Database Users

Cannot replace nv_data.bin

Hello all,
first to all who will say I must read the forum for problem solving - I did but from all the info out there it was simply too much. So I decided to start a thread in the hope that somebody will be able to help me.
So I have a corrupted nv_data.bin in my /efs folder but I still have backup of this file. But only this file.... I know - totaly dumb... I installed new JPX and after trying to change the product code from KOR to MOT (Slovenia) I accidentaly deleted nv_data.bin. I of course tried to replace it thru Astro Mate (I did had rooted phone - Darky's 6.0 was working fine ) but everytime I tried copiing this file tt didn't copy actualy - It said copied but the old file remained there - I know this because the Productcode didn't change. So I deleted the file thinking that this will help and tried to copy again. To my bad luck it didn't. I tried to copy and everytime a new file was created instead. also renaming a bakup file in this folder was not succesfule - it said Fald to rename file nv_data.bak. Since then my SIM card is not recognized and when I check what Baseband version I have it it written Unknown. So I tried even with ADB Shell, use busybox and when I eneter cp /sdcard/nv_data.bin /efs it says Now enough free space??? So I don't know anymore what to do. Does somebody have an idea what I can try to solve this? Please please please? I will donate to the one who helps me saving my SGS.
Thanks,
Borut

Hi !
This is because the file is used by the system.
Safest method:
- Reboot into recovery (make sure you have root in recovery)
- do what do need to do in recovery
- Reboot in normal state
In recovery phone / baseband / RIL are not started.

so you mean when I boot in recovery i can copy the file using adb shell? Or how do you mean I can do what I must do?

I have done it before while the phone is on, but you have to enter flight mode, set the correct owner and rights and reboot afterwards.

Well, regarding ownership and stuff like that - I'm a tootal noob

Help please NV_Data.BIN
I know this isn't the place to post this but I have been trying since yesterday afternoon can't figure out where I should post it to I keep getting an error that due to spam I can't post to certain areas without having 10 posts.
Please help -
I am not sure what to do now. I changed the rom on my phone to put 2.2 on it a while back. I never saved any of the files because I was not aware to. Now I am trying to go back to stock already used the one click Odin program and I have the original stock firmware on it. But when I try to update via kies mini it will not show up. I have searched And found multiple postings related to the fact that the product id and imei could be incorrect and you would need the original nv_data.bin file. I have searched through windows explorer on the phone but can't seem to locate one. Is there any way that I can get a copy of the original folder for /efs/nv_data.bin and any other files that are needed?
I have the Samsung Captivate on AT&T currently running 2.1
BaseBand: I897UCJF6
Kernel Version: 2.6.29 [email protected] #2
Build number: ECLAIR

You need to check your IMEI matches your original .
You have stock rom stock as in not the network supplied firmware that came with the phone ..
Windows explore is no good you need something like root explorer .#
I can get a copy of the original folder for /efs/nv_data.bin and any other files that are needed? Not unless you saved them they are phone specific .
Worth doing a factory reset before you make any step as that may solve your problem .
jje

how do I check the original imei? I didn't backup the files as I was not advised to in the information I found online at the time (couple months back). I have done a factory reset via the phone (privacy settings) a couple times now and still when I plug into kies it tells me Unregistered device.

This is very simple to fix if you have nv_data.bak in the EFS folder.
If that file is present then you can safely delete nv_data.bin and reboot the phone.
A new nv_data.bin will be generated.

how do i know if I have nv_data.bak? where on the phone would I find it and how?

