Related
Hi, after flashing some ROMs (Omega) the phone booted normally, installed some apps and rebooted. But after that, the phone stay at Samsung GalaxyS4 screen and no furhter movement... I flashed new Stock ROM via ODIN with NO errors, but again when booting, it stay at Galaxy s4 screen... Tried and flash the PIT file with the stock ROM as well, but the same.. after the flash, it strat rebooting, and stuck on the Samsung GALAXYS4... Any ideas what to do?
Boot into recovery - home/vol up/ power wipe cache, factory reset etc then look for your default firmware from sammmobile and use odin to flash.
Don't mess with pit you will just screw it up doing stuff like that.
myname70 said:
Hi, after flashing some ROMs (Omega) the phone booted normally, installed some apps and rebooted. But after that, the phone stay at Samsung GalaxyS4 screen and no furhter movement... I flashed new Stock ROM via ODIN with NO errors, but again when booting, it stay at Galaxy s4 screen... Tried and flash the PIT file with the stock ROM as well, but the same.. after the flash, it strat rebooting, and stuck on the Samsung GALAXYS4... Any ideas what to do?
Click to expand...
Click to collapse
firstly flash a new stock rom using odin without pit.. then do a factory reset in recovery
Of course I tried to do this first... But I cannot go into recovery mode. While holding the three keys, the phone vibrated, screen went black... and that is. When release the keys it starts booting but not to go into recovery.. Tried to flash the stock recovery via odin. It flashed, but again - cannot go into trecovery
myname70 said:
Of course I tried to do this first... But I cannot go into recovery mode. While holding the three keys, the phone vibrated, screen went black... and that is. When release the keys it starts booting but not to go into recovery.. Tried to flash the stock recovery via odin. It flashed, but again - cannot go into trecovery
Click to expand...
Click to collapse
Try flashing other things with Odin. Like a kernel or CWM recovery. Something might work.
After many tries, I could managed to enter the Recovery mode . It showed no mount of /data... but after Wipe it worked
I dunno what went wrong here...
1) I have GT-I9505 (SSN: -I9505GSMH). I installed Galaxy S4 toolkit
2) Reboot into download mode. Used toolkit/Odin to root phone. Boots up. See SU.
3) Reboot into download mode. Used toolkit/Odin. Flashed TWRP Recovery
4) Phone boots up normal. Reboot into TWRP recovery. Did a factory Reset. Format.
5) Installed Zip (Latest Omega 9.0 ROM), unchecked the things I didn't want to install. Completed install, no errors reported. Rebooted.
6) Phone stuck on Samsung boot screen. I left it overnight thinking sometimes it may take 15 mins to boot system after new install.
7) Woke up, battery dead. Tried to charge phone. No charging indicators when plugged in. With whatever juice I had left I booted into TWRP recovery, it starts to charge again as I see the % batter increase after 5 mins.
-=-=-=-=- Did the Following to try to repair
a) Reinstalled Omega, this time leaving alll options on. Rebooted, stuck in Samsung boot
b) Flashed Phil CWM touch recovery, did complete wipe to install new ROM. Rebooted into Phil recovery. Flashed OMEGA. Reboot, stuck in Samsung boot.
c) Rebooted into Phil recovery, installed echo ROM, rebooted. Black screen. Rebooted into Phil. This time cannot get into recovery.
d) Started panicking, used Odin flashed TWRP. Would not flash. Something displayed about PIT error. Flashed Phil again. Reboot into recovery, WORKS! (recovery only). Went back into Download mode flashed TWRP. Rebooted, also WORKS!. Did a factory wipe. During wipe there was an error. Format, factory reset, error during wipe. Flashed OMEGA. Reboot. Stuck on samsung boot loop.
e) Downloaded official Samsung kernal for i9505 thinking it was the full flash rom. Flashed with ODIN (hoping to put everything back to factory). Completed flash, phone boots. I get OMEGA ANIMATION!!! Waited for 15 mins. Stuck on Animation. Reflashed TWRP. Rebooted, installed OMEGA...again. Stuck on samsung boot screen.
-=-=-= Kinda frustrated. What did I do wrong in the beginning?
There are so many official roms for the S4 based on region. What can I do to put it back to factory again? I purchased phone in Australia @ Samsung store. I figured download the Australia ROM but there are like 5 of them 4 being network branded roms I think. THe other one XSA is unbranded?
