Can't access mass storage - 7" Kindle Fire HD General

I just installed CM10.2 but I can't find a way to access sdcard thru the computer, all that comes up is Media device,does anybody have any suggestions?

ccs2ds said:
I just installed CM10.2 but I can't find a way to access sdcard thru the computer, all that comes up is Media device,does anybody have any suggestions?
Click to expand...
Click to collapse
Turn the unit off and go into your device manager and look for the yellow triangles in the usb driver section. Right click and uninstall. Restart your computer and when it is fully booted up, plug the your tablet in via USB and let the computer install the proper driver.
Also in the settings there is an option to switch from media to MTP. You will go into settings > click on storage > click on the three dots in the upper right hand corner of screen > click on "USB computer connection" > click on MTP.

LinearEquation said:
Turn the unit off and go into your device manager and look for the yellow triangles in the usb driver section. Right click and uninstall. Restart your computer and when it is fully booted up, plug the your tablet in via USB and let the computer install the proper driver.
Also in the settings there is an option to switch from media to MTP. You will go into settings > click on storage > click on the three dots in the upper right hand corner of screen > click on "USB computer connection" > click on MTP.
Click to expand...
Click to collapse
Tried that. I got the right drivers and when it is on MTP it does not appear in My Computer. I tried fastboot mode and twrp and still nothing.

ccs2ds said:
I just installed CM10.2 but I can't find a way to access sdcard thru the computer, all that comes up is Media device,does anybody have any suggestions?
Click to expand...
Click to collapse
I can't even get my laptop to recognize it at all. It'll charge, but nothing else works.

It seems that Android needs almost two resets to be recognised(it needs to arrange internally its drivers or the hardware). Every time I've changed the ROM, immediately it isn't seen by the PC host. And then I always fall into the mistake of installing "new" drivers. Suddenly, I don't know why, all starts to work fine, usually after resetting the kindle several times....
Oh pardon, I've not read it correctly. In CM 10, if you are already inside "Storage Device" you can see the simulated sdcard as a "0" directory.

