HELP my L7 P708 dosnt pass from the CM10 splash screen - Optimus L3, L5, L7 Q&A, Help & Troubleshooting

Hi, this is my first thread
I been trying to flash my L7 with CM10, finaly i got it but after i do everything that i suppose to do and i restart the phone, it dosnt pass from the splash screen with the animated CM logo, i could leveit there hours and still dosnt go anywhere, i was able to go back to my previus Rom, but it has been 2 times with 2 direrent cm10 Roms, so i want to know what could it be and if theres a solution, or maybe im doing something wrong
this is one of the threads i follow to do it
http://forum.xda-developers.com/showthread.php?t=2396115
tks for the help

your problem is called "bootloop:
you wiped everything before to flash the CM?

Sabyn said:
your problem is called "bootloop:
you wiped everything before to flash the CM?
Click to expand...
Click to collapse
Affirmative this is the secuence i follow
i start o CWM recovery mode, then i made a wipe of user data, cache and devlik
then i install CM10 from zip, though first times didnt install (said error 7) i look around and i was suposed to edit updater-script inside the cm10.zip in order to override the problem with the p700.
after i did this i install then the kernell p708_10102013.zip
finally i reboot and it starts with the LG logo, then the Cyanogenmode splash screen and it just stuck here, dosnt go anyware, just keeps animated like its loading but donst go further

go back in cwm, wipe everything and after flash cm, but without that kernel, maybe that was the problem

Sabyn said:
go back in cwm, wipe everything and after flash cm, but without that kernel, maybe that was the problem
Click to expand...
Click to collapse
id already try diferent metods with kernel, without kernel, wipping unwipping, gapps no gapps, still getting stoped at the same point

chrizvelez said:
id already try diferent metods with kernel, without kernel, wipping unwipping, gapps no gapps, still getting stoped at the same point
Click to expand...
Click to collapse
try another version of cm than

TKS i finally could instal it, it had to be the CM 10.1 with JB 4.2.2, I couldnt get it on the cm 10.2 an jb 4.3 but its ok. Tks again for your help

Related

[HELP][SOLVED] Can't flash, NO IMEI

I tried to install homero's v20a rom,but I didn't liked it.
So I tried to get back to ICS from my NANDroid backup,but i had no signal.
Now I'm trying to roll back tu ICS. The only problem is: when I follow the guide to roll back from CM10 to v10k/Unbricking the phone,this is what i get.
http://puu.sh/2rc5f
PS. The phone can boot in ICS with no signal and everything else works,even wifi.
EDIT: I can even boot in recovery! Why won't KDZ let me flash?
EDIT2: Battery on,PC Software mode: I get the error.
Battery off,emergency mode: I get the error.
I'm thinking of flashing cm10 from recovery but the phone is still booting, I don't want to lose my data if I can solve the problem in another way.
EDIT3: LG Mobile Support Tool says that the phone is connected and needs the update,but if I launch it it says "problem in comunication with the phone"
EDIT4: I did a wipe cache,factory reset and dalvik cache wipe. Still not working and I noticed i have no IMEI!
EDIT5: Flashed the modified version of v10k,i'm back to ICS with my IMEI.
Do you have p700? If yes , where can I find the modified v20k?
Thank you
Shamelna said:
Do you have p700? If yes , where can I find the modified v20k?
Thank you
Click to expand...
Click to collapse
Yes,i have p700.
Follow this and you'll be fine.
Just install cwm again and reflash with cm10

[Q] Cannot install any ROM

Hello,
My u8800 can't install any custom or official rom anymore. I really tried everything, but every single rom gets a bootloop. When I install an official rom via dload it repeats the animated boot screen over and over, and it gets more laggier everytime. I really don't know what to do. The only ROM that still works is Oxygen.
Also when I install 2.3.5 official it will boot the first time, but after a restart a bunch of errors pop up and when I click them away they keep coming back. When I do a factory reset I can boot up, but when I restart the errors come back. This way I cannot root my 2.3.5 and install cwm recovery on it.
When I try to install a rom from oxygen it also results in a bootloop. English is not my main language so I hope you guys will understand. I know the basics of custom roms but there it pretty much ends.
Thanks in advance!
Do you usually wipe Dalvik Cache, Factory Reset, Cache, and System when you install a new custom rom after oxygen?
rqmok said:
Do you usually wipe Dalvik Cache, Factory Reset, Cache, and System when you install a new custom rom after oxygen?
Click to expand...
Click to collapse
Yea i do
Heavy brush official firmware and try again?
zgulia22 said:
Heavy brush official firmware and try again?
Click to expand...
Click to collapse
If that means installing official firmware via the dload folder and pinkscreen mode, then yes. Froyo works fine, and Gingerbread works fine untill I reboot the phone. I get all kind of errors and I can't click them away, they will appear again.
For **** sake this is a WORTHLESS forum
Try hard resetting your phone. Follow steps here:
http://www.hard-reset.com/huawei-u8800-ideos-x5-hard-reset.html
Try FULLFLASH http://forum.xda-developers.com/showthread.php?t=1971266 ( I think, it helps)

