Canadian Note 3 Exposed Installer - AT&T Galaxy Note 3 General

Just a quick heads up for some of you who haven't tried. Im on Rogers note 3 and am rooted, I just tried installing Exposed installer and Wanam from the app store and almost everything is working perfectly as well as a few other modules. This is amazing...here is the link
http://forum.xda-developers.com/showthread.php?t=2467958

cottageboy said:
Just a quick heads up for some of you who haven't tried. Im on Rogers note 3 and am rooted, I just tried installing Exposed installer and Wanam from the app store and almost everything is working perfectly as well as a few other modules. This is amazing...here is the link
http://forum.xda-developers.com/showthread.php?t=2467958
Click to expand...
Click to collapse
Nice, making me wish I got a T-Mobile Note 3 instead of my AT&T one.

This should now work right since we have root?

Related

[Q] Note 4 SM-N910F - Freezing/Lag -Rooted

I have a rooted Samsung Galaxy Note 4 (SM-N910F). I often clear running apps to clear RAM, I don't have an SD card installed currently (thought it doesn't seem to make any difference either way) my phone will have a short second or so delay regularly. It happens in all apps I use so I can't narrow it down to one app. This is my first Android device so I'd appreciate any help. Thanks
I had that till I upgraded to the latest supersu
Sent from my SM-N910W8 using XDA Free mobile app
tommassey said:
I have a rooted Samsung Galaxy Note 4 (SM-N910F). I often clear running apps to clear RAM, I don't have an SD card installed currently (thought it doesn't seem to make any difference either way) my phone will have a short second or so delay regularly. It happens in all apps I use so I can't narrow it down to one app. This is my first Android device so I'd appreciate any help. Thanks
Click to expand...
Click to collapse
hi,
If you are rooted, have you installed Xposed Framework, and other modules, perhaps?
It is known that Xposed, when installed, it could cause, quite a bit of lag at times, (until you apply relevant fix?) Good luck
Hello, I do have Xposed framework installed. With three modules (see screenshot). I don't Adfree is the only app I have downloaded outside of Google play. I'll perhaps try removing each module to see if that helps.
tommassey said:
Hello, I do have Xposed framework installed. With three modules (see screenshot). I don't Adfree is the only app I have downloaded outside of Google play. I'll perhaps try removing each module to see if that helps.
Click to expand...
Click to collapse
It's the Xposed framework itself that's causing lag. You need to download a module called XSecureStorage, enable it, clear data for S Health (even if you're not using it) and reboot.
iR¡[email protected]!* from Galaxy Note 4 via Tapatalk
i have note 4 the international variant 910F , after a 30 minutes of playing Heroes Charge , or clash of clans , my phone´s go crazy , moving in lag , camera opened after 12 seconds ( cant see the image of camere only in slow motion ) , but after i lock screen and wait 10 second , the phones back to normaly ... i dont know why ...
is no rooted , no cwm ...
iridaki said:
It's the Xposed framework itself that's causing lag. You need to download a module called XSecureStorage, enable it, clear data for S Health (even if you're not using it) and reboot.
iR¡[email protected]!* from Galaxy Note 4 via Tapatalk
Click to expand...
Click to collapse
I have followed these steps and it appears to have done the trick! Thank you mucky