Related

Nexus 4 cannot be recognized as MTP after root

I'm running Windows 7 64bit and followed the Ultimate guide to unlock and root my Nexus 4.
Everything went well but now it looks like that Windows won't recognize my phone as a device. When I plug in the phone, the auto-play window will pop out and recognize it as Nexus 4, but there is no other options. (Normally the auto-play will ask if open folder to view files or transfer photos). I can't see my phone in device manager either.
If I turn on the USB debugging mode, I can see it in device manager but still cannot see it in My Computer. Looks like Windows can't access the SD card at all.
I tried switching to the camera mode but the problem remained. Please help.
desperate bump. can anyone help?
Maybe it's a stupid advice, but have you tried change the USB port in PC?
glancer2315 said:
desperate bump. can anyone help?
Click to expand...
Click to collapse
Plug in the phone, uninstall the drivers from Device manager, then unplug, and replug.
Colourkey said:
Maybe it's a stupid advice, but have you tried change the USB port in PC?
Click to expand...
Click to collapse
yes, i did.
abaaaabbbb63 said:
Plug in the phone, uninstall the drivers from Device manager, then unplug, and replug.
Click to expand...
Click to collapse
thanks for your advice. the problem is that, without USB debugging mode on, I can't see Nexus 4 in Device manager, even though the Windows Auto-play will say Nexus 4 connected. (Nothing in My Computer either)
With USB debugging mode on, I uninstalled the driver and Windows would try installing the driver. Now it shows up as MTP device with an exclamation mark. I tried manually update the driver (direct it to the Google SDK folder and pick the android_windowsusb.inf) but it says it does not support x64. I don't think the 64 bit driver is digitally signed.
I think I had a similar problem as yours. If you deleted the drivers while on debugging mode and reconnected after and it's showing the exclamation mark of a unknown device, try restarting your computer and plugging your phone back in.
SovereigN7 said:
I think I had a similar problem as yours. If you deleted the drivers while on debugging mode and reconnected after and it's showing the exclamation mark of a unknown device, try restarting your computer and plugging your phone back in.
Click to expand...
Click to collapse
i did and it remains the same.
Is there anyway I can know all the files names of the drivers so that I can manually delete them from system folder? When I uninstalled it from the device manager, I don't see the option "Delete the driver software for this device".
I can still see it under "adb devices" list.
I think there are some conflicts in the drivers.
Now when I connect Nexus 4 (without USB debugging mode on), it will show up in device manager under Android Device.
With USB debugging, it will then show up under Portable Devices.
However, it's supposed to work the other way around. that is (no USB debugging --> portable device; with USB debugging --> Android Device).
How can i solve this?
Have you tried manually installing the drivers before plugging in the phone, vs letting windows choose the drivers it wants to install? One option you could try is installing PDA Net on your pc. It will install reliable drivers on your pc.
i also had this same problem after flashing my first custom rom on the n4, and i also run windows 7 Ultimate x64
here is the process i use for full clean installation of device
on phone
goto SETTINGS > STORAGE > (menu) USB Computer Connection
make sure Media Device (MTP) is checked
With USB Debugging On
On your PC go to device manager
there should be 2 devices (Android Phone > Android Composite ADB Interface & Portable Devices > Nexus 4) - this is on a fully working n4 so you might only have 1 of them
Right click on each of them and click uninstall
The popup box should have another check box to delete the driver also, if this is available check it then confirm (note mine only has the box for Android Phone > Android Composite ADB Interface, but if yours has it on both then check it on both)
your computer will now ask you to restart, dont do it yet
repeat previous step for the other device if you have 2 then reboot
upon rebooting it will automatically start reinstalling drivers
by expanding the selection you should see 2 devices
Nexus 4 - Successful - Ready To Use (this is your MTP connection)
Nexus 4 - Unsuccessful - No Driver Found (this is your ADB Connection)
at this point you should be able to access internal storage however ADB will not work
go back into device manager
you should now have
Portable Devices > Nexus 4
and Other Devices > Nexus 4 (with yellow exclamation mark)
right click on the Other Devices > Nexus 4 (with yellow exclamation mark)
hit Update Driver Software
click Browse my computer for driver software
click Let Me Pick Drom a List of Device Drivers On My Computer
double click Show All Devices
click Have Disk...
click Browse
navigate to the download directory for the google usb drivers (for me this was "C:\Program Files (x86)\Android\Android-SDK\Extras\Google\Usb_Driver")
double click on the android_winusb.inf file
click OK
double click "Android Composite ADB Interface"
it will then install the driver for ADB
you should now have full access to internal storage and ADB
Alex240188 said:
i also had this same problem after flashing my first custom rom on the n4, and i also run windows 7 Ultimate x64
here is the process i use for full clean installation of device
on phone
goto SETTINGS > STORAGE > (menu) USB Computer Connection
make sure Media Device (MTP) is checked
With USB Debugging On
On your PC go to device manager
there should be 2 devices (Android Phone > Android Composite ADB Interface & Portable Devices > Nexus 4) - this is on a fully working n4 so you might only have 1 of them
Right click on each of them and click uninstall
The popup box should have another check box to delete the driver also, if this is available check it then confirm (note mine only has the box for Android Phone > Android Composite ADB Interface, but if yours has it on both then check it on both)