Gotmtdew said:
how do i know if I have nv_data.bak? where on the phone would I find it and how?
Click to expand...
Click to collapse
It should be in the efs folder (unless you've done something to delete it). As said by JJEgan, you will need root explorer. Navigate to it in the efs folder and copy it to the external sd card and then keep it safe somewhere.

how do I check the original imei?
Its on the box and or with the receipt .
jje

[Q] Flashing an I5800

Hi everyone
I've got a few questions about flashing an Android phone. I've tried going through KIES but unfortunately they don't have any updates for the below mentioned model.
I've got an GT-I5800XXXMST (Belgium telecom model) that I want to flash using Odin. I want to use the following image: I5800XWJPE.tar
1. Do I need to remove the sbl.bin, boot.bin and logo.png to play it safe? In that in that case I always retain the ability to flash
2. Do I need to edit the OPS file and remove the above mentioned entries?
3. Which OPS file should/can I use? Are they all the same for the I5800? (apollo_0531.ops)
4. Which version of ODIN do I need to use? I currently have I5800_Odin_Multi_Downloader_v4.252.exe
5. Do I need to backup my EMEI?
6. Simple and plain backup tool for upping my current os?
7. Any tips?
Many thanks all,
Tempert

tempert said:
Hi everyone
I've got a few questions about flashing an Android phone. I've tried going through KIES but unfortunately they don't have any updates for the below mentioned model.
I've got an GT-I5800XXXMST (Belgium telecom model) that I want to flash using Odin. I want to use the following image: I5800XWJPE.tar
1. Do I need to remove the sbl.bin, boot.bin and logo.png to play it safe? In that in that case I always retain the ability to flash
2. Do I need to edit the OPS file and remove the above mentioned entries?
3. Which OPS file should/can I use? Are they all the same for the I5800? (apollo_0531.ops)
4. Which version of ODIN do I need to use? I currently have I5800_Odin_Multi_Downloader_v4.252.exe
5. Do I need to backup my EMEI?
6. Simple and plain backup tool for upping my current os?
7. Any tips?
Many thanks all,
Tempert
Click to expand...
Click to collapse
1) Yes removing boot.bin and sbl.bin would be safe.
2) No need to edit ops or anything.
3) Ops is same for all ROMS(i.e. apollo_0531.ops).
4) The ODIN version that you have mentioned is the correct version. Use that.
5) Yes. Backing up IMEI would be good. For tutorial click here.
6) Use titanium backup to backup apps.

1. yes, but you can download romfiles without those files in the forums
2. no, you just remove them from the tar archive
3. all the same
4. that's the one
5. better be safe, but I haven't had a problem with it
6. Alexgalaxy's backup script
7. read and search the forum

Go for jpn or jpm . Yes you have to remove the files to avoid hardbrick. Dont worry its been done by dharamg3
use this link:
http://forum.xda-developers.com/showthread.php?t=1125387
After downloading from the above thread thread
Just use apollo_0531.ops for flashing using the odin that you have
Yes it is recommended to backup your IMEI
Use this thread for backup and restore of IMEI
http://forum.xda-developers.com/showthread.php?t=888193
The IMEI is stored in a partition called efs
And root your phone before you backup

Many thanks all!!
Verry clear answers

Running 2.2 happily
Yesss!

Any luck with the backup of your original firmware ? Could you share the factoryfs.rfs ?

I have tried to backup my phone with that Alexscript. Although It gave some errors about not finding some directories...
Will the factoryfs.rfs contain personal data?

No, it's your system partition; personal info is stored in the data partition. You have root and your sdcard is big enough for the backup (500MB free should do it) ?
But if you have already flashed another rom, there's obviously no need. I thought about having an original "Orange" rom for when I need to use warranty on my phone.

It's a Mobistar rom. I think I have it but the .tar file was only 200Mb big if I remember correctly. I will try an upload it if I have the time.

Hmm, yeah, I meant Mobistar obviously.
Sounds about right. You can zip it again to save a lot of space.

