Database Users

[Q] Kernel for Hyperion.

can i flash MERRUK KERNEL in the LATEST HYPERION BUILD ?

Yes, you can, its compatible to all the custom roms. Make sure you follow the correct instructions

got something problem, after i'm restoring SYSTEM,DATA,and CACHE,when i'm gonna restore my SYSTEM it show RESTORING FAILED, i followed exactly the steps in EASIEST WAY TO INSTALL MERRUK KERNEL in GENERAL SECTION.
am i missing something ?

[Q] Confused with different Bobcat Roms?

Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question

Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.

Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.

Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well

Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed

Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles

need help with cm11

hi i want to install liquidsmooth rom 4.4.4 never flash a rom other than samsung based just a few questions
do i need a differnt kernel?
modem?
do i install gapps straight after rom
thanks in advance

carloss2013 said:
hi i want to install liquidsmooth rom 4.4.4 never flash a rom other than samsung based just a few questions
do i need a differnt kernel?
modem?
do i install gapps straight after rom
thanks in advance
Click to expand...
Click to collapse
Kernels come with the roms. No need to flash another.
Modem only if there is a random call quality bug. you can ask this in the LS4.4 Q&A thread too.
Wee you can. But as my practice, i flash the rom, boot it up, then flash gapps.
"If someone helps, never forget to hit thanks ? "

[Q] How to install Custom-Rom on Stock Android 4.0.3 Kernel 2.6.39.4+

Hey guys,
i'm currently running on stock android 4.0.3 (kernel 2.6.39.4+) and i want to install a custom rom on my device. (http://forum.xda-developers.com/iconia-a500/general/epic-wip-omnirom-4-4-4-a500-a501-v18-t2872956)
what do i have to do?
i think i have to unlock the bootloader first (http://forum.xda-developers.com/showthread.php?t=1619913)
then install a recovery (cwm 6.0.45, http://forum.xda-developers.com/showthread.php?t=2583710)
and then flash the rom via cwm (http://forum.xda-developers.com/showthread.php?t=2792022)
am i right? could you explain me, what i have to do? i dont really know where to start and what to do ...
greetings DYR0

Flash Rom and Kernel

Hello,
I want to flash this Rom: Team Radium Rom
OP recommends us to use Alucard's Kernel.
Now my question, can I flash both at one go or do I have to flash Rom first, boot, back to recovery and then flash the kernel? Or doesn't it matter?

You can flash both at once. Just make sure the flash order is rom first and then kernel.

Thanks for your help!