Hey All,
Just recently, the center button in my joystick stopped working.
I dont think anyone on this forum had this problem before because I searched for "joystick" and nothing came up.
I have an MDA with Windows Mobile 5 SE (the ROM with the WM5 rom with touchflow) if that makes a difference.
If someone can please point me in the right direction... as to whether this is a hardware or software problem, I would really appreciate it.
Thanks in advance for any help!
adi2coo said:
Hey All,
Just recently, the center button in my joystick stopped working.
I dont think anyone on this forum had this problem before because I searched for "joystick" and nothing came up.
I have an MDA with Windows Mobile 5 SE (the ROM with the WM5 rom with touchflow) if that makes a difference.
If someone can please point me in the right direction... as to whether this is a hardware or software problem, I would really appreciate it.
Thanks in advance for any help!
Click to expand...
Click to collapse
Maybe a hard re-set? Be sure you have a backup of your installed programs before doing it.
hotdog53 said:
Maybe a hard re-set? Be sure you have a backup of your installed programs before doing it.
Click to expand...
Click to collapse
That worked! (Well, I couldnt hard reset - so I just flashed again)
Thanks =)
Related
I've just tried to unhide my extended rom with help of 2 registry keys. now my device does not boot up. It stays on white blank screen.
What can I do ? (other than hard reset ?)
Is there a way to boot up without reading registry keys ?
is there a way to edit the registry of a not booted device ?
or any way to open device without reading registry ?
Well, I'm only a newbie myself, so I don't know if this will help. I unhid my own extrom yesterday with reg tweaks. There we more than two changes to make, mind you, including the addition of a dword value that didn't exist on my 8525. You don't offer what type of device you are using, so that might limit how much help you get here, btw.
Anyway, have you tried soft resetting by using the stylus in the hole at the bottom of the device? That MIGHT do something different and let you get into the system.
There is a safe mode that some 3rd party offers ... I think SPB PocketPlus...but that won't help if it's not already installed, and I'm not sure it would help in your circumstance.
Anyway...good luck. I hope this, or someone else's advice can help you.
-pvs
pvs,
thank you. I had to hard reset. now I am trying to install everything back.
it will be hard...
Btw, I of course tried to soft reset with the stylus.
My device is I-Mate Jasjam (HTC Hermes)
mrmrmrmr said:
pvs,
thank you. I had to hard reset. now I am trying to install everything back.
it will be hard...
Btw, I of course tried to soft reset with the stylus.
My device is I-Mate Jasjam (HTC Hermes)
Click to expand...
Click to collapse
What you didn't have a comprehensive back up!! Oh dear dear dear. That's a hard lesson I learned a while back. Now I could happily hard reset right now and be fully back up and running in say 10 minutes with SPB backup. A lesson for all.
Mike
in fact I am using SK tools for backup. but my backup was too old.
This is a new device and I installed a lot of software lately.
Well, look on the bright side, you have cleared out all the 'stuff' that builds up on a system after a lot of installing and uninstalling, and you're sure to build it better this time. It's just irritating that this kind of thing usually happens when you have no time.
mrmrmrmr said:
in fact I am using SK tools for backup. but my backup was too old.
This is a new device and I installed a lot of software lately.
Click to expand...
Click to collapse
Mmmm yes I have that problem remembering to do the backup often enough, sods law something goes pear shaped when you haven't done one for a while
Mike
exactly ))
well its going well now...
just losing time.
I need a little help.
After a crash I hardresetted my Hermes and then used SK Tools to return to a backup point. But now when I try to activesync I get a message on my PC saying that the mobile device has already synced with another PC and it requests a new name for this PC.
I haven't synced with another PC. What shoukd I do ?
Since last month my hermes vibrate does not work!! First I thought it software problem. but even I upgraded the rom still not working!!
Please help!!
Thanks in advance
hi25man said:
Since last month my hermes vibrate does not work!! First I thought it software problem. but even I upgraded the rom still not working!!
Please help!!
Thanks in advance
Click to expand...
Click to collapse
Oiy!! remember to search.
Anyway, if you have exhausted all other possibilities up to and including a hard reset (and testing with no third party stuff installed), checked all options settings etc then you may have this problem.
http://forum.xda-developers.com/showthread.php?p=1186189&highlight=vibrate#post1186189
Mike
Miki Thank you very much.
I'll try to open it but so hard to find a screwdriver like that!!
hi25man said:
Miki Thank you very much.
I'll try to open it but so hard to find a screwdriver like that!!
Click to expand...
Click to collapse
Don't know where you are from but they are available in shops like Maplin or from the web.
Mike
Done!!
I just cleaned the spring contacts.
Thanks mike!!!
Since a few weeks I have the following problem. Most of the time when I'm surfing on the internet and I close the browser, my phone hangs. I can 'press' the buttons below and it will vibrate. Also the powerbutton works, but the screen itself is totally locked and won't react to any touches.
Does anyone knows what the problem could be?
I'm using the standard NL ROM.
Thnx in advance.
demo1987 said:
Since a few weeks I have the following problem. Most of the time when I'm surfing on the internet and I close the browser, my phone hangs. I can 'press' the buttons below and it will vibrate. Also the powerbutton works, but the screen itself is totally locked and won't react to any touches.
Does anyone knows what the problem could be?
I'm using the standard NL ROM.
Thnx in advance.
Click to expand...
Click to collapse
already report on a least other topic, please use the search function of this forum, I got the same problem
PJMDS said:
already report on a least other topic, please use the search function of this forum, I got the same problem
Click to expand...
Click to collapse
I tried the search function in here, but couldn't find the problem. Is there an solution posted already?
if you installed the ati driver for VR hologram, remove it and you will get your problem fixed.
it is written somewhere here
I started a thread about this issue (here).
