Hi,
Sorry if this has been covered but search is down and I am panicking! I have an i-337 ATT Galaxy S4 that was unlocked for Tmobile. I just bought it 2 days ago and tonight I rooted it via motochopper and installed TWRP.
I downloaded Liquidsmooth and Gapps and flashed them via recovery. I did a factory reset and a nandroid backup. After the flash I selected reboot, and the phone turned off like it was rebooting, but never came back on!
I did a battery pull and nothing! I also tried holding down + home + power!
I accidentally forgot to wipe cache/dalvik cache after the install.
Help! I hope this isn't a brick. I've been rooting phones for a while and haven't ran into a problem.
No response when I plug it into the computer, and no charging light (the battery probably has 95% charge)
Thanks
re: download/recovery modes
Nurmi_CEO said:
Hi,
Sorry if this has been covered but search is down and I am panicking! I have an i-337 ATT Galaxy S4 that was unlocked for Tmobile. I just bought it 2 days ago and tonight I rooted it via motochopper and installed TWRP.
I downloaded Liquidsmooth and Gapps and flashed them via recovery. I did a factory reset and a nandroid backup. After the flash I selected reboot, and the phone turned off like it was rebooting, but never came back on!
I did a battery pull and nothing! I also tried holding down + home + power!
I accidentally forgot to wipe cache/dalvik cache after the install.
Help! I hope this isn't a brick. I've been rooting phones for a while and haven't ran into a problem.
No response when I plug it into the computer, and no charging light (the battery probably has 95% charge)
Thanks
Click to expand...
Click to collapse
You were holding down the wrong buttons.
Press and hold the VOL-UP button then press and hold the POWER button until
you see tiny blue text on upper left side of screen to go into "Recovery Mode".
If you want download mode do it the same way except instead of the VOL-UP
you need to press and hold the VOL-DOWN.
Good luck with it.
Remember it;s faster to click the "THANKS" button than it takes to type "thank you"!
Misterjunky said:
You were holding down the wrong buttons.
Press and hold the VOL-UP button then press and hold the POWER button until
you see tiny blue text on upper left side of screen to go into "Recovery Mode".
If you want download mode do it the same way except instead of the VOL-UP
you need to press and hold the VOL-DOWN.
Good luck with it.
Remember it;s faster to click the "THANKS" button than it takes to type "thank you"!
Click to expand...
Click to collapse
Tried....no go still nothing
Nurmi_CEO said:
Tried....no go still nothing
Click to expand...
Click to collapse
Can you link to the specific rom you flashed. It's sounds to me like you might have flashed a bad or wrong rom.
Yes....I went to original android development and got liquidsmooth...http://goo.gl/jvdfwT. I clicked on the latest version and it's the third from the bottom . says att at the end . sorry I'm on my phone browser.
Nurmi_CEO said:
Yes....I went to original android development and got liquidsmooth...http://goo.gl/jvdfwT. I clicked on the latest version and it's the third from the bottom . says att at the end . sorry I'm on my phone browser.
Click to expand...
Click to collapse
I can't tell if the t01teatt is for your specific device. I haven't seen the t01te before. I would have expected something different. The symptoms you describe sounds like a bricked device caused by flashing a rom not for your specific device.
I assume your MDL cause you have a custom recovery.
Did you use Auto Loki recovery?
If you didn't use Auto Loki recovery did you flash the Loki doki zip ?
We need all steps you took from start to end before you rebooted your phone.
Sent from my SPH-L720 using XDA Premium 4 mobile app
the phone was bone stock locked att i337. I unlocked it via the service hidden menu on YouTube. it worked fine.
next I rooted it with the motochopper, flashed twrp with goo manager and rebooted to recovery. my first load with twrp seemed to hang up and freeze, so I pulled the battery and rebooted into twrp.
I loaded the liquidsmooth to1att and gapps to be flashed. both seemed to flash successfully, and then I hit restart. forgot to wipe cache and dalvik, planned on rebooting back into recovery to wipe/maybe reflash and wipe cache.
the phone turned off and never turned back on.
I had a T-Mobile sim card in the entire time.
thanks and please help. sending this from my crappy evo lte
Did a little searching and I think the t01te is the note ii. Check out mobiletechvideos.com. they might be able to jtag it.
after root the phone was working fine on the stock ROM.
Nurmi_CEO said:
after root the phone was working fine on the stock ROM.
Click to expand...
