Phone is stuck on lg boot and recovery mode - G2 Q&A, Help & Troubleshooting

Hi so my lg g2 d801 is stuck on the lg boot logo and when i try going to recovery mode (twrp) it just turns into a black screen. Any idea how to get out of this please?

and when i connect the phone to the computer it pops up all these drives for some reason. really scared don't want to think that my phone just became paperweight

CrazzyBoy265 said:
and when i connect the phone to the computer it pops up all these drives for some reason. really scared don't want to think that my phone just became paperweight
Click to expand...
Click to collapse
check this thread out. I had the same thing.http://forum.xda-developers.com/showthread.php?t=2432476
this reverts you completely back to stock. You will lose all your data but you did back up regularly, right?
(edit) you only have to hold the volume UP key while plugging in the USB on a D801 to get into download mode.

Make sure you've disconnected usb when attempting to enter recovery. Hope the silence means you've sorted it out!

mooserov said:
check this thread out. I had the same thing.http://forum.xda-developers.com/showthread.php?t=2432476
this reverts you completely back to stock. You will lose all your data but you did back up regularly, right?
(edit) you only have to hold the volume UP key while plugging in the USB on a D801 to get into download mode.
Click to expand...
Click to collapse
im confused so im fashing stock rom normally?

yep. the phone will be the same as when you took it out of the box. What did you do to get to this point?

mooserov said:
yep. the phone will be the same as when you took it out of the box. What did you do to get to this point?
Click to expand...
Click to collapse
i felt like going back to stock from (was on cm11 nightlie) so i went on flashify and for some reason i tried restoring twrp and when it rebooted it messed it up bad -.-

I am able to get into TWRP to flash a ROM. I have tried the Stock Sprint Root ZV8 and it just reboots into TWRP. I was unable to get it to work with the LG Flash Tools.

Ikyo said:
I am able to get into TWRP to flash a ROM. I have tried the Stock Sprint Root ZV8 and it just reboots into TWRP. I was unable to get it to work with the LG Flash Tools.
Click to expand...
Click to collapse
well im downloading the rom as i write this hope it works for me. Do you got the same issue as i do?

CrazzyBoy265 said:
well im downloading the rom as i write this hope it works for me. Do you got the same issue as i do?
Click to expand...
Click to collapse
You have to get your phone in DOWNLOAD mode then use the thread posted above to get back to stock

RubbleTea said:
You have to get your phone in DOWNLOAD mode then use the thread posted above to get back to stock
Click to expand...
Click to collapse
ok i pressed up and down volume key its not doing anything am i doing something wrong?

CrazzyBoy265 said:
ok i pressed up and down volume key its not doing anything am i doing something wrong?
Click to expand...
Click to collapse
You hold vol up and plug in to PC.....or hold vol down and power same time.....nothing?

RubbleTea said:
You hold vol up and plug in to PC.....or hold vol down and power same time.....nothing?
Click to expand...
Click to collapse
worked perfectly with the volume up thing im unpacking the rom right now

i followed every step but when its unpacking the it says extract file error. Any ideas?

CrazzyBoy265 said:
i followed every step but when its unpacking the it says extract file error. Any ideas?
Click to expand...
Click to collapse
If you're trying to unpack the ROM try redownloading the rom.
You're saying that you have CM installed? I had this exact problem and I had PA installed.. it was a mess. I had to sideload the original ROM because to flash with that program your build.prop has to be the original information when you received the phone or else the program will throw a "different phone model"
Do you have the LG usb drivers? Install all proper USB drivers and try to sideload an original ROM.
BTW do you have any backups? Restoring also gets you out of this mess

never mind i opened the wrong folder thanks for everything guys it worked perfectly ^.^

xxxrichievxxx said:
If you're trying to unpack the ROM try redownloading the rom.
You're saying that you have CM installed? I had this exact problem and I had PA installed.. it was a mess. I had to sideload the original ROM because to flash with that program your build.prop has to be the original information when you received the phone or else the program will throw a "different phone model"
Do you have the LG usb drivers? Install all proper USB drivers and try to sideload an original ROM.
BTW do you have any backups? Restoring also gets you out of this mess
Click to expand...
Click to collapse
It worked perfectly but i guess i have to root my phone again so i think i lost all my backups from flashify

