[Q] Flashing other firmware with odin, is it safe? - Galaxy S 4 Q&A, Help & Troubleshooting

Hello,
My phone is acting wrong so I decided to flash the stock firmware again using odin. I looked on sammobile for the correct firmware (I9500UBUBMG9) but i cannot find the exact match.
Mine says;
AP: I9500UBUBMG9
CP: I9500UBUBMG9
CSC: I9500UBUBMG9
But there is no exact match on the site, can i install the software from another country? is it safe? I am new to this and i really dont wanna lose my phone.
Cheers!

Its possible but not safe Rom has different parts...modem ...code ..etc so if you are installing a rom from another country make sure you flash all of its parts (i am no expert on this ...just what i ve read in different posts, excuse me if i am wrong)

Related

[Q] Firmware Updating I9505 ?

hi,
I have a Samsung I9505 running
(*#1234*)
AP: i9505XXUAME2
CP: I9505XXUAME2
CSC: I9505OXXAMDB
and according to "CSC Changer" I get that the CSC is NEE.
From reading various threads NEE is "Finland" but I bough my phone in Sweden!? doesn't matter much I guess but still ...
As I've rooted this phone and for some reason it wont allow OTA update as it thinks it is "custom" even tho running "Triangle Away" that says flash counter is 0 and Official and download mode saying it's Official.
Well ether way
The question I have is, can I use pre-rooted firmware with the correct CFC file ? or should I run the official firmware for the NEE (Finland) region and re-root it with CF-Root ?
I have tried searching though the various threads but can't find a clear response to this.
Happy for reponds.
paddy01 said:
hi,
I have a Samsung I9505 running
(*#1234*)
AP: i9505XXUAME2
CP: I9505XXUAME2
CSC: I9505OXXAMDB
and according to "CSC Changer" I get that the CSC is NEE.
From reading various threads NEE is "Finland" but I bough my phone in Sweden!? doesn't matter much I guess but still ...
As I've rooted this phone and for some reason it wont allow OTA update as it thinks it is "custom" even tho running "Triangle Away" that says flash counter is 0 and Official and download mode saying it's Official.
Well ether way
The question I have is, can I use pre-rooted firmware with the correct CFC file ? or should I run the official firmware for the NEE (Finland) region and re-root it with CF-Root ?
I have tried searching though the various threads but can't find a clear response to this.
Happy for reponds.
Click to expand...
Click to collapse
Or should I run the official firmware for the NEE (Finland) region and re-root it with CF-Root ?
Above option by u is a good option my friend
Hm something wierd seem to have happen to my phone.. after updating to the latest NEE firmware I seem to have no CSC anylonger? Nether *#1234# nor CSC Changer says anything about CSC ?
paddy01 said:
Hm something wierd seem to have happen to my phone.. after updating to the latest NEE firmware I seem to have no CSC anylonger? Nether *#1234# nor CSC Changer says anything about CSC ?
Click to expand...
Click to collapse
NEE is product code for Nordic Countries.
did you make the wipe after flashing?
connect to Kies and tells what about firmware.
if nothing, reflash firmware
samersh72 said:
NEE is product code for Nordic Countries.
did you make the wipe after flashing?
connect to Kies and tells what about firmware.
if nothing, reflash firmware
Click to expand...
Click to collapse
Yes, that is what is was from the begining so I thought it would be best to continue on that path.
I have not wiped anything except dalvik, yet ?
I'll Kies when I get to a comp with that installed.
paddy01 said:
Hm something wierd seem to have happen to my phone.. after updating to the latest NEE firmware I seem to have no CSC anylonger? Nether *#1234# nor CSC Changer says anything about CSC ?
Click to expand...
Click to collapse
Factory reset and flash the full rom with odin and select csc instead of pda. This should fix you issue
http://forum.xda-developers.com/showpost.php?p=35139902&postcount=6574
http://forum.xda-developers.com/showpost.php?p=35146681&postcount=6590
MichelN said:
Factory reset and flash the full rom with odin and select csc instead of pda. This should fix you issue
Click to expand...
Click to collapse
Hoped to bypass factory reset .. such a hassle to reinstall/restore everything.
Can't I just reflash CSC and nothing else ?
paddy01 said:
Hoped to bypass factory reset .. such a hassle to reinstall/restore everything.
Can't I just reflash CSC and nothing else ?
Click to expand...
Click to collapse
It will work but i always recommand to do a reset to make things sure.
MichelN said:
It will work but i always recommand to do a reset to make things sure.
Click to expand...
Click to collapse
Well were using Mobile Odin to flash the firmware so gonna try do a normal odin flash on the CSC alone and see if that fixes the issue.
Nothing seem to be malfunctioning but still annoying ..
Will see what happens after flashing CSC with Odin.
Just a question - is it possible to flash only the CSC with Heimdal ? not familiar with Heimdal but I do prefer running stuff from linux..
found no reason to do a new post so this is my result.
After flashing the same FW as CSC I got back my CSC code but it appears to have flashed everything, system-recovery-hidden and so forth.
Got a new issue though... mobile odin no longer recongizes my device.. oh well.. close enough
So after re-rooting, re-flashing recovery and triangle away binary count I seem to be back in working order with the following as *#1234#
AP: I9505XXUBMF5
CP: I9505XXUBMF
CSC: I9505OXXBMF2
and CSC Changer says my current CSC is: NEE