your computer will now ask you to restart, dont do it yet
repeat previous step for the other device if you have 2 then reboot
upon rebooting it will automatically start reinstalling drivers
by expanding the selection you should see 2 devices
Nexus 4 - Successful - Ready To Use (this is your MTP connection)
Nexus 4 - Unsuccessful - No Driver Found (this is your ADB Connection)
at this point you should be able to access internal storage however ADB will not work
go back into device manager
you should now have
Portable Devices > Nexus 4
and Other Devices > Nexus 4 (with yellow exclamation mark)
right click on the Other Devices > Nexus 4 (with yellow exclamation mark)
hit Update Driver Software
click Browse my computer for driver software
click Let Me Pick Drom a List of Device Drivers On My Computer
double click Show All Devices
click Have Disk...
click Browse
navigate to the download directory for the google usb drivers (for me this was "C:\Program Files (x86)\Android\Android-SDK\Extras\Google\Usb_Driver")
double click on the android_winusb.inf file
click OK
double click "Android Composite ADB Interface"
it will then install the driver for ADB
you should now have full access to internal storage and ADB
Click to expand...
Click to collapse
thank you for your long and detailed reply.
this is what i wanted to do, but the problem is that when I uninstall them, I don't get to see the option "delete the driver software for this device". What should I? cuz every time I plug in Windosws just tries to automatically install the driver for me.
Have you tried toggling to ptp mode then back to mtp on your phone. It's odd indeed.
The fact that you can't remove the driver is because that is the mtp one which is built in to media player. Let me give this some more thought
EDIT: You said that with USB debugging disabled your device is listed under device manager as an android device
can you check and verify exactly what it is listed as? as it should be portable device
Sent from my Nexus 4 using xda app-developers app
Alex240188 said:
Have you tried toggling to ptp mode then back to mtp on your phone. It's odd indeed.
The fact that you can't remove the driver is because that is the mtp one which is built in to media player. Let me give this some more thought
EDIT: You said that with USB debugging disabled your device is listed under device manager as an android device
can you check and verify exactly what it is listed as? as it should be portable device
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
hi under android device it shows up as Android adb device
under portable device i can it now showing up as MTP USB device with exclamation mark.
glancer2315 said:
hi under android device it shows up as Android adb device
under portable device i can it now showing up as MTP USB device with exclamation mark.
Click to expand...
Click to collapse
does adb work?
i.e. adb devices
or is USB debugging turned off at this point
Also. The one with the exclamation mark. Right click and go to properties. What does it say in device status
Alex240188 said:
does adb work?
i.e. adb devices
or is USB debugging turned off at this point
Also. The one with the exclamation mark. Right click and go to properties. What does it say in device status
Click to expand...
Click to collapse
hi, adb devices works. (will list my device when usb debugging is on)
with usb debugging off, under portable device, the device status says "This device cannot start. (Code 10)". thanks.
still looking for solutions. maybe i should try uninstalling the ADB driver, but the problem is that when i uninstall the device from the device manager I don't see the option "delete the driver software for this device", any help?
glancer2315 said:
still looking for solutions. maybe i should try uninstalling the ADB driver, but the problem is that when i uninstall the device from the device manager I don't see the option "delete the driver software for this device", any help?
Click to expand...
Click to collapse
I have this same issue I'm trying to find a fix, that's how I found your thread. Alex gave very good info make sure you go back to his posts and hit his "Thanks" button, I did it on everyone one of his posts in this thread. I'm starting to think it's a hardware issue and not a software issue, I've never had this issue on any device. When I got it new running stock 4.2.2 MTP didn't work. ADB works and PTP works, just not MTP no matter what I try. I recommend you learn to use, ADB push and pull to move your files if you don't already know how to use it (To use ADB I need to check PTP for it to work and not MTP) you might need to do the same. I will keep you posted if I find a fix.
Sent from my Nexus 10 Pimpin AOKP 4Life
I'm just getting more and more confused with this.
If Adb works then you must have an Adb driver installed for the phone. However your also stating that you get no box for uninstall driver.
With USB debugging disabled you said that it appears as an android phone rather than a portable device. This should not be.
With debugging disabled what happens if you Try to uninstall in device manager
Sent from my Nexus 4 using xda app-developers app
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
My theory still stands that you have updated the mtp driver with adb drivers. Hence why mtp doesn't work but ptp does.
The problem is getting to a position where you can uninstall the adb drivers from the mtp device and let it reinstall the proper drivers
Sent from my Nexus 4 using xda app-developers app
I plugged another Nexus 4 in, and all the drivers loaded perfectly. I then tried my Nexus 4 phone, and nothing happens. No mtp, no adb, no boot loader drivers. Its my phone. My next step is to find a zip file that I can flash via custom recovery, which will bring all the binaries and ROM back to stock. Anybody know where I can find this? I'll probably lose the custom recovery, but hopefully it will be fixed and I can flash the custom recovery again.
LG-E960