Error message during factory reset

Hi guys,
I'm new in this forum, I hope you can help me with this weird thing. Excuse me if my english isn't very good, I'm spanish. Thanks in advance!
My firmware is XWKF3, from http://forum.xda-developers.com/showthread.php?t=1075278
When I do a factory reset, in factory reset log I can see something like:
installing multi-CSC
can't acces to '/system/csc/FOP/system'
Sucessfull applied multi-CSC
Should I worry about it?
I think that this message is relative to salescode, because Spain generic salescode is FOP, and previously to this version, when I had the Vodafone (Spain) firmware version, with CSC: KE2 (ATL), the message was something like: can't acces to '/system/csc/ATL/system'
Best regards

CSC is country specific code.
It says applied Multi CSC so unless problems dont worry .
jje

JJEgan said:
CSC is country specific code.
It says applied Multi CSC so unless problems dont worry .
jje
Click to expand...
Click to collapse
And is normal receive the access problem to the mentioned path?
Thx

culoescopeta said:
Hi guys,
I'm new in this forum, I hope you can help me with this weird thing. Excuse me if my english isn't very good, I'm spanish. Thanks in advance!
My firmware is XWKF3, from http://forum.xda-developers.com/showthread.php?t=1075278
When I do a factory reset, in factory reset log I can see something like:
installing multi-CSC
can't acces to '/system/csc/FOP/system'
Sucessfull applied multi-CSC
Should I worry about it?
I think that this message is relative to salescode, because Spain generic salescode is FOP, and previously to this version, when I had the Vodafone (Spain) firmware version, with CSC: KE2 (ATL), the message was something like: can't acces to '/system/csc/ATL/system'
Best regards
Click to expand...
Click to collapse
Hi There. I had the same problem as I Flashed my Phone with XXKL1 and it contained Multi-CSC but I am in Canada with Bell so I should have Bell CSC applied, but after flashing the rom with Multi-CSC I started to get that problem so here was my fix to it:
1. Make sure your phone is rooted and Superuser and busybox installed. You will also need a root explorer such as ESFile Explorer or Root Explorer
2. Now install Root Explorer or ESFile Explorer with root permission enabled.
3. Now go back to download mode and Flash/Apply your CSC file.
4. Once it boots up let it do its thing. (You will still get that message but don't worry)
5. Now go to the RootExplorer or ES File Explorer and mount as R/W (Read-Write) and then go to "/system/csc" and rename your original CSC code for example if I am in Canada i have BMC for Bell, I will rename that to FOP and delete the rest of the CSC folders as I do not need them. (i did in my case to give me more system space as it would not write more if you do not have system space). If you want you can leave them in yours.
6. Now reboot your phone into Recovery Mode and let it do its thing you will see that message will disappear. Once its done that, Boot up your phone then go back to the fileExplorer or ESFIle Explorer "/system/csc" and rneame that renamed folder FOP back to your country code and done. You will also see that now you have many files in that directory and not just the folders.
Try it out and let me know. Good Luck

*2767*3855# and then boot into recovery and it sets itself to a CSC

[GUIDE]How to make a rooted flashable rom from ftf file[FOR ALL XPERIA PHONES]

Hi friends,
This Guide might be Helpful for all Xperia device Users/Developers
1.First you need to download these 4 files
a)FTF extractor
b)META-INF folder and ROOTING files
c)7zip
d)Notepad++(Optional)
2.Extract ftf extractor anywhere you like
3.Open the *FTF file with 7Zip
You'll see these files and folders
Code:
META-INF
adsp.sin
amss.sin
amss_fs_urushi.sin
apps_log.sin
cache.sin
fota0.sin
fota1.sin
kernel.sin
loader.sin
system.sin
userdata.sin
4.Extract system.sin to the folder where you extraxt ftf-extractor.
5.Press SHIFT+RIGHT CLICK on the empty space of the folder.You'll see a dialog like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6.select OPEN COMMAND WINDOW HERE
7.Type
Code:
aIUP.exe system.sin 4096 system
8.If this not work for you use 2048 or 8192 instead of 4096:good:
9.You'll see
Code:
C:\ftf_extractor>aIUP.exe system.sin 4096 system
UnPacking system.sin to system ...
done.
C:\ftf_extractor>
Congratulation now you have extracted System from the ftf file
10.Now open the downloaded META-INF AND ROOT.zip
then,go to system and cut
Code:
app
xbin
bin
and pasteit in your extracted system folder (In step 9)
***Now your rom is rooted*****
OR
You can use Kitchen to ROOT YOUR ROM
11.Then Move your Rooted system folder to the META-INF ZIP
***Now you have made a flashable zip file****
13.(Optional)go to META-INF/com/google/android/updater-script and edit it with Notepad++
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:Thats all:victory::victory::victory::victory::victory:
Lastly, Hit THANKS if you like it... and rate this thread 5-STAR
Knight47