[How To] Enable WiFi Hotspot on Rooted Lollipop OC1 ROM's

Enable native tethering on Galaxy Note 3 AT&T (SM-N900A) running Android 5.0
This is personally Tested on my Galaxy Note 3 running rooted OC1 5.0 Rom
and Galaxy S4 AT&T SGH-I337 running rooted 5.0 rom
Backup your existing TetheringProvision.apk (I just renamed my old one TetheringProvision.apk1)
place modded apk in system/app/TetheringProvision/
Make sure permissions are set as seen in screenshot
delete TetheringProvision/ARM folder before rebooting
Reboot device
????????????
Profit!
As always this is at your own risk
It works!! I have to delete TetheringProvision/arm and reboot. Thanks a bunch, have been looking for this for a while.
cgm8 said:
It works!! I have to delete TetheringProvision/arm and reboot. Thanks a bunch, have been looking for this for a while.
Click to expand...
Click to collapse
Awesome! Glad to hear that it worked for you.
Sofar I've far I have tested the modded APK on ;
AT&T Galaxy S4 on both Android 4.4.4 and 5.0
AT&T Samsung Galaxy Note 3 on Android 5.0
At&T Samsung Galaxy S5 on 4.4.2
AT&T Note 3 here and i can say it works and is much better than the last workaround i tried. Basically after using the tether I had to restart the phone to reenable wifi. :laugh:
Edit: Spoke too soon. When I turn off the hotspot wifi comes back on and connects. However, the occasional web page will refuse to load. Will only load 3/4 of the way unless I leave it for like 2 minutes. Pages with embedded video don't load within that time period at all. But youtube embeds work as does the app. Restarting the phone fixes everything.
At least it is progress in my case! Using an app before would cause wifi to show as toggeled on, but refused to connect or turn off.
Hello guys I'm new to the android devices I tried to install this apk file but it just tells me that it is not installed is their another app that I need to get this to work I just rooted my note 3 yesterday and upgraded to the lollipop thanks in advance
WaNam xposed for lollipop that's how.
Thanks for this
Galaxy Note 3 (9000A) on CricKet network running 4.4.2. Towelrooted months ago and TouchWiz recently began crashing, so I finally did a factory reset. Lost ability to hotspot tether using FoxFi/PdaNet. Did the reset change some settings? If so, how do I change them back? Perhaps someone more experienced could walk me through the apk change or point me to a "____ for Idiots" type tutorial.
Anyone try this on OC2?
kdubya said:
Galaxy Note 3 (9000A) on CricKet network running 4.4.2. Towelrooted months ago and TouchWiz recently began crashing, so I finally did a factory reset. Lost ability to hotspot tether using FoxFi/PdaNet. Did the reset change some settings? If so, how do I change them back? Perhaps someone more experienced could walk me through the apk change or point me to a "____ for Idiots" type tutorial.
Click to expand...
Click to collapse
If you are rooted, use Wanam Xposed & MotoTether. I use this method on Cricket. Then just use the native tether on phone.
forrest89sei said:
Enable native tethering on Galaxy Note 3 AT&T (SM-N900A) running Android 5.0
This is personally Tested on my Galaxy Note 3 running rooted OC1 5.0 Rom
and Galaxy S4 AT&T SGH-I337 running rooted 5.0 rom
Backup your existing TetheringProvision.apk (I just renamed my old one TetheringProvision.apk1)
place modded apk in system/app/TetheringProvision/
Make sure permissions are set as seen in screenshot
Reboot device
????????????
Profit!
As always this is at your own risk
Click to expand...
Click to collapse
cgm8 said:
It works!! I have to delete TetheringProvision/arm and reboot. Thanks a bunch, have been looking for this for a while.
Click to expand...
Click to collapse
Great thanks cgm8.
I spent almost 2 hrs based on OPs steps but it kept saying "TetheringProvision.apk failed" or something after each reboot and then I almost gave up.
Luckily I saw your post that we should delete the ARM folder so I thought of giving it a last try...just in case you know.
And BOOM... after deleting the ARM folder and rebooting again, no error and then when I went to settings to enable HotSpot, it enabled flawless...lol
OP, can you pls add this simple step i.e. delete TetheringProvision/ARM folder before rebooting so everyone gets 100% success in this...???
Anyway, thanks a lot OP for this or else nothing else matters...
Will Att still see you tethering without the correct plan?
aranurea said:
Anyone try this on OC2?
Click to expand...
Click to collapse
It should, I'm using it on OC2
ajfathers said:
Great thanks cgm8.
I spent almost 2 hrs based on OPs steps but it kept saying "TetheringProvision.apk failed" or something after each reboot and then I almost gave up.
Luckily I saw your post that we should delete the ARM folder so I thought of giving it a last try...just in case you know.
And BOOM... after deleting the ARM folder and rebooting again, no error and then when I went to settings to enable HotSpot, it enabled flawless...lol