Please help with SM-N9005

Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
i think it means that firmware is not compatible ,but i may be wrong
jeezy85 said:
Hey people
i recently purchased a note 3 off ebay which works fine for me in the UK, however the only problem i have is the phone is flashed with chinese firmware. i basically want to reflash the firmware to the uk BTU firmware. i have downloaded
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
from sammobile.
but for some reason when going to flash in Odin, it ends up with a fail error saying the image4 invalid.
Could someone please point me in the direction to fix this?
Thanks
Click to expand...
Click to collapse
I started a simlar thread a few days back asking similar question. I am trying to flash ROM from different region and without success. so far no one has replied a way to do it. I have Vodafone ROM on my N9005 and I have managed to flash it with BTU ROM but not TGY ROM. Apparently any european ROM I can probably flash but not asia. So you is the other way round.

[Q] Anyone Successfully flashed BTU onto a different region device?

Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
jeezy85 said:
Hey
Has anyone flashed a BTU firmware onto a different region phone??
I currently have a TGY model sm-n9005 want one to flash the BTU firmware below
SM-N9005 Galaxy Note 3
PDA: N9005XXUBMJ3
CSC: N9005OXABMJ3
MODEM: N9005XXUBMJ2
over my
SM-N9005 Galaxy Note 3
PDA: N9005ZHUBMI7
CSC: N9005ZZHBMI7
MODEM: N9005XXUBMI5
I keep getting invalid ext4 img
Please if anyone knows how to get around this will really really appreciate it. (i am willing to donate to the person who solves this )
Click to expand...
Click to collapse
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
weasley said:
Im the other way around I want to Flash TGY into my BTU device as I need the chinese input
Click to expand...
Click to collapse
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
toker_X1 said:
To flash cross regional fimrware you need to change you CSC code.
http://forum.xda-developers.com/showthread.php?t=2491877
Also if you flash MJ3 build then your bootloader will be upgraded and you have to stay will MJ3 firmware, you cant then downgrade back to MJ1 firmware
Click to expand...
Click to collapse
BUMP
any luck anyone? still getin ext4 error
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Sent from my SM-N9005 using XDA Premium 4 mobile app
patrick92260 said:
I want to know this as well. I have Malaysian fw on my phone but I want to switch to BTU. According to what I have read this should work because my current region is XX, however I have seen way too many people getting this ext4 error for me to try it.
Can someone give a definitive answer? I am on MJ3 with a region of XX. Thanks!
Click to expand...
Click to collapse
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
perosredo said:
I'd like to know as well - my original firmware particulars read N900W8VLUBMJ1_N900W8OYABMJ1_N900W8VLUBMJ1_HOME.tar
Click to expand...
Click to collapse
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
ultramag69 said:
Flashed MJ6 onto my malaysian Note 3 successfully, though once there haven't been able to change my CSC since... Also MJ6 has the new bootloaders and I now have warranty void 0x1...
My CSC code was XME, now BTU....
Click to expand...
Click to collapse
How did you flash it to void warranty?
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
Stay away from Kingo/vroot, xda has removed all links and closed the thread. It's full of malware / spyware and will send all personal details to a Chinese Web server.
Sent from my SM-N9005 using Tapatalk
ultramag69 said:
wilflare said:
sorry to hijack
but what does BTU stand for?
and what's the two letters before MJ7?
like UBMJ7, what's UB?[/QUOTE
CSC code for UK (no carrier) = BTU.
Revision of Android - MJ7, latest version released as of yet...
Not sure about the rest but it appears regional...
Flashed it after running through RDLV but had issues with WIFI and sd card... Flashed extracted modem from MJ6 rom, this sent me into a bootloop. Flashed stock MJ6 rom onto phone and fixed the bootloop but put new bootloaders on. At this point warranty void was 0x0. Tried Kingoapp to root hoping it wouldn't trip counter, it did...
New bootloaders are a mongrel....
Click to expand...
Click to collapse
this was my original PTN Firmware
ap= n9005xxubmj3
cp=n9005xxubmj2
csc=n9005phnbmj3
if just flashed it, with odin to the udmj7 firmware
ap= n9005xxudmj7
cp=n9005xxubmj2
csc=n9005oxadmj4
so far so good !! , still no random reboots ( i had before with the ubmj3 firmware )
Click to expand...
Click to collapse
just changed my firmware from xme to btu
just follow these from the s4 forum by kaushalls but use odin 3.04 and be patient it may fail for two time but will eventually will do it and run odin in normal mode not administrator mode
Make sure you take a backup via Kies if you need personal files
Download the respective stock ROMS from sammobile.com or samsung-updates.com or see thread on Stock Roms on XDA
Extract zip to get tar.md5
Put device into download mode (Vol down+ Home + Power) and Flash using Odin (PDA option)
Wait till device reboots back into Android after completing the flash and recovery
Once device reboots, do a Factory Reset via back up and reset option
Once device reboots after Factory Reset/recovery, enter the google account info and restore settings and then turn off the device
and restart (go into recovery and see the csc btu being applied if yes then stop here,do factory reset and restart)
after this the next steps are optional
Boot device back into download mode (Vol down+ Home + Power)
Re-flash the same downloaded firmware for a second time via Odin
Once the device reboots after the 2nd flash, your CSC should have changed to the CSC of the ROM you downloaded, and Kies also should show that CSC has changed and it should allow future updates via Kies or OTA
check csc by going to stock recoverry it will show manual mode at the bottom and then show btu csc applied
i am now on xxumdj6

