Hello all, I'm looking to find a way to force hands-off activation on a custom ROM.
So far I have tried most of the custom ROMs available for our device but because my carrier is Credo I still can't get 4G to work even if it's supported. I've tried changing APNs and copying the activation.apk from the stock ROM to system but I can't seem to get it working. Any ideas?
Normally on a sprint Roms its ##72786#
Sent from my SPH-L720 using Tapatalk 4
Tried it but I have only had it work on the stock sprint ROM. The code does nothing with aosp, cm, carbon, paranoid. Attempted to copy hidden.apk to system to add the feature but was only able to get basic functions and not hands-free activation.
luzfero said:
Tried it but I have only had it work on the stock sprint ROM. The code does nothing with aosp, cm, carbon, paranoid. Attempted to copy hidden.apk to system to add the feature but was only able to get basic functions and not hands-free activation.
Click to expand...
Click to collapse
Well of course since those are sprint codes they will only work on touchwiz. That's given.
Sent from my SPH-L720 using Tapatalk 4
daniel4653 said:
Well of course since those are sprint codes they will only work on touchwiz. That's given.
Sent from my SPH-L720 using Tapatalk 4
Click to expand...
Click to collapse
Well..yes. That was the point of this thread. To get it working on other ROMs.
I'm trying to force my phone to do the hands-free activation(what sprint/credo does) on a custom ROM so I can get 4G working. I have flashed various other ROMs and lost my 4G then subsequently got it back by doing the hands-free activation so I know that's what I need to do.There has to be a way to do it on non-tw,not all sprint/credo phones use touchwiz.
luzfero said:
Well..yes. That was the point of this thread. To get it working on other ROMs.
I'm trying to force my phone to do the hands-free activation(what sprint/credo does) on a custom ROM so I can get 4G working. I have flashed various other ROMs and lost my 4G then subsequently got it back by doing the hands-free activation so I know that's what I need to do.There has to be a way to do it on non-tw,not all sprint/credo phones use touchwiz.
Click to expand...
Click to collapse
You didn't specify "other Roms" as purely AOSP/CM based. I was under the impression that you meant Roms like Sacs, Triforce, Etc.
Sent from my SPH-L720 using Tapatalk 4
daniel4653 said:
You didn't specify "other Roms" as purely AOSP/CM based. I was under the impression that you meant Roms like Sacs, Triforce, Etc.
Sent from my SPH-L720 using Tapatalk 4
Click to expand...
Click to collapse
My apologies, I wasn`t clear enough.
The ROMs I have used are: triforce, paranoid, google edition, xtremperia, aosp(3 different ROMs) carbon, slim-bean and nowiz.
luzfero said:
My apologies, I wasn`t clear enough.
The ROMs I have used are: triforce, paranoid, google edition, xtremperia, aosp(3 different ROMs) carbon, slim-bean and nowiz.
Click to expand...
Click to collapse
Why don't you so a backup and just install a tw ROM then do the code later just restore to your original ROM?
ROMANTiC KiD said:
Why don't you so a backup and just install a tw ROM then do the code later just restore to your original ROM?
Click to expand...
Click to collapse
Tried that as well but the activation doesn't stick after a flash. I'll get 3G but not 4G. Also tried backing up APNs and doing a restore but no dice.
Forgive me for adding the obvious, but have you tried to update profile and prl via the settings menu? All I have ever done in the past.
C41n
Sent from my Rooted Sprint Galaxy S4, via tapatalk 4.
Yeah tried that for the TW ROMs but theres's no option on AOSP or CM based ROMs
Did you ever figure this out?
luzfero said:
Yeah tried that for the TW ROMs but theres's no option on AOSP or CM based ROMs
Click to expand...
Click to collapse
I'm currently trying to activate my sprint htc one m8 that has the Google Play Edition ROM. Currently I cannot make calls or send/receive text messages. I know it's a different phone, but if you found a solution, then that might give me a good idea of what I should try.
pancho2009 said:
I'm currently trying to activate my sprint htc one m8 that has the Google Play Edition ROM. Currently I cannot make calls or send/receive text messages. I know it's a different phone, but if you found a solution, then that might give me a good idea of what I should try.