Didn't lose my root but now I've got some screen burn in because the phone wouldn't stay off.
Sent from my LG-D800 using XDA Premium 4 mobile app

LCD screen burn in
MerlinOfLore said:
Didn't lose my root but now I've got some screen burn in because the phone wouldn't stay off.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In case you don't know, you can supposedly get rid of it by displaying an all-white screen (with display brightness turned down to preserve bulb life).

MerlinOfLore said:
Didn't lose my root but now I've got some screen burn in because the phone wouldn't stay off.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Really I found out how to turn my phone off when it was messed up I'm sorry to hear about that though
Sent from my LG-D801 using Tapatalk

Related

AT&T Galaxy S4 Wont Boot into Recovery

I have a client's Atnt galaxy s4 that will not boot up normally and will not boot into recovery also.
when i try to boot into recovery i get the blue lettering in the top left and it just sits there i have let it sit for sometime like that with no change.
this is not my first go around with flashing android devices so please even give me Dev only options if that is what you think will fix it. i feel bad because he just bought this phone 2 weeks ago and cant use it. not sure what the other guy that tried to root it did and neither does he so i am shooting in the dark so any help would be great.
I have tried flashing the stock Odin package with no luck.
Also tried Kies Firmware upgrade with no luck
Most of the custom recovery for this phone from what i read are not flashed threw odin anymore, but if i am wrong please link me and i will give it a shot.
Dose anyone have any ideas someone told me to use the .PIT file and re-partition the device and reflash the stock odin package. but i have had no luck locating the .pit file for the I337 galaxy S4 could anyone grab it from there phone and upload it for me or any ideas on how i could possibly fix this issue.
Thanks in advance
Since you already tried ODIN, why don't you try KIES.
I tried that allrdy just forgot to add it to the list updated first post
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
ok i will have him give it a try
and yes it goes into downloading mode with no issues at all.
if the os isnt hosed just download goomanager and install the recovery then download a touchwiz rom that has an extended reboot menu, you can then just boot into recovery from the OS.
C13v3r0n3 said:
if the os isnt hosed just download goomanager and install the recovery then download a touchwiz rom that has an extended reboot menu, you can then just boot into recovery from the OS.
Click to expand...
Click to collapse
The OS wont boot that is why we are having such a issue cause we have to get into the recovery to fix the phone
thanks thou
If you can get into download mode and odin it should wipe everything, it should work. Maybr its hardware?
Sent from my GT-I9505 using xda app-developers app
In addition to letting go of the power button after the vibrate, here are a couple of other things that appear to have worked for other forum members. I didn't discover any of these fixes, I just did a lot of reading and saw where others have had similar problems and found ways to solve them. That is what makes the XDA community great:
Uppercuticus said:
I've had this happen to me several times while playing around with flashing. Basically (without fail in my experience), hold power+volume up+home as you'd normally do until you see the booting recovery message and let go. It will do one of two things - boot into recovery- or - restart and vibrate-. If it restarts and vibrates, immediately hold power+volume up+home until the booting recovery message pops up again and let go. It should then boot into recovery and you shouldn't have trouble in subsequent attempts.
It took me a while to figure this out and I actually thought I had permanently bricked my phone as the phone wouldn't boot and I couldn't get into recovery. Hope this helps.
Click to expand...
Click to collapse
RiNo808 said:
Those trying to boot into recovery mode, dl quick reboot from the play store. That's what I use and it works great.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Just flash a different custom recovery tar in odin. If ur using CWM, then flash TWRP, or vice versa.
C13v3r0n3 said:
If you can get into download mode and odin it should wipe everything, it should work. Maybr its hardware?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
After using ODIN, make sure to do a software (factory reset) to get rid of any data and settings that stayed behind. The firmware packages that we have for Odin, do not wipe everything on their own.
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Thanks - was having the same problem. At last somebody explains it properly. It worked.
(Why on earth is the script on the stock recovery screen so small. You need a microscope to read it. I am going to install CWM right away....)
Cheers LJ
S4 on veriozon only boots into download mood
Im having the same problem. I can ONLY get into download mood! Everytime I go and try to reboot all it does is vibrates. I was installing a rom before and it was installed fine then it says I lost my root and turned off. Now i can't turn my phone back on. I try to the NAND erase all but that does not work. Is my phone bricked? I have Verizon BTW. Could some body please help me ASAP!
Yankeetim92 said:
Im having the same problem. I can ONLY get into download mood! Everytime I go and try to reboot all it does is vibrates. I was installing a rom before and it was installed fine then it says I lost my root and turned off. Now i can't turn my phone back on. I try to the NAND erase all but that does not work. Is my phone bricked? I have Verizon BTW. Could some body please help me ASAP!
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=2316
any luck? im having the same problem after enabling the t-mobile aws bands on my i337. i could only get into odin mode, recovery boot sits there on end and i have no access to the phone settings. ive tried the odin with stock firmware but nothing.
xBeerdroiDx said:
http://forum.xda-developers.com/forumdisplay.php?f=2316
Click to expand...
Click to collapse
you are not playing fair sir...but a good one.
TheAxman said:
you are not playing fair sir...but a good one.
Click to expand...
Click to collapse
My unrooted s4 phone gets stuck with the blue colour legend Recovery booting with any mentioned method. I am unable to enter safe mode, any ideas? been surfing google for 6hrs with no proper answer. Thanks!!
C13v3r0n3 said:
Copied this from another thread, guy was having same issue.
EDIT: Problem solved by scott14719. Here it is: As soon as you feel the phone vibrate, immediately let go of the power button but continue to hold the other buttons until the recovery boots, then let go of them.
Phone goes into download mode ok?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Thanx bro, This is solve my problem.
Having allmost the same problem with my S4...
http://forum.xda-developers.com/showthread.php?t=2498285
continuation of SGH_1337 will not boot into recovery
norml said:
Just flash a different custom recovery tar in odin. If ur using CWM, then flash TWRP, or vice versa.
Click to expand...
Click to collapse
here are all the details;
Rooted ATT Galaxy S4 MK2 with Busybox. all went well until I tried to flash and boot into recovery. Installed ClockworkMod Recovery, tried to reboot into recovery...permission error. Installed Team Win Recovery, same problem.
investigated... Superuser.apk for some reason is NOT present in app directory. hmm. checked for root, have root.
installed ClockworkMod Superuser from play store... asks to update superuser... fails with signature error.
There seems to be no way to flash this phone. I have the original backup I made with ClockworkMod but restore fails with signature error.
The phone works fine, has root but I am concerned I will not be able to update to 4.4 when it's available. I am also NOT able to flash any alternative ROM. frustrating.
I see there are relatives to this issue all over xda but as far as I can tell after a weekend of trying is there's NO WAY to boot into recovery with write permissions being allowed.

Hard bricked phone?

