I tried to install homero's v20a rom,but I didn't liked it.
So I tried to get back to ICS from my NANDroid backup,but i had no signal.
Now I'm trying to roll back tu ICS. The only problem is: when I follow the guide to roll back from CM10 to v10k/Unbricking the phone,this is what i get.
http://puu.sh/2rc5f
PS. The phone can boot in ICS with no signal and everything else works,even wifi.
EDIT: I can even boot in recovery! Why won't KDZ let me flash?
EDIT2: Battery on,PC Software mode: I get the error.
Battery off,emergency mode: I get the error.
I'm thinking of flashing cm10 from recovery but the phone is still booting, I don't want to lose my data if I can solve the problem in another way.
EDIT3: LG Mobile Support Tool says that the phone is connected and needs the update,but if I launch it it says "problem in comunication with the phone"
EDIT4: I did a wipe cache,factory reset and dalvik cache wipe. Still not working and I noticed i have no IMEI!
EDIT5: Flashed the modified version of v10k,i'm back to ICS with my IMEI.
Do you have p700? If yes , where can I find the modified v20k?
Thank you
Shamelna said:
Do you have p700? If yes , where can I find the modified v20k?
Thank you
Click to expand...
Click to collapse
Yes,i have p700.
Follow this and you'll be fine.
Just install cwm again and reflash with cm10
Related
Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Dataking said:
Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Click to expand...
Click to collapse
Go to recovery and try wipe cache dalvik and fix permissions and reboot should work fine
.
Wipe Dalvik cache shows error: FAILED
Dataking said:
Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Click to expand...
Click to collapse
Install Philz Touch recovery in downloadmode, this will help you http://d-h.st/wSF.
I reflashed Philz Touch with ODIN successfully but the recovery mode did not came up. How is this possible? Back to TWRP now with same problems......
If you already have the omega 9 rom in your phone...try to reflash it via recovery .....don't have to wipe data....but do it to be safe....I think it should work...I really hope it works...sorry about your phone
sadeshmagic said:
If you already have the omega 9 rom in your phone...try to reflash it via recovery .....don't have to wipe data....but do it to be safe....I think it should work...I really hope it works...sorry about your phone
Click to expand...
Click to collapse
Already flashed it several times but still hanging in the boot and no way to use the phone.
Dataking said:
Already flashed it several times but still hanging in the boot and no way to use the phone.
Click to expand...
Click to collapse
Well the only other option is to download a ROM that can be flashed via Odin.....hopefully your download mode works.....i think you can find several compatible ROMs in the forums.....try that out....as a last resort
sadeshmagic said:
Well the only other option is to download a ROM that can be flashed via Odin.....hopefully your download mode works.....i think you can find several compatible ROMs in the forums.....try that out....as a last resort
Click to expand...
Click to collapse
Well, download mode works fine, TWRP works fine, flashing ROM works fine, ROM itselfs works great, until i have to reboot. After booting it hangs in the boatloader and i have to flash rom again.........................to get access.
Dataking said:
Well, download mode works fine, TWRP works fine, flashing ROM works fine, ROM itselfs works great, until i have to reboot. After booting it hangs in the boatloader and i have to flash rom again.........................to get access.
Click to expand...
Click to collapse
Well do you merely flash the ROM? try wiping cache afterwards and setting permission....if that doesn't work try to reflash stock firmware....thats your best bet
:good::good::good::good:
I found the solution using method 3:
http://www.ibtimes.co.uk/articles/4...i9500-gti9505-unbrick-softbrick-hardbrick.htm
This will help some other people too.
Hi, this is my first thread
I been trying to flash my L7 with CM10, finaly i got it but after i do everything that i suppose to do and i restart the phone, it dosnt pass from the splash screen with the animated CM logo, i could leveit there hours and still dosnt go anywhere, i was able to go back to my previus Rom, but it has been 2 times with 2 direrent cm10 Roms, so i want to know what could it be and if theres a solution, or maybe im doing something wrong
this is one of the threads i follow to do it
http://forum.xda-developers.com/showthread.php?t=2396115
tks for the help
your problem is called "bootloop:
you wiped everything before to flash the CM?
Sabyn said:
your problem is called "bootloop:
you wiped everything before to flash the CM?
Click to expand...
