Related
What wireless charger do you buy for use with this phone? Thanks.
well if they ever decide to release pricing and availability information I wouldn't mind grabbing the Fatboy Wireless Charging Pillow for the new Nokia phones.
This is probably a stupid question, but presumably the wireless charging won't work if there's a case between the back of the phone and the charging unit?
Sent from my GT-I9300 using xda app-developers app
As long as the case isn't metal, it should still charge.
Since it appears Google isn't making their own, can someone list a few good wireless chargers compatible with the Nexus 4? Thanks.
just do a google for " qi charger" you'll find a few
The Palm one is compatible?
Inviato dal mio GT-I9300
Artius89 said:
The Palm one is compatible?
Inviato dal mio GT-I9300
Click to expand...
Click to collapse
Nope!
I would my best bet. The wireless charges that the iPhone use like that energizer pad?
#Galaxy Nexus HSPA+
Any QI Charger will charge the Nexus 4.
Touchstone chargers will not work.
Possibly this or the one-position variant of that product.
I have one of the Lumia 920 fatboy chargers, will that work?
I had the Nokia 900 wireless charger from Verizon and it wouldn't work correctly w/ my N4. It kept cycling from charging to not charging. I know it wasn't the chargers problem because it works fine with my dad's DNA. So not sure if I've got a faulty N4 or if the charger just isn't compatible. Anyone else try it?
I have the energizer wireless charger, while it works perfectly with my nexus 4, I must recommend against it.
The reason being the back of the nexus is glass, the surface of the charger is glossy plastic and combined with the slight angle of the charging surface, my nexus is happy to slowly slide on the charging surface.
Easy fix by putting some glad wrap on the surface, but detracts from the clean look of the charger
My 2c
Rellikzephyr
Sent from my Nexus 4 using Tapatalk 2
dbdynsty25 said:
I had the Nokia 900 wireless charger from Verizon and it wouldn't work correctly w/ my N4. It kept cycling from charging to not charging. I know it wasn't the chargers problem because it works fine with my dad's DNA. So not sure if I've got a faulty N4 or if the charger just isn't compatible. Anyone else try it?
Click to expand...
Click to collapse
Exact same problem here (charging-non charging cycle). Neither the wireless charging stand nor the wireless charger on the JVC sounddock works for me (both say they should work with qi compliant devices however)
appelflap said:
Exact same problem here (charging-non charging cycle). Neither the wireless charging stand nor the wireless charger on the JVC sounddock works for me (both say they should work with qi compliant devices however)
Click to expand...
Click to collapse
I really think its a software issue with the Nexus 4... I have the fatboy charger and sometimes its perfect and other times it doesnt work properly
I'm waiting for a Chinese qi charger...
Sent from my Nexus 7 using Tapatalk 2
I've been mulling this over, and here is where I'm at so far...
Can we develop a relatively easy / straight forward wireless charging mod for the LG G2, similar to what has been done for the Samsung Galaxy S3/4 and Note 2?
At first it doesn't seem that likely, as there's not much space behind the cover of the G2, and not being designed to be removable, is relatively hard to get off. Maybe not that hard though. Some looking around here at XDA shows several people who have removed their back covers to rough them up and get rid of the shiny plastic / tendency to collect fingerprints, so it seems taking it off / putting it back on without damaging the phone is quite possible.
The main thing then is finding a coil / receiver setup thin enough that it won't cause bulging or fitment issues, which may not be possible while retaining the "stock" back.
I suspect we may be able to get around this by using a "snap on" style hard case and some padding to maintain the over all look of the phone, effectively mounting the coil in the resulting gap where the back cover once was. This isn't my idea originally -- I've seen several people do this when using exceptionally thick aftermarket cases for the Galaxy S3, where they either removed the stock back of the phone entirely or built the Palm charging coil in to the back of the case The main issue with this sort of setup would be the area around the buttons / camera lens as it would have a space there and likely collect dust and dirt / be more likely to get damaged. If the stock back becomes available (like via ebay, say) relatively cheaply I could see some people buying a spare and modifying it relatively easy to cover this problem area, we're talking about a thin piece of plastic after all.
The only remaining issue would be getting the coil connected, then. I have yet to open the AT&T version or see a picture of one opened (all the pictures I've seen thus far have been the VZW version with the wireless charging built in) but as I understand the AT&T and T-Mobile versions likely don't include the pogo pins used to connect the charging coil for the VZW version, so we'd have to find somewhere else to connect, likely to the charging pins of the USB port as has been done for other wireless charging mods with earlier phones.
All in all this probably won't be a common mod (we're likely in solid "warranty voiding / can't easily be reversed" territory here) but I don't see any definite reason so far why it wouldn't be doable.
