I have bricked my phone ( ticked nand erase all in Odin) and now I need a PIT file to re-partition my phone. does anyone have a PIT file for 32GB N9005?
I'm soft brick too and i'm looking pit file too ^^'
are you fix your problem dude?
samanbabah said:
I have bricked my phone ( ticked nand erase all in Odin) and now I need a PIT file to re-partition my phone. does anyone have a PIT file for 32GB N9005?
Click to expand...
Click to collapse
this pit file was leaked with an old n9005 eru rom, hope it helps
dreamteam said:
this pit file was leaked with an old n9005 eru rom, hope it helps
Click to expand...
Click to collapse
please, can you tell me if it worked and what is happening with the knox-counter after ?
thanks
samanbabah said:
I have bricked my phone ( ticked nand erase all in Odin) and now I need a PIT file to re-partition my phone. does anyone have a PIT file for 32GB N9005?
Click to expand...
Click to collapse
This theard could be help u: http://forum.xda-developers.com/showthread.php?t=2550823
This is my PIT file for firmware version: N9005XXUDMK2_N9005ITVDMK2_N9005XXUDMJ7 ITV
Dear
Need PIT file for my N9005
It stuck on samsung logo after flash ver 4.4.2
N9005XXUGNG1
Thanks
This worked for me - Thanks so much!
Zibri said:
This is my PIT file for firmware version: N9005XXUDMK2_N9005ITVDMK2_N9005XXUDMJ7 ITV
Click to expand...
Click to collapse
I thought the phone was doomed after a failed flash and no pit info, tried a few options and finally after using this file the phone was back to life and running normally again! The other pit file here kind of worked but the phone was running epically slow.
rytterbomb said:
I thought the phone was doomed after a failed flash and no pit info, tried a few options and finally after using this file the phone was back to life and running normally again! The other pit file here kind of worked but the phone was running epically slow.
Click to expand...
Click to collapse
You're welcome. "One is glad to be of service." (Bicentennial Man)
Different region firmwares PIT files are different
So Be careful
Then
EXT4 mismatch
Hidden
Catch
System
Sent from my SM-N9005 using Tapatalk
N9005 6GB
Please Help Me
I have N9005 with 6GB !!!
I try ti flash android v5
Odin Error:
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And On phone :
Volume Size is too big 4620288<4718592
ODIN: Invalid Ext4 Image
Please Help Me
Baseband Version was: N9005XXEGBNL8
hamid_mol said:
Please Help Me
I have N9005 with 6GB !!!
I try ti flash android v5
Odin Error:
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And On phone :
Volume Size is too big 4620288<4718592
ODIN: Invalid Ext4 Image
Please Help Me
Baseband Version was: N9005XXEGBNL8
Click to expand...
Click to collapse
I have the same problem. Did you solve yours?
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I need kind support note 3,32gb,pit
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 2200 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Please read the thread for pit files .
Your post means nothing to give help.
Cannot open guess its a bad file.
Related
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
vega312 said:
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
Click to expand...
Click to collapse
When flashing modem you have to choose phone.
jluiz2 said:
When flashing modem you have to choose phone.
Click to expand...
Click to collapse
Tried flashing the modem file as a Phone, got the same message as above.
Try to download the file again. Maybe it can be corruped. If you unziped, don´t do it when you try again. Flash the file as you get with odin 3.04. Hope to help you.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUAMDE_MODEM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> modem.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
vega312 said:
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
Click to expand...
Click to collapse
Check if there is kies running in the background kies should be closed completly then try
I dont have kies installed and Odin worked to install ttwr.
I dont have kies installed and Odin worked to install ttwr.
i am not too sure myself.. but dont u need to be on stock recovery to flash a a new modem.
rebel1735 said:
i am not too sure myself.. but dont u need to be on stock recovery to flash a a new modem.
Click to expand...
Click to collapse
nope
I have the same problem , tried everything on internet and end up brick my phone. +1 to this problem.
Try a different firmware maybe?, may not be compatible had an issue like that on a S2 ended up changing it and it worked
Carl Blance said:
Try a different firmware maybe?, may not be compatible had an issue like that on a S2 ended up changing it and it worked
Click to expand...
Click to collapse
The issue is , since modem is included in all odin flashable firmwares etc, there is no way to do it. I tried mobile odin, same issue, stucked at "clearing" , tried flash pit file along with stock firmware, tried flash back to original firmware that come with phone, same issue odin stucked at modem.bin. Tried untick "auto-reset" in odin, manual restart, enter download mode , flash again, does not work. Tried switching usb port, switch cable, nothing works.
Error message below :
<ID:2/006> Firmware update start..
<ID:2/006> modem.bin
<ID:2/006> NAND Write Start!!
<ID:2/006> Transmission Complete..
<ID:2/006> Now Writing.. Please wait about 2 minutes
<ID:2/006>
<ID:2/006> Receive Response from boot-loader
<ID:2/006> Complete(Write) operation failed.
Click to expand...
