Hello,
My u8800 can't install any custom or official rom anymore. I really tried everything, but every single rom gets a bootloop. When I install an official rom via dload it repeats the animated boot screen over and over, and it gets more laggier everytime. I really don't know what to do. The only ROM that still works is Oxygen.
Also when I install 2.3.5 official it will boot the first time, but after a restart a bunch of errors pop up and when I click them away they keep coming back. When I do a factory reset I can boot up, but when I restart the errors come back. This way I cannot root my 2.3.5 and install cwm recovery on it.
When I try to install a rom from oxygen it also results in a bootloop. English is not my main language so I hope you guys will understand. I know the basics of custom roms but there it pretty much ends.
Thanks in advance!
Do you usually wipe Dalvik Cache, Factory Reset, Cache, and System when you install a new custom rom after oxygen?
rqmok said:
Do you usually wipe Dalvik Cache, Factory Reset, Cache, and System when you install a new custom rom after oxygen?
Click to expand...
Click to collapse
Yea i do
Heavy brush official firmware and try again？
zgulia22 said:
Heavy brush official firmware and try again？
Click to expand...
Click to collapse
If that means installing official firmware via the dload folder and pinkscreen mode, then yes. Froyo works fine, and Gingerbread works fine untill I reboot the phone. I get all kind of errors and I can't click them away, they will appear again.
For **** sake this is a WORTHLESS forum
Try hard resetting your phone. Follow steps here:
http://www.hard-reset.com/huawei-u8800-ideos-x5-hard-reset.html
Try FULLFLASH http://forum.xda-developers.com/showthread.php?t=1971266 ( I think, it helps)
Related
intalled AOSP Paradise and gapps on my defy(green lense) and everything seems to be working great except:
1. everytime i turn my phone off when i turn it back on the Mokee logo comes up 1st and then it loads AOSP fine but i have to re-enter all my google info
2. it doesn't save any of my settings.
3. it wont let me download any apps...they start downloading but just sit there downloading and if they do finish, it says cant install, not enough memory but i reformatted the sd partition in recovery before installing AOSP because i knew it didnt have enough memory to even install it.
4. Why does that Mokee screen come on still?
i had the Mokee ROM before but shouldnt that have gone away when i wiped data and cache?
Did i do something wrong on install? i did wipe data/factory reset, wipe cache, flashed ROM, flashed gapps, wipe dalvik cache and rebooted twice. it loads fine and everything seems to be working but i dont like having to start from scratch everytime i turn my phone on.
Help pls...frustrating
Try clean install as said in this thread.
forum.xda-developers.com/showthread.php?p=32093770#post32093770
Make sure you flash new rom before rebooting
Flash SBF and then Flash new ROM
[Q]AOSP Paradise
Euro_Rules said:
Flash SBF and then Flash new ROM
Click to expand...
Click to collapse
ok that fixed boot screen but not the redoing of google, downloading apps or saving settings...any other suggestions?:fingers-crossed:
i figured it out! i was missing the firmware from when i bricked it...so, i found a firmware file, flashed it and now it works like a charm!! yay
Moved to Q&A. Please ask all questions there.
Hi, this is my first thread
I been trying to flash my L7 with CM10, finaly i got it but after i do everything that i suppose to do and i restart the phone, it dosnt pass from the splash screen with the animated CM logo, i could leveit there hours and still dosnt go anywhere, i was able to go back to my previus Rom, but it has been 2 times with 2 direrent cm10 Roms, so i want to know what could it be and if theres a solution, or maybe im doing something wrong
this is one of the threads i follow to do it
http://forum.xda-developers.com/showthread.php?t=2396115
tks for the help
your problem is called "bootloop:
you wiped everything before to flash the CM?
Sabyn said:
your problem is called "bootloop:
you wiped everything before to flash the CM?
Click to expand...
Click to collapse
Affirmative this is the secuence i follow
i start o CWM recovery mode, then i made a wipe of user data, cache and devlik
then i install CM10 from zip, though first times didnt install (said error 7) i look around and i was suposed to edit updater-script inside the cm10.zip in order to override the problem with the p700.
after i did this i install then the kernell p708_10102013.zip
finally i reboot and it starts with the LG logo, then the Cyanogenmode splash screen and it just stuck here, dosnt go anyware, just keeps animated like its loading but donst go further
go back in cwm, wipe everything and after flash cm, but without that kernel, maybe that was the problem
Sabyn said:
go back in cwm, wipe everything and after flash cm, but without that kernel, maybe that was the problem
Click to expand...
Click to collapse
id already try diferent metods with kernel, without kernel, wipping unwipping, gapps no gapps, still getting stoped at the same point
chrizvelez said:
id already try diferent metods with kernel, without kernel, wipping unwipping, gapps no gapps, still getting stoped at the same point
Click to expand...
