
Oh railed, thankyou so much - I was not sure if I would be able to get any more updates. If I do that, will it delete everything on my tablet? It did that when I did the change to an unlocked bootloader, and I had to reload everything.
Click to expand...
Click to collapse
All your data will be preserved. Only Wipe the Cache/Dalvik Cache, not the Data. Before you install go to Wipe -> Advance -> Check only Cache and Dalvik Cache.
Typically when an update comes out, someone will post a flashable update within a couple of hours so we can install them as well. Hope it helps.
Edit: As always before flashing anything, make a backup, by rebooting into recovery and selecting Backup (i check all the boxes).

BarbaraG said:
Oh railed, thankyou so much - I was not sure if I would be able to get any more updates. If I do that, will it delete everything on my tablet? It did that when I did the change to an unlocked bootloader, and I had to reload everything.
Click to expand...
Click to collapse
Also.... If I just load the latest cyanogenmod on it, will that take care of it. I have the same old phone from my previous boyfriend and it's running cyanogenmod.. It will update the OS whenever a new version comes out and I don't lose the data like I did with the unlock bootloader thing?

BarbaraG said:
Also.... If I just load the latest cyanogenmod on it, will that take care of it. I have the same old phone from my previous boyfriend and it's running cyanogenmod.. It will update the OS whenever a new version comes out and I don't lose the data like I did with the unlock bootloader thing?
Click to expand...
Click to collapse
I believe so, Cyanogenmod usually merges the updates pretty quickly into the code and you won't get any update notifications from Google directly any more. There are only nightly releases so far for this device if you feel like going that route.

railed said:
I believe so, Cyanogenmod usually merges the updates pretty quickly into the code and you won't get any update notifications from Google directly any more. There are only nightly releases so far for this device if you feel like going that route.
Click to expand...
Click to collapse
Thank You! Very Much!!!
Do you think I should go the cyanogenmod route?
I've really liked cyanogenmod on the phone on barnes&noble device they are on, but I've been scared to update this tablet since we've broken up and I don't have anybody that can help.

BarbaraG said:
Thank You! Very Much!!!
Do you think I should go the cyanogenmod route?
I've really liked cyanogenmod on the phone on barnes&noble device they are on, but I've been scared to update this tablet since we've broken up and I don't have anybody that can help.
Click to expand...
Click to collapse
That's completely up to you and what you prefer... I like the stock android experience so far, but there are many options out there for custom ROMs besides CM. Take a look here and here and figure out if a ROM in there has something you want... the great thing about this is if you don't like it, flash something else until you find exactly what you like... that's how I plan to do it, once the ROMs get more stable with the 4.3 updates.

railed said:
Thanks for that:
Here's what you can do to install the update.
1) go to this thread and download either the odexed or deodexed version.
2) Reboot to recovery
3) Wipe Cache/Dalvik Cache
4) Flash the .zip file you just downloaded
5) Reboot your updated tablet.
OR
You can read here and try this.
Click to expand...
Click to collapse
I've been reading through all of the links you sent and some others I've found. Should I go with the odexed or deodexed version?

BarbaraG said:
I've been reading through all of the links you sent and some others I've found. Should I go with the odexed or deodexed version?
Click to expand...
Click to collapse
I use deodexed, as do a lot of people who like to customize. There's not a lot of difference between the two. Here is an article that explains it pretty well: Odexed vs Deodexed

railed said:
I use deodexed, as do a lot of people who like to customize. There's not a lot of difference between the two. Here is an article that explains it pretty well: Odexed vs Deodexed
Click to expand...
Click to collapse
Thank You, I now know the difference between them. I think I'll go with the Deodexed version also.
Thanks again for all of your help!!!!!

[Q] Blame Tyler. HELP!

I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.

Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
Same.

Same.
:crying:

Same.
Edit. I tried flashing the ROM by itself then booting the device. Then reboot into recovery and flash the gapps. It worked for me and I have seen others say it is hit or miss. It is worth a try though.

ernieb4768 said:
Same.
Edit. I tried flashing the ROM by itself then booting the device. Then reboot into recovery and flash the gapps. It worked for me and I have seen others say it is hit or miss. It is worth a try though.
Click to expand...
Click to collapse
This doesn't work for me... anyone got a solution? That's annoying..

Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
Did you try a clean install?
-wipe data/factory reset
-flash ROM
-flash gapps
-restart
no "restore"
If you say you had an "Older" version, does this mean you were on PAC23 (with android version 4.2.2)?
If you are on a pre-android 4.3 version of PAC, you need to do a full wipe. If you are already on a 4.3 version of PAC and you have "blame tyler" issues, try factory reset, if the problem persists, try a different nightly

Just a little curious...is the Blame Tyler error a specific error or set of errors, or does Tyler get blamed for everything?
Also, can we get Tyler's xda username, so he can get the blame he deserves :laugh:

Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
try redownloading the rom zip! and check its md5 code before flashing!!
also do a clean flash! all wipes!
if it doesnt work then even try fix permissions option !
Sent from my C6603 using Tapatalk 4

'Blame Tyler' error is just a generic message displayed when some component crashes/throws an unhandled exception, etc. It's not related to a bad ROM d/l or MD5 code. Telling people to do a full wipe b/c of an undiagnosed error condition doesn't help much. There are far too many little brokens with this ROM that need to be addressed and given more developer support, if this ROM is get more adoption.
Since RC1, nightlies have been dropping for 2 months now - no log of what's fixed or added, unless you are a dev who can wade thru the build change logs and understand what that means. It's ridiculous that we've gone this long since RC1 with a new stable release and documented fixes. Maybe this info is buried somewhere, but it's not in the Spring GS4 forum and the Pac-Man website forum is dead.
These errors are not specific to any one nightly and have been going on for months.

the tyler message is just a replacement of the force close messages. It is meant as a joke as he is one of our devs and we all take turns being blamed for breaking stuff.
If your coming from the old stable and flashing the newest nightile...comming from 4.2.2. to 4.3.1 then a full wipe is required due to the different databases and newer code that isnt compatable with the old version. This should fix your issues.
Also please dont post tylers username as its not nice to go and troll him...

I flashed the rom successfully after a full wipe this weekend. Amazeballs. I blame Tyler for making all my friends jealous of my phone.
I want to keep up with nightlies. The only thing not working for me is the wifi tether. If I have the US snapdragon quad-core variant do I want the pac-jfltetmo.zip?
Sent from my SGH-M919 using xda app-developers app

experienced the same problem and would be greatful for help

vedhed21 said:
I flashed the rom successfully after a full wipe this weekend. Amazeballs. I blame Tyler for making all my friends jealous of my phone.
I want to keep up with nightlies. The only thing not working for me is the wifi tether. If I have the US snapdragon quad-core variant do I want the pac-jfltetmo.zip?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Yes, if you have the T-Mobile variant of the S4.

keyboard not working.....
Papa Smurf151 said:
the tyler message is just a replacement of the force close messages. It is meant as a joke as he is one of our devs and we all take turns being blamed for breaking stuff.
If your coming from the old stable and flashing the newest nightile...comming from 4.2.2. to 4.3.1 then a full wipe is required due to the different databases and newer code that isnt compatable with the old version. This should fix your issues.
Also please dont post tylers username as its not nice to go and troll him...
Click to expand...
Click to collapse
i have flashed your pac man rom to my galaxy sl everything went right but its keyborad was not working then i manually flashed another JB keyboard in recovery mode... then it worked ... and i flashed blackgapps(JB 4.2.2) from ENHDROIX developers and it is working quite well...
the only problem i had was keyboard stuff..
so devs should fix that issue...

GUYS THIS IS VERY STRANGE.. The nav bar at the bottom overlaps half of the dock of next launcher which makes the dock completely unusable and ugly.. the same problem persist in 50% of the other apps notably go sms, quick pic, go launchers and many others.. I have tried the milestone releases and a few latest nightlies but its still not fixed..
Its hard to believe there are many discussions of issues about pac rom going on but I didn't find this preety obvious and significant one anywhere..
I have waited like 3 months since I started with pac, updated about 5 nightlies along the way hoping it will be fixed but no luck everytime..
This one is serious.. It has forced me not to use some of my fav apps and use pie navigation at times..
No problem with all the minor bugs but this one is frustrating..
ANY IDEA GUYS??
PS. pac ver 4.3.1 on sg tab p3100 and sg3
Sent from my GT-P3100 using XDA Premium 4 mobile app

Do you know how to enable navigation bar? I saw all the settings in PAC settings>navigation bar but found no option to enable it.
Sent from my GT-P3100 using XDA Premium 4 mobile app

OxygenOS 3 Black screen after reboot

Hello!
Ever since trying out the first OO3 Beta (3.0.0) I have gotten a weird bug, flashing the ROM works fine and everything works all the way until I reboot my phone. It loads through the bootanimation and then it just has a black screen and you can see the notification bar flash every 5 seconds or so. This issue also come up on the newest 3.0.1 beta.
I've tried different ways of flashing using the modified recovery and the modified supersu (also without the supersu) but I still get the same issue. I've tried different OO3 ROMs as well like Skydragon and CyanOxy but I get the same bug.
I haven't seen anyone post something about the same issue so I figured I'd ask, sorry if this already has been answered and I missed it.
Thanks in advance.