Click to collapse
Affirmative this is the secuence i follow
i start o CWM recovery mode, then i made a wipe of user data, cache and devlik
then i install CM10 from zip, though first times didnt install (said error 7) i look around and i was suposed to edit updater-script inside the cm10.zip in order to override the problem with the p700.
after i did this i install then the kernell p708_10102013.zip
finally i reboot and it starts with the LG logo, then the Cyanogenmode splash screen and it just stuck here, dosnt go anyware, just keeps animated like its loading but donst go further
go back in cwm, wipe everything and after flash cm, but without that kernel, maybe that was the problem
Sabyn said:
go back in cwm, wipe everything and after flash cm, but without that kernel, maybe that was the problem
Click to expand...
Click to collapse
id already try diferent metods with kernel, without kernel, wipping unwipping, gapps no gapps, still getting stoped at the same point
chrizvelez said:
id already try diferent metods with kernel, without kernel, wipping unwipping, gapps no gapps, still getting stoped at the same point
Click to expand...
Click to collapse
try another version of cm than
TKS i finally could instal it, it had to be the CM 10.1 with JB 4.2.2, I couldnt get it on the cm 10.2 an jb 4.3 but its ok. Tks again for your help
My OP2 is currently 100% stock, never rooted, and is running Oxygen OS 2.2.1. I have tried OTAing, flashing dirty and clean but the phone itself keeps getting the boot loop logo (Powered by Android screen with the capacity buttons off). I have enabled google apps so I'm not sure what is causing the bootloop. A history of my phone is that on 2.1.0, I tried updating the phone via OTA and I would get "Installation failed" once the entire bar finishes in Recovery. The same thing happened for 2.2.0 > 2.2.1 so I had to dirty flash the phone, otherwise I would get "Installation failed".
I keep a spare file of 2.2.1 off of Oneplus' download site so whenever this boot loop occurs, I turn the phone off and go into recovery > install from downloads > and flash the 2.2.1.
Try this ? http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Djarenga said:
Try this ? http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Click to expand...
Click to collapse
My phone isn't bricked
bump
willy156 said:
My phone isn't bricked
Click to expand...
Click to collapse
Is it, if you can't boot it up.
serkka8 said:
Is it, if you can't boot it up.
Click to expand...
Click to collapse
Hi, my phone is on 2.2.1 fine. but every time i try to update (ota shows me 3.1.0) i get a boot loop
I just tried the 3.1.0 OTA and my phone got stuck on the Powered by android screen. I had to turn the phone off and go into recovery and flashed my 2.2.1 file to unbrick myphone.
try the full rom zip intead of the OTA.
NickRuler said:
try the full rom zip intead of the OTA.
Click to expand...
Click to collapse
with or without wiping data/cache first? I'll try the 3.1.0 full zip file flashing next. think ill try to factory reset after
willy156 said:
with or without wiping data/cache first? I'll try the 3.1.0 full zip file flashing next. think ill try to factory reset after
Click to expand...
Click to collapse
Try it without wiping first. If it works , you wont lose your data.
Edit: If you dont mind losing your data, I would suggest that you use this
http://forum.xda-developers.com/oneplus-2/general/guide-official-op2-stock-reset-to-oos-3-t3402020
This will flash OxygenOS 3.0.2 and restore all partitions to stock.
This should also solve your OTA problems.
Title says it all. Fastboot works, flashing works. Even if I try to charge the phone on power off condition, it loops infinitely to splash screen. Tried flashing both custom and official ROMs via fastboot. I don't think this is an emmc problem since I can still format and erase all partitions.
Before all of this, I used the official RR Nougat ROM. Everything works fine until it suddenly bootloops out of thin air.
bakanui said:
Title says it all. Fastboot works, flashing works. Even if I try to charge the phone on power off condition, it loops infinitely to splash screen. Tried flashing both custom and official ROMs via fastboot. I don't think this is an emmc problem since I can still format and erase all partitions.
Before all of this, I used the official RR Nougat ROM. Everything works fine until it suddenly bootloops out of thin air.
Click to expand...
Click to collapse
Flash stock firmware with QFIL
mshoaib7 said:
Flash stock firmware with QFIL
Click to expand...
Click to collapse
I have tried to flash via QFIL, but it stopped midway flashing the system and device won't turn on now
I guess it's just me messing up somehow with the cables or something
Thank you anyway mshoaib7!
https://boycracked.com/2016/02/12/e...rmware-any-android-devices-via-fastboot-mode/
Try this one. May help u. Extract from official ROM. And flash those things. System IMG is not needed if u have any old backup means. Flash use this. Go to recovery and restore old one.
Bcz system image is large, so sumtyms it fails to flash. That's y I said lrave the system data image flashing and restore the backup.
mshoaib7 said:
Flash stock firmware with QFIL
Click to expand...
Click to collapse
@mshoaib7 bro you like idli or dosa??
