[Q] N9005 at independently - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi.
I`ve got a big problem to my new Note 3. It acts independently. I made a video but I can`t post it.
Facts: N9005XXUBMJ3 [JB 4.3][Odin/Kies][DBT][1T][11.10.2013]
Anyone who knows the problem
Thanks a lot!

xRoYaL said:
Hi.
I`ve got a big problem to my new Note 3. It acts independently. I made a video but I can`t post it.
Facts: N9005XXUBMJ3 [JB 4.3][Odin/Kies][DBT][1T][11.10.2013]
Anyone who knows the problem
Thanks a lot!
Click to expand...
Click to collapse
Hi,
Believe you'll have to explain more.
Cheers!!!

manjeev said:
Hi,
Believe you'll have to explain more.
Cheers!!!
Click to expand...
Click to collapse
Heres the clip i made of the problem: youtube.com/watch?v=3HRDWYgPA2k&feature=youtu.be
I have a try. My device act without any touching on the touchscreen.

Related

Anyone got a Style-i to show Caller Names?

Hi Guys, I serached but can't find a solution to this. My new Style-i shows the numbers of the caller not the name. I tried the Jetware extension but it does absolutely nothing to help.... supposedly it causes the bluetooth stack to send the name instead of the number but it didn't work!
Please help if someone has managed this..
Thanks in advance.
I didn't know it was possible, thought it was only the number it could display...
I to would be interested if anyone could say how :-D
This may work…
http://forum.xda-developers.com/showthread.php?t=310373
dtread1 said:
This may work…
http://forum.xda-developers.com/showthread.php?t=310373
Click to expand...
Click to collapse
have you tried this ?
there are spoken about a BT Jabra 8010; not LG Style-I
any comment?
Palmchen said:
have you tried this ?
there are spoken about a BT Jabra 8010; not LG Style-I
any comment?
Click to expand...
Click to collapse
See post #18 on this http://forum.xda-developers.com/showthread.php?t=310373&page=2
xmen06 says it works.
Why dont you try?
Regards
I tried the instruction on the thread above.
It works with my i-style.
i didnt have the same luck. installed the trial of jetware 1.30, deleted my paired device, reset, repaired, tick next to caller id in advanced settings of jetware but still number only..... can anyone provide more detailed instructions of what im missing please.
also tried using that nokia setting file, and without checking the caller id ....
it works i have got the name display.
xmen06 said:
it works i have got the name display.
Click to expand...
Click to collapse
can you give details of what you did. did you remove the pairing then install jetware, or install then remove pairing? did you reset at all? use the nokia settings file....? please can you give further details?
Yep - step by step please as it certainly doesnt work here either!
jmdrizen said:
can you give details of what you did. did you remove the pairing then install jetware, or install then remove pairing? did you reset at all? use the nokia settings file....? please can you give further details?
Click to expand...
Click to collapse
same question from me : How/what can we install/use it ?
anyone explain step by step
thanks
Least I'm not the only one :-D
Thought it was just me who couldn't do it :-D
Look here
http://forum.xda-developers.com/showthread.php?t=310373
xmen06 said:
Look here
http://forum.xda-developers.com/showthread.php?t=310373
Click to expand...
Click to collapse
Yep..... this is already posted in post #5
Followed it, but it doesn't work for me and others here.
Can anyone provide detailed instructions for the LG Style-i... Please see my Post (#7)
Cheers
Hi!
The trick worked for me too, even without reseting the Athena or reparing the BT device.
The LG is a wonderful device desipte the sound quality, a bit "fuzzy"...
Thibale said:
Hi!
The trick worked for me too, even without reseting the Athena or reparing the BT device.
The LG is a wonderful device desipte the sound quality, a bit "fuzzy"...
Click to expand...
Click to collapse
Could someone please verify the exact steps that they did to make it work.
I know people have got it working, and am pleased for them, but for those of us that haven't can you spare some moments and give the steps?
I've followed the other steps to the letter and nothing, and if you can do it without resetting/re-pairing.... please share how :-D
I wonder if there are different 'versions' of the Style-i ? Maybe it's a different firmware?
adamelphick said:
I wonder if there are different 'versions' of the Style-i ? Maybe it's a different firmware?
Click to expand...
Click to collapse
I'd be surprised if there were as all versions I've seen and read about have the same core functions, the only difference I have seen is the colours it is available in.
Can no-one who has got it working list what they did? Whether they used the nokia file? Re-paired? And in bullet form for me to follow.. :-/... please?
Power problem!
Hello!
I am thinking about buying this LG Style-I but I have a problem.
For now, I can only buy it in USA where the power is 110-120Volts.
Here, in Europe, we have 220Volts, so if I connect the charger here it will burn.
Can I find the similar charger here in Europe? Which model?
Does anyone from Europe uses this LG?
Please help me decide!
Best regards,
Deiota

joystick does not work... help?