I tried searching for help but so far nothing works.
omega ROM or any other custom ROM uses single CSC so before booting into system you must boot into stock recovery to apply CSC of that ROM, download stock recovery of that firmware the ROM was built from
after applying CSC it will work if not flash Omega 9.0 again , it will work :good::good:
arnob_xperia said:
omega ROM or any other custom ROM uses single CSC so before booting into system you must boot into stock recovery to apply CSC of that ROM, download stock recovery of that firmware the ROM was built from
after applying CSC it will work if not flash Omega 9.0 again , it will work :good::good:
Click to expand...
Click to collapse
Thanks for responding
So I take it when I did the full factory wipe and FORMAT the formatting part erased the CSC?
The steps are:
1) Find stock recovery of the original ROM OMEGA was built on. Use odin, flash that specific recovery. ( I might as well do a complete flash of the original stock firmware)
2) Use odin, replace recovery with TWRP, flash Omega this time no formatting
Reboot should be ok?
kabloomz said:
Thanks for responding
So I take it when I did the full factory wipe and FORMAT the formatting part erased the CSC?
The steps are:
1) Find stock recovery of the original ROM OMEGA was built on. Use odin, flash that specific recovery. ( I might as well do a complete flash of the original stock firmware)
2) Use odin, replace recovery with TWRP, flash Omega this time no formatting
Reboot should be ok?
Click to expand...
Click to collapse
first use CWM or TWRP or whatever you want and format everthing
flash a fresh firmware(latest i prefer)
then flash stock recovery via odin of the built version what v9 was used, simply reboot to recovery and it will say MULTI CSC APPLIED from fresh frimware you used
then flash TWRP/CWM and flash v9
again simply reboot to recovery and it will say MULTI CSC APPLIED from V9
it will reboot, you must need to apply CSC to boot your phone
I can confirm this!
I was trying to flash Omega 9 on top of jamal's 4.3 and my phone always booted to recovery. So I restored my stock touchwiz (no custom recovery or even root) nandroid backup and applied Omega 9: it worked!
douglascamata said:
I was trying to flash Omega 9 on top of jamal's 4.3 and my phone always booted to recovery. So I restored my stock touchwiz (no custom recovery or even root) nandroid backup and applied Omega 9: it worked!
Click to expand...
Click to collapse
thats right stock recovery boot is needed to apply CSC
problem
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
macoy_412 said:
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
Click to expand...
Click to collapse
Do you have an IMEI showing on your phone? What recovery did you use to flash Omega?
It matters, because some recoveries will screw it up.
Do you try to install with Philz recovery?
Sent from my GT-I9505 using xda premium
macoy_412 said:
I need help. I am on stock build i9505XXUBMG5. then I rooted it using CF-autoroot. and i used the 1.85 version of ODIN. (Does the version of ODIN affect how the phone is rooted?) Anyways, After that, it is rooted. then after some time, my Wifi is not working or not turning on. I checked google and found the *#0011# method and turned off the Wifi power saving. Then, at first, it worked. After a while, the problem insists. but randomly turns on. I observed that in the *#0011# -> wifi window, the state is power off. but when it is completely not turning on, the state is now disconnected. How can I fix this?
I tried flashing Omega ROM, because there was a wifi fix on that ROM. But when I finished flashing it and continue to reboot, it's stuck on the boot animation. It is not even the Omega robot animation, just the original animation. (Another problem) i tried wiping cache, delvik cache and data but nothing happens.
Click to expand...
Click to collapse
At this point I think it is the CSC issue arnob-xperia mentioned.
This is how I corrected my issue.
1) Omega v10 uses newer base FW. In their description it tells u. (ex: ver 9 uses XUBMG5). Search on the i9505 forums here. I can't link for some reason I can't see any of the stickied threads, especially the one listing all avail stock firmwares.
Flash into Philz or TWRP do a complete wipe of everything including data. etc.
You MUST download the full firmware, Not just the smaller kernel and recovery or csc. The full stock fw is usually over 1.6 GB. Anything around that range and u got the right one for Odin flash with the md5. Use Odin to flash. I used 1.85 and it was fine.
2) Once done it will reboot and in theory you are stock everything. At this point, for me somehow the phone got stuck in fricken boot loop. I pulled out battery, reboot into stock recovery and made sure I saw the multicsc. Rebooted. Still boot loop.
