Hi .
I installed BOG6 rom on my G900H . after some time i wipe all my data and try install custom rom that i installed it before .
after reboot my phone won't boot .
i try install another recovery but no recovery except TWRP v2.8.7 won't boot.
so only one recovery and one rom work on my phone and every rom and recovery except this won't boot on my phone. :crying:
Sorry For My Bad Grammer
PN : Custom Rom Boot Properly Previously ...
Once you have TWRP 2.8.7.0 successfully flashed, you should be able to flash any custom rom you want......
Are you certain that the TWRP flash is 100% successful?
Edit.....just noticed you have the H variant of the device......
This is the only TWRP you can use.....
TWRP for H variant by PlayfulGod
http://forum.xda-developers.com/showthread.php?t=2725939
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
Once you have TWRP 2.8.7.0
successfully flashed, you should be able to flash any custom rom you want......
Are you certain that the TWRP flash is 100% successful?
Edit.....just noticed you have the H variant of the device......
This is the only TWRP you can use.....
TWRP for H variant by PlayfulGod
http://forum.xda-developers.com/showthread.php?t=2725939
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
i test it . it won't boot . my phone stuck on samsung logo.
My Phone stuck on samsung logo when :
i flash cwm or philz or twrp of @Fevax or any other recovery except MehdiMayadi's twrp and i want boot into recovery
when i flash rom's like Fevax's CM (12 or 13) and i want boot into it.
PN : i flash cm 12 of Fevax Previously and it boot properly
I Use this : http://forum.xda-developers.com/gal...p-porting-twrp-v2-8-6-0-beta-release-t3085458 previously ..
I Solve Problem .
tnx every body
How?
A.Arani said:
I Solve Problem .
tnx every body
Click to expand...
Click to collapse
Please describe it so other can do the same if they have same as you :fingers-crossed:
somadsul said:
Please describe it so other can do the same if they have same as you :fingers-crossed:
Click to expand...
Click to collapse
It's All My Fault .
Flash custom rom need Base firmware so you must not wipe system and boot
A.Arani said:
It's All My Fault .
Flash custom rom need Base firmware so you must not wipe system.
Click to expand...
Click to collapse
What? SYSTEM is the ROM, when you flash a custom ROM, you 100% replace SYSTEM
No idea what you've been doing, but you do not need system to flash custom
*Detection* said:
What? SYSTEM is the ROM, when you flash a custom ROM, you 100% replace SYSTEM
No idea what you've been doing, but you do not need system to flash custom
Click to expand...
Click to collapse
I seriously don't know . But it's happend to me
Related
So my note 3 n9005 always comes up with an error whenever I try installing custom roms. Even with Cwm or Phil touch recovery my phone gets bricked. Any help
Insayn29 said:
So my note 3 n9005 always comes up with an error whenever I try installing custom roms. Even with Cwm or Phil touch recovery my phone gets bricked. Any help
Click to expand...
Click to collapse
What error what roms ??
Usual story is wrong rom for phome model .
JJEgan said:
What error what roms ??
Usual story is wrong rom for phome model .
Click to expand...
Click to collapse
File package not supported if I remember correctly. I am on stock lollipop rom rooted
Check phone model by booting to download mode first .
Sent from my SM-N930F using XDA-Developers Legacy app
Rom should be zip file and flashed as zip through custom recovery .
JJEgan said:
Check phone model by booting to download mode first .
Rom should be zip file and flashed as zip through custom recovery .
Click to expand...
Click to collapse
Yeah i have the correct model for custom rom and everything foes fine till when it reaches the end of installation it comes up an error. I installed cwm and it bricked my phone so its back to lollipop stock rom rooted. Do i need to unlock or install anything else to make it work
I installed cwm and it bricked my phone
thats not possible unless you flash wrong stuff .
what file are you using ??
Insayn29 said:
Yeah i have the correct model for custom rom and everything foes fine till when it reaches the end of installation it comes up an error. I installed cwm and it bricked my phone so its back to lollipop stock rom rooted. Do i need to unlock or install anything else to make it work
Click to expand...
