How to enter recovery... - G2 Q&A, Help & Troubleshooting

What are the button combinations to enter recovery on this phone? I have googled and looked in other threads, but it apparently is just assumed everyone knows this.
Thanks in advance
Sent from my VS980 4G using Tapatalk 4

If you are rooted, Titanium Backup, Goo Manager, Power Reboot...These are all applications in the Play Store. As far as using the buttons, I am sure they have worked out the issues using the hardware buttons, but I don't do it that way. Hope this helped!!

For TWRP press and hold the power and volume down button. When the LG logo pops up let go for a second and press the combo again. You'll be prompted to press the power button 3 times to wipe the device. Then It'll boot into TWRP without wiping.

anpan879 said:
For TWRP press and hold the power and volume down button. When the LG logo pops up let go for a second and press the combo again. You'll be prompted to press the power button 3 times to wipe the device. Then It'll boot into TWRP without wiping.
Click to expand...
Click to collapse
I don't have TWRP . WHAT CAN I DON TO GET HE RECOVERY MODE COZ I'M STOCKED IN A LOOP AND CANT GET MY PHONE STARTED NORMALLY.
ANY ONE CAN HELP PLEASE??

Flash back to stock is the only solution. Been there done that. After you get rooted and newest twrp you won't have to worry again going forward.
Sent from my Nexus 7 using Tapatalk 2

mahmoudwifi said:
I don't have TWRP . WHAT CAN I DON TO GET HE RECOVERY MODE COZ I'M STOCKED IN A LOOP AND CANT GET MY PHONE STARTED NORMALLY.
ANY ONE CAN HELP PLEASE??
Click to expand...
Click to collapse
If you have the Verizon version, do this:
http://forum.xda-developers.com/showthread.php?t=2448960
If you have any other version (AT&T, ect), do this:
http://forum.xda-developers.com/showthread.php?t=2432476

thank you so much for your fast reply.
what I need and meant by recovery mode is where i can format the rom and restore the factory setting when i fail to log in the operating system ( usually was VOLUME DOWN AND POWER BUTTON to get it ) but this method is not working here.