Click to collapse
vega312 said:
Tried flashing the modem file as a Phone, got the same message as above.
Click to expand...
Click to collapse
THANK THANKS!! i did it as you write in my SPH/L720 sprint s4. THANKS AGAIN BRO!!
---------- Post added at 07:50 AM ---------- Previous post was at 07:46 AM ----------
Thanks thanks!!!!
I cannot get a network connection as my sim card is no longer found, even replaced reader but no better. Have tried flashing modem radio firmware but no better, what can I do to get the sim card working again.
The baseband is not available as it is linked to the sim card.
thanks
couldn't flash modem but got it all backworking with my recovery. I still can't GPS. that's my only issue. can't flash back to stock so I guess GPS just won't work for me. Any chance we can get a fix for this with a cm12 rom release to make things easier? This sucks, but I do appreciate all the work that goes into it. It's my fault I can't remember directions. lol
which option u tried pnone or pda
SAME HERE!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> modem.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response from boot-loader
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
pichoD said:
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> modem.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response from boot-loader
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
may be wrong modem for right frimware or vice versa
[Problem] upgrading Note 3 N9005 to lollipop 5.0 FAIL using Odin 3.10
I've recently bought Galaxy Note 3 LTE which was on android 4.2.2 and I wanted to upgrade it to Lollipop 5.
So I followed the instructions for upgrading using Odin and everything went fine until hidden.img.ext4 where it fails.
here is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBOF1_N9005EVRGBOF1_N9005XXUGBOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1006)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> modem.bin
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Size)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
also worth mentioning, I forgot to enable USB Debugging because the tutorial page didn't mention it.
please help me go through this, I don't want to lose my new Note 3.
PIT file!!!
TrueMan500 said:
I've recently bought Galaxy Note 3 LTE which was on android 4.2.2 and I wanted to upgrade it to Lollipop 5.
So I followed the instructions for upgrading using Odin and everything went fine until hidden.img.ext4 where it fails.
here is the log:
also worth mentioning, I forgot to enable USB Debugging because the tutorial page didn't mention it.
please help me go through this, I don't want to lose my new Note 3.
Click to expand...
Click to collapse
add the ROM in ODIN
and also click PIT and select file (download from below URL) and tick Re-Partition.
Now Flash
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
Try using Odin 3.07, unchecked everything except auto reboot and f.reset time. Don't check partition if you don't have a pit file.
Did you download the firmware from sammobile.com?
Does the phone still boot?
nijom said:
add the ROM in ODIN
and also click PIT and select file (download from below URL) and tick Re-Partition.
Now Flash
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
Click to expand...
Click to collapse
worked great thanks!
audit13 said:
Try using Odin 3.07, unchecked everything except auto reboot and f.reset time. Don't check partition if you don't have a pit file.
Did you download the firmware from sammobile.com?
Does the phone still boot?
Click to expand...
Click to collapse
thanks for the fast replay! I already tried nijom solution and worked fine!
Odin Fail (Size)
nijom said:
add the ROM in ODIN
and also click PIT and select file (download from below URL) and tick Re-Partition.
Now Flash
http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
Click to expand...
Click to collapse
Hi, tried to flash N9005XXSGBQA3 - GALAXY Note3 SM-N9005 NZC New Zealand through Odin, and got a fail (size) error on a rooted International N9005. You suggest needing a PIT file to flash alongside this one.
Noob question I suspect, but are these generic or firmware specific?
Any help gratefully received
hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
P.s. I tryed to use this>>> https://forum.xda-developers.com/no...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
but did not work, still get a massage:
""mmc_write fail""
x7nofate said:
hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
Click to expand...
Click to collapse
Flash Twrp recovery via odin
In twrp Go to wipe
Wipe "system+data+cache+dalvic cache+internal storage you have to wipe 3 times or more to make sure all partations are wiped cleaned.
Then you have to download repair firmware for your specific model.
Repair firmware comes with 5 files "BL+AP+CP+CSC+PIT"
you have to extract and upload all files in odin with PIT file.
Then go to odin options and check on "nand eraseall" and "re partition"
Now boot your device into odin download mode
Now hit start and wait until finish
Then dont let phone reboot you have to boot into stock recovery and do wipe cache & factory reset then reboot.
If this method fails then there is no way to fix it unless changing logic board because your internal storage is dying thats why it shows "mmc_write fail".
You can download repair firmware from www.tsar3000.com
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
x7nofate said:
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
Try to put your phone in freezer without battery for an hour then try this method again.
Keep trying if it doesn't work then as i told you you have to replace logic board because your internal memory is dead.
Hi Guys,
I was try to flash with some rom and get error like the title.
First my s8 keep loop on starting. Spend a lot of time to fix that, so happy after go in to the rom.
How ever I have new error with the signal - No service ( circle slash)
Try again with odin on CSC but not work at all.
And now... Fail on mount efs.
I can't even flash rom anymore, even after flash rom it keep loop as the error .