[Q] ParanoidAndroid - now PC doesn't recognize N7

Just flashed PA to try it out and now my PC doesn't recognize that the device is plugged in. USB debugging and everything is correct. What else am I missing? Thanks.
What do you see in your computer device manager?
checcles said:
Just flashed PA to try it out and now my PC doesn't recognize that the device is plugged in. USB debugging and everything is correct. What else am I missing? Thanks.
Click to expand...
Click to collapse
Settings > Storage > Touch 3 dots in top right > USB computer connection > Check "Media device (MTP)"
Username invalid said:
What do you see in your computer device manager?
Click to expand...
Click to collapse
Thanks. It showed that the drivers weren't installed (yet they were but I just did it again)
bounti said:
Settings > Storage > Touch 3 dots in top right > USB computer connection > Check "Media device (MTP)"
Click to expand...
Click to collapse
This fixed it after I reinstalled the drivers. Thanks to both of you.
ok,thanks

USB storage not showing up in windows

Anyone else with problems seeing the storage after plugging into PC? adb command works and device drivers installed. Found another forum where turning the usb from MTP to charging and back under developer options does the trick. I have a non stock ROM and seeing if fresh out of the box experiences the same thing.
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
rramey23 said:
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
Click to expand...
Click to collapse
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Kandydish said:
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Click to expand...
Click to collapse
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
rramey23 said:
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
Click to expand...
Click to collapse
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Kandydish said:
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Click to expand...
Click to collapse
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
zosimov21 said:
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
Click to expand...
Click to collapse
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Kandydish said:
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Click to expand...
Click to collapse
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
zosimov21 said:
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
Click to expand...
Click to collapse
I have downloaded them. How do I specifically choose just that file? When I go through updating the driver, it asks for a folder location.
Go to dev options, switch the USB from ptp back to mtp and it works for me
xxsashixx said:
Go to dev options, switch the USB from ptp back to mtp and it works for me
Click to expand...
Click to collapse
Tried. Keeps trying to install the MTP drivers and it won't go through.
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Kandydish said:
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Click to expand...
Click to collapse
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
bartendersimon said:
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
Click to expand...
Click to collapse
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Kandydish said:
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Click to expand...
Click to collapse
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
bartendersimon said:
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
Click to expand...
Click to collapse
Changing it from charging to MTP shows a MTP device in Manager with a yellow exclamation mark next to it. When looking into the details, it says that no drivers are installed. When I try "Updating Drivers", it says "Windows failed to install drivers. Code 28" or something along those lines. Code 28 MEANS that Windows failed to install drivers.
Thanks for nothing Microsoft.
Nexus 6p Connection to PC Issue - This Helped!
I had similar problems with PC not recognising my Device. I found http://www.technobuzz.net/install-google-nexus-6p-usb-drivers/ which helped me solve my issues.
1. Downloaded and installed the Huawei Nexus 6p drivers. This installed a Huawei Task Manager which connection to pair was still not recognisable.
2. Deleted old drivers (acer, samsung, htc) from' Device Manager'. This actually helped PC recognise my device which showed up in the Device Manager>Other Devices>Nexus 6p, also in PC interface but once moved off charging to MTP, computer didnt recognise device.
3. Downloaded and installed the adb/fastboot installer. Followed instructions till step 10. My screen didn't show anything like Andoid ADB interface, it displayed MTP file install, which I installed. Just remember to refresh in My PC interface when changing over from charging to MTP, sometimes Nexus 6p will be hidden.
4. Uninstalled the Huawie Task Manager.
This has solved my problem with PC and Device connection. The instructions given are from what I can recall of the process I went through.
Credit to Sidharth Rathore from Technobuzz for this solution.
Hope this helps.
Later.
p.s. I have a windows 10 laptop if this helps.
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I was having the same issue until I uninstalled some other debugging drivers I had installed. So I would recommend crawling through your installed apps for any other android usb drivers and uninstalling them if you still have this issue.
Working on mine right now. Found that USB 3.0 ports will not recognize device. Once plugged into a 2.0, it is recognized. Might help your issue

MTP connection, windows 10.