Related

Custom Recovery Won't Open

Hello,
I'm having a issue with Custom Recovery.
I've tryed to install both (CWM and TWRP).
The thing is when I turn off my device to
turn it on again pressing Vol Up + Power + Home I got a message saying "Recovery Booting". But the recovery doesnt start, instead my phone vibrate and begins to boot normally. It doesnt enter in custom recovery mode.
I was hoping someone could help me on this.
My device:
Stock ROM
Root (Edited to get rid of Custom status)
1337UCUAMDL
Does anyone know how to unistall a custom recovery or have any idea why this is happening?
By the way I followed this steps
http://forum.xda-developers.com/showthread.php?t=2314494
Thanks
Are you letting go of the power button when the device vibrates?
This is how I get in recovery...while phone is on, long press power button for power menu, press restart...than only hold the volume up while it restarts and nothing else, it will than boot into recovery
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
mg2195 said:
This is how I get in recovery...while phone is on, long press power button for power menu, press restart...than only hold the volume up while it restarts and nothing else, it will than boot into recovery
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
have you tried re-flashing the recovery?
Have you tried downloading one of the simple reboot tools that let you choose to reboot recovery?
Thanks for the help guys.
So I tried enter in recovery thru CWM option (Restart in Recovery) it worked.
But it doesnt work when I try manually (vol up + home + power). I really dont know why.
I'm afraid flashing a custom rom doing this way, because if something goes wrong I wont be able to acess the costume recovery.
Is there a way to unisitall the custom recovery?
Vinao said:
Thanks for the help guys.
So I tried enter in recovery thru CWM option (Restart in Recovery) it worked.
But it doesnt work when I try manually (vol up + home + power). I really dont know why.
I'm afraid flashing a custom rom doing this way, because if something goes wrong I wont be able to acess the costume recovery.
Is there a way to unisitall the custom recovery?
Click to expand...
Click to collapse
you can flash cwm touch using loki from my thread process is simple and easy files included
http://forum.xda-developers.com/showthread.php?t=2384388
Vinao said:
Thanks for the help guys.
So I tried enter in recovery thru CWM option (Restart in Recovery) it worked.
But it doesnt work when I try manually (vol up + home + power). I really dont know why.
I'm afraid flashing a custom rom doing this way, because if something goes wrong I wont be able to acess the costume recovery.
Is there a way to unisitall the custom recovery?
Click to expand...
Click to collapse
when you see that blue text, and even right before that when your s4 vibrates, are you releasing just the power button? also, have you tried mg2195's suggestion? what recovery are you currently running?
Just flash a different recovery using the one u have.when I first rooted my S4 I used ROM manager ,it had the T-Mobile S4 option so I tapped it and it flashed CWM .after reading about "Loki"I decided to go with the auto Loki .I downloaded the auto Loki and flashed it with the recovery I got from ROM manager.not one problem and I like MDOB MF3 rom
Sent from my SAMSUNG-SGH-I337 using xda premium
Vinao said:
Hello,
I'm having a issue with Custom Recovery.
I've tryed to install both (CWM and TWRP).
The thing is when I turn off my device to
turn it on again pressing Vol Up + Power + Home I got a message saying "Recovery Booting". But the recovery doesnt start, instead my phone vibrate and begins to boot normally. It doesnt enter in custom recovery mode.
I was hoping someone could help me on this.
My device:
Stock ROM
Root (Edited to get rid of Custom status)
1337UCUAMDL
Does anyone know how to unistall a custom recovery or have any idea why this is happening?
By the way I followed this steps
http://forum.xda-developers.com/showthread.php?t=2314494
Thanks
Click to expand...
Click to collapse
This is actually a common problem for some reason. There's an easy workaround:
Long press the power button and choose "power off". Give your phone a few seconds to turn off completely. Once it's off, press and hold these 3 buttons at the same time: POWER+VOLUME UP+HOME. Look at the top left of the screen - as soon as you see little blue text saying entering recovery, let go of all buttons immediately...but be ready...if your phone vibrates (it might be trying to reboot normally again), press and hold those same buttons again until you see the blue text again...then let go immediately. Now you will see your recovery!
Alternatively, when I'm not on a custom ROM that has the reboot options mod built in, I use this app to get to recovery/bootloader easily:
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot

S4 won't boot into cwm recovery

Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
bboyimpact33 said:
Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
In Developer options, enable the Advanced Reboot.
The 3 button combo will work, it's just a matter of timing. Remove and replace the battery, hold vol up + home, then power, holding all three, and when it vibrates, let go of power only.
You could also hook up in USB Debugging mode and issue the command:
adb reboot recovery
And if you don't have a developer option go into about phone and tap build number 7 times.
<=LongJohnSilver=> said:
In Developer options, enable the Advanced Reboot.
The 3 button combo will work, it's just a matter of timing. Remove and replace the battery, hold vol up + home, then power, holding all three, and when it vibrates, let go of power only.
You could also hook up in USB Debugging mode and issue the command:
adb reboot recovery
Click to expand...
Click to collapse
Some people, including myself, cannot get it to work with the standard procedure...the solution is to basically do it twice. Here's a copy/paste of the instructions:
Long press the power button and choose "power off". Give your phone a few seconds to turn off completely. Once it's off, press and hold these 3 buttons at the same time: POWER+VOLUME UP+HOME. Look at the top left of the screen - as soon as you see little blue text saying entering recovery, let go of all buttons immediately...but be ready...if your phone vibrates (it might be trying to reboot normally again), press and hold those same buttons again until you see the blue text again...then let go immediately. Now you will see your recovery!
jeffreii said:
Some people, including myself, cannot get it to work with the standard procedure...the solution is to basically do it twice. Here's a copy/paste of the instructions:
Long press the power button and choose "power off". Give your phone a few seconds to turn off completely. Once it's off, press and hold these 3 buttons at the same time: POWER+VOLUME UP+HOME. Look at the top left of the screen - as soon as you see little blue text saying entering recovery, let go of all buttons immediately...but be ready...if your phone vibrates (it might be trying to reboot normally again), press and hold those same buttons again until you see the blue text again...then let go immediately. Now you will see your recovery!
Click to expand...
Click to collapse
Cool
CWM recovery only requires you to push the volume up key and then press the power key until the phone vibrates and then let go of the power button only. When the blue lettering appears, let go of the volume up. The home button should only be required with TWRP.
scott14719 said:
CWM recovery only requires you to push the volume up key and then press the power key until the phone vibrates and then let go of the power button only. When the blue lettering appears, let go of the volume up. The home button should only be required with TWRP.
Click to expand...
Click to collapse
Whatever the reason, that is not the case with my phone and many others. I've read several threads of people having the same issue. I'm not sure if it's an issue with the OUDHS CWM w/ auto-loki or what.
I've never heard of letting go of the power button only while still pressing volume up, but I gave it a try just to see...it did get me into CWM recovery but only after doing it twice, similar to the method I wrote above.
I have tried letting go of both volume up and power (no pressing home at all) and never found a way to get into recovery.
Anyways, it seems there's no harm in pressing the home button either way and it's probably easier than letting go of the power button and still holding volume up...and easier to explain too lol.
jeffreii said:
Whatever the reason, that is not the case with my phone and many others. I've read several threads of people having the same issue. I'm not sure if it's an issue with the OUDHS CWM w/ auto-loki or what.
I've never heard of letting go of the power button only while still pressing volume up, but I gave it a try just to see...it did get me into CWM recovery but only after doing it twice, similar to the method I wrote above.
I have tried letting go of both volume up and power (no pressing home at all) and never found a way to get into recovery.
Anyways, it seems there's no harm in pressing the home button either way and it's probably easier than letting go of the power button and still holding volume up...and easier to explain too lol.
Click to expand...
Click to collapse
I'm having the same problem.
Have you found an answer or work around solution yet?
GS4 AT&T
Base version: I337UCUAMF3
Kernel: 3.4.0-812098
CWM Recovery: 6.0.3.6
rooted with SD format
Never been able to flash the rom successfully
cariboucar said:
I'm having the same problem.
Have you found an answer or work around solution yet?
GS4 AT&T
Base version: I337UCUAMF3
Kernel: 3.4.0-812098
CWM Recovery: 6.0.3.6
rooted with SD format
Never been able to flash the rom successfully
Click to expand...
Click to collapse
You need to read... Seriously, you are going to brick your phone. Do not try to install any custom recovery or ROM of any kind on MF3.
Why can't people read?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
bboyimpact33 said:
Okay so I have the cyanogen mod flashed on my s4. But for some reason now it won't boot into cwm recovery. Any ideas?
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
My minor issue is that when I boot to recovery (twrp) it get to the twrp splash screen then freeze. Takes me another reboot or two before recovery really launches.
Tried reinstalling recovery and fixing permission, etc.. but same deal. Anyone have thoughts on this?
I boot into recovery all the time but I have to hold volume up and home button.
Bump!
I'm having the same issue. What I did was that I had the CWM recovery installed and tried to reset the flash counter. Now the phone won't boot into the recovery, it just boots up as usual when I press vol up+home+power up. I appreciate any help! :/
metalfr33ak said:
Bump!
I'm having the same issue. What I did was that I had the CWM recovery installed and tried to reset the flash counter. Now the phone won't boot into the recovery, it just boots up as usual when I press vol up+home+power up. I appreciate any help! :/
Click to expand...
Click to collapse
Can you get the blue text in the upper left corner of the screen to appear at any time?
In my case, trying to get into recovery via the 3 buttons is a matter of very precise timing if I try pressing all 3 buttons at the same time. The instant I see the blue text I let go of everything and it works. Hold it for even a fraction of a second longer and the blue disappears and it goes into a normal boot. It works much better if I press Vol Up, then add Power, then add Home. I'm doing that sequence fairly quickly but the point is I'm not trying to press 3 buttons at the exact same time.
But I'm using CWM so I don't need the 3rd button...
From a powered-down state I hold Vol Up then Power and hold both through the vibration until the blue text appears and it goes into CWM recovery just fine. There seems to be a bit more leeway in terms of how fast you need to let go this way although I just tested and holding about a half second too long caused it to bounce out of recovery and do a normal boot. Let go immediately when you see the blue.
Phone won't boot..
So after using CASUAL, my phone rebooted, and got stuck on the splash screen with RECOVERY BOOTING.. in the top left corner. I pull the battery, try to do a normal reboot; takes me to the same screen. Trying the 3 button combo for recovery; same thing. Any suggestions?? I am NOT on MF3 Firmware.
**EDIT** Should have looked into it more before posting, but Found my solution returning to STOCK
im having the same problem.. i rebooted using ROM MANAGER and the android with red exclamation mark appeared... when i hold de buttons, there are blue letters, but the recovery mode dont work, just the android recovery...
edgarzin said:
im having the same problem.. i rebooted using ROM MANAGER and the android with red exclamation mark appeared... when i hold de buttons, there are blue letters, but the recovery mode dont work, just the android recovery...
Click to expand...
Click to collapse
What is the baseband version on your phone?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
guitarpunk8403 said:
What is the baseband version on your phone?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
hey man.. thanks for replying, baseband is MDL.. since CWM wasnt working, i installed TWRP and it is working. It offers the same results right? Im want to flash a 4.4.2 rom...
thanks.
It should....I'm stuck on safestrap, but I always used TWRP on my S3
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Locoman_ said:
My minor issue is that when I boot to recovery (twrp) it get to the twrp splash screen then freeze. Takes me another reboot or two before recovery really launches.
Tried reinstalling recovery and fixing permission, etc.. but same deal. Anyone have thoughts on this?
Click to expand...
Click to collapse
Same with my gionne ctrl v4s lollipop stock ,when i flash cwm made by mirchifood convertor but then i flash that stock recovery it works
But i really want cwm ir twrp to installl supersu and do backups