Click to collapse
It's the rom you flashed after that which is causing the problem. Like I said I think it was for the note II and not the i337
Yup we only have liquidsmooth 2.10. Tolteatt is not this phone. This phone is jflteatt. Your only option is JTAG as jd1639 said
Sent from my SGH-I337 using Tapatalk
rushi.1986 said:
Yup we only have liquidsmooth 2.10. Tolteatt is not this phone. This phone is jflteatt. Your only option is JTAG as jd1639 said
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
send in for repair? only option? thanks for help
Nurmi_CEO said:
send in for repair? only option? thanks for help
Click to expand...
Click to collapse
If Odin doesn't recognize it, and I think you said it doesn't, then yea I think that's your only hope. But I'd keep trying to get it into download mode and have Odin recognize it. I haven't seen a hard brick of the i337.
Use the original usb cable, the usb ports in the back of the computer, and if that doesn't work try a different computer.
The build.prop in that ROM you flashed says it is for the SAMSUNG-SGH-I317 which is the Galaxy Note II. That's why it is bricked. Make sure you don't try to flash that one again. If you do get it to come up in download mode make sure you have the correct file before trying to flash again.
Good luck!
Nurmi_CEO said:
send in for repair? only option? thanks for help
Click to expand...
Click to collapse
Well that, or if its in warranty, send it off to samsung and play dumb! Just say something like "it turned off during firmware upgrade and never turned back on"
rushi.1986 said:
Well that, or if its in warranty, send it off to samsung and play dumb! Just say something like "it turned off during firmware upgrade and never turned back on"
Click to expand...
Click to collapse
...and end up with an MF3 phone?
It's better to send it off for Jtag like JD said. If it never had the MF3 bootloader on it, there shouldn't be a problem with them putting MDL back on it (as long as there isn't a hardware issue). To me, the cost is well worth it.
scott14719 said:
...and end up with an MF3 phone?
Click to expand...
Click to collapse
Good point! I didn't think of that..
Related
I'm not a total noob, I have been rooting and installing custom roms on my Xoom and other smartphones for about 2 years now and consider myself to be knowledgeable enough to go ahead and root my new S4.
Here's what's going on.
I'm having some major problems after rooting my S4 using djrbliss' Motochopper root method.
After rooting I installed Titanium Backup and did a complete backup of the device "all user apps and system apps" to a folder on my ext. SD card.
Over the coarse of a week I began to remove some of the AT&T bloatware.
I removed AT&T Navigator, AT&T Family Map, AT&T Mobile TV and AT&T DriveMode.
I kept MyAT&T, AT&T Smart WiFi and AT&T Messages for the time being.
I like using the Samsung Messages app more than the AT&T Messages app.
So I decided to uninstall AT&T Messages this morning and that's where all my problems started.
I started getting "Unfortunately, the process com.google.process.gapps has stopped." messages constantly.
So I rebooted and I got the message that "Contacts has stopped working" and the same "Unfortunately, the process com.google.process.gapps has stopped." Upon checking my contacts sure enough I would get a "loading" circle and my contacts would never load.
I then tried to reinstall AT&T Messages using Titanium Backup. I noticed that a system app called "Contacts Storage 4.2.2" was also uninstalled. But every time I tried to reinstall any apps I would get "Titanium Backup has failed to reinstall "x" number of apps".
So reading up on androidcentral someone said to do a Factory Reset, which I did, but now things have gotten worse.
The Samsung setupwizard keeps crashing and now I'm stuck in a virtual loop and can't get back into my phone.
I then downloaded the "[FACTORY STOCK] GS4 Stock Firmware Odin Package- Original Factory ROM" from that thread in an attempt to set my phone back to stock and hope that that will fix my problems.
I followed the instructions but when I get to step 5:
"Hold Volume Down + Home + Power until your device enters Download(Odin) Mode, then press volume up."
the phone does not go into "Download(Odin) Mode". Is Odin something that has to be installed on the phone first?
The thread never states this.
Please any help would be appreciated.
Thanks
Odin mode is download mode for all intensive purposes. Odin itself is a computer program although there is a mobile version (mobile version doesn't currently work on s4)
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Mike on XDA said:
Odin mode is download mode for all intensive purposes. Odin itself is a computer program although there is a mobile version (mobile version doesn't currently work on s4)
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
So the thread "[FACTORY STOCK] GS4 Stock Firmware Odin Package- Original Factory ROM" is a bogus thread?
The tread was written for the S4.
Did you already try restoring all your user and systems apps from your tb backup?
Mhjeff301 said:
So the thread "[FACTORY STOCK] GS4 Stock Firmware Odin Package- Original Factory ROM" is a bogus thread?