After hours of doing all sorts of things and putting the phone aside for a day. Came back, flashed the stock fw again using Odin. Reboot into recovery. Check the multi csc. Reboot. Stuck in boot loop. Reboot to download mode. Then I decided to ROOT the phone for ****s and giggles. This worked!
Phone booted.
3) Now you have stock (for that specific OMEGA fw) w/ the matching CSC. From here on follow OMEGA flash instructions for the specific things it tells u to wipe. DO NOT DO A FULL WIPE/FORMAT like I did (what got me in the mess to begin with).
** For Galaxy S3s, S4s, for some reason I've always had problems with TWRP. I had better luck using Philz. Everyone's personal experience varies on this one.
** I think the problem has to do with the CSC which handles specific region phone and carrier modes. This doesn't mean that it won't work if you use a diff region CSC. Just that it has to match the FW base you are using otherwise you have all sorts of problems. After that you can go in android and setup your APNs etc if you have probs with data. I didn't have this problem and was testing using the UK fw base on AU network sim.
*** Why does Samsung make things so damn complicated. I remember way back in 2k3 using fricken ODIN (samsung flashing utitility) to flash **** and it was the same setup as now. This whole crap about CSC pairing is a bit annoying. It is bad enough there are 6+ variations of S4s lol...
Hope this helps.
wifi problem
kabloomz said:
At this point I think it is the CSC issue arnob-xperia mentioned.
This is how I corrected my issue.
1) Omega v10 uses newer base FW. In their description it tells u. (ex: ver 9 uses XUBMG5). Search on the i9505 forums here. I can't link for some reason I can't see any of the stickied threads, especially the one listing all avail stock firmwares.
Flash into Philz or TWRP do a complete wipe of everything including data. etc.
You MUST download the full firmware, Not just the smaller kernel and recovery or csc. The full stock fw is usually over 1.6 GB. Anything around that range and u got the right one for Odin flash with the md5. Use Odin to flash. I used 1.85 and it was fine.
2) Once done it will reboot and in theory you are stock everything. At this point, for me somehow the phone got stuck in fricken boot loop. I pulled out battery, reboot into stock recovery and made sure I saw the multicsc. Rebooted. Still boot loop.
After hours of doing all sorts of things and putting the phone aside for a day. Came back, flashed the stock fw again using Odin. Reboot into recovery. Check the multi csc. Reboot. Stuck in boot loop. Reboot to download mode. Then I decided to ROOT the phone for ****s and giggles. This worked!
Phone booted.
3) Now you have stock (for that specific OMEGA fw) w/ the matching CSC. From here on follow OMEGA flash instructions for the specific things it tells u to wipe. DO NOT DO A FULL WIPE/FORMAT like I did (what got me in the mess to begin with).
** For Galaxy S3s, S4s, for some reason I've always had problems with TWRP. I had better luck using Philz. Everyone's personal experience varies on this one.
** I think the problem has to do with the CSC which handles specific region phone and carrier modes. This doesn't mean that it won't work if you use a diff region CSC. Just that it has to match the FW base you are using otherwise you have all sorts of problems. After that you can go in android and setup your APNs etc if you have probs with data. I didn't have this problem and was testing using the UK fw base on AU network sim.
*** Why does Samsung make things so damn complicated. I remember way back in 2k3 using fricken ODIN (samsung flashing utitility) to flash **** and it was the same setup as now. This whole crap about CSC pairing is a bit annoying. It is bad enough there are 6+ variations of S4s lol...
Hope this helps.
Click to expand...
Click to collapse
I did flash the Omega v9.1 and applied the wifi fix but the wifi is still broken. I tried unrooting it by flashing the original rom and formatting the data but the wifi is still broken. I can't turn it on. Thanks for the instructions anyways. ))
no pit partition
also, when i tried to root it again, it fails and says there is no PIT partition..
Where is the csc in TWRP so I can so what ones on the phone..??
What stock firmware can I use for a Orange Network in the UK.
GT-i9505 stuck on boot when upgraded from omega v16 to v21
Hello guys,
Well, I followed all the instructions and flashed new bootloader and new modem and after that I installed omega v21 with Full swipe. After that I ended up stuck in boot animation. :s What to do? I already tried to re-flash modem and bootloader, updated CWM and tried to re-install that v21 and after that I flashed twrp over cwm and tried to re-install v21 but always I ended up stuck in that boot animation. :S All installs were successful, but it just wont boot.
What to do?
Hopefully you understand my problem.
Cheers from Finland!