Hello all..
I'm havin' a lot of trouble getting windows to recognize my nexus 6p on my home pc. The ONLY way i can get it to work, is i when i restart my nexus before windows will recognize it, and if i unplug my device and plug it back in, windows dosn't recognize it again.. Nothing is happing, not on the phone nor in windows. (only charge, but nothing in swipe down and no windows sound or popup)
The funny thing is, on my laptop with windows 10, i can plug- and unplug 10 times in a row and i gets recognized every single time without me having to restart my device.
Why won't my home pc recognize it, without me havin to restart the device? I've tried on windows 7 and windows 10, same same. I've tried different drivers, guides and more, nothing seems to help.
I'm running stock MHC19I, with usb debug enable.
Sorry for my bad english, and thanks in advance.
//Tuldi.
Tuldi said:
Hello all..
I'm havin' a lot of trouble getting windows to recognize my nexus 6p on my home pc. The ONLY way i can get it to work, is i when i restart my nexus before windows will recognize it, and if i unplug my device and plug it back in, windows dosn't recognize it again.. Nothing is happing, not on the phone nor in windows. (only charge, but nothing in swipe down and no windows sound or popup)
The funny thing is, on my laptop with windows 10, i can plug- and unplug 10 times in a row and i gets recognized every single time without me having to restart my device.
Why won't my home pc recognize it, without me havin to restart the device? I've tried on windows 7 and windows 10, same same. I've tried different drivers, guides and more, nothing seems to help.
I'm running stock MHC19I, with usb debug enable.
Sorry for my bad english, and thanks in advance.
//Tuldi.
Click to expand...
Click to collapse
It is the misconfigured drivers that might be causing this issue. Not something that you would have done intentionally. But there is a rather simple fix. To start, do you have Android SDK installed on your machine?
DJBhardwaj said:
It is the misconfigured drivers that might be causing this issue. Not something that you would have done intentionally. But there is a rather simple fix. To start, do you have Android SDK installed on your machine?
Click to expand...
Click to collapse
I installed android studio but otherwise i dont think so
** Just installed android SDK manager r24.4.1
Tuldi said:
I installed android studio but otherwise i dont think so
** Just installed android SDK manager r24.4.1
Click to expand...
Click to collapse
Open the SDK manager and download Google USB drivers.
DJBhardwaj said:
Open the SDK manager and download Google USB drivers.
Click to expand...
Click to collapse
Done loading packages.
Tuldi said:
Done loading packages.
Click to expand...
Click to collapse
Connect your phone to the PC, and make sure to enable MTP.
Now, go to Control Panel > Device Manager. Do you see a triangle icon with exclamation mark on your device name?
DJBhardwaj said:
Connect your phone to the PC, and make sure to enable MTP.
Now, go to Control Panel > Device Manager. Do you see a triangle icon with exclamation mark on your device name?
Click to expand...
Click to collapse
No
See JPG. Should i uninstall everything and start over?
Tuldi said:
No
See JPG. Should i uninstall everything and start over?
Click to expand...
Click to collapse
It's weird. Anyways, right now I wouldn't ask you to redo everything.
Right-click on 'Nexus 6P', and then on 'Update Device Software'. Select 'Browse my computer for driver software'. Now, go to the SDK installation > Extras > Google, and select the drivers folder. Once you have done that, click on Next, and the drivers will reinstall.
Reboot the computer and see if it worked.
DJBhardwaj said:
It's weird. Anyways, right now I wouldn't ask you to redo everything.
Right-click on 'Nexus 6P', and then on 'Update Device Software'. Select 'Browse my computer for driver software'. Now, go to the SDK installation > Extras > Google, and select the drivers folder. Once you have done that, click on Next, and the drivers will reinstall.
Reboot the computer and see if it worked.
Click to expand...
Click to collapse
Uninstalled everything, deleted nexus + drivers and started over.. But it's the same as before
But thanks for your time!