Hello everyone,
I recently tried to flash a kernel and it seems that it was a corrupted download or something of the sorts and no whenever my phone powers on, the phone sits on a black screen and just vibrates. I have gotten into download mode and ODIN'd it with the stock image but it put me right back at the same thing. Has anyone else had this issue and if so can itt be fixed?
Thanks in advance!
It would help to know what device you have, what firmware you where on and what kernel you tried to flash
hailthethief said:
Hello everyone,
I recently tried to flash a kernel and it seems that it was a corrupted download or something of the sorts and no whenever my phone powers on, the phone sits on a black screen and just vibrates. I have gotten into download mode and ODIN'd it with the stock image but it put me right back at the same thing. Has anyone else had this issue and if so can itt be fixed?
Thanks in advance!
Click to expand...
Click to collapse
Can get into recovery?
Sent from my SAMSUNG-SGH-I727 using xda premium
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
hailthethief said:
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Does Odin say successful? Do you know what firmware you were on?
hailthethief said:
I did some more reading. My phone is hard bricked. What I'm reading is that it needs to JTAG or exchanged. Thanks anyways.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
I'm not for sure about it being hard bricked if you can still get into download mode. Did you use a jig to get into download mode becuz I think that would be the only way to get to it if it was hardbricked,if not you may be able to get the pit file and fix it
Sent from my SAMSUNG-SGH-I727 using xda premium
jd1639 said:
Does Odin say successful? Do you know what firmware you were on?
Click to expand...
Click to collapse
Odin does say successful. Can you tell me how I could find the firmware version? I odin to amdl then rooted and installed TWLite and tried to flash the KToonzes kernel when this happened.
captivated1971 said:
I'm not for sure about it being hard bricked if you can still get into download mode. Did you use a jig to get into download mode becuz I think that would be the only way to get to it if it was hardbricked
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I did not use the jig.
Sent from my SGH-I337 using xda app-developers app
hailthethief said:
Odin does say successful. Can you tell me how I could find the firmware version? I odin to amdl then rooted and installed TWLite and tried to flash the KToonzes kernel when this happened.
Click to expand...
Click to collapse
In settings, about device would show the firmware. If you odined and you were on the mdl firmware. You can't get into recovery right now? Only download mode? Did you try to flash a rom before the kernel? I assume you have an i337?
id try this again with odin least wise if it works you will have to reroot again http://forum.xda-developers.com/showthread.php?t=2261573
jd1639 said:
In settings, about device would show the firmware. If you odined and you were on the mdl firmware. You can't get into recovery right now? Only download mode? Did you try to flash a rom before the kernel? I assume you have an i337?
Click to expand...
Click to collapse
Yes. I have a hard time putting it in Download mode. I don't know if I can hit recovery. Ill try though.
hailthethief said:
Yes. I have a hard time putting it in Download mode. I don't know if I can hit recovery. Ill try though.
Click to expand...
Click to collapse
After odin says sucessful,you have to remove the battery cause it will be stuck stuck on the download screen and go into recovery and factory reset the phone and it should boot right up.I dont think your phone is hard-bricked if you was able to use odin.
Azzair113 said:
