Database Users

stuck in recovery mode

Hi!
I ve a problem with my HTC Magic.
This afternoon i want to flash a net ROM on my phone. But i wanted to crate a backup first, so i booted the amonra 1.2.3 recovery image with fastboot boot recovery-RA-magic-v1.2.3H and every thing worked fine , created a back up with nandroid. then i restarted the phone after then i restated it. But id doesent start normaly. It shows th HTC Magic logan then a shot black and the again the logo. After that a warning sign is showed(I figures out that this is the recovery mode). if i restart the phone i always come to the recovery mode. No Fastboot or other.
When i select apply updete.zip in recovery mode i only get the message: no sginature ,verification failed and Cant read MISC(no space left). and thats it.
I have a HTC Magic 32A the SPL was that one with the 09 in the end.
So i have no idea what gone worng and if i can revover my phone.
Can anyone help me??
dekilla

You should be most likely able to recover you phone.
If you take the battery out, then insert it again, then press the back-button and the call-end-button, it won't boot to fastboot? Maybe try volume down + power on, too? It sounds pretty weird...
Florian

Hi
I ve tried fastboot,hboot but nothing happend
Is there any update.zip which could work? I think this is my only chance.
bernd

[Q] Phone is stuck at android logo

My phone wont start up... It stays at the android logo.
I did Vol. down + power on.
then KDZ_FW_UPD and reflashing with the rom but it didnt work. AFter the phone restarts by it self it still stuck at the android logo.
Help me
Type: 3GQCT
PhoneMode: DIAG sometimes i try cs_emergency
Version: nothing
I disabled the android modem
I don't really know which rom it had but i am trying some roms. I baught the phone in carphone warehouse in England (UK in summer 2010.

when your phone stucks on android logo,let it be at there .. connect phone to the computer and try to flash with kdz updater again. (my computer finded phone then [adb device] )

i tried that but after the phone restarts by it self it still stuck at android logo

Try it again and again in cs_emergeny or in standard emergency mode. Delete all LG drivers, boot your device and connect it to your pc. Your Windows will check for drviers and updates automatically. After installing the drivers u can reflash your phone without any issues

what rom you have installed? do you have fastboot or recovery installed there ?

I tried many roms. I tried fastboot,recovery but it still stucks at the android logo after the phone restarts by it self..

before all this hapend i installed app2sd then my phone went very slow and got frozen after i restarted it got stuck at the android logo.

anyone know?

The only thing I know is that I had the same problem...
I tried to flash a UK Vodafone ROM on my NL Vodafone phone, and apparently that didn't work...
The only thing that worked for me was starting the phone into download mode (Volume down, home button and power button, if I recall correctly) and then installing the 2.2.1 OpenSwift ROM via Windows Enabler and KDZ_FW_UPD.
Good luck!

1- Hello you need Press VOLUME UP + HOME + SEARCH buttons, you see the lg logo
2- update wiht Clockwork recovery rom.kdz
the phone started.. you need remove the battery.
3- Put the battery again and then press Power Button+ Camera you see LG logo but whait the screen black its recovery.
Flash wiht Black system by Quarx (extract the .zip in a folder -
open the folder you see fastboot, system and flash, just click on flash)
Sorry for my bad english and i hope this help you

use cis custom rom with fastboot and enter fastboot with Camera+Power and install quarx or recovery and restore from there

redtrooper x said:
My phone wont start up... It stays at the android logo.
I did Vol. down + power on.
then KDZ_FW_UPD and reflashing with the rom but it didnt work. AFter the phone restarts by it self it still stuck at the android logo.
Help me
Type: 3GQCT
PhoneMode: DIAG sometimes i try cs_emergency
Version: nothing
I disabled the android modem
I don't really know which rom it had but i am trying some roms. I baught the phone in carphone warehouse in England (UK in summer 2010.
Click to expand...
Click to collapse
If u r downgrading from CM 6.1.1
try this
http://forum.xda-developers.com/showthread.php?t=887907

jealumalai111462 said:
If u r downgrading from CM 6.1.1
try this
http://forum.xda-developers.com/showthread.php?t=887907
Click to expand...
Click to collapse
Not really downgrading but i will try.
EDIT: Thank you soooooooooo much, i flashed it with the Black system rom and it is working now. My phone was like dead for 1 month and u made it alivee thank u soooooooo much omg.