Click to expand...
Click to collapse
Make a nandroid backup, flash stock ROM, activate, restore backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
Make a nandroid backup, flash stock ROM, activate, restore backup.
Click to expand...
Click to collapse
Is the nandroid back up the same thing as making a backup in TWRP recovery? If so, I did that. I also flashed the rooted stock rom and activated my phone. I then restored from the backup I made. Now, I'm back on Google Play Edition ROM and I can now make/receive call/messages, but I cannot get any cellular data! Any ideas on that?
pancho2009 said:
Is the nandroid back up the same thing as making a backup in TWRP recovery? If so, I did that. I also flashed the rooted stock rom and activated my phone. I then restored from the backup I made. Now, I'm back on Google Play Edition ROM and I can now make/receive call/messages, but I cannot get any cellular data! Any ideas on that?
Click to expand...
Click to collapse
You have to have your APN set to that of your carrier.
bilgerryan said:
Make a nandroid backup, flash stock ROM, activate, restore backup.
Click to expand...
Click to collapse
flash as in dirty flash?
qazqwertyuiop6950 said:
flash as in dirty flash?
Click to expand...
Click to collapse
No. Clean flash. Activation is done at Setup. That's why you make the backup, then you can just restore after you activate it.
Related
Oh so what exactly is a Kernal and Over clocking?
moonmanxo said:
Oh so what exactly is a Kernal and Over clocking?
Click to expand...
Click to collapse
The Kernal is the VERY core of the Luiux system. It's the heart if you will. It is boss, what you tell it to do, it does. for the good and for the bad. Rooting gives you direct access to the Kernal, called "SU" Super User Access, or in temp. access "sudo" but that's a different story.
This comic explains it a little.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Over-clocking is making the processor work faster than it was designed to work. so our baseline is 1.0Ghrz. With a Kernal that allows for overclocking we can get to speeds like 1.5Ghrz or anywhere in between. gives a smoother, faster overall experience.
OK , so is it worth putting on the phone? Im using stock sense for now then Im going to switch to iced. I jusst cant seem to stick to the other roms. So how would I put a different kerna; and o/c.
moonmanxo said:
OK , so is it worth putting on the phone? Im using stock sense for now then Im going to switch to iced. I jusst cant seem to stick to the other roms. So how would I put a different kerna; and o/c.
Click to expand...
Click to collapse
Iced Glacier may have an overclocked Kernal already installed into the ROM. I do not know much about Iced Glacier. You'd have to check out that thread.
neidlinger said:
Iced Glacier may have an overclocked Kernal already installed into the ROM. I do not know much about Iced Glacier. You'd have to check out that thread.
Click to expand...
Click to collapse
What does cyanogen have to offer, I see thats what you're using.
moonmanxo said:
What does cyanogen have to offer, I see thats what you're using.
Click to expand...
Click to collapse
Cyanogen is a pure AOSP ROM, it doesn't have many bells and whistles and it's not "prettied up" to make it appealing. It's bare bones vanilla android. Like what the Nexus Line and the G2 use.
I have nothing against Iced Glacier, It's a good ROM that is turning some impressive numbers. However i personally prefer the sock look and feel of android.
im thinking of trying it out, anything special I need to know or add?
moonmanxo said:
im thinking of trying it out, anything special I need to know or add?
Click to expand...
Click to collapse
Not Really. Zinx has done an AMAZING job with this ROM. Just follow their wiki-page and you'll be good to go. It's easy to understand and very straight forward.
just make sure to do a nandroid backup of your current ROM. And save it on the SDcard and on another means of media. You don't want something to go south and not be able to get your phone back to a "stock look".
yeah I know, ive tried eVil HD and Z and its juss not my taste.
Few more questions,. How do I carry my apps over? and whats this Google Addon?
moonmanxo said:
Few more questions,. How do I carry my apps over? and whats this Google Addon?