After odin says sucessful,you have to remove the battery cause it will be stuck stuck on the download screen and go into recovery and factory reset the phone and it should boot right up.I dont think your phone is hard-bricked if you was able to use odin.
Click to expand...
Click to collapse
yeah i have done the samething. i went from stock rooted and had cyanogenmod 10 successfully downloaded and running one night. The next morning i installed ktoonsez kernel 100% certain it was for my cyano and everything i was running and its 90% hard bricked. The only thing i can do is get it into odin mode. Ive also flashed my att ucuamdl file with odin to try and reset it and it has said successful. The only thing i had checked was t ime reset and reboot. So i pulled the battery to try and fire it back up and nothing happens but a black screen and a little vibration. Kind of pisses me of since im not the only one who has had this happen. So far ive still had no luck with anything about the phone. no recovery, no nothing. Anybody else know anything?
hayden55 said:
yeah i have done the samething. i went from stock rooted and had cyanogenmod 10 successfully downloaded and running one night. The next morning i installed ktoonsez kernel 100% certain it was for my cyano and everything i was running and its 90% hard bricked. The only thing i can do is get it into odin mode. Ive also flashed my att ucuamdl file with odin to try and reset it and it has said successful. The only thing i had checked was t ime reset and reboot. So i pulled the battery to try and fire it back up and nothing happens but a black screen and a little vibration. Kind of pisses me of since im not the only one who has had this happen. So far ive still had no luck with anything about the phone. no recovery, no nothing. Anybody else know anything?
Click to expand...
Click to collapse
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Azzair113 said:
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Click to expand...
Click to collapse
thanks for the reply. i will give it a shot. *Fingers Crossed*
hayden55 said:
thanks for the reply. i will give it a shot. *Fingers Crossed*
Click to expand...
Click to collapse
np hope it works
Azzair113 said:
np hope it works
Click to expand...
Click to collapse
no success. recovery just isn't there. maybe somebody should ask the kt747 guy?
hayden55 said:
no success. recovery just isn't there. maybe somebody should ask the kt747 guy?
Click to expand...
Click to collapse
What kt kernel did you install was it the aosp kt kernel or the tw kt kernel you might flashed the wrong kernel.
Azzair113 said:
If you can get into odin mode flash the mdl file again but make sure you have nothing ticked such as the f rest time or auto boot.And once you done pull out your usb cord and it should still say downloading on the screen.So pull the battery and then place it back in but dont boot up go into recovery what i do to get in recovery is hold the volume up,power and home button until i see the recovery booting sign at the top left corner then i let go off the power button and hold the volume up and home button until it boots into recovery.but when you go into recovery it will download the install the mdl file so you might have to do the recovery part twice after it installs the file then factory reset your phone and it should boot right up.
Click to expand...
Click to collapse
I just tried this with the UAMDB md5 file since thats the one that came with my phone and it didn't work. hmmmm
Azzair113 said:
What kt kernel did you install was it the aosp kt kernel or the tw kt kernel you might flashed the wrong kernel.
Click to expand...
Click to collapse
I know that you would think that it would be the newbie mistake to install an tw kernel on top of a aosp ROM, but I made 100% sure to choose the correct ROM. I know the difference between touch wiz and also.
Also, sorry to hijack the thread I just saw it and figured since we both have the same problem we might all solve it together.