The tread was written for the S4.
Click to expand...
Click to collapse
What? AdamOutler is a reputable dev with a wealth of knowledge. That is in no way a bogus thread. Mobile Odin does not work on the S4. That is an Odin application that is self inclusive on the phone with no need for the computer. From what I read it requires a custom recovery to then write the stock images. We can't do that at the moment because of the locked boot loader and chain fire needs to update the app as well.
Odin (the computer version) is what is described in the thread you mention. That requires a computer for the program and a USB cable to be hooker to your S4. Be sure to follow all directions in the thread to a "T" for this process or any for that matter
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
I hope you figure it out man... as a rule of thumb, i always disable first and then remove after i can prove to myself the phone is stable for a few days.
Have you tried just using Kies to restore the firmware? I had the same issue after doing a factory reset through the phone settings.
Here is the link to the guide on doing the Kies restore.
http://forum.xda-developers.com/showthread.php?t=1984717
If you still want to do it with Odin... To get your phone into download mode you hold down Volume Down and the Home button. Then while holding those down you press the power button until the phone vibrates and then let off only the power button.
SysAdmNj said:
Did you already try restoring all your user and systems apps from your tb backup?
Click to expand...
Click to collapse
No not all my user and system apps, just the ones I uninstalled after I rooted.
SysAdmNj said:
Did you already try restoring all your user and systems apps from your tb backup?
Click to expand...
Click to collapse
theraker007 said:
I hope you figure it out man... as a rule of thumb, i always disable first and then remove after i can prove to myself the phone is stable for a few days.
Click to expand...
Click to collapse
Yea, that's what I should've done.
Should've freezed first, then deleted.
Mike on XDA said:
What? AdamOutler is a reputable dev with a wealth of knowledge. That is in no way a bogus thread. Mobile Odin does not work on the S4. That is an Odin application that is self inclusive on the phone with no need for the computer. From what I read it requires a custom recovery to then write the stock images. We can't do that at the moment because of the locked boot loader and chain fire needs to update the app as well.
Odin (the computer version) is what is described in the thread you mention. That requires a computer for the program and a USB cable to be hooker to your S4. Be sure to follow all directions in the thread to a "T" for this process or any for that matter
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Then what is AdamOutler talking about in his thread?
He doesn't say anything about needing to have a custom recovery installed on the S4 first.
I have followed the instructions to a "T", and when I get to step 5 the phone does not go into Download(Odin) Mode.
Do I need to do step 6 before step 5?
What am I missing here?
Mhjeff301 said:
Then what is AdamOutler talking about in his thread?
He doesn't say anything about needing to have a custom recovery installed on the S4 first.
I have followed the instructions to a "T", and when I get to step 5 the phone does not go into Download(Odin) Mode.
Do I need to do step 6 before step 5?
What am I missing here?
Click to expand...
Click to collapse
You need to read what I write more carefully. I discussed mobile Odin in the top portion and explained about the recovery being necessary to use that.
The PC version of Odin does NOT require a custom recovery, unlocked boot loader or any of that good stuff.
As for steps do as he instructs. When you get to 5 and 6 where you seem to be having trouble, hold the button combo until you enter download mode, hit volume up to continue and then plug the micro USB into your phone (cable already plugged into PC before hand). Your device should be recognized by Odin
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
RandomHandle said:
Have you tried just using Kies to restore the firmware? I had the same issue after doing a factory reset through the phone settings.
Here is the link to the guide on doing the Kies restore.
http://forum.xda-developers.com/showthread.php?t=1984717
If you still want to do it with Odin... To get your phone into download mode you hold down Volume Down and the Home button. Then while holding those down you press the power button until the phone vibrates and then let off only the power button.
Click to expand...
Click to collapse
Thanks RandomHandle:
Your detailed explanation on how to hold and release the buttons was able to get me back on my feet.
The only difference is that the phone doesn't vibrate when you hold all 3 buttons down, the screen just goes black.
After it goes black I release the power button and keep holding down the volume down and home buttons, after a few seconds then the phone vibrates and then goes into downloading mode. I didn't use Kies, I stuck with Odin since I spent about an hour downloading the ROM.
Phewwww!
I was scared that I was going to have to go into the AT&T store and play dumb to try and exchange the phone.
Although the big unlock symbol and the word "Custom" underneath it would have shot me down.
:victory:
Mike on XDA said:
You need to read what I write more carefully. I discussed mobile Odin in the top portion and explained about the recovery being necessary to use that.
The PC version of Odin does NOT require a custom recovery, unlocked boot loader or any of that good stuff.