[Q][i9505][Official Firmware] - United Kingdom (BTU)

Hi everyone,
first of all i hope it`s not a double thread, I could not find any BTU discussion of 4.3.
I`m getting really lost in this OTA / Kies compatibility over here..
My S4 was rooted now I`m trying to restore it to official state to make it OTA update compatible again.
The phone was bought in UK, GSM phone.
There was a matching firmware, which should be compatible for updates here, but i keep getting the same "Your firmware is not supported..." error message again and again.
Details:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ7
CSC: I9505BTUEMJ8
Current binary: Samsung Official
System status: Official
Later on 2nd try:
AP: I9505XXUEMJ7
CP: I9505XXUEMJ8
CSC: I9505BTUEMJ8
Current binary: Samsung Official
System status: Official
So far after trying to help my problem with Google all I got, that I9505XXUEMJ7+I9505XXUEMJ7+I9505BTUEMJ8 is the latest official state and BTU is for the UK.
If someone could explain what is wrong here, I would be very happy.
Thanks.
Thread says the same, that I`m using the correct version
http://forum.xda-developers.com/showthread.php?t=2265477
Is my question so stupid or is it an unique problem that I have so no one will reply?
Maybe I'm missing something here but have you reverted to stock, stock recovery and Triangle Away first. You cannot receive OTA updates or Kies if your device is rooted or has a custom recovery etc...
Yes, Triangle away done, stock rom, stock recovery.
Cool, is BTU the correct firmware for you? Are you on a different carrier there? Can you flash the stock ROM you want through ODIN? (gotta run for lunch but I'm sure someone better than I will help)
restock
put phone into download mode
open kies select firmware upgrade initialisation
enter model number and serial number in capitals
make sure both are correct you can find it on the box or under the battery.
Thanks everyone, I`m gonna do it all over again this evening. BTU is correct for me, its unbranded gsm unlocked phone from UK.
Edit: Boring day in job here.. redone the whole thing and it works now.
Thank you everyone, again.

What does "could not locate csc data package?"