very nice guide - well done
as there are no roms yet for the 587 update, this is a nice guide for a beginning

nosedive said:
very nice guide - well done
as there are no roms yet for the 587 update, this is a nice guide for a beginning
Click to expand...
Click to collapse
There are roms based on that update such as my rom...
Sent from my Transformer TF101 using xda app-developers app

But how about LT15i ICS with vendor.sin ?
Sent from my LT15i using xda premium

How to repack the system folder to system.sin?

Wish there was a way to pack everything into a .sin file..
Sent from my MK16a using xda app-developers app

jcgechevarria said:
How to repack the system folder to system.sin?
Click to expand...
Click to collapse
You can't repack.
flsmidth said:
Wish there was a way to pack everything into a .sin file..
Sent from my MK16a using xda app-developers app
Click to expand...
Click to collapse
no you can only get the system folder from system.sin

too bad we can not repack. If we could we could make .ftf files, am i right?
Isn't there anyone working at sony who can slip the program for making .ftf-files this would make the lives of people with locked bootloader but with custom roms a lot easier. Now when we are stuck we always have to flash back to stock, root and then install recovery before we can install a custom rom.
Isn' there realy any other way. Isn't it possible to make a program, or a feature in flashtools so that the battery charging hack like used in x-parts can be runned "externaly", what i mean is so when the phone is hooked up en restarted/started it goes straight to recovery. Or is this far fetched?
---------- Post added at 08:10 PM ---------- Previous post was at 07:50 PM ----------
dahakske said:
too bad we can not repack. If we could we could make .ftf files, am i right?
Isn't there anyone working at sony who can slip the program for making .ftf-files this would make the lives of people with locked bootloader but with custom roms a lot easier. Now when we are stuck we always have to flash back to stock, root and then install recovery before we can install a custom rom.
Isn' there realy any other way. Isn't it possible to make a program, or a feature in flashtools so that the battery charging hack like used in x-parts can be runned "externaly", what i mean is so when the phone is hooked up en restarted/started it goes straight to recovery. Or is this far fetched?
Click to expand...
Click to collapse
oh wait i see flash tool has this feature, question: will this feature also work with locked bootloaders but with x-parts recovery installed? sorry knight47 this is off-topic but still i would appreciate a an answer.
again sorry
Thanks

Then if i can't repack system foldre to system.ini which is the utility of this?
Sorry if i askin nosense

Ok I tried this, and tried this, and tried this lol
I keep getting bootloop.
Well it doesn't seem to get past the first bootscreen.
I am trying to root a UK .62 firmware
Is there something I'm missing?
Thanks

zippy01 said:
Ok I tried this, and tried this, and tried this lol
I keep getting bootloop.
Well it doesn't seem to get past the first bootscreen.
I am trying to root a UK .62 firmware
Is there something I'm missing?
Thanks
Click to expand...
Click to collapse
before flash it from CWM.
you must to execute other CWM function.
Wipe data and cache!
wipe dalvik
Format /system (in mounts and storage)

Yup, I cleared cache, data and dalvic
Also formatted system, cache and data in mounts
Did this straight after installing and rooting a fresh rom.
Every time just doesn't get past the first Sony Ericsson screen
Could it be that I added a couple of extra apps?
Idk tried it loads of times lol
Even tried pulling the battery and rebooting again. I left it on the Sony screen for well over an hour just to make sure
Thanks for your reply
Sent from my LT18i using xda premium