Click to collapse
Are trying to flash custom roms using the stock recovery ?
zlazaar said:
Are trying to flash custom roms using the stock recovery ?
Click to expand...
Click to collapse
No when I manage to get Cwm on my phone I use that then when rebooting phone it goes back to stock recovery
JJEgan said:
I installed cwm and it bricked my phone
thats not possible unless you flash wrong stuff .
what file are you using ??
Click to expand...
Click to collapse
I use rom manager to flash my Cwm. If flashes fine then when I reboot phone it goes back to stock recovery then into download mode
Insayn29 said:
No when I manage to get Cwm on my phone I use that then when rebooting phone it goes back to stock recovery
Click to expand...
Click to collapse
In certain cases, custom recovery won't stick after reboot. The stock firmware will replace it.
Best procedure is to untick "Auto-reboot" in odin and flash TWRP or Phil'z, then manually reboot directly to recovery.
<I use rom manager to flash my Cwm>
Thats your problem . Dont use rom manager at all .Multiple identical posts on the forum .
TWRP is better than CWM, in my opinion. More custom ROMs seem to be more compatible for some reason with TWRP.
2.8.7 to be on the safe side
i tried to flash twrp 3.0 on my smn9005 HLTE but when i try to boot recovery it says
Booting Recovery
Bit Set Warratnyy: Recovery
then black screen apeears mobile vibrate 2 time and then retart as normal my phone is not bricked then i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom it gives error 3004, this rom is for HLTE, HLTEXX etc, what should i do my phone is currently running on stock LP 5.0 and i am 100% sure my phone is HLTE, HLTEXX but new twrp wont work and on older i cannot install any rom even after advance wipe
<i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom
ANY really or just one or two ??
2.8.70 works fine on roms but not for later ports .( see multiple posts)
If you need a later twrp .
Flash 2.8.7.0 then through TWRP flash later TWRP zip.
JJEgan said:
<i tried twrp 2.8.7.0 it worked fine but i am not able to install any cutom rom
ANY really or just one or two ??
2.8.70 works fine on roms but not for later ports .( see multiple posts)
If you need a later twrp .
Flash 2.8.7.0 then through TWRP flash later TWRP zip.
Click to expand...
Click to collapse
thank you for reply, i tried to flash twrp 3.0.zip with twrp 2.8.7.0 but i came up with same issue untill now i have tried
Potato chips(pie), AOSP 9.0 extended all failed to flash in twrp 2.8.7.0 , i cant understand why it is happening now i am flashing repair firmware then i will try it back if it fails then i will downgrade to stock 4.4 again try, i also tried Linegae 14.1 it flashed succesfully but caused bootlops now i am again back to stock
i think i cannot upgrade more from 6.0 now i am downloading TouchWiz MM :crying: :crying:
lastwarning91 said:
thank you for reply, i tried to flash twrp 3.0.zip with twrp 2.8.7.0 but i came up with same issue untill now i have tried
Potato chips(pie), AOSP 9.0 extended all failed to flash in twrp 2.8.7.0 , i cant understand why it is happening now i am flashing repair firmware then i will try it back if it fails then i will downgrade to stock 4.4 again try, i also tried Linegae 14.1 it flashed succesfully but caused bootlops now i am again back to stock
Click to expand...
Click to collapse
When u flash new TWRP first time ,backup your efs (imei,modem).
Second with TWRP 2.8.7.0 u can only flash stock Samsung rom that have aroma support.
Only TWRP 3.2.3.0, this is the latest can flash Oreo ,pie ,nougat roms without issue. But remember u can't flash Samsung roms with this and u have to go back to twrp 2.8.7. Then go back to 3.2 if u wanna flash pie ect roms
Hi all
I can successfully flash twrp-2.8.7.0-hlte-4.4.img.tar and boot into recovery.
But later TWRP,s dont boot.
JJEgan says to flash 2.8.70 and if you need a later twrp flash 2.8.7.0 then through TWRP flash later TWRP.zip.