Nico
EDIT:
Ok, I flashed omega rom v19 with full wipe and tried to boot. Didnt work, but then I installed Kies to my computer, opened Kies, Plugged USB in and started my phone and then Kaboom! It booted. What exactly happened there?
BizK1d said:
Hello guys,
Well, I followed all the instructions and flashed new bootloader and new modem and after that I installed omega v21 with Full swipe. After that I ended up stuck in boot animation. :s What to do? I already tried to re-flash modem and bootloader, updated CWM and tried to re-install that v21 and after that I flashed twrp over cwm and tried to re-install v21 but always I ended up stuck in that boot animation. :S All installs were successful, but it just wont boot.
What to do?
Hopefully you understand my problem.
Cheers from Finland!
Nico
EDIT:
Ok, I flashed omega rom v19 with full wipe and tried to boot. Didnt work, but then I installed Kies to my computer, opened Kies, Plugged USB in and started my phone and then Kaboom! It booted. What exactly happened there?
Click to expand...
Click to collapse
Hi, I am having the same problem. First I installed the new firmware (NA5) and modem, tested it with the Omega ROM v21 and boot caught on so now tested the rom Fox Hound 4.1 and am having the same problem.
Kies tested this option but have not had the same luck as you. = /
Anyone know the reason? The rom Google Edition Jamal runs on my phone.
i9505
Hi, need a stock MJ5 kernel flashable with odin to save my GT-I9505, stuck at splash screen with no recovery. Been flashing with odin and Kies for the last 4 days without any luck. I ve downloaded one which says MJ5 stock kernel but when i unzip it its MJ3. Thanks
Why not just flash a rom with MJ5 in it?
Or just flash a recovery and do a wipe. Then flash the rom you want.
ndmuni said:
Hi, need a stock MJ5 kernel flashable with odin to save my GT-I9505, stuck at splash screen with no recovery. Been flashing with odin and Kies for the last 4 days without any luck. I ve downloaded one which says MJ5 stock kernel but when i unzip it its MJ3. Thanks
Click to expand...
Click to collapse
Here you go. Courtesy of DJEMBEY
http://www.androidfilehost.com/?fid=23156208500214287
Obagleyfreer said:
Here you go. Courtesy of DJEMBEY
http://www.androidfilehost.com/?fid=23156208500214287
Click to expand...
Click to collapse
Thanks, Been flashing last 4 days, stock with odin both rom n recovery n also using kies firmware upgrading, both done successfully but phone just reboot into "recovery booting"n stays there, saw a lot of post here in xda n elsewhere but no one seems to ve found any solution, btw my phone is not rooted. took it out of my pocket last week saw phone was off where i powered it just stays on splash screen will go to download mode but not recovery. Also have a galaxy w same condition. Everybody seems to think that if phone is able to boot to download mode phone is not bricked, i beg to differ. I ve a few HTC phone never have so much problem as Samsung, my Note 2 suffered SDS:crying:. No more Samsung phones. Thanks guys
Flash the kernel still no help.
ndmuni said:
Thanks, Been flashing last 4 days, stock with odin both rom n recovery n also using kies firmware upgrading, both done successfully but phone just reboot into "recovery booting"n stays there, saw a lot of post here in xda n elsewhere but no one seems to ve found any solution, btw my phone is not rooted. took it out of my pocket last week saw phone was off where i powered it just stays on splash screen will go to download mode but not recovery. Also have a galaxy w same condition. Everybody seems to think that if phone is able to boot to download mode phone is not bricked, i beg to differ. I ve a few HTC phone never have so much problem as Samsung, my Note 2 suffered SDS:crying:. No more Samsung phones. Thanks guys
Flash the kernel still no help.
Click to expand...
Click to collapse
If I were in this situation I would flash a custom recovery (Philz) and if you can boot into that recovery, I would format System, Data, Cache and SD card.
Now you have a totally clean slate to flash Stock ROM in Odin. The thing is Odin flashing is a no wipe procedure, so if you have something corrupt or causing issues on your phone it'll still be there after Odin flash regardless of firmware.
You can find the .Tar file of Philz recovery in his thread, flash that in PDA of Odin and try to boot to recovery again. Make sure auto reboot is NOT ticked and your phone is totally powered off. Then using Volume up+Power try again to boot to recovery, as soon as you see the blue writing "recovery booting" release power button but keep holding down Volume UP.