Click to expand...
Click to collapse
To carry applications and data over use Titanium Backup, you can get by with the free one, but i highly suggest the paid version.
the "google addon" or "GAPPS" is the Google Talk/GMail/Google Maps/Market applications. Those are not "open source" like the ROM is so you have to add those on to the end of flashing a ROM.
neidlinger said:
To carry applications and data over use Titanium Backup, you can get by with the free one, but i highly suggest the paid version.
the "google addon" or "GAPPS" is the Google Talk/GMail/Google Maps/Market applications. Those are not "open source" like the ROM is so you have to add those on to the end of flashing a ROM.
Click to expand...
Click to collapse
OK and how would I do that?. and you mind explaining the titan backup to me please. Im really new to android lol only been 1 week.
moonmanxo said:
OK and how would I do that?. and you mind explaining the titan backup to me please. Im really new to android lol only been 1 week.
Click to expand...
Click to collapse
No problem...
Couple of questions
Are you perma-rooted?
do you know if s=on or s=off
have you flashed a custom recovery image?
Android Zoom : Titanium Backup can be found here
Make sure you have a barcode scanner for "androidzoom"
Im perma-rooted, Im s=off
what you mean by flashed a custom recovery image? all I've done is ROMS, mods and font.
moonmanxo said:
Im perma-rooted, Im s=off
what you mean by flashed a custom recovery image? all I've done is ROMS, mods and font.
Click to expand...
Click to collapse
Do you have Clockwork ROM Manager? And at the top it says "flash custom recovery image". did you do that?
Sounds like you have if you've done those listed above.
Oh yeah, I did the flash clockwork recovery n bla bla
moonmanxo said:
Oh yeah, I did the flash clockwork recovery n bla bla
Click to expand...
Click to collapse
After you wipe and flash cyanogen, flash the GAPPS. That simple .
Sorry for all the question but i don't want to tell you to process "d" and we've skipped a, b, or c.
No problem I understand . So you mind explaining titan better to me, i have it installed.
EDIT: Another question a little off topic.. Can i use any font I want or only those here on the forum?
moonmanxo said:
No problem I understand . So you mind explaining titan better to me, i have it installed.
EDIT: Another question a little off topic.. Can i use any font I want or only those here on the forum?
Click to expand...
Click to collapse
What you will want to to is at the bottom of Titanium you will see a "got problems". click on it and down load busybox. fairly quick and small footprint protocol deal. What it does is will back up all of your applications to your SD card. So when you wipe > flash ROM > reboot you can use titanium back up to restore everything.
Click on schedules > edit > and make it "back up applications and user data" then click run.
That will back every thing up
Then when you reboot you can : Got problems > download busy box > applications and restore the ones that have a greenish color "M" next to them.
And it's like you never left.
as far as fonts go i recommend using the ones found Here. Or downloading and using the ones in an applications called "root tools".
Thanks, going to give this a shot now
Verizon Xperia Z2 Tablet 17.1.D.0.437 firmware update rolling now.
Android 4.4.2
Changelog : • improved application accessibility from Google Play and “Close Door” pop-up messages bug has been corrected.
Source - http://www.gizmobolt.com/2014/08/01/verizon-xperia-z2-tablet-17-1-d-0-437-firmware-update-rolling/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Got the update ?
Did u have root before doing the update? Or the custom recovery installed?
Sent from my HTC6525LVW using Tapatalk
csstamatin said:
Did u have root before doing the update? Or the custom recovery installed?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Before I did the update I had the phone rooted. I didnt loose root. now I have a question that if anyone can help please. Is the verizon xperia Z2 tablet unable to have custom roms and flashed? I followed the link to unlock the bootloader and it says its not available. Is there a method to unlock without the option for Sony website?
As far as I know, no bootloader unlock. Also don't think anyone is working on it. Not sure though.