I have a Galaxy Note 3 (SM-N900), which is absolutely genuine, but purchased from China, so it is therefore “Region Locked”. I have tried to get this ‘unlocked’ by various companies advertising on Ebay etc, but they are unable to do so. I Downloaded the “Region Lock Away” successfully, and then when I press “Region Unlock”, I am given the message: “Could not locate CSC data! You could try flashing a CSC package to correct this”. So my question obviously is, how do I do this, especially as I am somewhat nervous at anything more involved, (i.e. ‘Rooting’ etc). Any and all help will be appreciated.
The CSC package is inside file cache.img from one Rom.
Look the attach img from N900 (files from Rom to flash by Odin), there are two files cache.img + hidden.img.
Making a Mod csc.tar.md5 whit this two files from one Rom having Your CSC, we can flash it by Odin in csc and we have it installed.
This example attached have only the csc SER from Russia.
Thank you Valente for your reply, it is appreciated, but please could I ask how in simple steps I actually do this.......you are dealing with a 66 year old here!!
My kindest regards,
Bernard
Well, in Portugal the N900 is not sale only N9005 then I only give You some idea. But this isn't so simple.
First You must give me what is Your Rom working. On phone keyboard type *#1234# (may be return) and You have the AP, CP and CSC
Send me this. Then what Your CSC and Carrier/Operator to see from what Rom we must extract the cache.img.
Your N900 must have the 4.3 then the Knox also, it's true? If yes it have the Knox botloader and on Odin sometimes isn't possible to flash for example a csc_version OXX or OXA from UK over one for Chine like ZC, Knox bootloader not permit because region not compatible.
Send me that data to see what is possible. Alright?
PS: You have access root already?
ValenteL said:
Well, in Portugal the N900 is not sale only N9005 then I only give You some idea. But this isn't so simple.
First You must give me what is Your Rom working. On phone keyboard type *#1234# (may be return) and You have the AP, CP and CSC
Send me this. Then what Your CSC and Carrier/Operator to see from what Rom we must extract the cache.img.
Your N900 must have the 4.3 then the Knox also, it's true? If yes it have the Knox botloader and on Odin sometimes isn't possible to flash for example a csc_version OXX or OXA from UK over one for Chine like ZC, Knox bootloader not permit because region not compatible.
Send me that data to see what is possible. Alright?
PS: You have access root already?
Click to expand...
Click to collapse
Thank you Valente....you are very kind, and I have to say, you English is very good. I will try to answer as best as I can.
The 3 references are:
AP: N9000ZCUBMI5
CP: N9000ZCUBMI3
CSC: N9000CHNBMI5
My SIM is with Orange (United Kingdom).
I am not sure what else you may need, but I have not "Rooted" the phone other than to download the "Region Lock Away" app.
Thank you again,
Bernard
Bernard Warner said:
Thank you Valente....you are very kind, and I have to say, you English is very good. I will try to answer as best as I can.
The 3 references are:
AP: N9000ZCUBMI5
CP: N9000ZCUBMI3
CSC: N9000CHNBMI5
My SIM is with Orange (United Kingdom).
I am not sure what else you may need, but I have not "Rooted" the phone other than to download the "Region Lock Away" app.
Thank you again,
Bernard
Click to expand...
Click to collapse
This is not good. Your Model is a SM-N9000 and not a SM-N900. Is a Chinese Model unknown on Sammobile.
See on Settings / General / About Device... You must have Model number SM-N9000. True?
In this case You not have anything on Sammobile to this device.
See here: http://www.sammobile.com/firmwares/ write N9000 on white box on top right and You see N9000Q nothing for N9000
Anyway if You write there N900 You see many Rom's for many Countries but not for UK. There aren't UK CSC's for N900.
The Rom is a ZC, You can't flash anything from European XX Rom´s over it. And it have a single csc=CHN not have a Multi CSC (a CSC package). I unknown solve Your problem.
In this case I can't help You, is very difficult. Sorry.
Samsung S4 Mini i9195
ValenteL said:
The CSC package is inside file cache.img from one Rom.
Look the attach img from N900 (files from Rom to flash by Odin), there are two files cache.img + hidden.img.
Making a Mod csc.tar.md5 whit this two files from one Rom having Your CSC, we can flash it by Odin in csc and we have it installed.
This example attached have only the csc SER from Russia.
Click to expand...
Click to collapse
Boa Noite Valente.
Can u give me some help?
i have a samsung galaxy s4 mini and i need to region unlock it.
When i use regionlock away it gives me the message that im missing a csc package!
Can you help me wit this matter?
Dont know if talking in english is a rule in this chat xD im portuguese too =)

Categories

Resources