Would anyone else (ideally someone with more "involved" hardware modding experience -- I've just done the Palm Touchstone mod in a few Samsung GS3s) like to chime in here? Suggestions?
I love my G2 and I imagine ROM / community support is going to be great since the Nexus 5 is looking to be based off of it, but after only a week or so of ownership I'm really missing just setting the GS3 on the Touchstone at night, and while the USB port seems sturdy enough I don't like risking it every time I charge.
silent-circuit said:
I've been mulling this over, and here is where I'm at so far...
Can we develop a relatively easy / straight forward wireless charging mod for the LG G2, similar to what has been done for the Samsung Galaxy S3/4 and Note 2?
At first it doesn't seem that likely, as there's not much space behind the cover of the G2, and not being designed to be removable, is relatively hard to get off. Maybe not that hard though. Some looking around here at XDA shows several people who have removed their back covers to rough them up and get rid of the shiny plastic / tendency to collect fingerprints, so it seems taking it off / putting it back on without damaging the phone is quite possible.
The main thing then is finding a coil / receiver setup thin enough that it won't cause bulging or fitment issues, which may not be possible while retaining the "stock" back.
I suspect we may be able to get around this by using a "snap on" style hard case and some padding to maintain the over all look of the phone, effectively mounting the coil in the resulting gap where the back cover once was. This isn't my idea originally -- I've seen several people do this when using exceptionally thick aftermarket cases for the Galaxy S3, where they either removed the stock back of the phone entirely or built the Palm charging coil in to the back of the case The main issue with this sort of setup would be the area around the buttons / camera lens as it would have a space there and likely collect dust and dirt / be more likely to get damaged. If the stock back becomes available (like via ebay, say) relatively cheaply I could see some people buying a spare and modifying it relatively easy to cover this problem area, we're talking about a thin piece of plastic after all.
The only remaining issue would be getting the coil connected, then. I have yet to open the AT&T version or see a picture of one opened (all the pictures I've seen thus far have been the VZW version with the wireless charging built in) but as I understand the AT&T and T-Mobile versions likely don't include the pogo pins used to connect the charging coil for the VZW version, so we'd have to find somewhere else to connect, likely to the charging pins of the USB port as has been done for other wireless charging mods with earlier phones.
All in all this probably won't be a common mod (we're likely in solid "warranty voiding / can't easily be reversed" territory here) but I don't see any definite reason so far why it wouldn't be doable.
Would anyone else (ideally someone with more "involved" hardware modding experience -- I've just done the Palm Touchstone mod in a few Samsung GS3s) like to chime in here? Suggestions?
I love my G2 and I imagine ROM / community support is going to be great since the Nexus 5 is looking to be based off of it, but after only a week or so of ownership I'm really missing just setting the GS3 on the Touchstone at night, and while the USB port seems sturdy enough I don't like risking it every time I charge.
Click to expand...
Click to collapse
I have an Optimus G Pro, but a family member got a G2 as a gift. I have Qi, but they don't (T-Mo version). I'd be interested in helping out; just not sure they'd let me open theirs up. Are you sure it lacks the pogo pins? And, additionally, for Qi, could the patch in the G Pro be potentially helpful?
I'm surprised this hasn't gotten more momentum...
KlausWillSeeYouNow said:
I have an Optimus G Pro, but a family member got a G2 as a gift. I have Qi, but they don't (T-Mo version). I'd be interested in helping out; just not sure they'd let me open theirs up. Are you sure it lacks the pogo pins? And, additionally, for Qi, could the patch in the G Pro be potentially helpful?
I'm surprised this hasn't gotten more momentum...
Click to expand...
Click to collapse
You can compare the pins in these pictures. Notice the extra 2 contacts by the NFC contacts on the Verizon version.
http://img.tapatalk.com/d/13/09/17/uhu5a3aj.jpg
http://www.dgl.ru/FileStorage/ARTIC...L_e1cdd890c4ca25f3b1783144918deb28_(8407).jpg
and people complain about android fragmentation.
Here we have the same LG G2 and you get wireless charging on one and not on the others. You have to buy the flip case for them based on your carrier. It's rather retarded if you ask me. They should all have the wireless charging.
Not just an LG thing either.
OP, to you answer your question, this isn't possible. I run an android parts shop and we have torn down a D801, D802 and a VS980. I have a D802 myself and wanted the wireless charging ability. My technician said it wasn't possible, the wireless charging module from the VS980 has no place to connect to on a D80x board.
:crying:
The best solution I think would be to solder the coil straight to the USB charging lines, but if that isn't possible I guess you could connect the coil to a USB plug and then just connect the plug on the USB port and leave it there all the time (you'd only need to remove it when you connect the phone to the PC). You would need to find a rather small USB head (ideally one with a 90 degree angle) so it doesn't get in the way.