[Q] Flashed GE ROM and stuck on google colors animation

I have the international/unlocked i9505 and i rooted via cf auto root and flashed the cwm recovery..
I then flashed the ge rom from here and i setup it all nice until I rebooted when it is just stuck at the google animation (with the four colors in the center) and it just stays there. I left it there for a good hour before I put the phone into the cwm recovery and follows steps like wipe the "d" cache and formatting the /system, and /cache. it still boots the animation.. flashed the rom again and it still hung there...Any help would be much appreciated.
EDIT: If possible, i would rather just flash the official touchwiz rom to avoid more problems down the line.
leowan731 said:
I have the international/unlocked i9505 and i rooted via cf auto root and flashed the cwm recovery..
I then flashed the ge rom from here and i setup it all nice until I rebooted when it is just stuck at the google animation (with the four colors in the center) and it just stays there. I left it there for a good hour before I put the phone into the cwm recovery and follows steps like wipe the "d" cache and formatting the /system, and /cache. it still boots the animation.. flashed the rom again and it still hung there...Any help would be much appreciated.
EDIT: If possible, i would rather just flash the official touchwiz rom to avoid more problems down the line.
Click to expand...
Click to collapse
Reflash, and when your phone gives you the option to `fix` recovery, select no. Then let your phone reboot and install.
leowan731 said:
I have the international/unlocked i9505 and i rooted via cf auto root and flashed the cwm recovery..
I then flashed the ge rom from here and i setup it all nice until I rebooted when it is just stuck at the google animation (with the four colors in the center) and it just stays there. I left it there for a good hour before I put the phone into the cwm recovery and follows steps like wipe the "d" cache and formatting the /system, and /cache. it still boots the animation.. flashed the rom again and it still hung there...Any help would be much appreciated.
EDIT: If possible, i would rather just flash the official touchwiz rom to avoid more problems down the line.
Click to expand...
Click to collapse
How long did it hang for? i was having problems reflshing, my phone hung for about 20 minutes before doing anything the first time i flashed it with google rom. I left it came back thinking it was unseccessful and when i was reading for solution it just booted up. Since then i have had no problems reflashing.
Also as above post suggests, in TWRP recovery after i installed a rom when exiting it would say FIX permissions, when i swiped yes the rom wouldnt boot. now it all seems fine however i think i didnt know what i was doing.
SSThing said:
Reflash, and when your phone gives you the option to `fix` recovery, select no. Then let your phone reboot and install.
Click to expand...
Click to collapse
i just tried it and its still stuck at the animation..
Not sure if this is ok but I'm still stuck so please help? I reflashed and click no. When I rebooted in cwm.

Cant figure out how to install custom rom, without loosing root acces

Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Nepoznati said:
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Click to expand...
Click to collapse
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
antique_sonic said:
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
Click to expand...
Click to collapse
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Nepoznati said:
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Click to expand...
Click to collapse
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
SOLVED
antique_sonic said:
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
Click to expand...
Click to collapse
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Nepoznati said:
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Click to expand...
Click to collapse
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
antique_sonic said:
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
Click to expand...
Click to collapse
It could probably be a problem with TWRP as you mentioned earlier. After using CWM everything went smooth after updating my kernel. Last night I couldnt hold me back to try one more time, and I flashed X-NOTE with TWRP and I got the same problem as described in #1 post. Then I installed CWM and flashed X-NOTE again and everything got messed up. Then I restored everything, force installed the kernel and bootlaoder. After that installed CWM and then I was able to run X-NOTE without any problem.
I am not a professional developer but I may think that the problem is TWRP when it tries to flash the kernel under the process with may results in some problems. When using CWM from the beginning I do not get any problems but when using TWRP I need to restore everything back.

[Q] Factory reset every time ROM update?

Hi!
I use Google edition s4 ROM, and i really like it. But when it receives an update do i have to factory reset everytime? Im on 20150614, with CWM 6,0,4,7.
Id really really appreciate a fast answer
Also, if i wish to switch Kernel from Alucard to Googy-Max, is it ok to Wipe dalvik cache, and then flash kernel?
EDIT: the rom: http://forum.xda-developers.com/showthread.php?t=2557353
bump?
Dirty flashes should be OK, however the ROM thread you linked to should have provided the answer. Regardless, you really should change that recovery to TWRP. Clockworkmod is no longer being supported and people are having difficulty installing some custom ROMs with it.
Wiping cache is fine when changing kernels.
Thanks for the help
Btw. I dont know how to change recoveries? XD. Is it Just using Odin like with cwm? And do i have to remove cwm first / wipe device?
No, u can just flash ur new recovery through cwm
Okay. What is the preferred TWRP? Do you possibly have a link ?
Asking because i cannot find the S4 i9505 on their site?
EDIT: I managed to install it via the App they've made. It is much nicer than CWM. Thanks for the help both of you
Ok ive tried to flash 2 different kernels multiple times now.
Tried Googy-Max, and the phone wont boot android ?
Tried Hulk, and it took forever to boot, then rebooted immediately etc.
Am i flashing kernels wrong?, i did dalvik/cache wipe after the flash

Categories

Resources