Can anyone tell me what's the deal with twrp recovery with sprint Lg G2.

If I have you is there a method to get Twrp recovery and when I get recovery how do I get in recovery.
Sent from my SPH-L710 using XDA Premium 4 mobile app
LG G2 Rebooting into Recovery
If you have TWRP installed already:
Method 1: In a terminal emulator as root type "reboot recovery"
Method 2: Using an app like Quick Boot
Method 3: Hardware buttons on the G2 - From a power off state hold Power and Volume Down. When you see the LG logo continue holding volume down and release the power button and press it again. It will bring you to a factory reset screen. If you have TWRP installed confirm a factory reset and it will take you to TWRP without wiping your device. If you do not have TWRP installed DO NOT DO THIS if you want to keep your data.
This works on my Verizon G2 but I believe the method is the same for Sprint.
I am so confused OP. What is the problem again? You didn't give any description to the issue or concern.
Doing research I have pre-order ed my G2 I currently have a s3 I do a lot of flashing. I want to be informed on the how to. I used to have a optimus g and I did achive root on that device. But I bricked it trying to get recovery. Dont want to make the same mistakes. .
Sent from my SPH-L710 using XDA Premium 4 mobile app
smb209 said:
If you have TWRP installed already:
Method 1: In a terminal emulator as root type "reboot recovery"
Method 2: Using an app like Quick Boot
Method 3: Hardware buttons on the G2 - From a power off state hold Power and Volume Down. When you see the LG logo continue holding volume down and release the power button and press it again. It will bring you to a factory reset screen. If you have TWRP installed confirm a factory reset and it will take you to TWRP without wiping your device. If you do not have TWRP installed DO NOT DO THIS if you want to keep your data.
This works on my Verizon G2 but I believe the method is the same for Sprint.
Click to expand...
Click to collapse
The Sprint method is slightly different. From http://support.sprint.com/support/tutorial/Perform_a_hardware_factory_reset_LG_G2/49589-396:
With the Volume Down key held, press and hold the Power key.
Release both keys when the Home, Back, and Menu keys light up
Click to expand...
Click to collapse
I didn't see the Home, Back, and Menu keys light up, but when the recovery mode screen came up I released the buttons.
Best of luck!

Booting into recovery.