War-Rasta said:
The best solution I think would be to solder the coil straight to the USB charging lines, but if that isn't possible I guess you could connect the coil to a USB plug and then just connect the plug on the USB port and leave it there all the time (you'd only need to remove it when you connect the phone to the PC). You would need to find a rather small USB head (ideally one with a 90 degree angle) so it doesn't get in the way.
Click to expand...
Click to collapse
Agreed. Something like: http://www.ebay.ca/itm/Type-A-Micro...t=LH_DefaultDomain_0&var=&hash=item51b4da088d
I actually did this recently to my Verizon Galaxy Nexus. I used a Note 2 Qi Receiver pad. I took my soldering iron and melted plastic casing away to expose 5V and GND where I soldered 2 beads for connection. I then fitted the Qi Pad over the beads and adjusted for a good connection. Added Double Sided tape and applied my Incipio Feather Case. When I removed the case, the double sided tape kept the Qi Pad on the case, where I permanently installed it.
I have the actual back plate cut in half to keep the camera whole sealed, but the battery and Qi pad is exposed. I basically built myself a Qi Charging Case. Remove the case and replace the back cover with a whole one, and it's gone.
Wireless Charging WAS a requirement for my next phone and luckily only the Verizon variant had it. I saw it as fate.
But conclusion is that just because the internal case doesn't have charging leads available, doesn't mean you can't make it happen. To pour salt in the wound, the Qi Charging works fantastic on the VZW model. I use it every day.
I really hope something comes up with this. I've got the ATT D800 and came from a Nokia Lumia 920 with Qi. I still have the Nokia charger and would LOVE to go back to it. I know some people say it's not important, but those are people who have not tried it yet.
Barsky said:
and people complain about android fragmentation.
Here we have the same LG G2 and you get wireless charging on one and not on the others. You have to buy the flip case for them based on your carrier. It's rather retarded if you ask me. They should all have the wireless charging.
Not just an LG thing either.
Click to expand...
Click to collapse
If I have to choose between wireless charging and flawless GPS performance, I'll take the latter.
Sent from my LG-D801 using Tapatalk
nismology said:
If I have to choose between wireless charging and flawless GPS performance, I'll take the latter.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
My Lumia had flawless GPS and Wireless Charging. It can be done. I may break open my G2 and look around a bit...
SuperSport said:
My Lumia had flawless GPS and Wireless Charging. It can be done. I may break open my G2 and look around a bit...
Click to expand...
Click to collapse
My post was specific to the G2. There is obviously no causal link between wireless charging tech in general and spotty GPS reception but it seems to be the case here. Anecdotally, it somehow has an affect on the VZW model's ability to acquire and maintain a lock.
Sent from my LG-D801 using Tapatalk
nismology said:
My post was specific to the G2. There is obviously no causal link between wireless charging tech in general and spotty GPS reception but it seems to be the case here. Anecdotally, it somehow has an affect on the VZW model's ability to acquire and maintain a lock.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I hadn't read that yet. Sounds like they put the charging coil too close to the GPS antenna.
I've just ordered one off eBay: http://m.ebay.com/itm?itemId=261329370615
They're reasonable cheap so I figured I'd try it out and see how it performs. Not going to solder as of now though
//M
Sent from my LG-D802 using XDA Premium 4 mobile app
I have no problem with the GPS on Verizon... Acquire locks very fast as well.
anpan879 said:
You can compare the pins in these pictures. Notice the extra 2 contacts by the NFC contacts on the Verizon version.
http://img.tapatalk.com/d/13/09/17/uhu5a3aj.jpg
http://www.dgl.ru/FileStorage/ARTIC...L_e1cdd890c4ca25f3b1783144918deb28_(8407).jpg
Click to expand...
Click to collapse
My question, though, is what the circuits look like on the back side of the board. It might still have the wiring, just no holes/connector
Sent from my LG-D800 using Tapatalk
Franky_V said:
My question, though, is what the circuits look like on the back side of the board. It might still have the wiring, just no holes/connector
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I can't speak definitively, but from my experience the traces for those connections are on the same side as they're surface mounted.
I suppose not possible then....?
CCJ22 said:
I suppose not possible then....?
Click to expand...
Click to collapse
http://www.amazon.com/gp/aw/d/B00HI8JYFE
I have one now, but I haven't gotten in the charging pad to test it, yet.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
eagerly awaiting this
Has anyone with the verizon model used the wireless charging? I'm just curious how well it works. I have never had a phone that was able to do that so I have no gauge on how well the technology works.