As for steps do as he instructs. When you get to 5 and 6 where you seem to be having trouble, hold the button combo until you enter download mode, hit volume up to continue and then plug the micro USB into your phone (cable already plugged into PC before hand). Your device should be recognized by Odin
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Hi Mike on XDA,
Random handle was able to help me out.
It's the way you press the 3 buttons that was hosing me.
AdamOutler needed to explain that just a little bit better.
You have to hold volume down + home + power, wait for the screen to go black, then release the power button only and keep holding down the volume down + home for about 5 seconds more, then the phone will vibrate and enter "ROM Install" mode. That's when the phone will warn you about installing custom ROM's, you then press up to proceed into "Download" mode or volume down to cancel.
Anyway after getting the S4 into "Download" mode I was able to reinstall the AT&T stock ROM and all was well.
Just a note: After re-installing the AT&T stock ROM your phone will be un-rooted again.
I have a client's Atnt galaxy s4 that will not boot up normally and will not boot into recovery also.
when i try to boot into recovery i get the blue lettering in the top left and it just sits there i have let it sit for sometime like that with no change.
this is not my first go around with flashing android devices so please even give me Dev only options if that is what you think will fix it. i feel bad because he just bought this phone 2 weeks ago and cant use it. not sure what the other guy that tried to root it did and neither does he so i am shooting in the dark so any help would be great.
I have tried flashing the stock Odin package with no luck.
Also tried Kies Firmware upgrade with no luck
Most of the custom recovery for this phone from what i read are not flashed threw odin anymore, but if i am wrong please link me and i will give it a shot.
Dose anyone have any ideas someone told me to use the .PIT file and re-partition the device and reflash the stock odin package. but i have had no luck locating the .pit file for the I337 galaxy S4 could anyone grab it from there phone and upload it for me or any ideas on how i could possibly fix this issue.
Thanks in advance
Since you already tried ODIN, why don't you try KIES.
I tried that allrdy just forgot to add it to the list updated first post
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
ok i will have him give it a try
and yes it goes into downloading mode with no issues at all.
if the os isnt hosed just download goomanager and install the recovery then download a touchwiz rom that has an extended reboot menu, you can then just boot into recovery from the OS.
C13v3r0n3 said:
if the os isnt hosed just download goomanager and install the recovery then download a touchwiz rom that has an extended reboot menu, you can then just boot into recovery from the OS.
Click to expand...
Click to collapse
The OS wont boot that is why we are having such a issue cause we have to get into the recovery to fix the phone
thanks thou
If you can get into download mode and odin it should wipe everything, it should work. Maybr its hardware?
Sent from my GT-I9505 using xda app-developers app
In addition to letting go of the power button after the vibrate, here are a couple of other things that appear to have worked for other forum members. I didn't discover any of these fixes, I just did a lot of reading and saw where others have had similar problems and found ways to solve them. That is what makes the XDA community great:
Uppercuticus said:
I've had this happen to me several times while playing around with flashing. Basically (without fail in my experience), hold power+volume up+home as you'd normally do until you see the booting recovery message and let go. It will do one of two things - boot into recovery- or - restart and vibrate-. If it restarts and vibrates, immediately hold power+volume up+home until the booting recovery message pops up again and let go. It should then boot into recovery and you shouldn't have trouble in subsequent attempts.
It took me a while to figure this out and I actually thought I had permanently bricked my phone as the phone wouldn't boot and I couldn't get into recovery. Hope this helps.
Click to expand...
Click to collapse
RiNo808 said:
Those trying to boot into recovery mode, dl quick reboot from the play store. That's what I use and it works great.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Just flash a different custom recovery tar in odin. If ur using CWM, then flash TWRP, or vice versa.
C13v3r0n3 said:
If you can get into download mode and odin it should wipe everything, it should work. Maybr its hardware?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
After using ODIN, make sure to do a software (factory reset) to get rid of any data and settings that stayed behind. The firmware packages that we have for Odin, do not wipe everything on their own.
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Thanks - was having the same problem. At last somebody explains it properly. It worked.
(Why on earth is the script on the stock recovery screen so small. You need a microscope to read it. I am going to install CWM right away....)
Cheers LJ
S4 on veriozon only boots into download mood
Im having the same problem. I can ONLY get into download mood! Everytime I go and try to reboot all it does is vibrates. I was installing a rom before and it was installed fine then it says I lost my root and turned off. Now i can't turn my phone back on. I try to the NAND erase all but that does not work. Is my phone bricked? I have Verizon BTW. Could some body please help me ASAP!