Question is where can i get a zip of the latest TWRP. The official releases are either img or tar
Thanks
grwalker said:
Hi all
I can successfully flash twrp-2.8.7.0-hlte-4.4.img.tar and boot into recovery.
But later TWRP,s dont boot.
JJEgan says to flash 2.8.70 and if you need a later twrp flash 2.8.7.0 then through TWRP flash later TWRP.zip.
Question is where can i get a zip of the latest TWRP. The official releases are either img or tar
Thanks
Click to expand...
Click to collapse
The Twrp are always .img.tar or .img or even apk from play store https://play.google.com/store/apps/details?id=me.twrp.twrpapp. Anyway, i flashed twrp 3.2.3.0 from 2.8.7.0 ( the same one you had ) using Odin 3.11.1 without a single problem! Mybe the problem is just the Odin's version you used, have a look here too to better understand https://www.theandroidsoul.com/how-to-install-twrp-recovery-using-odin/. I hope you can solve it, good luck.
Thanks
When using 2.8.7.0 to flash latest TWRP.img, did you flash to boot or recovery? I get those choices after i select the file to flash. I assume recovery, right?
************ - -UPDATE - -*****************
Flashed img to recovery. All good, said flashing successful . . .but
Tried to reboot to new recovery but got the same boot loop.
Flashed 2.8.7.0 again using ODIN and 2.8.7.0. booted up just fine.
Re flashed 3.2.3.0 from 2.8.7.0. Again the same boot loop
Went back to 2.8.7.0 using ODIN. Booted up.
no idea what to do next
Thanks
I have same issues towards my hlte, twrp ver release later than what you indicated causes recovery boot loops, only 2.8 works. I cant even install custom rom due to unupdated twrp support.
echo-26 said:
I have same issues towards my hlte, twrp ver release later than what you indicated causes recovery boot loops, only 2.8 works. I cant even install custom rom due to unupdated twrp support.
Click to expand...
Click to collapse
You need to read first.
TWRP cannot flash Aroma based roms after 2.8 as per multiple posts .
Later android based roms use later TWRP 3 versions all posted .
Hi everyone I've been having trouble booting my G975F since I flashed latest firmware in Odin. I've done a factory reset in recovery and wipe cache after i flashed it but I get
#reboot recovery cause BL: recovery mode set by key#
Supported API: 3
MANUAL MODE v1.0.00#
Any help would be greatly appreciated!
Did you already fixed this i have the same problem after flashing back to stock
mpjjansen said:
Did you already fixed this i have the same problem after flashing back to stock
Click to expand...
Click to collapse
I haven't fixed it yet, I can't flash any lineage based rom or it does a loop in twrp as well..
FreeRunner2017 said:
I haven't fixed it yet, I can't flash any lineage based rom or it does a loop in twrp as well..
Click to expand...
Click to collapse
well i can help you with that i think
download this twrp https://androidfilehost.com/?fid=4349826312261758026 and flash it through ODIN (AP)
then flash a custom rom for example https://forum.xda-developers.com/ga...om-hadesrom-q-stock-v1-0-exynos-s10e-t4058441
and it should work
i need to find out why i can't go to stock
mpjjansen said:
well i can help you with that i think
download this twrp https://androidfilehost.com/?fid=4349826312261758026 and flash it through ODIN (AP)
then flash a custom rom for example https://forum.xda-developers.com/ga...om-hadesrom-q-stock-v1-0-exynos-s10e-t4058441
and it should work
i need to find out why i can't go to stock
Click to expand...
Click to collapse
Yes it does, any stock based will work but no lineage based rom will work.
mpjjansen said:
well i can help you with that i think
download this twrp https://androidfilehost.com/?fid=4349826312261758026 and flash it through ODIN (AP)
then flash a custom rom for example https://forum.xda-developers.com/ga...om-hadesrom-q-stock-v1-0-exynos-s10e-t4058441
and it should work
i need to find out why i can't go to stock
Click to expand...
Click to collapse
Stock based roms work fine its only lineage based roms that won't boot, just keeps rebooting to recovery. . Tried everything.