Sent from my HTC6525LVW using Tapatalk
csstamatin said:
As far as I know, no bootloader unlock. Also don't think anyone is working on it. Not sure though.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Ok thanks sir. I have it rooted and works great. I used kingo and works awesome.
the_rooter said:
Before I did the update I had the phone rooted. I didnt loose root. now I have a question that if anyone can help please. Is the verizon xperia Z2 tablet unable to have custom roms and flashed? I followed the link to unlock the bootloader and it says its not available. Is there a method to unlock without the option for Sony website?
Click to expand...
Click to collapse
You don't need to have unlocked bootloader to install custom rom. Only when installing custom kernel.
kulvertti said:
You don't need to have unlocked bootloader to install custom rom. Only when installing custom kernel.
Click to expand...
Click to collapse
can someone direct me where to look because everything i find shows that your need an unlocked bootloader to use custom roms, and custom recovery. Also doesnt that void the use of custom roms? you would use a custom kernel on that.
the_rooter said:
can someone direct me where to look because everything i find shows that your need an unlocked bootloader to use custom roms, and custom recovery. Also doesnt that void the use of custom roms? you would use a custom kernel on that.
Click to expand...
Click to collapse
You can find custom recovery here:
http://forum.xda-developers.com/showthread.php?t=2794175
I'm afraid that so far no luck with custom roms because only ones for this device are cm or aspects based wich include custom kernel. We need developers for custom roms with stock kernel.
kulvertti said:
You can find custom recovery here:
http://forum.xda-developers.com/showthread.php?t=2794175
I'm afraid that so far no luck with custom roms because only ones for this device are cm or aspects based wich include custom kernel. We need developers for custom roms with stock kernel.
Click to expand...
Click to collapse
I tried this method and didnt work to no avail. I tried it a few times. So i decided to stop where it was at.
the_rooter said:
I tried this method and didnt work to no avail. I tried it a few times. So i decided to stop where it was at.
Click to expand...
Click to collapse
Okay, however it works fine here and developer give great support with problems one might have.
kulvertti said:
Okay, however it works fine here and developer give great support with problems one might have.
Click to expand...
Click to collapse
ok
That close latch message was a pita. Glad they fixed it.
failed OTA update on my Z2
My OTA update had failed on the Verizon Sony Z2 tablet, now the tablet shows "software update failed" at boot up can anyone help?
I have installed almost all available CM7 variants for our phone. But one thing is annoying me. I can't connect to mobile data. I used all available kernels for CM7 and also stock. I also followed the installation procedure step by step.But still no luck. Mobile network says, "connecting" then goes disconnected after a few seconds and it happens all the time. Can someone give answers to me?
This is my very first post. So please forgive me if anything is wrong.
Try flashing back to stock rom.....is network data working on stock????
I am also using cm7 based rom havn't faced anything yet!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
adriansticoid said:
I have installed almost all available CM7 variants for our phone. But one thing is annoying me. I can't connect to mobile data. I used all available kernels for CM7 and also stock. I also followed the installation procedure step by step.But still no luck. Mobile network says, "connecting" then goes disconnected after a few seconds and it happens all the time. Can someone give answers to me?
This is my very first post. So please forgive me if anything is wrong.
Click to expand...
Click to collapse
CyanogenMod 7 for Galaxy Y is in RC release however there is still bugs like that which is only encountered on your device. You should flash to Stock ROM using Odin since Data connection using CM7 is causing problems on you.
And welcome to XDA! .
jpdesuasido said:
CyanogenMod 7 for Galaxy Y is in RC release however there is still bugs like that which is only encountered on your device. You should flash to Stock ROM using Odin since Data connection using CM7 is causing problems on you.
And welcome to XDA! .
Click to expand...
Click to collapse
That's sad. Device specific problem eh. I'll try flashing back to stock when I have the chance. I don't have a PC.
Trupal Patel said:
Try flashing back to stock rom.....is network data working on stock????
I am also using cm7 based rom havn't faced anything yet!
Click to expand...
Click to collapse
Yes. Data is working on both stock and miniROM for me. The only thing I can do now is to restore a CWM backup of stock because I don't have PC.