Yankeetim92 said:
Im having the same problem. I can ONLY get into download mood! Everytime I go and try to reboot all it does is vibrates. I was installing a rom before and it was installed fine then it says I lost my root and turned off. Now i can't turn my phone back on. I try to the NAND erase all but that does not work. Is my phone bricked? I have Verizon BTW. Could some body please help me ASAP!
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=2316
any luck? im having the same problem after enabling the t-mobile aws bands on my i337. i could only get into odin mode, recovery boot sits there on end and i have no access to the phone settings. ive tried the odin with stock firmware but nothing.
xBeerdroiDx said:
http://forum.xda-developers.com/forumdisplay.php?f=2316
Click to expand...
Click to collapse
you are not playing fair sir...but a good one.
TheAxman said:
you are not playing fair sir...but a good one.
Click to expand...
Click to collapse
My unrooted s4 phone gets stuck with the blue colour legend Recovery booting with any mentioned method. I am unable to enter safe mode, any ideas? been surfing google for 6hrs with no proper answer. Thanks!!
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Thanx bro, This is solve my problem.
Having allmost the same problem with my S4...
http://forum.xda-developers.com/showthread.php?t=2498285
continuation of SGH_1337 will not boot into recovery
norml said:
Just flash a different custom recovery tar in odin. If ur using CWM, then flash TWRP, or vice versa.
Click to expand...
Click to collapse
here are all the details;
Rooted ATT Galaxy S4 MK2 with Busybox. all went well until I tried to flash and boot into recovery. Installed ClockworkMod Recovery, tried to reboot into recovery...permission error. Installed Team Win Recovery, same problem.
investigated... Superuser.apk for some reason is NOT present in app directory. hmm. checked for root, have root.
installed ClockworkMod Superuser from play store... asks to update superuser... fails with signature error.
There seems to be no way to flash this phone. I have the original backup I made with ClockworkMod but restore fails with signature error.
The phone works fine, has root but I am concerned I will not be able to update to 4.4 when it's available. I am also NOT able to flash any alternative ROM. frustrating.
I see there are relatives to this issue all over xda but as far as I can tell after a weekend of trying is there's NO WAY to boot into recovery with write permissions being allowed.
I have an AT&T galaxy s4 that will not boot up. I tried to flash the ROM and install SlimBean 4.2.2 build 6. after it was installed and everything, the screen went black and will not show anything. It wont go into recovery mode and vibrates every 5 seconds whenever i power it on. i tried to flash the stock rom using odin, but that didnt work either. somebody please help!
Can you provide a link to exactly what it was you flashed?
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
i cant post outside links yet, but i used the one off of phone rebel's website. i found the link under "How To Unroot & Unbrick Samsung Galaxy S4 – Return To Stock AT&T, Sprint, T-mobile, Verizon & More!"
Firstly, why would you flash anything off an iOS website? Secondly, I meant a link to what you flashed before it bricked, not after.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
i didnt think that it was an iOS site. and im sorry, i thought you meant the other one.
this is the one i tried at first: http://forum.xda-developers.com/showthread.php?t=2292474[url]
You have the US att or Canadian?
i have US AT&T
Update: i found the link for the stock rom under http://forum.xda-developers.com/showthread.php?t=2261573
attempted to flash it using odin, but nothing has changed.
I'm unable to get into recovery mode or boot up the device. I can only go in to download mode. Any attempt to boot up the device or go in to recovery mode results in a blank screen and small vibrations every 5 seconds.
this all started after i attempted to flash SlimBean on to my US AT&T Galaxy S4.
can somebody please help me? im desperate and need assistance!
HackAttackXx said:
Update: i found the link for the stock rom under http://forum.xda-developers.com/showthread.php?t=2261573
attempted to flash it using odin, but nothing has changed.
I'm unable to get into recovery mode or boot up the device. I can only go in to download mode. Any attempt to boot up the device or go in to recovery mode results in a blank screen and small vibrations every 5 seconds.
this all started after i attempted to flash SlimBean on to my US AT&T Galaxy S4.
can somebody please help me? im desperate and need assistance!
Click to expand...
Click to collapse
If you can go to download mode you can Odin back to stock. There's tons of Odin guides. I can't link because I'm on mobile but I'm sure you can search. As long as you have download mode youre not bricked and all is fine. Just be sure to have latest Samsung drivers installed for your PC.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
It sounds like you tried to flash a ROM or Kernel that is not intended for the AT&T S4 and bricked your phone (screwed up your partitions). If so, you might want to look into JTag repair services. There is a PIT file available for the 16GB version of the phone but I wouldn't touch it if you don't know what you are doing.