I do not know if this has been covered and I missed it, or if it is even possible. I was trying to boot into recovery to clear the cache. I have the T-Mobile V20. I can get it to the factory reset screen, but it only deletes the data on the phone. Does anyone have any information on how to do this, or what I am missing? I appreciate the help. Sorry if this is in the wrong place.
You gave to have TWRP to do that. Haven't gotten that far yet. Phone is brand new. Give it 2-3 weeks.
Sent from my LG-H918 using Tapatalk
Ok, so there is no stock recovery like with the S7 and Note 7? Thanks.
What exactly are you talking about when you mean recovery? I mean you are able to get into a recovery mode screen that lists things such as 'reboot to bootloader', 'sideload from adb', 'sideload from sdcard', 'factory reset', and like a cache clear. But I dont know if that's what youre looking for.
jayrodclg said:
I do not know if this has been covered and I missed it, or if it is even possible. I was trying to boot into recovery to clear the cache. I have the T-Mobile V20. I can get it to the factory reset screen, but it only deletes the data on the phone. Does anyone have any information on how to do this, or what I am missing? I appreciate the help. Sorry if this is in the wrong place.
Click to expand...
Click to collapse
Go to settings, then general, then storage and click on internal. You will see the cache and clear it after it calculates.
open developer options, enable usb debugging, and with adb on your PC type adb reboot recovery then hold power and volume up when the little android dude appears.
He may be referring to the OEM stock LG recovery. In the stock recovery you can wipe data/factory reset or clear cache partition. You can get to this recovery by using certain button combos before there phone powers past the bootloader.
cordell12 said:
open developer options, enable usb debugging, and with adb on your PC type adb reboot recovery then hold power and volume up when the little android dude appears.
Click to expand...
Click to collapse
This is the answer.
djnikkofb said:
He may be referring to the OEM stock LG recovery. In the stock recovery you can wipe data/factory reset or clear cache partition. You can get to this recovery by using certain button combos before there phone powers past the bootloader.
Click to expand...
Click to collapse
what is the button combo? ive been trying with holding a diff number of combinations, no luck.. I get a white screen with 2 sets of imei barcodes... Verizon lg v20
There's your problem Verizon...the instructional button presses I was referring to is for H918 T-MOBILE. Verizon variant may be different, which also may require "Verizon LG v20 drivers."
Sent from my LG-H918 using Tapatalk
cordell12 said:
open developer options, enable usb debugging, and with adb on your PC type adb reboot recovery then hold power and volume up when the little android dude appears.
Click to expand...
Click to collapse
OR, from Terminal Emulator just "reboot recovery"
i found the button combination to get into recovery mode.
Start by turning off your phone.
Don’t reboot it – just press on the Power key and select “power off” or press and hold the Power key for a few moments.
Wait while the shut down process is completed.
Then, press and hold (at the same time and for a few moments) the Volume Down and Power buttons.
When the LG Logo is displayed, release the Power Key but keep pressing the Volume Down button; while doing so press only once the Power button.
Release all the keys as soon as the recovery mode menu is displayed on your LG V20.
I have tried multiple versions of the combinations on my tmobile one and can never get into my twrp that way. I just use titanium backup for now
KUSOsan said:
I have tried multiple versions of the combinations on my tmobile one and can never get into my twrp that way. I just use titanium backup for now
Click to expand...
Click to collapse
You can also access it via fastboot mode commands. By typing adb reboot recovery. But if you dont have twrp installed, then you will be taken to the white screen and your data will be deleted
KUSOsan said:
I have tried multiple versions of the combinations on my tmobile one and can never get into my twrp that way. I just use titanium backup for now
Click to expand...
Click to collapse
Make sure you have the latest TWRP installed. 3.0.2-1 I believe. From off its vol down+power, see LG logo let go of power for 1 second then push and hold again(so both buttons will be pressed again, not just vol down) select "yes" to both options that pop up, (and no it won't wipe anything.) It will boot into TWRP as soon as you select yes to the second option. I have TMO as well and it works every time. The latest TWRP is the only one that u can boot into recovery from powered off
dfogelstrom said:
Make sure you have the latest TWRP installed. 3.0.2-1 I believe. From off its vol down+power, see LG logo let go of power for 1 second then push and hold again(so both buttons will be pressed again, not just vol down) select "yes" to both options that pop up, (and no it won't wipe anything.) It will boot into TWRP as soon as you select yes to the second option. I have TMO as well and it works every time. The latest TWRP is the only one that u can boot into recovery from powered off
Click to expand...
Click to collapse
Are you talking about the screen that says press power button to pause boot?
KUSOsan said:
Are you talking about the screen that says press power button to pause boot?
Click to expand...
Click to collapse
No when you do the button combo properly a while screen will pop up and ask if you want to factory reset. You select "yes" both times and you will boot into TWRP. You have to have the latest 3.0.2-1 TWRP installed in order to get to recovery from power off. The button combo 100% works. Again, vol down + power. When you see LG let go of power but not vol down for one second and then press and hold power(now both buttons) until that white screen pops up. If it doesn't, you either don't have TWRP installed or not the latest version.
You manually installed TWRP, correct?Are you rooted?
dfogelstrom said:
No when you do the button combo properly a while screen will pop up and ask if you want to factory reset. You select "yes" both times and you will boot into TWRP. You have to have the latest 3.0.2-1 TWRP installed in order to get to recovery from power off. The button combo 100% works. Again, vol down + power. When you see LG let go of power but not vol down for one second and then press and hold power(now both buttons) until that white screen pops up. If it doesn't, you either don't have TWRP installed or not the latest version.
You manually installed TWRP, correct?Are you rooted?
Click to expand...
Click to collapse
Yeah I can access it through terminal, adb or any app that has a shortcut like titanium backup but I have yet to be able to do it through the button combination for whatever reason lol. I'm 99% sure its the correct twrp version and I am rooted. Ill double check the twrp version in a bit. Thanks for the help
KUSOsan said:
Yeah I can access it through terminal, adb or any app that has a shortcut like titanium backup but I have yet to be able to do it through the button combination for whatever reason lol. I'm 99% sure its the correct twrp version and I am rooted. Ill double check the twrp version in a bit. Thanks for the help
Click to expand...
Click to collapse
Yeah, check your version in TWRP. If it's not 3.0.2-1 you can get the latest in jcaduono's dirty cow rooting thread
dfogelstrom said:
Yeah, check your version in TWRP. If it's not 3.0.2-1 you can get the latest in jcaduono's dirty cow rooting thread
Click to expand...
Click to collapse
Just tried it again and still couldnt do it with the buttons. Used titanium backup to boot into twrp and its the correct version as you said. Am I doing the button combo on the 1st LG screen or on the 2nd one that pops up after the screen that says cant verify boot press power button to pause boot? It should be on the 1st LG one that shows up based on what I've read so far but maybe I'm mistaken?? No clue at this point. You said release for a second and ive done that plus many other variations of timing and I just plain suck at this I guess lol.

