After flashing twrp ( used flashify ) on f320k11c cannot boot into recovery and black screen !!
how to solve it ?
thanks
letian lotte said:
after flashing twrp ( used flashify ) on f320k11c cannot boot into recovery and black screen !!
How to solve it ?
Thanks
Click to expand...
Click to collapse
found solution in other post
flash kdz ... Back to f320k 10m
then
root again , flash twrp by flashify
succeed !!
Yes you cant have it with the newwer firmware yet.
Related
Hi Guys
I'm on a note 3 n9005 a d have installed the lollipop firmware by the method shown here
http://forum.xda-developers.com/galaxy-note-3/general/guide-t2983873
but now since I have flashed CWM recovery all it tells me is Could not boot normal and goes back to download mode. Normal booting of the phone works fine.
Can anyone help with this ?
Thanks
Richie
Flash the latest version of TWRP (2.8.5).
how did you install cwm? Try using twrp flash it using pc odin.
Thanks for getting back to my guys.
I eventually flashed TW on and it worked then tried using ROM manager to put CWM on. All this got me was a recovery loop.
The problem I have is I have a CWM backup of my phone and want to restore it but cant using TW.
Any thoughts on how to get CWM working on the phone ?
is there any 2.8.5 TWRP for SM 9005?
I cant find any...
Greatdane said:
is there any 2.8.5 TWRP for SM 9005?
I cant find any...
Click to expand...
Click to collapse
C'mon... you can do better than that...
hi all !
my phone is NOTE4F ..n910F ...ir root my phone by cf root...my android version is 5.0.1
after root when i install recovery ( twrp or CWM ) when go to recovery ... set warrnty : recovery... and go to recovery
when install custom rom ... after restart ...set warntty : kernel ! and reset my phone (boot loop !)
plz help me ! i tired to note 4 !!!
SAMAN_SAM said:
hi all !
my phone is NOTE4F ..n910F ...ir root my phone by cf root...my android version is 5.0.1
after root when i install recovery ( twrp or CWM ) when go to recovery ... set warrnty : recovery... and go to recovery
when install custom rom ... after restart ...set warntty : kernel ! and reset my phone (boot loop !)
plz help me ! i tired to note 4 !!!
Click to expand...
Click to collapse
Please provide a better explanation. This makes no sense.
Hi .
I installed BOG6 rom on my G900H . after some time i wipe all my data and try install custom rom that i installed it before .
after reboot my phone won't boot .
i try install another recovery but no recovery except TWRP v2.8.7 won't boot.
so only one recovery and one rom work on my phone and every rom and recovery except this won't boot on my phone. :crying:
Sorry For My Bad Grammer
PN : Custom Rom Boot Properly Previously ...
Once you have TWRP 2.8.7.0 successfully flashed, you should be able to flash any custom rom you want......
Are you certain that the TWRP flash is 100% successful?
Edit.....just noticed you have the H variant of the device......
This is the only TWRP you can use.....
TWRP for H variant by PlayfulGod
http://forum.xda-developers.com/showthread.php?t=2725939
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
Once you have TWRP 2.8.7.0
successfully flashed, you should be able to flash any custom rom you want......
Are you certain that the TWRP flash is 100% successful?
Edit.....just noticed you have the H variant of the device......
This is the only TWRP you can use.....
TWRP for H variant by PlayfulGod
http://forum.xda-developers.com/showthread.php?t=2725939
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
i test it . it won't boot . my phone stuck on samsung logo.
My Phone stuck on samsung logo when :
i flash cwm or philz or twrp of @Fevax or any other recovery except MehdiMayadi's twrp and i want boot into recovery
when i flash rom's like Fevax's CM (12 or 13) and i want boot into it.
PN : i flash cm 12 of Fevax Previously and it boot properly
I Use this : http://forum.xda-developers.com/gal...p-porting-twrp-v2-8-6-0-beta-release-t3085458 previously ..
I Solve Problem .
tnx every body
How?
A.Arani said:
I Solve Problem .
tnx every body
Click to expand...
Click to collapse
Please describe it so other can do the same if they have same as you :fingers-crossed:
somadsul said:
Please describe it so other can do the same if they have same as you :fingers-crossed:
Click to expand...
Click to collapse
It's All My Fault .
Flash custom rom need Base firmware so you must not wipe system and boot
A.Arani said:
It's All My Fault .
Flash custom rom need Base firmware so you must not wipe system.
Click to expand...