Knight47 said:
Hi friends,
This Guide might be Helpful for all Xperia device Users/Developers
1.First you need to download these 4 files
a)FTF extractor
b)META-INF folder and ROOTING files
c)7zip
d)Notepad++(Optional)
2.Extract ftf extractor anywhere you like
3.Open the *FTF file with 7Zip
You'll see these files and folders
Code:
META-INF
adsp.sin
amss.sin
amss_fs_urushi.sin
apps_log.sin
cache.sin
fota0.sin
fota1.sin
kernel.sin
loader.sin
system.sin
userdata.sin
4.Extract system.sin to the folder where you extraxt ftf-extractor.
5.Press SHIFT+RIGHT CLICK on the empty space of the folder.You'll see a dialog like this
6.select OPEN COMMAND WINDOW HERE
7.Type
Code:
aIUP.exe system.sin 4096 system
8.If this not work for you use 2048 or 8192 instead of 4096:good:
9.You'll see
Code:
C:\ftf_extractor>aIUP.exe system.sin 4096 system
UnPacking system.sin to system ...
done.
C:\ftf_extractor>
Congratulation now you have extracted System from the ftf file
10.Now open the downloaded META-INF AND ROOT.zip
then,go to system and cut
Code:
app
xbin
bin
and pasteit in your extracted system folder (In step 9)
***Now your rom is rooted*****
OR
You can use Kitchen to ROOT YOUR ROM
11.Then Move your Rooted system folder to the META-INF ZIP
***Now you have made a flashable zip file****
13.(Optional)go to META-INF/com/google/android/updater-script and edit it with Notepad++
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:Thats all:victory::victory::victory::victory::victory:
Lastly, Hit THANKS if you like it... and rate this thread 5-STAR
Knight47
Click to expand...
Click to collapse
Nice one, but any chance to get system file bact to .sin after editing i cant find anywhere xD

AlenKing said:
Nice one, but any chance to get system file bact to .sin after editing i cant find anywhere xD
Click to expand...
Click to collapse
Already been answered... http://forum.xda-developers.com/showthread.php?p=30700187
Sent from my LT18i using xda premium

Nice one. Thank you. Helps for someone new lokie me, looking around to figuring things out on my own by trial and error.. takes a lot of the "error" out of things..

I am getting bootloops.
Obviously I am doing something wrong, as others have gotten it to work.
Here's what I did:
1. Using FTF (GB ST15i 4.0.2.A.0.62)
2. Extract system.sin
3. Unpack system.sin using FTF extractor & got the system folder (inside which has folders: app, bin, xbin along with other folders)
4. Downloaded META-INF AND ROOT.zip (inside which has system folder: app, bin, xbin)
5. I copied the contents of the system folder (app - Superuser.apk, bin - su & xbin - busybox) and pasted on system folder (in their respective subfolders app, bin & xbin)
6. I create a zip file combining "system" and "META-INF"
7. Placed zip on SD Card, flash using CWM, power up and get bootloops
Anybody has any idea what I am doing wrong?
Any help appreciated! Thanks!!

What About Just Flash Su & Binary via CwM?
I don't Understand the sense... ...better would be: how to make ftf Flashable
Sent from my Xperia Arc S using xda app-developers app

miniminnow said:
I am getting bootloops.
Obviously I am doing something wrong, as others have gotten it to work.
Here's what I did:
1. Using FTF (GB ST15i 4.0.2.A.0.62)
2. Extract system.sin
3. Unpack system.sin using FTF extractor & got the system folder (inside which has folders: app, bin, xbin along with other folders)
4. Downloaded META-INF AND ROOT.zip (inside which has system folder: app, bin, xbin)
5. I copied the contents of the system folder (app - Superuser.apk, bin - su & xbin - busybox) and pasted on system folder (in their respective subfolders app, bin & xbin)
6. I create a zip file combining "system" and "META-INF"
7. Placed zip on SD Card, flash using CWM, power up and get bootloops
Anybody has any idea what I am doing wrong?
Any help appreciated! Thanks!!
Click to expand...
Click to collapse
I was also getting bootloop and no one could help maybe we are doing the same thing wrong
Sent from my LT18i using xda premium