Ok get a chance n Try falshing back to stock rom via odin and then try again to flsah CM7....
It may work...
adriansticoid said:
Yes. Data is working on both stock and miniROM for me. The only thing I can do now is to restore a CWM backup of stock because I don't have PC.
Click to expand...
Click to collapse
You can use the tool made by @.rio of xda developers! A Odin for Galaxy Y that doesn't need to use PC. You can find it in the Android Development forum in Galaxy Y.
1209
jpdesuasido said:
You can use the tool made by @.rio of xda developers! A Odin for Galaxy Y that doesn't need to use PC. You can find it in the Android Development forum in Galaxy Y.
Click to expand...
Click to collapse
Yes I know that. But he says, param.lfs is not working. What does that mean? I have already modified the param.lfs in my phone because I installed a custom boot logo.
Trupal Patel said:
Ok get a chance n Try falshing back to stock rom via odin and then try again to flsah CM7....
It may work...
Click to expand...
Click to collapse
Hey man. I flashed back to stock using rio's tool. Still no luck. I installed CM7 Reincarnation S5 edition. But my problem still persists. Mobile network state says, connecting. Then says disconnected afterwards. I don't know what to do anymore.
adriansticoid said:
Hey man. I flashed back to stock using rio's tool. Still no luck. I installed CM7 Reincarnation S5 edition. But my problem still persists. Mobile network state says, connecting. Then says disconnected afterwards. I don't know what to do anymore.
Click to expand...
Click to collapse
Go to a computer shop and Odin it. Or go back to stock ROM again using rio's tool. I think it's a problem of CM7. :highfive:
jpdesuasido said:
Go to a computer shop and Odin it. Or go back to stock ROM again using rio's tool. I think it's a problem of CM7. :highfive:
Click to expand...
Click to collapse
I just reverted back to stock now using Odin. Guess what? Mobile data still not working.
hello
First off, I have modded with cyanogenmod quite some time ago.
I have kept that up date (cause of their nice update program), but I have never updated the carrier roaming lists (PRL?). My coverage seems to be crappy and I think it just may have to do with my newbishness.
I am running Cyanogenmod 11-20141112-SNAPSHOT-M12-jflte
Sprint PRL = 55018
is there a retard guide for me to easily update.... any suggestions or links would be great. I have spent over an hour searching google, but I am obviously using the wrong keywords and I am getting frustrated. I keep stumbling across other models / mods and I am fearful of breaking something....
Thanks for your time
qu1nn
You'll need to flash a touchwiz based ROM to do a PRL update.
qu1nn said:
hello
First off, I have modded with cyanogenmod quite some time ago.
I have kept that up date (cause of their nice update program), but I have never updated the carrier roaming lists (PRL?). My coverage seems to be crappy and I think it just may have to do with my newbishness.
I am running Cyanogenmod 11-20141112-SNAPSHOT-M12-jflte
Sprint PRL = 55018
is there a retard guide for me to easily update.... any suggestions or links would be great. I have spent over an hour searching google, but I am obviously using the wrong keywords and I am getting frustrated. I keep stumbling across other models / mods and I am fearful of breaking something....
Thanks for your time
qu1nn
Click to expand...
Click to collapse
Make a nandroid backup.
Wipe everything.
Flash TouchWiz ROM.
Go to Settings/System Updates.
Update PRL and Profile.
Restore nandroid.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
Make a nandroid backup.
Wipe everything.
Flash TouchWiz ROM.
Go to Settings/System Updates.
Update PRL and Profile.
Restore nandroid.
Click to expand...
Click to collapse
thanks for the detail.
I dont mean to be a turd, but there seems to be a whole lot of TouchWiz variants. Is there a specific one to use?
thanks, and best regards
qu1nn said:
thanks for the detail.
I dont mean to be a turd, but there seems to be a whole lot of TouchWiz variants. Is there a specific one to use?
thanks, and best regards
Click to expand...