266829231332

Ok so I'm trying to install the latest version of cyanogenmod nightlies for D801 LG G2 and when doing so it says FAILED! this is not a D801 it's a g2??? Any help?
Twrp or cwm? And what version.
Sent from my LG-VS980 using xda app-developers app
Lawlrus said:
Twrp or cwm? And what version.
Sent from my LG-VS980 using xda app-developers app
Click to expand...
Click to collapse
TWRP 2.6.3.2
your build.prop model number doesn't seem to match the required model number in the edify script.
Sent from my LG-D802
fma965 said:
your build.prop model number doesn't seem to match the required model number in the edify script.
Sent from my LG-D802
Click to expand...
Click to collapse
What needs to be done in this case?
Gtagv said:
What needs to be done in this case?
Click to expand...
Click to collapse
I also have another question when installing a new rom and leaving my internal storage intact which takes up about 16GBs that leaves me with little room for apps and games on the newly installed rom. What can done about this?
Gtagv said:
What needs to be done in this case?
Click to expand...
Click to collapse
Funny thing is I have installed 10.2 and the nightly without any problems before and now this?
Gtagv said:
Funny thing is I have installed 10.2 and the nightly without any problems before and now this?
Click to expand...
Click to collapse
Is there a CWM recory mod for this?
Gtagv said:
Is there a CWM recory mod for this?
Click to expand...
Click to collapse
I think I have bricked my phone! My phone won't even turn on now? OMG! I plug in the usb to the computer and 30 files come asking to format the drives before they are readable!
Gtagv said:
I think I have bricked my phone! My phone won't even turn on now? OMG! I plug in the usb to the computer and 30 files come asking to format the drives before they are readable!
Click to expand...
Click to collapse
Rule 1 : Read everything, then read it all again then understand what your reading then flash
As for the "bricked" phone, people need to learn what a brick is however this guide is almost guaranteed to fix the issue for you, http://forum.xda-developers.com/showthread.php?t=2432476
fma965 said:
Rule 1 : Read everything, then read it all again then understand what your reading then flash
As for the "bricked" phone, people need to learn what a brick is however this guide is almost guaranteed to fix the issue for you, http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
My Phone won't enter download mode! it just sits in a pale blue state once plug in to the usb and computer.
Gtagv said:
My Phone won't enter download mode! it just sits in a pale blue state once plug in to the usb and computer.
Click to expand...
Click to collapse
turn off the phone, then hold volume up/down i forgot which and connect usb cable.
what is this i don't even
m4570d0n said:
what is this i don't even
Click to expand...
Click to collapse
pointless post?
fma965 said:
turn off the phone, then hold volume up/down i forgot which and connect usb cable.
Click to expand...
Click to collapse
screen pops up with ???????????????????????????????????????????????????????? and stops, it says phone is not connected to the pc please connect to the pc and try again. here is an image.\
Here's another image.
Gtagv said:
screen pops up with ???????????????????????????????????????????????????????? and stops, it says phone is not connected to the pc please connect to the pc and try again. here is an image.\
Here's another image.
Click to expand...
Click to collapse
The Phone will not come on period. Only when I plug it in to the usb on the computer does screen light come on but that's it. Nothing else. You just know it's on because there is a change in the back light from really dark to just somewhat dark.
Gtagv said:
The Phone will not come on period. Only when I plug it in to the usb on the computer does screen light come on but that's it. Nothing else. You just know it's on because there is a change in the back light from really dark to just somewhat dark.
Click to expand...
Click to collapse
I installed Rom Toolbox pro just paid for it too. Made a back up using twrp deleted my old back up tried one final time to install the new cyanongenmod nightly that didn't work so I rebooted the back I had just made and my died. I should also mention that I had just gotten my IMEI unlocked if that makes a difference.
Gtagv said:
I installed Rom Toolbox pro just paid for it too. Made a back up using twrp deleted my old back up tried one final time to install the new cyanongenmod nightly that didn't work so I rebooted the back I had just made and my died. I should also mention that I had just gotten my IMEI unlocked if that makes a difference.
Click to expand...
Click to collapse
If you can see from the images below what I am talking about! One is in a deep black state which fully off and the other is a little brighter with the USB hooked up to the pc.
m4570d0n said:
what is this i don't even
Click to expand...
Click to collapse
could you please check out the images below I have attached I can give more info if needed!
Gtagv said:
could you please check out the images below I have attached I can give more info if needed!
Click to expand...
Click to collapse
Firstly you shouldn't really triple post, secondly have you tried this? http://forum.xda-developers.com/showthread.php?t=2471370

spontaneous boot loop?