H918 Issue...

So a Tmobile update came on my phone and I decided to click update for some stupid reason... Its early.
I was stock rooted with TWRP installed.
After clicking that it rebooted and went into TWRP recovery. Whether I reboot or turn off and manually go into recovery I can't get it to reboot normally whatsoever.
I tried to flash WETA rom and everything went properly with the install but affter the reboot I am still left with TWRP.
Any suggestions on how to get my phone working again. I am downloading the 10i KDZ file now but was hoping there was another answer.
Thanks for any help or suggestions.
jrosetto said:
So a Tmobile update came on my phone and I decided to click update for some stupid reason... Its early.
I was stock rooted with TWRP installed.
After clicking that it rebooted and went into TWRP recovery. Whether I reboot or turn off and manually go into recovery I can't get it to reboot normally whatsoever.
I tried to flash WETA rom and everything went properly with the install but affter the reboot I am still left with TWRP.
Any suggestions on how to get my phone working again. I am downloading the 10i KDZ file now but was hoping there was another answer.
Thanks for any help or suggestions.
Click to expand...
Click to collapse
Power off or pull battery for a sec.
Hold vol down and power button - as soon as you see LG logo - release and immediately re-press power button only while continuing to hold vol down.
Factory reset screen will come up if you did it right. Use vol down to select YES twice to factory reset. ( It won't really reset anything but the recovery boot trigger ).
You'll end up in twrp. Just select reboot system and profit
Sent from my LG-H918 using XDA-Developers Legacy app
Chance Ill said:
Power off or pull battery for a sec.
Hold vol down and power button - as soon as you see LG logo - release and immediately re-press power button only while continuing to hold vol down.
Factory reset screen will come up if you did it right. Use vol down to select YES twice to factory reset. ( It won't really reset anything but the recovery boot trigger ).
You'll end up in twrp. Just select reboot system and profit
Sent from my LG-H918 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Thanks for posting this. Same thing just happened to me and now my phone is back to normal.

Categories

Resources