OP, can you pls add this simple step i.e. delete TetheringProvision/ARM folder before rebooting so everyone gets 100% success in this...???
Anyway, thanks a lot OP for this or else nothing else matters...
Click to expand...
Click to collapse
Thanks for the updated specs, I'll update my post
cmatthewb101 said:
Will Att still see you tethering without the correct plan?
Click to expand...
Click to collapse
They may, But I've been lucky doing this with both Straight Talk (AT&T MVNO) and Cricket (AT&T MVNO)
forrest89sei said:
Awesome! Glad to hear that it worked for you.
Sofar I've far I have tested the modded APK on ;
AT&T Galaxy S4 on both Android 4.4.4 and 5.0
AT&T Samsung Galaxy Note 3 on Android 5.0
At&T Samsung Galaxy S5 on 4.4.2
Click to expand...
Click to collapse
hi where did you get a working rooted N900A OC1 i cant find any good one
Cricket (AT&T MVNO)
----------------------------------
Not to be picky but Cricket is not a reseller, but 100% AT&T with no middleman.
forrest89sei said:
Enable native tethering on Galaxy Note 3 AT&T (SM-N900A) running Android 5.0
This is personally Tested on my Galaxy Note 3 running rooted OC1 5.0 Rom
and Galaxy S4 AT&T SGH-I337 running rooted 5.0 rom
Backup your existing TetheringProvision.apk (I just renamed my old one TetheringProvision.apk1)
place modded apk in system/app/TetheringProvision/
Make sure permissions are set as seen in screenshot
delete TetheringProvision/ARM folder before rebooting
Reboot device
????????????
Profit!
As always this is at your own risk
Click to expand...
Click to collapse
tried this on my s4 i337 att running 5.0.1 and kingroot, seemed to work and could see the access point but then it kept resetting and saying access point active over and over. had to reboot to stop it. could it be kingroot, if so, will remove with supersume pro.
---------- Post added at 10:23 PM ---------- Previous post was at 09:41 PM ----------
vince954 said:
tried this on my s4 i337 att running 5.0.1 and kingroot, seemed to work and could see the access point but then it kept resetting and saying access point active over and over. had to reboot to stop it. could it be kingroot, if so, will remove with supersume pro.
Click to expand...
Click to collapse
an update. I used supersume pro, gave me trouble doing it so I had to remove some of the kingroot files manually. seems to be working, super su working. as for the apk provision files, no joy, seems something is different in 5.0.1 so i went with wifi tether router and that works just fine. finally, its been a long road to get here...
forrest89sei said:
Enable native tethering on Galaxy Note 3 AT&T (SM-N900A) running Android 5.0
This is personally Tested on my Galaxy Note 3 running rooted OC1 5.0 Rom
and Galaxy S4 AT&T SGH-I337 running rooted 5.0 rom
Backup your existing TetheringProvision.apk (I just renamed my old one TetheringProvision.apk1)
place modded apk in system/app/TetheringProvision/
Make sure permissions are set as seen in screenshot
delete TetheringProvision/ARM folder before rebooting
Reboot device
????????????
Profit!
As always this is at your own risk
Click to expand...
Click to collapse
I can confirm this working on my samsung galaxy go prime SM-G530A from at&t running on straight talk and lollipop 5.1.1. Much thanks to OP for this modded tetheringprovision.apk. follow instructions exactly as written and everything is smooth. Anyone else needing to root this phone first here is a link to working root
Samsung Galaxy Go Prime SM-G530A root
http://forum.xda-developers.com/showthread.php?t=3283066
Sent from my SAMSUNG-SM-G530A using XDA-Developers mobile app
I have Rooted NC1 lollipop flashed via SS recovery.
Followed all steps but hotspot not working.
Also there is no ARM folder inside TetheringProvision...
--------------------------------------------------------------------------------------
UPDATE , New Method to Enable Tethering Hotspot :
--------------------------------------------------------------------------------------
1. installed "XposedInstaller_3.0_alpha4.apk" (for lollipop)
2. Flashed "xposed-sdk21-arm-20150430-arter97-V3.zip" via softstrap recovery (Note 3 at&t only)
3. Rebooted and Installed "com.dym.motoxtether_v5_aa815c.apk".
4. Open Xposed Installer -> Modules -> Check X Tether Module and Reboot Phone.
5. Done !! Tethering is Working Now.
This Process has been tested on Note 3 AT&T Running on Lollipop 5.0 Stock.
All files attached here and taken from xda.
Thank you. The tether apk worked fine from the first post. And the xposed worked from the post above. I now believe my phone is as good as it can get while locked.
Sent from my DROID Turbo using XDA-Developers mobile app
Works like a charm - S5 Active G870A
I did the steps and its working, for now an hour with no issues. Even ran a few matches of Fortnite on the Xbox! There were some slightly different folders/names. But, I figured which ones to delete.
Thanks!