I tried to research on the google, even try with the Z3X... but...
My last chance is asking help from you guys, otherwise as some guy say " samsung service asking for $300 for motherboard ... bla bla "
Help me if you can,
Many thanks,
Do you have nandroid backup or EFS backup ?
zelenko said:
Do you have nandroid backup or EFS backup ?
Click to expand...
Click to collapse
Yeah - that's promblem. I don't have it
Also living in Australia, I though problem from CSC and firmware with VAU region.
But actually not ...
So do I have anychance to do with the EFS?
try to flash latest firmware with july patches ....it should fix the problem
GoJun said:
Hi Guys,
I was try to flash with some rom and get error like the title.
First my s8 keep loop on starting. Spend a lot of time to fix that, so happy after go in to the rom.
How ever I have new error with the signal - No service ( circle slash)
Try again with odin on CSC but not work at all.
And now... Fail on mount efs.
I can't even flash rom anymore, even after flash rom it keep loop as the error .
I tried to research on the google, even try with the Z3X... but...
My last chance is asking help from you guys, otherwise as some guy say " samsung service asking for $300 for motherboard ... bla bla "
Help me if you can,
Many thanks,
Click to expand...
Click to collapse
Have you used adb before will that let u flash just the twrp package or dose it fail. and then in twrp flash youre efs backup the only other way i know is trying different official firmwares like you was.
Thank guys,
Omg one day without phone--- no internet for very long day - LOL
with the july patch now. Let see how it going.
Also I still can run to TWRP but after run the rom , it still loop stop on logo samsung.
khawarjaved said:
try to flash latest firmware with july patches ....it should fix the problem
Click to expand...
Click to collapse
Actualy, It's a Fail...
It says:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5627 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Red line: SW REV. Check Fail ( bootloader) Device 3. Binary: 2
GoJun said:
Thank guys,
Omg one day without phone--- no internet for very long day - LOL
with the july patch now. Let see how it going.
Also I still can run to TWRP but after run the rom , it still loop stop on logo samsung.
Click to expand...
Click to collapse
Hoping that I'm not spamming...
Trying to follow the youtube and got this?
[email protected] C:\platform-tools
> adb devices
List of devices attached
ce11171b8bb2ef2a05 recovery
[email protected] C:\platform-tools
> adb shell
~ # su
/sbin/sh: su: not found
~ #
Where am I wrong?
Sorry for the spam,
I just update the last thing i just do.
Now it went back to the old Adnroid Recovery... and I can't update it to the TWRP anymore...
Also can't use the adb for the flash too..
Is that my last chance is go to the Samsung store ..?
GoJun said:
Actualy, It's a Fail...
It says:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5627 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Red line: SW REV. Check Fail ( bootloader) Device 3. Binary: 2
Click to expand...
Click to collapse
It fails because you are flashing an older firmware man look for firmware with end CRF7 or something like that... Its giving error because you are flashing a firmware with older bootloader
khawarjaved said:
It fails because you are flashing an older firmware man look for firmware with end CRF7 or something like that... Its giving error because you are flashing a firmware with older bootloader
Click to expand...
Click to collapse
Thanks so much, another chance for me.
Let me try again...
So I tried with BL_G950FXXU2CRF7_CL13760092_QB18535731_REV00_user_low_ship.
And got this:
<ID:0/004> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should I keep try the other BL one?
I tried with SM-G950F_1_20180717083127_fdfqza9z56_fac\BL_G950FXXU3CRGB_CL13971786_QB18969145_REV00_user_low_ship.tar.md5
And got success.
Congratulations man... Its working good?
It can root - But no service - Can boot to the phone - keep looping... GG
If can't do anything to fix, I think i have to go to service by samsung.
Man factory reset it once.clear storage etc.
I used Odin 3.10.7 and the file T535XXU1BQC1_T535DBT1BQD1_T535XXU1BQC1_HOME.tar.md5. When the process progresses to the end I'll get an error and everything does not work anymore.
Code:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> cache.img.ext4
<ID:0/005> hidden.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
[/code}
That is from Odin.
Can someone help me here? MAybe there is a partition too small??? I got this thing gifted with a very buggy rooted Firmware. Which I wnated to get rid of.
Tried it again and now I get on the screen of the 535 the followinf error.
UDC Start
Volume SIze is too big 40960 < 307200
ODIN Invalid ext4 mage
Try with another firmware version, or use PIT file too
Where do I get a PIT file and another Firmware?
Drake008 said:
Where do I get a PIT file and another Firmware?
Click to expand...
Click to collapse
Try before with pit file. Use frija to download the firmware and pit. https://forum.xda-developers.com/t/tool-frija-samsung-firmware-downloader-checker.3910594/
Then, when you open that program, go in the 3 dots, and go to settings and there you should find an option to download pit file too. I don't remember how it's called, unfortunately. But you should find that. At the end, you will get the firmware splitted likely in 3-4 pieces with pit.
Found a newer one. Now it works. Thanks for the hint to search for a new one.