Hey All,
Just recently, the center button in my joystick stopped working.
I dont think anyone on this forum had this problem before because I searched for "joystick" and nothing came up.
I have an MDA with Windows Mobile 5 SE (the ROM with the WM5 rom with touchflow) if that makes a difference.
If someone can please point me in the right direction... as to whether this is a hardware or software problem, I would really appreciate it.
Thanks in advance for any help!
adi2coo said:
Hey All,
Just recently, the center button in my joystick stopped working.
I dont think anyone on this forum had this problem before because I searched for "joystick" and nothing came up.
I have an MDA with Windows Mobile 5 SE (the ROM with the WM5 rom with touchflow) if that makes a difference.
If someone can please point me in the right direction... as to whether this is a hardware or software problem, I would really appreciate it.
Thanks in advance for any help!
Click to expand...
Click to collapse
Maybe a hard re-set? Be sure you have a backup of your installed programs before doing it.
hotdog53 said:
Maybe a hard re-set? Be sure you have a backup of your installed programs before doing it.
Click to expand...
Click to collapse
That worked! (Well, I couldnt hard reset - so I just flashed again)
Thanks =)

Home TF3D Issue?

Has anyone had a problem with the Calendar link on the home TF3d not working? Does anyone know a solution for this? I have attached a screen shot of what I am talking about. Thanks in advance!
jthomas89466 said:
Has anyone had a problem with the Calendar link on the home TF3d not working? Does anyone know a solution for this? I have attached a screen shot of what I am talking about. Thanks in advance!
Click to expand...
Click to collapse
try to put back the orignal theme and check it.
ArchY said:
try to put back the orignal theme and check it.
Click to expand...
Click to collapse
Yeah that is my next step. I have seen where some people have reported this issue on custom theme's, but I am not sure how they fixed it or if they did fix it. Thanks for your response!
Before you do that...
If you had installed mUn_BackGround4AllPages_v.02, this seems to break the calendar link. There is a fix here in this link:
http://forum.xda-developers.com/showpost.php?p=2834511&postcount=485
Also, I believe the new version may fix this as well.
hefman said:
Before you do that...
If you had installed mUn_BackGround4AllPages_v.02, this seems to break the calendar link. There is a fix here in this link:
http://forum.xda-developers.com/showpost.php?p=2834511&postcount=485
Also, I believe the new version may fix this as well.
Click to expand...
Click to collapse
Thanks for the Information!
i don't have this problem but my diamond stuck at 12.00 evry night and sow me this note: press here to start touchflo 3d does anyone know what to do?
mike_kiritsis said:
i don't have this problem but my diamond stuck at 12.00 evry night and sow me this note: press here to start touchflo 3d does anyone know what to do?
Click to expand...
Click to collapse
I haven't heard of that issue... My problem was what Hefman listed above in post number 4.
mike_kiritsis said:
i don't have this problem but my diamond stuck at 12.00 evry night and sow me this note: press here to start touchflo 3d does anyone know what to do?
Click to expand...
Click to collapse
hey - exactly my problem! Doesn't happen every night - but as I'm using the phone as an alarm-clock this is pretty ugly... did you resolve it or figure out why this is happening?
I'm still on 1.37 ROM - guess my next step is to update... (if I find the time)