Thanks
I got the official LG WCP-300 Qi wireless charger along with my Verizon G2 on release and it works well. The charging coils are located under the camera towards the lower half of the phone and you don't need you to find the 'sweet spot' for it to detect the charging pad. It obviously doesn't charge as quickly as plugging into the wall charger but it charges my phone from about 20% to full within 5 hours. I have the charging pad always plugged in on my nightstand next to my bed and it doesn't go anywhere. Hope this answers your question!
Edit: There's an LED on the front of the pad that glows a soft amber when not charging and turns to a bright blinking green during use. I just turn the LED away from my head at night and it doesn't bother me at all.
Yeah that helps. Does it work with a case on it? I'm thinking about just getting one that I can use at work. Leave it on my desk and just charge it as needed. It may may make things easier than having to worry about plugging it in off and on throughout the day. I probably don't need one really because the battery does last me all day, but I tend to get anxiety once the battery hits the 50% mark.
It works just fine with my LG QuickWindow case. I initially bought the charging pad for the same purpose that you want to do with it but after using it, I didn't think it would be worth it to leave at my desk at work simply due to the slower charging vs USB. If I left my phone on the pad every now and then it would only charge a few percent each time.
I'm using the anker one and it works very well with cases on. Doesn't get hot either
I'm using it with the stock gel case with no issues.
Sent from my VS980 4G using Tapatalk 4
Is it possible to get the international G2 wireless charging ?
Sent from my LG-D802 using XDA Premium 4 mobile app
I got the Tylt Vu. It works great. It sits by my bedside. Every morning my phone is at 100%.
I have the Incipio Feather case, although I'm not using it currently, but I tried it on, and put it on the Tylt Vu, and it started charging with the case on.
I have a Nokia charger with the Diztronic case.. works fine.
I had the Samsung charger tray for the Galaxy S4, they mostly worked, but you had to scoot them up pretty high in the tray to get the thing aligned.. sent them back.
Nokia has 3 coils so it kinda self aligns.
So has anyone used the wireless charging with a thicker case? I'm going to be getting a G2, but the only thing that worries me is the lack of bezel. I'm paranoid that I'm going to drop it and want to get a thicker case.
I use it daily. Nokia fatboy. charge it over night every night through my incipio feather case. charged through the Verizon TPU as well.
Sent from my VS980 4G using Tapatalk 4
just bought myself a G2, loving it so far.. (this is actually my 2nd since the first rebooted like crazy)
but wondered if it is possible to buy a VZW QI battery cover to get the QI option?.. love wireless charging...
The VZW G2 comes with Qi compatibility out of the box. You should be able to just get a charger and use it with the phone as is. Besides, the battery cover is nonremovable.
He has a D802, not the Verizon model.
as to the question, I have no idea.
Without some minor surgery and a bit of creative wiring, it ain't gonna happen...if at all...
There's a reason the VS890 has the unique narrow buttons... The coil contacts daughter board encroaches on the space occupied by the normal buttons...
cggorman said:
Without some minor surgery and a bit of creative wiring, it ain't gonna happen...if at all...
There's a reason the VS890 has the unique narrow buttons... The coil contacts daughter board encroaches on the space occupied by the normal buttons...
Click to expand...
Click to collapse
darn it!! i really really wanted QI charging.. so the only way for me to get QI charging is to actually get a hold of a VZW and cannibalize it or use it if it is at all possible in norway..
wonder if the 802 got the contacts for qi charging though? maybe an aftermarket solution will come? probably not..
The Korean variant has an SD slot in the space where VZW has the contact board. Seems like I saw some internal pics of the T-Mo, but I can't remember where and didn't turn them up with a Google search.
d802
This is the d802 there are only 2 contakts on the verizon there are 4.
So I bought this case, amazon.co.uk/Textured-Design-Protective-Leather-Holder/dp/B00HQ6SAR6/ref=sr_1_24?s=electronics&ie=UTF8&qid=1390735635&sr=1-24&keywords=lg+g2+case+ecell primarily because it replaces the need for my wallet. But I am interested in Wrieless Charging.
As I am British I have the D802 version of the LG G2, ie without a removable back or built in QI receiver. Knowing nothing of QI Charging I was wondering if a receiver would be able to charge through the case . Listing a receiver and compatible charging base would be appreciated
up
I am using an it Ian one and slim armour purchased on eBay. Slow charge though.
Sent from my LG-D802 using Tapatalk
MATTHEWLONG said:
I am using an it Ian one and slim armour purchased on eBay. Slow charge though.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
dont know how thick that case is and whether the material difference would make a diff. slow charge isnt a problem its actually good because it preserves the battery integrity over time