There are soo many variants of samsung galaxy grand prime and therefore I'm confused to find twrp recovery for my phone.
My phone details.
Samsung Galaxy Grand Prime
SM G530H
Baseband version : G530HXCU1BPB1
Someone please help me to find stable twrp recovery for my device.
Also tell me what happens if I installs twrp recovery of other variat of samsung grand prime.
Regards
Hi
You have Fortunve3g , you have to flash Fortuna3g's Twrp because there isn't any Twrp for fortunve3g.
https://dl.twrp.me/fortuna3g/twrp-3.4.0-0-fortuna3g.img.tar
But after flashing this with Odin or whatever , you should flash this one with Twrp ( pitch black recovery for fortunve3g ):
https://forum.xda-developers.com/grand-prime/development/unofficial-pbrp-grand-prime-t4048881/amp/
If you install the wrong recovery, when you boot the phone into recovery, your phone will go into download mode. Of course, this does not happen in some close models, but some errors will happen during the installation of custom roms .
Feoder said:
You have Fortunve3g , you have to flash Fortuna3g's Twrp because there isn't any Twrp for fortunve3g.
https://dl.twrp.me/fortuna3g/twrp-3.4.0-0-fortuna3g.img.tar
But after flashing this with Odin or whatever , you should flash this one with Twrp ( pitch black recovery for fortunve3g ):
https://forum.xda-developers.com/grand-prime/development/unofficial-pbrp-grand-prime-t4048881/amp/
If you install the wrong recovery, when you boot the phone into recovery, your phone will go into download mode. Of course, this does not happen in some close models, but some errors will happen during the installation of custom roms .
Click to expand...
Click to collapse
Thanks for replying...but!
If I install twrp fortuna3g recovery will it run stable and why should i need to flash black pitch recovery using twrp fortuna3g recovery.
BTW I've downloaded this file
https://androidfilehost.com/?fid=962157660013068307
Will it work or I should try your method?
Regards
kamran112 said:
Thanks for replying...but!
If I install twrp fortuna3g recovery will it run stable and why should i need to flash black pitch recovery using twrp fortuna3g recovery.
BTW I've downloaded this file
https://androidfilehost.com/?fid=962157660013068307
Will it work or I should try your method?
Regards
Click to expand...
Click to collapse
I already told you why.
Well, I didn't know about this file, flash it , it's work.
I can't seem to install a custom recovery. I've rooted my note 3. I don't know if my bootloader is already unlocked. I have the international exynos version. When I try to flash twrp or cwm it says the flash is successful. But when I try to boot into recovery I get a crashing android sign for less than a second, and then goes into the regular android recovery.
Like I said, I don't know if the bootloader is unlocked. When I try to unlock the bootloader through adb it says that command is not recognized: fastboot unlock oem.
I hope someone can give me some advice, thanks!
What model , check under battery .
What TWRP are you flashing ?
Twrp is on twrp.me
JJEgan said:
What model , check under battery .
What TWRP are you flashing ?
Twrp is on twrp.me
Click to expand...
Click to collapse
Hi! Thank you for your response. The model is N9005. I tried to flash twrp and cwd through their official apps. Twrp is currently 3.4.0-0-ha3g.img
Please use twrp only flash via Odin as per all instructions on here .
Its a tar file
JJEgan said:
Please use twrp only flash via Odin as per all instructions on here .
Its a tar file
Click to expand...
Click to collapse
When I flash twrp with Odin and I try to boot into the custom recovery, I get the following screen:
How are you booting to recovery ??
Viccoms said:
When I flash twrp with Odin and I try to boot into the custom recovery, I get the following screen:
Click to expand...
Click to collapse
you flashed the wrong variant
you have hlte(n9005) but you attempted to flash ha3g (n900)variant
download here: https://dl.twrp.me/hlte
r0mushii said:
you flashed the wrong variant
you have hlte(n9005) but you attempted to flash ha3g (n900)variant
download here: https://dl.twrp.me/hlte
Click to expand...
Click to collapse
Wow that was quite foolish of me. Thank you for your help, this worked!