Same happend to me, always get that black screen, try to reboot once you are in it, works for me.

I've tried rebooting a few times and still got the same result, unfortunately.
Thanks for the advice anyways!

Hi,
I'm facing exactly same issue since new OTA update...
Did you manage to fix it?

Hey Endoloris.
I haven't been able to fix it yet unfortunately. I've really tried almost everything at this point which makes me think there's something odd with the hardware, but I don't really know.
I'll update this thread if I fix it.

Have you uninstalled the Google Search app?? Every time I trie to uninstall the Google app I get the same problem. Now I just let it on my phone.
Edit:
Have you flashed the right firmware for OxygenOS 3??

LordHelmchen89 said:
Have you uninstalled the Google Search app?? Every time I trie to uninstall the Google app I get the same problem. Now I just let it on my phone.
Edit:
Have you flashed the right firmware for OxygenOS 3??
Click to expand...
Click to collapse
Yes, I've tried both those options. I've tried pretty much everything. I even tried restoring the phone to stock 2.2.1 and then updating via OTA and I still got the same issue.

So the weird thing is that I get the same issue on the new Paranoid Android ROM released today.

Adhas said:
So the weird thing is that I get the same issue on the new Paranoid Android ROM released today.
Click to expand...
Click to collapse
Really strange...sorry,but Ican't help you then. Maybe you ask one of the devs with pm.
---------- Post added at 04:07 PM ---------- Previous post was at 04:02 PM ----------
Are you realy sure, that you flashed the right TWRP and firmware?? Or do you use a custom kernel.
Sorry, my last ideas...

I did try different firmwares, it didn't work at all with the old ones for obvious reasons. I tried the twrp 3.0.2 Hybrid, a custom recovery when the first Oxygen 3 beta came out (was orange), and I tried the recovery made by Grarak recently. I also tried using stock recovery and flashing.
No custom kernel, I've tried flashing with the modified Supersu but I was thinking that it might be causing the issue so I tried without root and I still got the same result.

In the same boat here, was running official CM, then this happened.

How to install Cyanogenmod?

Very confused about the process of installing Cyangenmod on my phone. How do I install the unlocked firmware?

You may just want to wait if you are asking these questions. CM is still in alpha stages anyways, not everything is working for it to be a daily driver imo.

CM is definitely outta alpha stages

trev23sks said:
CM is definitely outta alpha stages
Click to expand...
Click to collapse
You cafe to back that statement up? Like, what isn't working, and. Your source?
Sent from my 2PS64 using XDA-Developers mobile app

And, this hasn't been answered.
I've Super CID.
I've RUU'd to the latest Sprint version, and I just sit at the boot animation forever.

mcwups1 said:
And, this hasn't been answered.
I've Super CID.
I've RUU'd to the latest Sprint version, and I just sit at the boot animation forever.
Click to expand...
Click to collapse
That is because you cannot do it that way which is why you bootlooped. The CM threads speak of this numerous times. You need to RUU the US developer, then FLASH a Sprint variant ROM (like Bad Boys), then wipe and install CM which will work. The other option is to just use the developer edition with SuperCID/MID and then CM will work without flashing back to Sprint ROM's. I would go with the first option as you will gain better LTE as you wont be on Sprint's "global" connections.

GROOVYJOSHCLARK said:
That is because you cannot do it that way which is why you bootlooped. The CM threads speak of this numerous times. You need to RUU the US developer, then FLASH a Sprint variant ROM (like Bad Boys), then wipe and install CM which will work. The other option is to just use the developer edition with SuperCID/MID and then CM will work without flashing back to Sprint ROM's. I would go with the first option as you will gain better LTE as you wont be on Sprint's "global" connections.
Click to expand...
Click to collapse
Flash a Sprint ROM, or the Sprint firmware?
Thank you in advance for your help.
Also, which one of the RUU do I grab?
There are many, many RUU's. Which am I looking for?

discomaniac said:
Very confused about the process of installing Cyangenmod on my phone. How do I install the unlocked firmware?
Click to expand...
Click to collapse
PM me
Sent from my HTC 10 using XDA-Developers mobile app

Such a shame this thread went to PM. It seems like it would have been good basic information for experienced flashers whom are new to the HTC world. I came from the Galaxy S5 (SM-900R7 nTelos variant), and had been testing out LineageOS 14.1 on it (as an update to CM13, which I was building myself). This thread would have been helpful to help flash the HTC10 version. Still learning it. Quite different from the Samsungs, for sure!

would someone mind either posting in the thread or PM me back with a link or guide, step by step how to install Cyanogenmod. I have rooted a few Samsung phones before, but once I have them rooted and running stable I usually leave them alone...point being I have not rooted a phone in two years....
I'll be getting my HTC 10 Sprint phone tomorrow, so I would love a full step by step how to root, install twrp and finally how to install the ROM...BTW I used to run a ROM called liquid smooth....does that ROM still exists?
Is Cyanogenmod the best most stable ROM for the HTC 10 Sprint?

Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.

I can't seem to find the instructional thread..? I've been rooting & flashing HTC phones since the HTC 4G LTE, but this thing is a different beast entirely. I've unlocked via HTC Dev, installed unofficial TWRP 3.0.3-9, flashed the custom SU, & installed Viper (did all that from stock N). Viper is definitely super solid, but I've always preferred the CM/AOSP platform. I've wiped the internal like I've done a thousand times & flashed Lineage + gapps (arm64). the phone boots & gets to the lineage boot animation & sits there indefinitely. I let it sit for almost an hour, & obviously it wasn't going to boot.
What am I missing, guys? Any & all help will be greatly appreciated.

any ideas?

King of the Couch said:
I can't seem to find the instructional thread..? I've been rooting & flashing HTC phones since the HTC 4G LTE, but this thing is a different beast entirely. I've unlocked via HTC Dev, installed unofficial TWRP 3.0.3-9, flashed the custom SU, & installed Viper (did all that from stock N). Viper is definitely super solid, but I've always preferred the CM/AOSP platform. I've wiped the internal like I've done a thousand times & flashed Lineage + gapps (arm64). the phone boots & gets to the lineage boot animation & sits there indefinitely. I let it sit for almost an hour, & obviously it wasn't going to boot.
What am I missing, guys? Any & all help will be greatly appreciated.
Click to expand...
Click to collapse
They dont have any roms built for the CDMA 10, notice there are no CM or AOSP roms in the SPrint htc 10 rom section. It probably didn't boot completely cause of a kernel mismatch.

there are people in the LOS thread saying they're on Sprint running it. I just can't follow their methods, which is why I was hoping for a tut.
---------- Post added at 12:03 AM ---------- Previous post was at 12:02 AM ----------
trev23sks said:
Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.
Click to expand...
Click to collapse
i can't seem to find your instructional thread man.

King of the Couch said:
there are people in the LOS thread saying they're on Sprint running it. I just can't follow their methods, which is why I was hoping for a tut.
---------- Post added at 12:03 AM ---------- Previous post was at 12:02 AM ----------
i can't seem to find your instructional thread man.
Click to expand...
Click to collapse
The solution has been discovered by @The Fer-Shiz-Nizzle!
Flash the file in this post. You must be s-off. Works perfectly.
https://forum.xda-developers.com/showpost.php?p=71388292&postcount=1049

trev23sks said:
Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.
Click to expand...
Click to collapse
drob311 said:
The solution has been discovered by @The Fer-Shiz-Nizzle!
Flash the file in this post. You must be s-off. Works perfectly.
https://forum.xda-developers.com/showpost.php?p=71388292&postcount=1049
Click to expand...
Click to collapse
just flash that single file then install the rom/gapps? that's pretty simple..

King of the Couch said:
just flash that single file then install the rom/gapps? that's pretty simple..
Click to expand...
Click to collapse
That's all you need. Must be S-off. Rename to 2PS6IMG.zip and place on root of ext SDcard. Reboot to Download mode and accept the prompt to flash the file. Reboot back to recovery, make the proper wipes and flash ROM & Gapps. Reboot and enjoy AOSP/LOS!
Sent from my Sprint HTC 10 using Tapatalk

The Fer-Shiz-Nizzle said:
That's all you need. Must be S-off. Rename to 2PS6IMG.zip and place on root of ext SDcard. Reboot to Download mode and accept the prompt to flash the file. Reboot back to recovery, make the proper wipes and flash ROM & Gapps. Reboot and enjoy AOSP/LOS!
Click to expand...
Click to collapse
Correct. You must be S-Off to do this. Put the .zip file, named 2PS6IMG.zip, on the root of your ext sd card, reboot to bootloader and flash it. After successfully flashing that file, you'll be able to run AOSP without issue. Like you said, download and flash. Enjoy! ?

drob311 said:
Correct. You must be S-Off to do this. Put the .zip file, named 2PS6IMG.zip, on the root of your ext sd card, reboot to bootloader and flash it. After successfully flashing that file, you'll be able to run AOSP without issue. Like you said, download and flash. Enjoy!
Click to expand...
Click to collapse
I am seeing two different instruction steps in the posts and just want to be sure i got this right. Do we flash the sd card zip before or after flashing an AOSP rom and gapps? Also, is there any particular aosp rom that works best for this method?
thank you!