Thank you zippy01 for reporting your experience.
Just sharing, I have used this method to root and upgrade ROM successfully: http://forum.xda-developers.com/showthread.php?t=1688980

I have an e dual and tried this
Extracted system and placed the attached meta-inf together
But should I edit the updater scrip or update binary???
Or can I just copy the folder from cm10 Rom for my device
Please I need help
Sent from my C1604 using xda app-developers app

Xposed error on 2.22.40.54

How I can install Xposed framework on this version of KitKat? I try to install via apk (2.7 experimental), and I got this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

install xposed app version 2.6.1
and click install/update
reboot..
I use ww 2.24.40.54..
with xposed 2.6.1
I don't exactly remember how I installed Xposed.. but I think that was what I did..
just Search once before doing what I said..
make sure you have backup of all your data..

xposed app screenshot for your reference
I am posting screen for first time.. so if it is not posted sorry..

nileshwarale said:
install xposed app version 2.6.1
and click install/update
reboot..
I use ww 2.24.40.54..
with xposed 2.6.1
I don't exactly remember how I installed Xposed.. but I think that was what I did..
just Search once before doing what I said..
make sure you have backup of all your data..
Click to expand...
Click to collapse
2.6.1 apk gives me the same error. But i'm fixed it. For those with the same problem, I take app_process32 from /system/bin and libandroid_runtime.so from /system/lib, from 2.22.40.53 firmware, and overwrite these files on my /system/bin and /system/lib partition. After reboot, i'm able to install Xposed framework.
The Xposed apk don't work on this new version because the new security patch.
Here's the files you need: https://www.mediafire.com/?gq97065u1sfw62r

just for info..
can you please list xposed modules that you use..
gravitbox box does not properly work on kk
I only use
Greenify..
gravitybox..
nothing else

nileshwarale said:
just for info..
can you please list xposed modules that you use..
gravitbox box does not properly work on kk
I only use
Greenify..
gravitybox..
nothing else
Click to expand...
Click to collapse
GravityBox is very limited on KitKat, so I don't use it. I use Xposed more because the module xInternalSD, helps me a lot, because my phone is the 8GGB version, and I have a 32GB SD card. I also use greenify and two modoules to expand notifications on notification panel. Flat style modules is a very good option for modifications on status bar, occasionally I use it.

leonardohenrique10 said:
2.6.1 apk gives me the same error. But i'm fixed it. For those with the same problem, I take the two files Xposed use to install from 2.21.40.44 firmware, and overwrite these files on my system. After reboot, i'm able to install Xposed framework. Here are the files I used (on attachment)
(PS: Don't flash the zip, this isn't a flashable zip. Simple overwrite the two files in /system/bin and /system/lib fodler of your phone, with a Root file manager.)
The Xposed apk don't work on this new version because the new security patch.
Click to expand...
Click to collapse
Hello, i tried according to your given steps but eventually got bootloop, i unable to paste files using ES file explorer. Please help how could u overwrite the files in system? Thanks

Punit. Kl said:
Hello, i tried according to your given steps but eventually got bootloop, i unable to paste files using ES file explorer. Please help how could u overwrite the files in system? Thanks
Click to expand...
Click to collapse
Enable Root Explorer in ES tools
And please, don't use the files from this post, I encountered some bugs using 2.21.40.44 files. To have Xposed working without bugs, copy these files from 2.22.40.53 firmware to your system.

leonardohenrique10 said:
GravityBox is very limited on KitKat, so I don't use it. I use Xposed more because the module xInternalSD, helps me a lot, because my phone is the 8GGB version, and I have a 32GB SD card. I also use greenify and two modoules to expand notifications on notification panel. Flat style modules is a very good option for modifications on status bar, occasionally I use it.
Click to expand...
Click to collapse
I replaced those 2 files from previous 2.22.40.54 firmware and it worked! Thank you so much for showing us.