Odin is working fine, and whenever i try to flash it back to stock, odin says that it passed, everythings good, etc. But then when phone reboots, it just stays at that blank screen and keeps vibrating.
And could you refer me to a guide or something on PIT files or JTAG services, please?
Exactly what he did, looks as if he flashed the incorrect kernel.
Odin is the answer.
www.mobiletechvideos.com
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
HackAttackXx said:
Odin is working fine, and whenever i try to flash it back to stock, odin says that it passed, everythings good, etc. But then when phone reboots, it just stays at that blank screen and keeps vibrating.
And could you refer me to a guide or something on PIT files or JTAG services, please?
Click to expand...
Click to collapse
pull your battery and wait a few seconds. place the battery back in and immediately press the recovery button combo (vol up + home + power. release just the power button when the device vibrates and you see the blue script in the top left corner).
if this gets you into recovery, wipe data and cache. reboot.
In Odin are you using the phone option or the pda option?
Please make sure you follow the Odin instructions exactly to the T.
Sent from my SAMSUNG-SGH-I337 using xda premium
in Odin im using the PDA option, just like all of the threads and guides said to do.
and i tried the recovery combo a few times, nothing showed up. it just kept vibrating like before
gneave secretary
I'm having the exact same problem, seems like I did something similar (i.e. install the wrong kernel). Any help/assistance would greatly be appreciated
xFierce said:
I'm having the exact same problem, seems like I did something similar (i.e. install the wrong kernel). Any help/assistance would greatly be appreciated
Click to expand...
Click to collapse
You guys need to start providing links to exactly what you flashed. How is anyone supposed to know if it really was a "wrong kernel" or if it was a seemingly correct kernel that people should stay away from?
Edit: sorry, not you HeartAttack; I know you did.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
i did earlier. i tried to flash slimbean on to mine (http://forum.xda-developers.com/showthread.php?t=2292474) which is under the AT&T GS4 section, so i thought it wouldve been compatible. i was obviously wrong.
So this is what happened to me:
I flashed the foxhound rom (link) using CWM, (Wipe data, clear cache, & clear delvik cache. It installed perfectly, but because this is not an AT&T rom, I was having wifi issues.
Rather rewiping the data, clearing all caches and reinstalling the rom and then the ktweaker kernel, I just installed the ktweaker kernel (link) that I got off from galaxys4root.com.
This was my first time using this kernel with this rom. Since it was an AOSP rom I uses this kernel because it was also AOSP.
So now I'm stuck in this cycle where my phone vibrates every 3 seconds on a blank screen. I can enter download mode and I have used odin to flash original stock firmware, but I come back to this same issue every time. As OP mentioned, I am also not able to access CWM recovery after holding down keys to enter recovery.
NOTE: I believe every time the phone vibrates (every 3 seconds), the phone itself is rebooting. Therefore I don't have enough time enter recovery.
Hello everyone,
I recently tried to flash a kernel and it seems that it was a corrupted download or something of the sorts and no whenever my phone powers on, the phone sits on a black screen and just vibrates. I have gotten into download mode and ODIN'd it with the stock image but it put me right back at the same thing. Has anyone else had this issue and if so can itt be fixed?
Thanks in advance!
It would help to know what device you have, what firmware you where on and what kernel you tried to flash
hailthethief said:
Hello everyone,
I recently tried to flash a kernel and it seems that it was a corrupted download or something of the sorts and no whenever my phone powers on, the phone sits on a black screen and just vibrates. I have gotten into download mode and ODIN'd it with the stock image but it put me right back at the same thing. Has anyone else had this issue and if so can itt be fixed?
Thanks in advance!
Click to expand...
Click to collapse
Can get into recovery?
Sent from my SAMSUNG-SGH-I727 using xda premium
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
hailthethief said:
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Does Odin say successful? Do you know what firmware you were on?
hailthethief said:
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I'm not for sure about it being hard bricked if you can still get into download mode. Did you use a jig to get into download mode becuz I think that would be the only way to get to it if it was hardbricked,if not you may be able to get the pit file and fix it
Sent from my SAMSUNG-SGH-I727 using xda premium
jd1639 said:
Does Odin say successful? Do you know what firmware you were on?
Click to expand...