Give it to service centre
bakanui said:
I have tried to flash via QFIL, but it stopped midway flashing the system and device won't turn on now
I guess it's just me messing up somehow with the cables or something
Thank you anyway mshoaib7!
Click to expand...
Click to collapse
bro use downloader the flash tool which is already given in the stock firmware if still it get stuck in the middle then it is driver problem then format u r pc or use friend pc
how to properly revert back from mm or nougat roms to stock kitkat rom?
I was on cm13 by ed300, then I tried to restore nandroid backup of stock kk via twrp
then my phone stuck on boot logo, only fastboot mode works, then flashed twrp and stock kk rom after some attempts.
So what are the steps to successfully revert back to kk? (in case this problem happens again in future)
2-3 days ago I successfully rooted my Moto E3 power by unlocking bootloader and installing twrp recovery. Yesterday I installed Lineage 14.1 custom Rom (7.1.2) for Moto E3 power from here
https://forum.xda-developers.com/moto-e3/development/rom-lineage-14-1-moto-e3-power-t3610435
The Rom installation was successful. Phone was working fine. But there was some minor lag and screen was appearing to be yellowish. Hence I decided to Factory reset the phone. I tried to reset it from phone settings. The phone switched off and turned on into twrp recovery mode. Then I tried to factory reset through twrp mode. But it is always booting into twrp recovery. I wiped all cache and data including system data and flashed the above Rom again. But whenever I try to system reboot, it is not booting normally, but always going into twrp mode.
Please provide solution for the issue with appropriate information and links.
Thanks.
Beauause u delete the all ROM
For Reset phone -: not need to wipe system and boot.. Only do a factory reset
Rupi Singh said:
Beauause u delete the all ROM
For Reset phone -: not need to wipe system and boot.. Only do a factory reset
Click to expand...
Click to collapse
Yes, I know that
I had done just factory reset earlier, but after that it kept on booting into recovery mode everytime I reboot the phone. Then I cleared system data to flash the ROM again. I should have done factory reset through recovery mode rather than from phone settings.
Flash a sp flash ROM without format... And again try twrp and custom ROM
Rupi Singh said:
Flash a sp flash ROM without format... And again try twrp and custom ROM
Click to expand...
Click to collapse
yes, already did same thing today. it worked fine and i successfully installed stock rom again.
sid100 said:
yes, already did same thing today. it worked fine and i successfully installed stock rom again.
Click to expand...
Click to collapse
Hi,
Would be great if you can share step by step process on how you recovered. Am also facing the same issue. Have factory reseted my phone and now its booting only to TWRP recovery mode. Am on Mac. Can try to get a Windows Laptop if required.
Awaiting you response.
Thanks in advance!
question?
Rupi Singh said:
Flash a sp flash ROM without format... And again try twrp and custom ROM
Click to expand...
Click to collapse
can you elaborate this ?
What do you mean by Sp flash ROM.?
Do it mean stock rom?
or i have to install sp flash tool in my computer then install stock rom?
if i have twrp install if than i can use it to install stock rom?
Please reply fast.
my phone is as good as dead now.
Ansh Vijay said:
can you elaborate this ?
What do you mean by Sp flash ROM.?
Do it mean stock rom?
or i have to install sp flash tool in my computer then install stock rom?
if i have twrp install if than i can use it to install stock rom?
Please reply fast.
my phone is as good as dead now.
Click to expand...
Click to collapse
I have got the same problem bro. If I can recover from the situation somehow, I'll update it here.
Have an update!
Ben_android enthusiast said:
I have got the same problem bro. If I can recover from the situation somehow, I'll update it here.
Click to expand...
Click to collapse
Update: Don't know if you still need the solution, but I am gonna share my info. Although as the phone you were talking about must be Moto E3, my phone is Lenovo K3 Note, but the processor should basically be the same, as both runs on Mediatek processors. And for the same reason, they both would use the SP Flash Tool to flash a ROM. You'll need to download the Stock ROM file for your moto E3, and flash it through SP flash tool installed on your computer. You'll get the tutorials on youtube. When the stock ROM is flashed, the phone will start with your stock ROM. I have had my phone do the same and it is fine now.
Ben_android enthusiast said:
I have got the same problem bro. If I can recover from the situation somehow, I'll update it here.
Click to expand...
Click to collapse
Yes i recovered from the situation.
You just had to download the sp flash tool and the stock ROM for your respective phone, and flash it . Remember for the above problem you just have to use the "download only" option in your sp flash tool and it will work. if you use "format all+download"
you will left by losing imei number of your phone and then you have to follow other procedure to fix that. but according to me your phone will start by choosing download only.