my rooted G2 with stock 4.2 suddenly quit accepting a charge and appears to be caught in a boot loop. when I have it in via usb to my laptop it (laptop) responds by recognizing 12 different devices while saying they they all need to be reformatted. when I unplug the device they go away on the laptop. when I hold power (device) the LG logo will appear then quickly disappear leaving only the very dim backlight as proof that it isn't completely dead. any ideas? thank you
one more thing, the fiddling I have been doing is xposed modules. the last one I think I activated was xblast tools (very cool sh*t by the way).
You need to flash the xposed disable zip that's automatically put on the root of the storage directory. The latest module or change you added is most likely the cause. After flashing the zip, you'll need to reinstall xposed. Remember to disable the module that caused the bootloop.
Sent from my phone using some app
You dun got ATT'ed.
They're pushing OTA's out without asking now.
http://forum.xda-developers.com/showthread.php?t=2647654
Do one thing flash the .tot file for your phone if you can get to download mod, it should bring it back to factory defaults but it will format your sdcard as well so all personal data will be gone.
Here is the link to instructions:
http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
se1988 said:
You need to flash the xposed disable zip that's automatically put on the root of the storage directory. The latest module or change you added is most likely the cause. After flashing the zip, you'll need to reinstall xposed. Remember to disable the module that caused the bootloop.
Sent from my phone using some app
Click to expand...
Click to collapse
I can flash even though I can not enter download mode?
abhinav.tella said:
Do one thing flash the .tot file for your phone if you can get to download mod, it should bring it back to factory defaults but it will format your sdcard as well so all personal data will be gone.
Here is the link to instructions:
http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
Click to expand...
Click to collapse
I cannot enter download mode I'm afraid.
khaytsus said:
You dun got ATT'ed.
They're pushing OTA's out without asking now.
http://forum.xda-developers.com/showthread.php?t=2647654
Click to expand...
Click to collapse
What exactly do you mean? I glanced at the link and either your joke went right over my head or I missed it in the lot her thread.
pollutedmuse said:
I can flash even though I can not enter download mode?
Click to expand...
Click to collapse
can't you enter recovery?
If you can't enter recovery or download mode, you have a softbrick. Search on how to solve softbrick issues. Im sorry I cant help you any further if it is a softbrick, as I am completely new to LG
se1988 said:
can't you enter recovery?
If you can't enter recovery or download mode, you have a softbrick. Search on how to solve softbrick issues. Im sorry I cant help you any further if it is a softbrick, as I am completely new to LG
Click to expand...
Click to collapse
Do you mean hard brick?
pollutedmuse said:
my rooted G2 with stock 4.2 suddenly quit accepting a charge and appears to be caught in a boot loop. when I have it in via usb to my laptop it (laptop) responds by recognizing 12 different devices while saying they they all need to be reformatted. when I unplug the device they go away on the laptop. when I hold power (device) the LG logo will appear then quickly disappear leaving only the very dim backlight as proof that it isn't completely dead. any ideas? thank you
one more thing, the fiddling I have been doing is xposed modules. the last one I think I activated was xblast tools (very cool sh*t by the way).
Click to expand...
Click to collapse
When you plug it into your computer do you see a yellowed out device in Windows device manager?
If so try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
or alternately, install the pdanet drivers.
If you can then get adb access to your device there are several paths you could take.
I used this thread (I had recovery but not twrp), as it's the least destructive - http://forum.xda-developers.com/showthread.php?t=2451696
If you can't get adb access with either single sooner or pdanet drivers, you may have to resort to this..
http://forum.xda-developers.com/show....php?t=2582142
(actually kind of sounds like fun to me)
pollutedmuse said:
Do you mean hard brick?
Click to expand...
Click to collapse
No, hard brick is when the device won't even turn on. OPs device turns on, but is stuck in limbo.
se1988 said:
No, hard brick is when the device won't even turn on. OPs device turns on, but is stuck in limbo.
Click to expand...
Click to collapse
Oh, F'n sweet! Thank good sir! I am gonna work on your advice immediately.
CxanDroid said:
When you plug it into your computer do you see a yellowed out device in Windows device manager?
If so try this - http://forum.xda-developers.com/showpost.php?p=48361867&postcount=68
or alternately, install the pdanet drivers.
If you can then get adb access to your device there are several paths you could take.
I used this thread (I had recovery but not twrp), as it's the least destructive - http://forum.xda-developers.com/showthread.php?t=2451696
If you can't get adb access with either single sooner or pdanet drivers, you may have to resort to this..
http://forum.xda-developers.com/show....php?t=2582142
(actually kind of sounds like fun to me)
Click to expand...
Click to collapse
Thank you my friend!
pollutedmuse said:
Oh, F'n sweet! Thank good sir! I am gonna work on your advice immediately.
Click to expand...
Click to collapse
Good luck!!
Sent from my phone using some app