Click to collapse
Odin does say successful. Can you tell me how I could find the firmware version? I odin to amdl then rooted and installed TWLite and tried to flash the KToonzes kernel when this happened.
captivated1971 said:
I'm not for sure about it being hard bricked if you can still get into download mode. Did you use a jig to get into download mode becuz I think that would be the only way to get to it if it was hardbricked
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I did not use the jig.
Sent from my SGH-I337 using xda app-developers app
hailthethief said:
Odin does say successful. Can you tell me how I could find the firmware version? I odin to amdl then rooted and installed TWLite and tried to flash the KToonzes kernel when this happened.
Click to expand...
Click to collapse
In settings, about device would show the firmware. If you odined and you were on the mdl firmware. You can't get into recovery right now? Only download mode? Did you try to flash a rom before the kernel? I assume you have an i337?
id try this again with odin least wise if it works you will have to reroot again http://forum.xda-developers.com/showthread.php?t=2261573
jd1639 said:
In settings, about device would show the firmware. If you odined and you were on the mdl firmware. You can't get into recovery right now? Only download mode? Did you try to flash a rom before the kernel? I assume you have an i337?
Click to expand...
Click to collapse
Yes. I have a hard time putting it in Download mode. I don't know if I can hit recovery. Ill try though.
hailthethief said:
Yes. I have a hard time putting it in Download mode. I don't know if I can hit recovery. Ill try though.
Click to expand...
Click to collapse
After odin says sucessful,you have to remove the battery cause it will be stuck stuck on the download screen and go into recovery and factory reset the phone and it should boot right up.I dont think your phone is hard-bricked if you was able to use odin.
Azzair113 said:
After odin says sucessful,you have to remove the battery cause it will be stuck stuck on the download screen and go into recovery and factory reset the phone and it should boot right up.I dont think your phone is hard-bricked if you was able to use odin.
Click to expand...
Click to collapse
yeah i have done the samething. i went from stock rooted and had cyanogenmod 10 successfully downloaded and running one night. The next morning i installed ktoonsez kernel 100% certain it was for my cyano and everything i was running and its 90% hard bricked. The only thing i can do is get it into odin mode. Ive also flashed my att ucuamdl file with odin to try and reset it and it has said successful. The only thing i had checked was t ime reset and reboot. So i pulled the battery to try and fire it back up and nothing happens but a black screen and a little vibration. Kind of pisses me of since im not the only one who has had this happen. So far ive still had no luck with anything about the phone. no recovery, no nothing. Anybody else know anything?
hayden55 said:
yeah i have done the samething. i went from stock rooted and had cyanogenmod 10 successfully downloaded and running one night. The next morning i installed ktoonsez kernel 100% certain it was for my cyano and everything i was running and its 90% hard bricked. The only thing i can do is get it into odin mode. Ive also flashed my att ucuamdl file with odin to try and reset it and it has said successful. The only thing i had checked was t ime reset and reboot. So i pulled the battery to try and fire it back up and nothing happens but a black screen and a little vibration. Kind of pisses me of since im not the only one who has had this happen. So far ive still had no luck with anything about the phone. no recovery, no nothing. Anybody else know anything?
Click to expand...
Click to collapse
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Azzair113 said:
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Click to expand...
Click to collapse
thanks for the reply. i will give it a shot. *Fingers Crossed*
hayden55 said:
thanks for the reply. i will give it a shot. *Fingers Crossed*
Click to expand...
Click to collapse
np hope it works
Azzair113 said:
np hope it works
Click to expand...
Click to collapse
no success. recovery just isn't there. maybe somebody should ask the kt747 guy?
hayden55 said:
no success. recovery just isn't there. maybe somebody should ask the kt747 guy?
Click to expand...
Click to collapse
What kt kernel did you install was it the aosp kt kernel or the tw kt kernel you might flashed the wrong kernel.
Azzair113 said:
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Click to expand...
Click to collapse
I just tried this with the UAMDB md5 file since thats the one that came with my phone and it didn't work. hmmmm
Azzair113 said:
What kt kernel did you install was it the aosp kt kernel or the tw kt kernel you might flashed the wrong kernel.
Click to expand...
Click to collapse
I know that you would think that it would be the newbie mistake to install an tw kernel on top of a aosp ROM, but I made 100% sure to choose the correct ROM. I know the difference between touch wiz and also.
Also, sorry to hijack the thread I just saw it and figured since we both have the same problem we might all solve it together.
Hi so my lg g2 d801 is stuck on the lg boot logo and when i try going to recovery mode (twrp) it just turns into a black screen. Any idea how to get out of this please?
and when i connect the phone to the computer it pops up all these drives for some reason. really scared don't want to think that my phone just became paperweight
CrazzyBoy265 said:
and when i connect the phone to the computer it pops up all these drives for some reason. really scared don't want to think that my phone just became paperweight
Click to expand...