Is xposed working on 6.0.1?

Hi, so I recently tried to install xposed on my note 4 (smn910w8) however my phone just got stuck on the Samsung screen. I know this version (6.0.1) is pretty new so I was just wondering if anyone has gotten it to work, if so what did you do.
Edit: this is the tutorial I used which did not work for some reason https://devs-lab.com/download-install-xposed-for-samsung-devices.html
Of course Xposed is working on Marshmallow. Its been weeks actually, since Wanam came up with the ALT version. And for some phones the standard version works too, but for Snapdragon ones its the ALT version which works. I don't have any idea about that model no. though!
ithehappy said:
Of course Xposed is working on Marshmallow. Its been weeks actually, since Wanam came up with the ALT version. And for some phones the standard version works too, but for Snapdragon ones its the ALT version which works. I don't have any idea about that model no. though!
Click to expand...
Click to collapse
Hi thanks for the reply. And ya was hoping someone with this model number would know the exact thing to do because samsungs have been difficult to install it on for some reason.
Mbrar15 said:
Hi thanks for the reply. And ya was hoping someone with this model number would know the exact thing to do because samsungs have been difficult to install it on for some reason.
Click to expand...
Click to collapse
Hmm, please ask about this model no. on the Xposed topic itself, http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960

Does Magisk / Systemless work with our root?

In short, Pokemon GO's new update is just taking a massive dump on it's rooted supporters and we can't play the game on the new update. Would our root be able to hide it and allow it to played on our phones with root, still?
Rooted s7 edge.... Pokémon go running strong. No issue. App is up to date.
ShadowyStorm said:
Rooted s7 edge.... Pokémon go running strong. No issue. App is up to date.
Click to expand...
Click to collapse
Are you on the new update with the buddy system? Cause the update didn't full rollout yet...
No, must not have rolled out in America. Are you running xposed?
ShadowyStorm said:
No, must not have rolled out in America. Are you running xposed?
Click to expand...
Click to collapse
Yeah I am, but I read somewhere that Magisk requires an unlocked bootloader, but I don't know if the Systemless portion is different.
Most people would say, forget the game, and keep root, but I'd like to keep both, as I've put a lot of time into the game to have this crappy company screw us like this...
If xposed and Pokémon is incredibly important to you I suggest trying the following. There's a work around for snap chat. Same scenario. You have to install and log into snap chat before installing xposed. Get it to build cache so it doesn't do the device check then install xposed. Profit. I'm not sure but it's worth a try.
I had it working then it ****ed my phone up couldn't get it again
ShadowyStorm said:
If xposed and Pokémon is incredibly important to you I suggest trying the following. There's a work around for snap chat. Same scenario. You have to install and log into snap chat before installing xposed. Get it to build cache so it doesn't do the device check then install xposed. Profit. I'm not sure but it's worth a try.
Click to expand...
Click to collapse
The problem is that the new version of poGo is using the same SafetyNet check that Android Pay does to check for root.
Apparently, the only thing that works for this is Magisk (at the moment).
The latest Pokemon Go app is using SafetyNet checks, so this goes far beyond the Snapchat workarounds.
Ah. I wasn't aware don't have the update yet
Just got it...
ShadowyStorm said:
Just got it...
Click to expand...
Click to collapse
And? You're screwed like the rest of them?
Squall429 said:
And? You're screwed like the rest of them?
Click to expand...
Click to collapse
Accurate.
So the question is can we flash magisk with flashf ire?
Or would something like rootcloak possibly work?
More and more every day I hate niansh*t and it feels like it's no different than if crapple themselves have made the app.
xdathekilljoy said:
So the question is can we flash magisk with flashf ire?
Or would something like rootcloak possibly work?
More and more every day I hate niansh*t and it feels like it's no different than if crapple themselves have made the app.
Click to expand...
Click to collapse
Root Cloak won't work. I tried that on 2 different Samsung phones :/
I'm on tekx rom and when I tried to unroot via SU my s7 edge would only boot into recovery... so I restored a backup.
It's awefully silly to keep rooted users from playing. Seems like they run out of ideas to find GPS spoofers lol
I have rooted my S7 Edge SM-G935F using chainfire-auto-root ODIN method
^ New Pokemon Go update does not work with this root method - I have used rootcloak from xposed - also does not work. You need to root using MAGISK so here is my question.
1. How do I unroot my phone that I rooted using ODIN Chainfire-Auto-Root file?
2. How do I root S7 Edge SM-G935F using "MAGISK" so i can play pokemon go after this new update?
has anybody tried rooting S7 Edge SM-G935F using MAGISK method yet? does it work? please reply and please give a guide or step by step i am a newb
JustSaif said:
I have rooted my S7 Edge SM-G935F using chainfire-auto-root ODIN method
^ New Pokemon Go update does not work with this root method - I have used rootcloak from xposed - also does not work. You need to root using MAGISK so here is my question.
1. How do I unroot my phone that I rooted using ODIN Chainfire-Auto-Root file?
2. How do I root S7 Edge SM-G935F using "MAGISK" so i can play pokemon go after this new update?
has anybody tried rooting S7 Edge SM-G935F using MAGISK method yet? does it work? please reply and please give a guide or step by step i am a newb
Click to expand...
Click to collapse
I'm afraid I have to tell you that over on reddit the developer of magisk said that Samsung devices are only supported if they're on a "custom" kernel.
Although I don't know at which point a kernel stops being stock :/
Source:
https://m.reddit.com/r/pokemongodev/comments/52j80f/hello_im_the_developer_of_magisk/
hoeni said:
I'm afraid I have to tell you that over on reddit the developer of magisk said that Samsung devices are only supported if they're on a "custom" kernel.
Although I don't know at which point a kernel stops being stock :/
Source:
https://m.reddit.com/r/pokemongodev/comments/52j80f/hello_im_the_developer_of_magisk/
Click to expand...
Click to collapse
I DID IT, I CAN PLAY POKEMON GO WITH A JOYSTICK ON MY S7 EDGE :laugh::laugh:
JustSaif said:
I DID IT, I CAN PLAY POKEMON GO WITH A JOYSTICK ON MY S7 EDGE :laugh::laugh:
Click to expand...
Click to collapse
So... You're using the NEW version with the buddy Pokemon and able to use Xposed/Joystick as well and... actually login!?!?
If so... How did you do it?
I'm curious as well. I had to reflash back to stock due to bootlooping so I'm a little more interested in this subject now that the icy plunge or returning to stock has already been made.