Click to collapse
Any TouchWiz should be fine, but go with stock if you want to make sure
mattzeller said:
Any TouchWiz should be fine, but go with stock if you want to make sure
Click to expand...
Click to collapse
another dumb question, will I loose root if I flashTouchWiz (which is the original S4 Rom)..?
qu1nn said:
another dumb question, will I loose root if I flashTouchWiz (which is the original S4 Rom)..?
Click to expand...
Click to collapse
Yes, unless you use stock rooted. But that doesn't matter since all you are doing is flashing stock ROM, updating PRL and then restoring cyanogenmod
mattzeller said:
Yes, unless you use stock rooted. But that doesn't matter since all you are doing is flashing stock ROM, updating PRL and then restoring cyanogenmod
Click to expand...
Click to collapse
sorry for being a pain, but as I dont do this often...
if I flash the zip here http://forum.xda-developers.com/showthread.php?t=2257503
this will put me back to TouchWIz original (plus root)
then I will follow the rest of the steps
(sorry for being dense, I was incorrectly thinking that I would loose the ability to use clockworkmod recovery / restore functions once I flashed the touchwiz rom and I would have to root before I could restore cyanogen, but that is firmware not ROM..... )
Its late and I have been up forever...
Thanks
I need some help.
Using Clockworkmod recovery V 6.0.4.7.
Tried using http://galaxys4root.com/galaxy-s4-rooted-stock-roms/ >>>> "Download Galaxy S4 rooted Stock ROM Sprint SPH-L720 Latest MF9 "
checked the filesize and the md5 sum, all good.
WHen I tried to use CWM to install zip from SDcard1 it gave me an error (missing 4 of 5) and aborted the installation.
I tried to search somewhere else to find a .zip that would bring the Sprint SPH-L720 back to stock, however they all seem to not have .zip for CWM recovery however make use of ODIN (which i cannot use as I dont have a windows computer, I use linux)
I want to go back to stock to update the prl before going to cyanogenmod 12.1
any suggestions ?
thanks
qu1nn
Rough night here.
somehow I lost clockworkmod recovery and ended up being still rooted with stock mf9 recovery, but I still had cyanogenmod 11 working; I recovered by installing clockworkmod application; > model > flash clockworkmod recovery > shutdown.
In the midst of that fiasco I say this page http://forum.xda-developers.com/showthread.php?t=2296167
which implies that keeping the PRL as up to date is not so required.....
so I bailed after several different attempts to install a ROM that would allow me to do a prl update.
I flashed the latest cyanogenmod nightly 12.1 and I am off and running.
qu1nn
Is there anything out there that will work flashed with a real recovery rather then just SafeStrap?
With the recent bootloader unlock, I'm curious whats currently available? and what might actually work, will anything we currently have work?
Or does everything have to be customized to work now that we have a true bootloader unlock?
I would like to toast this thread, I should have responded to the post under me, but forgot to check for one.
Jasmine rom 6.1 works perfectly just download and flash the zip in twrp. Don't forget to do a full wipe like in the picture below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N900V using Tapatalk
alexp1289 said:
Jasmine rom 6.1 works perfectly just download and flash the zip in twrp. Don't forget to do a full wipe like in the picture below.
View attachment 3722566
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
I'm just got around to trying Jasmine I've been flashing everything under the sun all night, CM13, Dirty Unicorns, and now Jasmine but
a bunch of other stuff also.
I'm having trouble connecting to my 4G LTE data on all of them including Jasmine,
is there some modem firmware I should be flashing over these ROMs after installation?
A couple ROMs did include firmware flashing instructions but I wasn't sure if that was relevant
if coming from OF1 to a unlocked bootloader and then flashing a custom ROM.
Too be fair though its hard to pick out which instructions are relevant when the bootloader
is unlocked and you have a real recovery, and which doesn't apply to us, since the instructions
usually aren't written with that in mind. =/
I've never seen this before with ROMs on other phones.
Anyone having issues with non-Verizon server providers especially MVNO's like Straight Talk (Verizon)?