Click to collapse
try another version of cm than
TKS i finally could instal it, it had to be the CM 10.1 with JB 4.2.2, I couldnt get it on the cm 10.2 an jb 4.3 but its ok. Tks again for your help
Hello,
Trying to install latest PA 'pa_i9300-5.1-20150528.zip' on Galaxy S3 i9300 using TWRP 2.8.6.1.
Zip installs faster, shows no error.
I select the reboot option, it reboots and sits on PA loading logo
I have been using CM12.1 by JustArchi for some time, thought of giving PA a try.
same here, Im also flashing with TWRP2.8.6.1
The pa_i9300-5.1-20150520 version runs well. But the pa_i9300-5.1-20150528 doesnt. It goes directly to TWRP.
wipe, format, factory reset, redownload rom, reflash,.... dont solve.
The same happens when upgrading from Paranoid_OTA app =/
Same here.
But i'm surprised, you say the pa_i9300-5.1-20150520 run well on your I9300 ?
Can you tell me how you managed to make it work ?
I tried a full swipe then install, didn't had any luck, tried differents gapps with no success.
Can you tell me wich Gapps you use please ?
I had tried 'pa_i9300-5.1-20150520.zip' also, it showed the same behavior.
I don't flash gapps on the first go, I boot with just the rom and later reboot into recovery and load all the zips.
mackhdo said:
But i'm surprised, you say the pa_i9300-5.1-20150520 run well on your I9300 ?
Can you tell me how you managed to make it work ?
I tried a full swipe then install, didn't had any luck, tried differents gapps with no success.
Can you tell me wich Gapps you use please ?
Click to expand...
Click to collapse
I ve just followed a tutorial on the internet.
Boot into TWRP, Format, Wipe Cache/Dalvik/System, Install PA, Install GApps, Wipe Cache/Dalvik, and reboot.
And mine is the 5.1.x mini package from there: http://forum.xda-developers.com/paranoid-android/general/5-1-x-5-0-x-4-4-x-pa-gapps-mirror-t3069879
Unable to BOOT
I did a clean installation of PA 5.1 dated 12/6/15. Gapps did well too. Phone reboots and enters CWM again.. did multiple times but it always jumps to CWM. Any guidance Senior Members.
Pretty sure you have to flash a kernel
naveed8695 said:
I did a clean installation of PA 5.1 dated 12/6/15. Gapps did well too. Phone reboots and enters CWM again.. did multiple times but it always jumps to CWM. Any guidance Senior Members.
Click to expand...
Click to collapse
Having exactly the same problem. I can only get the original 5.1 ROM from may to work, but none of the updates. Tried formatting system, cache, dalvik and even tried flashing the boot.img inside the zip file. No luck ?.
YanN509 said:
Having exactly the same problem. I can only get the original 5.1 ROM from may to work, but none of the updates. Tried formatting system, cache, dalvik and even tried flashing the boot.img inside the zip file. No luck ?.
Click to expand...
Click to collapse
You need to flash a different kernel. The boot.img that ships with the rom keeps getting bored during the build it would appear.
This is covered extensively in the g+ community
Pirateghost said:
You need to flash a different kernel. The boot.img that ships with the rom keeps getting bored during the build it would appear.
This is covered extensively in the g+ community
Click to expand...
Click to collapse
Thank you for the advice. :good:
It worked with Boeffla Kernel 12.1 alpha 3 (but the latest ones did not)
pa_i9300-5.1-20150520.zip works!
texmty said:
same here, Im also flashing with TWRP2.8.6.1
The pa_i9300-5.1-20150520 version runs well. But the pa_i9300-5.1-20150528 doesnt. It goes directly to TWRP.
wipe, format, factory reset, redownload rom, reflash,.... dont solve.
The same happens when upgrading from Paranoid_OTA app =/
Click to expand...
Click to collapse
pa_i9300-5.1-20150520.zip works indeed after wipe: dalvik, cache, data, system. then format.
when it successfully boots, restart into recovery and make backup of only "boot" to external_sd.
then format again and factory reset, then install latest zip (pa_i9300-5.1-20150704.zip).
before reboot first restore "boot" from backup.
Tequila4alvin said:
pa_i9300-5.1-20150520.zip works indeed after wipe: dalvik, cache, data, system. then format.
when it successfully boots, restart into recovery and make backup of only "boot" to external_sd.
then format again and factory reset, then install latest zip (pa_i9300-5.1-20150704.zip).
before reboot first restore "boot" from backup.
Click to expand...
Click to collapse
That worked for me too
Greetings,
I tried to downgrade from Nougat to Marshmallow. If I install stock Nougat ROM via Odin it works. As soon as I install TWRP Recovery and lets say "KryxxOS" it just dont boot. No animated samsung logo just the first static logo and no progress.
If I flash a Nougat based ROM it boots perfectly again.
Anyone might help me there? Am I missing something that I cant downgrade ?
Thanks!
Robin
you can downgrade to Marshmellow.