Favorite Xposed Modules

Just curious, what is your favorite Xposed modules for your Galaxy S7 and S7 Edges?
For the people out there with Xposed installed!
If you dont have Xposed:
http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
That thread has a version of Xposed that worked on my device, regular Xposed bricked it and I had to adb install the uninstaller to get it working again.
Im runnning Echoe Rom, on my Tmobile G930T.
Antonio11213 said:
Just curious, what is your favorite Xposed modules for your Galaxy S7 and S7 Edges?
For the people out there with Xposed installed!
If you dont have Xposed:
http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039
That thread has a version of Xposed that worked on my device, regular Xposed bricked it and I had to adb install the uninstaller to get it working again.
Im runnning Echoe Rom, on my Tmobile G930T.
Click to expand...
Click to collapse
I use all of these xposed modules...
KillerClaw321 said:
I use all of these xposed modules...
Click to expand...
Click to collapse
Tha ks, looking for some new ones to try!
Does gravitybox work on a regular s7 snapdragon with xtouchwize installed? I've read it causes boot loops, I'm worried since I can't use tworp to recover.
PatientZ3R0 said:
Does gravitybox work on a regular s7 snapdragon with xtouchwize installed? I've read it causes boot loops, I'm worried since I can't use tworp to recover.
Click to expand...
Click to collapse
No it works I have both without any issues
I use all of these. So far so good. I have it had any problems. Not everything works flawlessly, like the Google Assistant Enabler doesn't work everytime I try to run it, but at least regular Google Now on TV opens up instead.
I have a regular large tmo S7 running Echoe rom
View attachment 4039490
Here's my list on my G930T. Thanks for sharing guys. I added a few that I had forgotten about. I'm about to add GravityBox too.
Sent from my SM-G930T using Tapatalk

Categories

Resources