I'm also having the same problem but no luck yet

You need to factory reset your device if you are downgrading from 2.2/2.3 back to 2.1 etc. Go into fastboot and use the following command
Code:
fastboot -w
fastboot reboot
The boot loop is caused by incompatible data that is on the data + cache partitions. A factory reset will solve most 'android screen' boot loops.
Sent from my iPad

[Q] [q] heelp mee pleaase !!

heei guys .
half a year before I bought the zte blade, and so far it worked well.
but suddenly it stops working ..
whenever I try my cell phone goes immediately to start the red "back" button on (bright red) and then there's the green robot android, then the blue zte intro and then it all over again ..
I have not changed my zte (clockwork, rom)
I know myself well not so good ..
would be really nice if someone could help me ..
I do not know what to do ..!!!
or is it maybe bricked ?!
thanks ..

Its not bricked as it still boots up.
When exactly does the phone crash - when you make a call, start an app, or just automatically reboots?
Did you install a new app just before this started happening?
Is the phone rooted?
Are you sure the battery is ok? Try starting phone with charger plugged in.

ouh ..
yes when i switch the phone on the android boot logo cames then the (blue) zte intro .. and then the zte intro comes again and again ...
noo ..
aahm ? i dont do anything with the pc and the zte ..
so i think i dont root it or something ..
one time there was "ftm" on the screen (after it had this problem).. but i didnt know what this is ..
thank you in front off !!!

but i didnt came anymore to the homescreen , or lock screen

Try booting into recovery and clear the cache? I remember my old G1 did the same thing, and after clearing the system cache it worked.
To boot into recovery i think you keep hold of volume down when turning the device on.
If that doesn't work you could wipe the device, but you'll loose everything on it then.
Sent from my ZTE BLADE using XDA App

The issue you have is this, the rom that has been flashed to the phone is for Gen 2, but the phone is still set on Gen 1.
You'll need to boot into recovery and perform a restore, or flash Ginger stir Fry Rom, then the phone will work.
sent using tapatalk

Solutions depend on
-- whether or not u have custom recovery installed ,
-- whether or not fastboot is enabled in your device. (It isn't enabled only in stock gen2 firmware)
-- whether or not u have rooted and made changes to system partition.
Possible solutions
-- If u have custom recovery installed then format (= wipe data/factory reset) the device from the recovery.
Power off the device. Then by holding volume down power on the device. This takes u into custom recovery menu if it is installed. If custom recovery isn't installed this takes you to FTM MODE.
-- If u have fastboot enabled then use this method to format ur device. Power off the device. Then hold volume up and power on the device. Here the device should stay at green android logo forever if fastboot is enabled. This is fastboot mode. Now install zte USB drivers in PC and connect phone in fastboot mode to PC. It will install the software. Now in device manager u shouldn't see any android named devices with yellow unrecognised format. Then use fastboot windows tools from command prompt. The command to format tthe device is
fastboot erase userdata
-- if the above processes didn't work then using tpt is recommended way. U can flash complete low level device firmware using tpt. U can flash either a recovery alone to hard reset. Or u can flash a complete rom. On bit searching at modaco u will get more information regarding everything.
Sent from my Blade using XDA App

THANK YOU !!
but i dont understand that things .. ?!
can you explain me your answer for people do not understand much of it ?