First back uip your phone as you will lose everything on your phone to downgrade.
using TWRP, go into wipe - advanced and select all the partitions except microsd card.swipe to wipe.
It will delete all the operating system including bootloader and mode. Your phone will have no operating system and will just bootloop if you try to use it.
Then boot into download mode and flash your desired marshmellow rom.
Let odin reboot the phone and you should have a working marshmellow rom on your phone.
You will then need reload all your programs including TWRP.
Make sure that this what you want to do as this advise only and i take no responsibility if you decide to do it.
Cosmic Blue said:
you can downgrade to Marshmellow.
First back uip your phone as you will lose everything on your phone to downgrade.
using TWRP, go into wipe - advanced and select all the partitions except microsd card.swipe to wipe.
It will delete all the operating system including bootloader and mode. Your phone will have no operating system and will just bootloop if you try to use it.
Then boot into download mode and flash your desired marshmellow rom.
Let odin reboot the phone and you should have a working marshmellow rom on your phone.
You will then need reload all your programs including TWRP.
Make sure that this what you want to do as this advise only and i take no responsibility if you decide to do it.
Click to expand...
Click to collapse
Hay,
thanks. I did it exactly as you said. I am able to boot up stock marshmallpow but as soon as I try a custom ROM it just hangs. Tried 2 different...
mautz001 said:
Hay,
thanks. I did it exactly as you said. I am able to boot up stock marshmallpow but as soon as I try a custom ROM it just hangs. Tried 2 different...
Click to expand...
Click to collapse
what custom rtom are you trying to install and did you follow the rom maker instructions exactly.
All you may need to do after flash is do a simple data wipe or cache cleaning to allow the custom rom to work.
Hello, so im stuck now on startup. I actually rooted my phone a week ago and everything's fine until I've downloaded some cracked apks online and restarted my phone. Please help what would i do now
imgur.com/a/07UWA4l
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Paramvir Singh said:
Did you installed Twrp...if yes then you might want clear cache and restart the phone or you could just reflash the rom or any other custom rom....and if you havn't then i am afraid you will have to lose your data..
Click to expand...
Click to collapse
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Never done this on my M1 but on my note edge,
When i got a bootloop, i simply reinstall stock rom, or just clean install custom rom
abcnormal said:
yes yes i've installed twrp, i've actually tried formatting my data, clearing dalvik cache (thru twrp) then restarted it but still stuck at loading zenfone logo. i dont care bout my data on phone, just wanna get my phone back to normal.
can u please elaborate bout reflashing rom? i've never done flashing any rom before , stock or custom,
Click to expand...
Click to collapse
Ok so it's good opportunity to try something new...first you need to download custom rom and gapps package to sd card (always a better option)or internal storage...do the downloads on pc or somewhere else...
1. Wipe cache, dalvik cache, system, vendor, data, internal storage(this one is optional)
2. Mount extsd card
3. Install Rom package...(i personally use xenonhd based on pie) from here https://mirrors.c0urier.net/android...tal/X00T/XenonHD-181007-Experimental-X00T.zip
You can try any other of your choice
4. Install Gapps package from here..http://download2264.mediafire.com/r0vq21tabscg/m1u4llu62bdwyos/BiTGApps-arm64-9.x.x-0.1-unsigned.zip
5. This step is optional if you want root access then flash magisk package from here..https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip and uninstall package from https://github.com/topjohnwu/Magisk/releases/download/v17.2/Magisk-uninstaller-20180921.zip ......after tge rom boot up install magisk manager from https://github.com/topjohnwu/Magisk/releases/download/manager-v6.0.0/MagiskManager-v6.0.0.apk
6. Reboot to system..first boot up will take 4-5 minutes...ENJOY
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
abcnormal said:
so i tried flashing the stock rom but i got an error
Code:
[B] This package is for "ASUS_X00TD" devices; this is a "X00TD"[/B]
i got the rom at asus.com/ph/Phone/ZenFone-Max-Pro-ZB602KL/HelpDesk_BIOS/
i guess i'll try flashing with a custom rom instead?
also a follow up question: is it safe to reboot to recovery with twrp even my phone has no OS installed (already wiped it for flashing a new rom)
Click to expand...
Click to collapse
Stock rom available at asus website is not flashable through twrp...u need twrp flashable zip...download this file...
https://forum.xda-developers.com/showpost.php?p=77671149&postcount=83
And also decrypt file from here.... https://forum.xda-developers.com/asus-zenfone-max-pro-m1/how-to/mod-decrypt-data-t3787311
After flashing the rom...flash decrypt zip
And remember to wipe internal storage after flashing these two zips!
Hello sir i got stuck in bootloop in asus max pro m1
Actually its not showing anything screen is blinking as i try to turn it on. I was on custom rom and suppose to install stock rom and i followed every step but my phone doesn’t start its just reboot and nothing displays anything. Please can anyone tell me the solution of this issue.
did u solved issue
how did u soolves issue ??