Thanks for the info that its working for most people and should be working, I wonder
what my issue with it is then.
I've been trying to enter in a custom Access Point Name on a bunch of the ROMs, unfortunately Jasmine's seems to be greyed
out and I can't add a custom one.
Cellular phone calls are working, but data is not though Dirty Unicorns did have 1X data working but that is the best
I've come up with so far.
I just need to deliver something usable on this phone so my uncle can wait for a CM release that mostly works.
We were worried about a update being shipped out on the stock ROM updating over the bootloader unlock,
so we went ahead and tried some of the custom ROMs everyone has have generally positive results with.
After a long time playing around with it I accidentally formatted my TWRP backup of the stock ROM not paying
enough attention, which I should have backed up to a real hard drive.
I originally came to this trying to get hotspot working since he's on a MVNO the stock Verizon Note 3 ROM
won't hotspot or tether, and he has no other options for a little internet access out in the boonies.
Now I'm in a odd situation having to deliver something that works well enough for him to wait it out for a
CM release.
And don't know if flashing stock will lock the bootloader again or if I should flash it with Odin or if I can flash a stock
image with TWRP and where to get one for that.
I would prefer not to have to do that though.
alexp1289 said:
Jasmine rom 6.1 works perfectly just download and flash the zip in twrp. Don't forget to do a full wipe like in the picture below.
View attachment 3722566
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
In the Jasmine installation instructions should I be following anything related to the developer edition?
FLASH lk_hltevzw-v6.4.zip in recovery after flashing the Jasmine ROM image?
And in our situation should I be flashing the firmware with Odin after the install as per the Developer Edition instructions?
Or just flashing Jasmine and rebooting?
dreyeth said:
In the Jasmine installation instructions should I be following anything related to the developer edition?
FLASH lk_hltevzw-v6.4.zip in recovery after flashing the Jasmine ROM image?
And in our situation should I be flashing the firmware with Odin after the install as per the Developer Edition instructions?
Or just flashing Jasmine and rebooting?
Click to expand...
Click to collapse
No disregard the instructions about the kernel if your bootloader is from the 0F1 firmware update. A custom kernel needing to be flashed was only for developer editions because the bootloader was unable to be upgraded without locking the device. Hence tweaks to the kernel were needed to run the rom with no issues. It doesn't apply to you if you unlocked your 0F1 bootloader.
Sent from my SM-N900V using Tapatalk
alexp1289 said:
Jasmine rom 6.1 works perfectly just download and flash the zip in twrp. Don't forget to do a full wipe like in the picture below.
View attachment 3722566
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Got any ideas for someone who has successfully flashed Jasmine before but then went
and tried a bunch of ROMs to see if they would work but then when I was done
went back to flash Jasmine and now it infinitely boots never stops after flash?
[Solved]
Weird I cannot get Jasmine to boot without flashing the kernel, but I can get her
to boot with it.
I'm really thinking I need a clean slate on this.
dreyeth said:
Got any ideas for someone who has successfully flashed Jasmine before but then went
and tried a bunch of ROMs to see if they would work but then when I was done
went back to flash Jasmine and now it infinitely boots never stops after flash?
[Solved]
Weird I cannot get Jasmine to boot without flashing the kernel, but I can get her
to boot with it.
I'm really thinking I need a clean slate on this.
Click to expand...
Click to collapse
Do a twrp wipe just like in the picture and you should be good to go.
Sent from my SM-N900V using Tapatalk
alexp1289 said:
View attachment 3723572
Do a twrp wipe just like in the picture and you should be good to go.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yeah after you're previous post I started doing that, weird thing is I had trouble with it even
doing that, but then I got it resolved.
dreyeth said:
Yeah after you're previous post I started doing that, weird thing is I had trouble with it even
doing that, but then I got it resolved.
Click to expand...
Click to collapse
have u encrypted ur phone ?
yenkoPR said:
have u encrypted ur phone ?
Click to expand...
Click to collapse
Nah the phone wasn't encrypted.