Click to collapse
What? SYSTEM is the ROM, when you flash a custom ROM, you 100% replace SYSTEM
No idea what you've been doing, but you do not need system to flash custom
*Detection* said:
What? SYSTEM is the ROM, when you flash a custom ROM, you 100% replace SYSTEM
No idea what you've been doing, but you do not need system to flash custom
Click to expand...
Click to collapse
I seriously don't know . But it's happend to me
There are soo many variants of samsung galaxy grand prime and therefore I'm confused to find twrp recovery for my phone.
My phone details.
Samsung Galaxy Grand Prime
SM G530H
Baseband version : G530HXCU1BPB1
Someone please help me to find stable twrp recovery for my device.
Also tell me what happens if I installs twrp recovery of other variat of samsung grand prime.
Regards
Hi
You have Fortunve3g , you have to flash Fortuna3g's Twrp because there isn't any Twrp for fortunve3g.
https://dl.twrp.me/fortuna3g/twrp-3.4.0-0-fortuna3g.img.tar
But after flashing this with Odin or whatever , you should flash this one with Twrp ( pitch black recovery for fortunve3g ):
https://forum.xda-developers.com/grand-prime/development/unofficial-pbrp-grand-prime-t4048881/amp/
If you install the wrong recovery, when you boot the phone into recovery, your phone will go into download mode. Of course, this does not happen in some close models, but some errors will happen during the installation of custom roms .
Feoder said:
You have Fortunve3g , you have to flash Fortuna3g's Twrp because there isn't any Twrp for fortunve3g.
https://dl.twrp.me/fortuna3g/twrp-3.4.0-0-fortuna3g.img.tar
But after flashing this with Odin or whatever , you should flash this one with Twrp ( pitch black recovery for fortunve3g ):
https://forum.xda-developers.com/grand-prime/development/unofficial-pbrp-grand-prime-t4048881/amp/
If you install the wrong recovery, when you boot the phone into recovery, your phone will go into download mode. Of course, this does not happen in some close models, but some errors will happen during the installation of custom roms .
Click to expand...
Click to collapse
Thanks for replying...but!
If I install twrp fortuna3g recovery will it run stable and why should i need to flash black pitch recovery using twrp fortuna3g recovery.
BTW I've downloaded this file
https://androidfilehost.com/?fid=962157660013068307
Will it work or I should try your method?
Regards
kamran112 said:
Thanks for replying...but!
If I install twrp fortuna3g recovery will it run stable and why should i need to flash black pitch recovery using twrp fortuna3g recovery.
BTW I've downloaded this file
https://androidfilehost.com/?fid=962157660013068307
Will it work or I should try your method?
Regards
Click to expand...
Click to collapse
I already told you why.
Well, I didn't know about this file, flash it , it's work.
I can't seem to install a custom recovery. I've rooted my note 3. I don't know if my bootloader is already unlocked. I have the international exynos version. When I try to flash twrp or cwm it says the flash is successful. But when I try to boot into recovery I get a crashing android sign for less than a second, and then goes into the regular android recovery.
Like I said, I don't know if the bootloader is unlocked. When I try to unlock the bootloader through adb it says that command is not recognized: fastboot unlock oem.
I hope someone can give me some advice, thanks!
What model , check under battery .
What TWRP are you flashing ?
Twrp is on twrp.me
JJEgan said:
What model , check under battery .
What TWRP are you flashing ?
Twrp is on twrp.me
Click to expand...
Click to collapse
Hi! Thank you for your response. The model is N9005. I tried to flash twrp and cwd through their official apps. Twrp is currently 3.4.0-0-ha3g.img
Please use twrp only flash via Odin as per all instructions on here .
Its a tar file
JJEgan said:
Please use twrp only flash via Odin as per all instructions on here .
Its a tar file
Click to expand...
Click to collapse
When I flash twrp with Odin and I try to boot into the custom recovery, I get the following screen:
How are you booting to recovery ??
Viccoms said:
When I flash twrp with Odin and I try to boot into the custom recovery, I get the following screen:
Click to expand...
Click to collapse
you flashed the wrong variant
you have hlte(n9005) but you attempted to flash ha3g (n900)variant
download here: https://dl.twrp.me/hlte
r0mushii said:
you flashed the wrong variant
you have hlte(n9005) but you attempted to flash ha3g (n900)variant
download here: https://dl.twrp.me/hlte
Click to expand...
Click to collapse
Wow that was quite foolish of me. Thank you for your help, this worked!