Download gen1 to gen2 (there is a download link in this section) http://forum.xda-developers.com/showthread.php?t=1258855
Unzip the file and place the image ( the image is called image, not gen1 to gen2) on the root of your sd card (ideally it is best to do this on a pc)
Also download and place the Rom you wish to use on the root of your SD card (cyanogenMod 7.1.0 stable release works well) http://forum.xda-developers.com/showthread.php?t=1297776
DO NOT UNZIP THE ROM at this stage.
Put the SD card back into the phone.
Power off the phone, hold menu & vol + (up) & power at the same time, you should see some green writing, wait until it is finished (well done your phone is now gen2)
You should now arrive at the clockwork recovery screen, if not power off the phone, then hold vol - (down) and power (together), clockwork will boot.
Now using clockwork recovery, clear data/factory reset, then install your rom from the zip, that is all there is to it, obviously you'll have to enter your login details to use the market and sync your contacts etc, but your phone should now be working.
Don't forget to make a nandroid backup.
Goodluck
sent using tapatalk

THANK YOU VERY VERY VERY MUUCHH !!!!
it works perfect !!!!!!!
thanks ((((

You are very welcome
sent using tapatalk

[Q] Help going back to stock?

Hi, im in the process of selling my phone and am following the tutorial on here about turning the phone back onto stock. The flash with flashtool was successful but im forever stuck on the boot screen? with now no way to go into custom recovery? i installed the correct rom for the phone so why hasnt it worked? thanks in advance.

dav08094194 said:
Hi, im in the process of selling my phone and am following the tutorial on here about turning the phone back onto stock. The flash with flashtool was successful but im forever stuck on the boot screen? with now no way to go into custom recovery? i installed the correct rom for the phone so why hasnt it worked? thanks in advance.
Click to expand...
Click to collapse
The only way I could get it to work was the following; however there is one thing to try before you try my way because mine did this also - after the wipe and flash with flashtool etc. The only way I found to get out the bootloop was to do a factory restore after when its looping. So from the boot screen loop hold the power button until it goes off then on then off again.
Then do the process to get into the recovery so hold down and power then release power as soon as the lg logo appears (first one) then press it again immediately that SHOULD get ya to the grey factory reset screen. Press the power button 3 x and it should do a factory restore and boot up this time. First boot may take a minute it should eventually start up.
Failing that try this - Open the lg mobile support tool and connect the phone in download mode (volume up and power with plugged in usb on mine) then go to options and upgrade recovery. it will download a file usually about 2GB then install it, the phone will reboot at 100% on the phone and 80ish% on the lg tool it will then start into the setup feature,
DO NOT disconnect the phone until it gets to 100% and finishes. This way you shouldn't need to do an extra factory reset.
I understand for this the phone needs to be seen on com 4 (it shows on the phone screen) so if necessary go into device manager with the phone still plugged in in download mode and select com ports then select the phone com port then right click >properties> advanced and change the com port to 4. It may tell u its already being used but don't worry it is fine. Save and exit device manager.
please bare in mind these are just my experiences on MY LG D802 however its worked every single time for me without fail and ive done it a good few lol.
HTH:good:

[Q] My alcatel pop c3 was stuck in boot logo

I rooted my phone and it was successful then i used "eris market fix" then it says i need to restart and then my phone was stuck into boot logo sorry for bad english

iamjustincute said:
I rooted my phone and it was successful then i used "eris market fix" then it says i need to restart and then my phone was stuck into boot logo sorry for bad english
Click to expand...
Click to collapse
How can i make my phone work again need help pleeaaase ((((

U need to go into recovery mode by powering off your phone then keep your fingers on volume up and power. Power botton should be the last key. (Even when the phone turn on dont release the botton until u go into a black screen with som writing) when u are in recover mode use volume up snd down keys to navigate to factory reset then use power key to select it then scroll down to yes then use power to select it then wait until everything is over then reboot the phone.
Sent from my ONE TOUCH 4033A using XDA Free mobile app

Help! Formatted my bootloader
Please Help!... i have a Dl700, pop c3 4033A i'm in jamaica and i got it from digicel. i managed to root the phone but bricked it after. i found a stock rom ans tried to flash it with the flash tool and i keep getting BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail i found a forum that said i should format with the flash tool and try again but i did a whole flash and deleted my bootloader. now its just black screen and the computer only recognizes it without its batteries and as a mtk device which keeps disconnecting and reconnecting. plz help its the only phone i have i was just too curious i guess

same problem here