lg g2 bircked

I was flashing the KDZ after i got stuck a boot loop and it won't go into recovery, the LG tool showed ???? for all text then it crashed and my phone powder off and now i am unable to get into download mode. when i try to go into download mode it just goes onto a blank screen and mounts drives f ~ Q on my computer.
imgur links below (can't add links yet)
/8mAeRYQ.png
/cUUhhWq.png
EDIT: I have tried everything even opening the phone to short the testing pins but nothing worked. looks like i have to get a new phone it's sad to say goodbye
vorticalbox said:
I was flashing the KDZ after i got stuck a boot loop and it won't go into recovery, the LG tool showed ???? for all text then it crashed and my phone powder off and now i am unable to get into download mode. when i try to go into download mode it just goes onto a blank screen and mounts drives f ~ Q on my computer.
imgur links below (can't add links yet)
/8mAeRYQ.png
/cUUhhWq.png
EDIT: I have tried everything even opening the phone to short the testing pins but nothing worked. looks like i have to get a new phone it's sad to say goodbye
Click to expand...
Click to collapse
WAIT, your phone can still be fixed. Use srk tools to unbrick your device. If you see multiple disk drives your phone is still revivable.
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
WAIT, your phone can still be fixed. Use srk tools to unbrick your device. If you see multiple disk drives your phone is still revivable.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I tried the tools the unbrick didn't work. the device isn't showing up like it does in the video see my second screen shot. I will try it again though.
edit: right went and did it again and I still have no download mode but I can get the recovery menu, I replaced the recovery img in the folder to tWPR to try boot it but again black screen when I try. I will try replacing the files with the .img form my current rom and see if she boots
Edit 2: I see lots of disks like above but still no download mode when connecting via USB, just about to give up on this darn phone
vorticalbox said:
I tried the tools the unbrick didn't work. the device isn't showing up like it does in the video see my second screen shot. I will try it again though.
edit: right went and did it again and I still have no download mode but I can get the recovery menu, I replaced the recovery img in the folder to tWPR to try boot it but again black screen when I try. I will try replacing the files with the .img form my current rom and see if she boots
Edit 2: I see lots of disks like above but still no download mode when connecting via USB, just about to give up on this darn phone
Click to expand...
Click to collapse
hold on what phone model do you have?
xmayhemreturnsx said:
hold on what phone model do you have?
Click to expand...
Click to collapse
I have d802, I found a different tool that worked just fine got my phone up and working now.
EDIT: ok so after getting back to stock KitKat I now can't flash custom ROM's tried flashing cloudy g3 and it went back to brick mode
What tool did you use to unbrick your phone?
fabiosilva said:
What tool did you use to unbrick your phone?
Click to expand...
Click to collapse
I used forum.xda-developers(.com)/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
I have a working phone on kit Kat and that's ok.
vorticalbox said:
I have d802, I found a different tool that worked just fine got my phone up and working now.
EDIT: ok so after getting back to stock KitKat I now can't flash custom ROM's tried flashing cloudy g3 and it went back to brick mode
Click to expand...
Click to collapse
In order to flash cloudy g3 lollipop you need to flash the KitKat baseband before you install it.
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
In order to flash cloudy g3 lollipop you need to flash the KitKat baseband before you install it.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yeah it was a late one last night spending all day trying to fix it lol thanks for the help.
xmayhemreturnsx said:
In order to flash cloudy g3 lollipop you need to flash the KitKat baseband before you install it.
Click to expand...
Click to collapse
I love you, man! So simple, and yet it solved my problem flashing CloudyG2 3.3! I tried flashing it from stock KK, and couldn't do it no matter what, until I did what you said. When reading other posts, I understood KK baseband is needed when you flash from JB. Didn't realize the same applies when you are coming from stock KK. Jeez...
Anyway, big THANK YOU! :good:
kt-Froggy said:
I love you, man! So simple, and yet it solved my problem flashing CloudyG2 3.3! I tried flashing it from stock KK, and couldn't do it no matter what, until I did what you said. When reading other posts, I understood KK baseband is needed when you flash from JB. Didn't realize the same applies when you are coming from stock KK. Jeez...
Anyway, big THANK YOU! :good:
Click to expand...
Click to collapse
No problem, I'm glad I could help.
Sent from my LG-D800 using Tapatalk

Categories

Resources