Click to collapse
check this thread out. I had the same thing.http://forum.xda-developers.com/showthread.php?t=2432476
this reverts you completely back to stock. You will lose all your data but you did back up regularly, right?
(edit) you only have to hold the volume UP key while plugging in the USB on a D801 to get into download mode.
Make sure you've disconnected usb when attempting to enter recovery. Hope the silence means you've sorted it out!
mooserov said:
check this thread out. I had the same thing.http://forum.xda-developers.com/showthread.php?t=2432476
this reverts you completely back to stock. You will lose all your data but you did back up regularly, right?
(edit) you only have to hold the volume UP key while plugging in the USB on a D801 to get into download mode.
Click to expand...
Click to collapse
im confused so im fashing stock rom normally?
yep. the phone will be the same as when you took it out of the box. What did you do to get to this point?
mooserov said:
yep. the phone will be the same as when you took it out of the box. What did you do to get to this point?
Click to expand...
Click to collapse
i felt like going back to stock from (was on cm11 nightlie) so i went on flashify and for some reason i tried restoring twrp and when it rebooted it messed it up bad -.-
I am able to get into TWRP to flash a ROM. I have tried the Stock Sprint Root ZV8 and it just reboots into TWRP. I was unable to get it to work with the LG Flash Tools.
Ikyo said:
I am able to get into TWRP to flash a ROM. I have tried the Stock Sprint Root ZV8 and it just reboots into TWRP. I was unable to get it to work with the LG Flash Tools.
Click to expand...
Click to collapse
well im downloading the rom as i write this hope it works for me. Do you got the same issue as i do?
CrazzyBoy265 said:
well im downloading the rom as i write this hope it works for me. Do you got the same issue as i do?
Click to expand...
Click to collapse
You have to get your phone in DOWNLOAD mode then use the thread posted above to get back to stock
RubbleTea said:
You have to get your phone in DOWNLOAD mode then use the thread posted above to get back to stock
Click to expand...
Click to collapse
ok i pressed up and down volume key its not doing anything am i doing something wrong?
CrazzyBoy265 said:
ok i pressed up and down volume key its not doing anything am i doing something wrong?
Click to expand...
Click to collapse
You hold vol up and plug in to PC.....or hold vol down and power same time.....nothing?
RubbleTea said:
You hold vol up and plug in to PC.....or hold vol down and power same time.....nothing?
Click to expand...
Click to collapse
worked perfectly with the volume up thing im unpacking the rom right now
i followed every step but when its unpacking the it says extract file error. Any ideas?
CrazzyBoy265 said:
i followed every step but when its unpacking the it says extract file error. Any ideas?
Click to expand...
Click to collapse
If you're trying to unpack the ROM try redownloading the rom.
You're saying that you have CM installed? I had this exact problem and I had PA installed.. it was a mess. I had to sideload the original ROM because to flash with that program your build.prop has to be the original information when you received the phone or else the program will throw a "different phone model"
Do you have the LG usb drivers? Install all proper USB drivers and try to sideload an original ROM.
BTW do you have any backups? Restoring also gets you out of this mess
never mind i opened the wrong folder thanks for everything guys it worked perfectly ^.^
xxxrichievxxx said:
If you're trying to unpack the ROM try redownloading the rom.
You're saying that you have CM installed? I had this exact problem and I had PA installed.. it was a mess. I had to sideload the original ROM because to flash with that program your build.prop has to be the original information when you received the phone or else the program will throw a "different phone model"
Do you have the LG usb drivers? Install all proper USB drivers and try to sideload an original ROM.
BTW do you have any backups? Restoring also gets you out of this mess
Click to expand...
Click to collapse
It worked perfectly but i guess i have to root my phone again so i think i lost all my backups from flashify
Didn't lose my root but now I've got some screen burn in because the phone wouldn't stay off.
Sent from my LG-D800 using XDA Premium 4 mobile app
LCD screen burn in
MerlinOfLore said:
Didn't lose my root but now I've got some screen burn in because the phone wouldn't stay off.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In case you don't know, you can supposedly get rid of it by displaying an all-white screen (with display brightness turned down to preserve bulb life).
MerlinOfLore said:
Didn't lose my root but now I've got some screen burn in because the phone wouldn't stay off.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Really I found out how to turn my phone off when it was messed up I'm sorry to hear about that though
Sent from my LG-D801 using Tapatalk