So what you are saying:
- You can't boot, it stays at the Samsung logo.
- You can't enter recovery, it just boots again.
- You can enter download mode.
- Flashing is succesfull.
Am I correct? Then my first guess would be that you have a faulty battery. Look if its more swollen than normal.
Lennyz1988 said:
Why not just flash a rom with MJ5 in it?
Or just flash a recovery and do a wipe. Then flash the rom you want.
Click to expand...
Click to collapse
Obagleyfreer said:
If I were in this situation I would flash a custom recovery (Philz) and if you can boot into that recovery, I would format System, Data, Cache and SD card.
Now you have a totally clean slate to flash Stock ROM in Odin. The thing is Odin flashing is a no wipe procedure, so if you have something corrupt or causing issues on your phone it'll still be there after Odin flash regardless of firmware.
You can find the .Tar file of Philz recovery in his thread, flash that in PDA of Odin and try to boot to recovery again. Make sure auto reboot is NOT ticked and your phone is totally powered off. Then using Volume up+Power try again to boot to recovery, as soon as you see the blue writing "recovery booting" release power button but keep holding down Volume UP.
Click to expand...
Click to collapse
Thought of it but i don't wanna trigger the flag (Knox) as my phone is still under warranty.
Tested with my Galaxy W (same condition with S4) everything i flash with odin is successful but phone boot up in same condition. That's why i just wanna try with stock for S4.
Lennyz1988 said:
So what you are saying:
- You can't boot, it stays at the Samsung logo.
- You can't enter recovery, it just boots again.
- You can enter download mode.
- Flashing is succesfull.
Am I correct? Then my first guess would be that you have a faulty battery. Look if its more swollen than normal.
Click to expand...
Click to collapse
My phone is only 2 months also tried different battery, I ve 2 original. When i plug into wall charger only shows grey battery icon with static circle, but the funny thing is i suspect the battery is being charged.
When i boot into recovery it just stays at "recovery booting"ve left it for 30mins and when i turn on normally it stays on the splash screen.
Hi guys,
I was running cyanogenmod 12 on my s4 i9505 sucessfully. Today I decided to encrypt my device, and I went ahead with it and it was sucessful except for the fact my apps got deleted. I set the phone to factory reset as I didn't it anymore and it went ahead and restarted. However now it boots up with the blue text at the top left saying booting into the recovery, The Twrp screen (the blue one) comes up but it then disappears and reappears. Im not too sure on what to do. Also removing the battery and reinserting it doesn't make a difference, as when i switch my phone on again it comes up with the blue recovery boot text.
I would just like for my phone to work, I dont need any data back.
Thank you
Have you tried flashing a stock ROM from sammobile.com with Odin?
audit13 said:
Have you tried flashing a stock ROM from sammobile.com with Odin?
Click to expand...
Click to collapse
I found some firmware, but Im not sure which one Im meant to use. I bought my phone from amazon.
What is the baseband and bootloader on the phone? These two items will hep identify the stock ROM for the phone.
I would flash the recovery with Odin. See if you can get into download mode by holding power, volume up and home button simultaneously. If so you can download Odin to a PC and flash CWM or TWRP. Google the tar file for your specific device and you can find what you need. . Once set up on PC you can then connect phone to PC while in download mode and reinstall a recovery. Suggest you reinstall CM ROM if you have zip file and gapps file on an SD card. Good luck
Hello,
trying to help a pal bring his phone back to life.
Used the latest version of odin to flash an official rom. Odin showed that it had passed and flung up no errors. Boot loop remained.
Eventually tracked down the correct carrier via sammobile and downloading it.
If this doesn't work then I am out of idea's.
Anything else I could do to fix it or could it be hardware?
Before flashing, uncheck everything in Odin. Flash rom and, when you see the word "reset" in the status window, remove the USB cable, remove battery, replace battery, use button combination to boot into recovery, factory wipe, reboot.
Thanks ..... The only thing I didn't try there was factory wipe when in recovery
Sent from my iPhone using Tapatalk
flashed the official carrier rom and unfortunately it still boot loops.
Odin is showing pass every time i flash a rom and no errors
crazygoldfish said:
flashed the official carrier rom and unfortunately it still boot loops.
Odin is showing pass every time i flash a rom and no errors
Click to expand...
Click to collapse
Also it only boots into doing mode not recovery
thinking its hardware
now when i try to flash any roms at all its failing, even roms that previously passed.