leonardohenrique10 said:
Enable Root Explorer in ES tools
And please, don't use the files from this post, I encountered some bugs using 2.21.40.44 files. To have Xposed working without bugs, copy these files from 2.22.40.53 firmware to your system.
Click to expand...
Click to collapse
I already enabled root explorer, Actually when i try to overwrite those 2 files i getting error. And sometimes i phone get hang then i have to manually switch off and then when i try to switch back on i have bootloop..

Punit. Kl said:
I already enabled root explorer, Actually when i try to overwrite those 2 files i getting error. And sometimes i phone get hang then i have to manually switch off and then when i try to switch back on i have bootloop..
Click to expand...
Click to collapse
Download Root Explorer from Google Play, open it, go to /system and "Mount as R/W"
Now try to copy the files.
I didn't get any error while replace these files, except when I reboot (if I use the wrong files).

leonardohenrique10 said:
Download Root Explorer from Google Play, open it, go to /system and "Mount as R/W"
Now try to copy the files.
I didn't get any error while replace these files, except when I reboot (if I use the wrong files).
Click to expand...
Click to collapse
I using es file explorer with root. I tried many times bro and ended with bootloop. Actually i m on latest Kitkat security patch. I even tried overwrite file with twrp recovery too but ended up with BOOTLOOP.. ??

Punit. Kl said:
I using es file explorer with root. I tried many times bro and ended with bootloop. Actually i m on latest Kitkat security patch. I even tried overwrite file with twrp recovery too but ended up with BOOTLOOP.. ??
Click to expand...
Click to collapse
Then I recommend you to downgrade to 2.22.40.53 or 2.22.40.54 to use Xposed.

leonardohenrique10 said:
Then I recommend you to downgrade to 2.22.40.53 or 2.22.40.54 to use Xposed.
Click to expand...
Click to collapse
Thanks for the help though bro.. ?

leonardohenrique10 said:
2.6.1 apk gives me the same error. But i'm fixed it. For those with the same problem, I take app_process32 from /system/bin and libandroid_runtime.so from /system/lib, from 2.22.40.53 firmware, and overwrite these files on my /system/bin and /system/lib partition. After reboot, i'm able to install Xposed framework.
The Xposed apk don't work on this new version because the new security patch.
Click to expand...
Click to collapse
First of all thanks for the guide, however i dun have "app_process32 from /system/bin and libandroid_runtime.so from /system/lib, from 2.22.40.53 firmware"
Can you pls provide to us or send the link so that i can fix the Xposed problem in my phone.
Thanks in advance.

williamstans said:
First of all thanks for the guide, however i dun have "app_process32 from /system/bin and libandroid_runtime.so from /system/lib, from 2.22.40.53 firmware"
Can you pls provide to us or send the link so that i can fix the Xposed problem in my phone.
Thanks in advance.
Click to expand...
Click to collapse
Here: https://www.mediafire.com/?gq97065u1sfw62r
Try these files

leonardohenrique10 said:
Here:
Try these files
Click to expand...
Click to collapse
Thanks!!! :good:

leonardohenrique10 said:
Download Root Explorer from Google Play, open it, go to /system and "Mount as R/W"
Now try to copy the files.
I didn't get any error while replace these files, except when I reboot (if I use the wrong files).
Click to expand...
Click to collapse
im allready open it, but i can't copy paste this file, the command is only extract this.. how can i copy paste it?
Thanks in advance

Kenth_Jr said:
im allready open it, but i can't copy paste this file, the command is only extract this.. how can i copy paste it?
Thanks in advance
Click to expand...
Click to collapse
Extract first
Then take the files one by one, and replace on the correct folder.

leonardohenrique10 said:
Extract first
Then take the files one by one, and replace on the correct folder.
Click to expand...
Click to collapse
my zenfone got bootlop