And no, removing the 3D driver didn't solve anything.
did you delete htcapi.dll?
uninstaling ati driver + deleting htcapi.dll solved the freezing problem for me
noris08 said:
did you delete htcapi.dll?
uninstaling ati driver + deleting htcapi.dll solved the freezing problem for me
Click to expand...
Click to collapse
It worked! Thanks for the advice.
Hi, sorry but i dont find any threads with this problem...so i made a ROM upgrade on my Himalaya device earlier. It works but only the camera has trouble. No reaction for the button i press. I remember i had the same problem much earlier (approx. two years ago ) and somebody sent me a camera.cab or something like that. I teleported it to my pda and it fixed my button problem. Can somebody help me please? WM2003 SE 4.21.1088 ROM 2.02.. thank you in advance. BBR
A little bit of research pays off:
http://forum.xda-developers.com/showthread.php?t=249857
go nuts!!
Camera
Hi, thanks for your suggestion. I just downloaded the cabinet and installed it. I'm very sorry it doesn't work. I got the camera icon in my programs menu but if i try to launch it the win says - cannot find 'camerav2.7b21026' (or one of its components). Make sure the path...correct and all the....libaries available.
Any idea?
Thanks
BBR
flyboyovyick2k9 said:
A little bit of research pays off:
http://forum.xda-developers.com/showthread.php?t=249857
go nuts!!
Click to expand...
Click to collapse
Solved
A littlebit of research pays off indeed.
I found it on the ftp near an asian rom
Problem is solved - case is closed
backboneranger said:
Hi, thanks for your suggestion. I just downloaded the cabinet and installed it. I'm very sorry it doesn't work. I got the camera icon in my programs menu but if i try to launch it the win says - cannot find 'camerav2.7b21026' (or one of its components). Make sure the path...correct and all the....libaries available.
Any idea?
Thanks
BBR
Click to expand...
Click to collapse
Acai force max
Thank your for sharing this wonderful story. I find your post very informative.
I am very excited to be a part of this Forum and look forward to bringing Value to it.
Hi all,
I'm really hoping someone can help me with this. I've just gotten Destinator 9 and am having a problem that I'll describe. I've tried 3 or 4 of NRG's ROMs with the same result on all of them but have not tried with the default AT&T ROM.
Destinator installs correctly however, every 3 seconds a "Symbols" screen (see screen shots attached) appears that covers up nearly the entire screen which makes a GPS app kind of hard to use.
Ideally, I'd like a permanent fix, but I'd also be willing to try renaming or deleting whatever executable is running that is displaying the "Symbols" screen.
Any ideas?
Thanks!
Just to close the loop on this I'd sent the Destinator support folks a note about the issue and they've provided me with a fix that solves the problem. Apparently the fix is supposed to be integrated into a new release that should be up on their store later this week or next week.
dou you have the fix file? I have the same issue.. Tnks
I have this issue too.
Please upload the fix.
Same here.Any help?
New Rom show the problem
Sorry for my english.
I have HTC HD2 and after update rom from 1.48 to 1.61 appear symbol.
Any solucion?
I have the same issue in HTC Diamond 2 (topaz) WM6.5
Please upload the fix.
Why do not you contact the Destinator*9 Customer Service?
It is not always something wrong with the Rhodium this problem probably with app itself
Yeah, this thing hapends to me too. Even when I close the app. Hope you can share the fix. Thanks.
pkadare said:
Just to close the loop on this I'd sent the Destinator support folks a note about the issue and they've provided me with a fix that solves the problem. Apparently the fix is supposed to be integrated into a new release that should be up on their store later this week or next week.
Click to expand...
Click to collapse
For all those asking for me to post the fix, I'm not going to do so. If you've got a legit copy of Destinator and are hitting this problem, then contact Destinator support and they will hook you up. If you don't have a legit copy, well then I can't help you out.
Uhh!!! What a bad guy!!
youtashiro said:
Uhh!!! What a bad guy!!
Click to expand...
Click to collapse
Wow, if I really cared about what some anonymous dickwad on the Internet thought about me... well, I don't care, so never mind.
Whats the point mentioning you got the fix if you wont care to help others, ok you are afraid to be a pirate helper.
rk73 said:
Whats the point mentioning you got the fix if you wont care to help others, ok you are afraid to be a pirate helper.
Click to expand...
Click to collapse
To let people know that a fix is available from the vendor.
I propose to disregard pkadare problems and comments. Saying that there is a fix available with the vendor instead of posting it, is not very helpful. Someday you will need a file or help, hope you dont get it.
jorgemorfin said:
I propose to disregard pkadare problems and comments. Saying that there is a fix available with the vendor instead of posting it, is not very helpful. Someday you will need a file or help, hope you dont get it.
Click to expand...
Click to collapse
Knock yourself out sport. I happen to own my software.
solution
hi
i have the solution
in fact it is a keyboard issue
install another keyboard ( i installed taptap keyboard)
also install the destinator loader
switch to this keyboard before launching destinator loader and you wont have anymore symbols
jdcesari said:
hi
i have the solution
in fact it is a keyboard issue
install another keyboard ( i installed taptap keyboard)
also install the destinator loader
switch to this keyboard before launching destinator loader and you wont have anymore symbols
Click to expand...
Click to collapse
Thank you, was the solution, installs Swype, and now works fine.
irkan said:
Why do not you contact the Destinator*9 Customer Service?
It is not always something wrong with the Rhodium this problem probably with app itself
Click to expand...
Click to collapse
if you dont use official rom, customer service will tell you it is your rom's problem..it is not their business
so, change other roms, or change GPS software