VsNotepad - Virtual Spaghetti

Anyone managed to get VsNotepad 2.5 to work properly on Touch HD?
http://www.virtualspaghetti.com/index.php?index=30&language=en
When I run the demo on my TouchHD the stylus position and what I draw are not aligned? (Approx 1/4 of the screen width and height out)
Software does say its 480x800 compatible, even mentions the Touch HD. (I've run the setup and put the settings to forced, but I still get the aligment issue.) Reported it to the creators, but wondered if Im alone in this issue?
marcopolo007uk said:
Anyone managed to get VsNotepad 2.5 to work properly on Touch HD?
http://www.virtualspaghetti.com/index.php?index=30&language=en
When I run the demo on my TouchHD the stylus position and what I draw are not aligned? (Approx 1/4 of the screen width and height out)
Software does say its 480x800 compatible, even mentions the Touch HD. (I've run the setup and put the settings to forced, but I still get the aligment issue.) Reported it to the creators, but wondered if Im alone in this issue?
Click to expand...
Click to collapse
No, you are not alone. I have the exact same problem, even though their website says it works in WVGA mode, it doesn't. I've sent them two emails in the past week and so far, no response. Makes me wonder why I bother paying for software...
jentech said:
No, you are not alone. I have the exact same problem, even though their website says it works in WVGA mode, it doesn't. I've sent them two emails in the past week and so far, no response. Makes me wonder why I bother paying for software...
Click to expand...
Click to collapse
Same here. And I pay for it
zlebandit said:
Same here. And I pay for it
Click to expand...
Click to collapse
Hopefully, it should be resolved soon...
----------------------------------------------------------------------
Hi,
First of all, sorry for the delay.
We have discovered some screen problem with the Touch HD.
This problem is know and will be fixed in our next release(available soon).
Best Regards,
Virtual Spaghetti Support.
marcopolo007uk said:
Hopefully, it should be resolved soon...
----------------------------------------------------------------------
Hi,
First of all, sorry for the delay.
We have discovered some screen problem with the Touch HD.
This problem is know and will be fixed in our next release(available soon).
Best Regards,
Virtual Spaghetti Support.
Click to expand...
Click to collapse
Hi,
Do you have any idea of when it will be fixed ?
Tks for you answer.
Regards.
zlebandit said:
Hi,
Do you have any idea of when it will be fixed ?
Tks for you answer.
Regards.
Click to expand...
Click to collapse
Not heard anything from VS yet... I keep checking the website...
I found this App so useful on my Kaiser, really missing it now on my THD
There is an updated Version now! I installed it and it works now. Problem for me, it looks so blury. Is this normal?
agmorpheus said:
There is an updated Version now! I installed it and it works now. Problem for me, it looks so blury. Is this normal?
Click to expand...
Click to collapse
Where did you download it from? I can see it has been updated to 2.51, but when downloaded it appears as version 2.5 with the same symptom on my device!
I will check whether there are traces from previous install in the registry.
carola said:
Where did you download it from? I can see it has been updated to 2.51, but when downloaded it appears as version 2.5 with the same symptom on my device!
I will check whether there are traces from previous install in the registry.
Click to expand...
Click to collapse
I have downloaded the 'official' version from their website and it does not work. It appears to be the exact same file I already have (it's the same size). It appears that they may not have updated their web links or have linked the file incorrectly. I have sent them an email.
they linked it wrongly.
try this link:
http://www.virtualspaghetti.com/public/VsNotepad251Setup.CAB
agmorpheus said:
they linked it wrongly.
try this link:
http://www.virtualspaghetti.com/public/VsNotepad251Setup.CAB
Click to expand...
Click to collapse
That's the one! Thanks
Happy it works now....however, I want a WVGA version now!!!!
One step at a time I guess!!
Has someone else noticed a dramaticly system slowdown after starting VsNotepad? Ending the program doesn´t solve the problem, only softreset does. You can notice the slowdown in TF3D or better in coreplay, which even stopps working.
If you have the same problem, is there a really gote alternative for VsNotepad?
Just to notice:
Softreset isn´t demanded if you close the app. in the app and not via taskmanager. That way I can live with the slowdown when the app is running.

Facebook upload in New 1.56 Roms

Hi there,
[justifying myself now - I DID search for it... just didn't find anything]
Question is - does any of you know if any of the new ROM developments based on 1.56 ROM have direct upload of pictures to Facebook from Album? For me it's quite important feature - right now I am using L26_THDV2.2_Ultimate but may have to go back in time... unless someone can help me.
Thanks in advance.
tammis said:
Hi there,
[justifying myself now - I DID search for it... just didn't find anything]
Question is - does any of you know if any of the new ROM developments based on 1.56 ROM have direct upload of pictures to Facebook from Album? For me it's quite important feature - right now I am using L26_THDV2.2_Ultimate but may have to go back in time... unless someone can help me.
Thanks in advance.
Click to expand...
Click to collapse
It is possible in Dutty's 3 xt - if you install Crackwhores .cab for upload.
Thanks, will try it right now
ZekeWolf said:
It is possible in Dutty's 3 xt - if you install Crackwhores .cab for upload.
Click to expand...
Click to collapse
It is an older version of the HTC Album and causes a small issue with the Manila wallpaper selection, but other than that, it works well I can't live without it seeing how I am such a Facebook whore!
OMG
How sad am I?
I felt REALLY excited when it worked and it did let me to upload a picture to facebook...
SAAAD ... but it WOOORKS
thank you zekewolf
and THANK YOU cRaCKwHoRe!!!! )
tammis said:
OMG
How sad am I?
I felt REALLY excited when it worked and it did let me to upload a picture to facebook...
SAAAD ... but it WOOORKS
thank you zekewolf
and THANK YOU cRaCKwHoRe!!!! )
Click to expand...
Click to collapse
LOL... you are quite welcome. I hope you enjoy it as much as I do
cRaCKwHoRe said:
It is an older version of the HTC Album and causes a small issue with the Manila wallpaper selection, but other than that, it works well I can't live without it seeing how I am such a Facebook whore!
Click to expand...
Click to collapse
Dude,
Is this the issue where you select the wallpaper and it just hangs viewing the pictures? Takes a few times to get them all up?
Is that the only issue?
Cheers,
Paul.
MrRalphMan said:
Dude,
Is this the issue where you select the wallpaper and it just hangs viewing the pictures? Takes a few times to get them all up?
Is that the only issue?
Cheers,
Paul.
Click to expand...
Click to collapse
It does one of two things:
1. Brings up a blank red screen and all you can do is cancel out of it, OR
2. Brings up the right screen and everything works, but the fonts are very very very small.
I don't change my background very often. And when I do, if I am getting the red screen issue I just uninstall it really quick, change my background, and reinstall it.
Hey guys
I recently flashed Lost In Asia V5 ROM and it had a very nice Facebook application.
I'm now on Miri V15 which doesn't have it.
I wonder if it is possible to have it as a .CAB ?
Could anyone help plz ?
Have a look here for the 1.0.0.7 Version.

Categories

Resources