The MTP Problem

Unable to transfer the data between computer to device.
The MTP options doesn't seem to working.
And i have installed the required drivers on the windows.
Any Solution...???
You should enable Developer Options in settings and enable 'USB debugging' for that to happen.
Regards
shrinivasanp said:
You should enable Developer Options in settings and enable 'USB debugging' for that to happen.
Regards
Click to expand...
Click to collapse
Yes i did but nothing is working for me...
PTP options works,but it only transfer photos.
Enabling MTP option do nothing on pc...
When you connect to the there will be an 'N' on the left side of the status bar, there you have to pull it down and select 'Transfer files' and you can see your phone in explorer,
Regards
shrinivasanp said:
When you connect to the there will be an 'N' on the left side of the status bar, there you have to pull it down and select 'Transfer files' and you can see your phone in explorer,
Regards
Click to expand...
Click to collapse
Thanks
I figured it out ...
It was MTP usb driver problem on pc...
Oh, I didn't know that, anyway you figured it out, regards
Omega said:
Unable to transfer the data between computer to device.
The MTP options doesn't seem to working.
And i have installed the required drivers on the windows.
Any Solution...???
Click to expand...
Click to collapse
how did you figure it out?i got the same problem
Rakibboss said:
how did you figure it out?i got the same problem
Click to expand...
Click to collapse
Well
First you have to connect your device to pc and select the MTP option.
Then on your pc go to device manager and you will see unknown device option.
So right click on it and select update from the computer and select the directory
C:/program file (×86)/realtek/NICDRV_8169/
and down choose let me pick from a list ...
Option and select android then click on MTP usb driver and install.
That's it...
Thanks!! it worked well..!!
Omega said:
Well
First you have to connect your device to pc and select the MTP option.
Then on your pc go to device manager and you will see unknown device option.
So right click on it and select update from the computer and select the directory
C:/program file (×86)/realtek/NICDRV_8169/
and down choose let me pick from a list ...
Option and select android then click on MTP usb driver and install.
That's it...
Click to expand...
Click to collapse
Omega said:
Well
First you have to connect your device to pc and select the MTP option.
Then on your pc go to device manager and you will see unknown device option.
So right click on it and select update from the computer and select the directory
C:/program file (×86)/realtek/NICDRV_8169/
and down choose let me pick from a list ...
Option and select android then click on MTP usb driver and install.
That's it...
Click to expand...
Click to collapse
are you running windows 10? i have a realtek thing on my laptop and im having issues with it detecting my Mi Mix
To solve mtp issue
Just make sure u are in none windows N version or ltsb
If u are in N version of Windows install Windows Media player
Package to add mtp protocol to windows
Maybe the media server service on your device is disabled
---------- Post added at 06:17 PM ---------- Previous post was at 06:16 PM ----------
Or the mtp host
CanadaMix said:
are you running windows 10? i have a realtek thing on my laptop and im having issues with it detecting my Mi Mix
Click to expand...
Click to collapse
Yes i am
Pls Choose appropriate version of your windows from the directory...
Please update i'm having same problem.
Omega said:
Thanks
I figured it out ...
It was MTP usb driver problem on pc...
Click to expand...
Click to collapse
So from where you download MTP drivers??
Ricky Dhiman said:
So from where you download MTP drivers??
Click to expand...
Click to collapse
You don't need one
Your realtek driver in programfile 86 directory will do the job...
Comrades,
Just to clarify this is what worked for me - I pieced the info together from this thread...
http://en.miui.com/thread-858267-1-1.html
Several people hinted at the solution in the thread, but didn't specify exactly how to do it. Here is what worked for me - but this is Android and Windows so it could be some other random setting somewhere in your phone or PC.
I enabled developer options and debugging mode with the usual magic incantation.
I connected my phone and told Windows to open folder when it connects,
On the phone I pulled down the notification screen you will see at the bottom "Android System - USB charging device". You have to use your psychic powers to know that you need to tap this notification.
When you tap it you see "Tap for more options". so...tap for more options.
A new and magic dialogue box opens up that gives a bunch of options. Top of the list, and the default option is "Charge this device". But the second option - which was a winner for me - is "Transfer files". Tap that radio button (while whispering the word "abracadabra" under your breath) and there you go!!! The folder magically appears on my File Manager.
If you think of it like one of those 1980s text adventure games it's actually rather fun.
If you think of it any other way it's a freaking pain in the arse!!!
By the way, if it doesn't work you probably thought I was joking about whispering abracadabra...I wasn't!!
I assume this is a bug that you can't just tell the phone to default to file transfer???
Cheers,
SPuD
MIA1 and Windows 10 and MTP
first adb Setup-14.3.exe from MI - Supoort download and install on windows .
On Androif 8.MIA1 developer tools- there USB Debugging ON.
There is also a entry for using USB - as Loader MTP or .. , but by pull in USB-Cable, ist is not recognized when is standing on MTP.
Ther is coming on information a info
UA ndroid system USB for ...Loading.
Type on and change in MTP Modus.

Categories

Resources