worst battery back up - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

i am using cm7.2 reincarnation's rom with flyonmod beta 3 n v6 supercharger but i am not getting even normal battery backup with 3g if i open Google only my battery is drained by 2-4% plzzz help.
Sent from my GT-S5360 using Tapatalk 2

Get the app 'No frills CPU control'
Change the governor to blackcats or ondemand
hit thanks

sanchit0403 said:
i am using cm7.2 reincarnation's rom with flyonmod beta 3 n v6 supercharger but i am not getting even normal battery backup with 3g if i open Google only my battery is drained by 2-4% plzzz help.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Try to calibrate your bAttery or the tweaks you have installed conflicts with each other. . Try to use one at a time. .

jamstar.5 said:
Get the app 'No frills CPU control'
Change the governor to blackcats or ondemand
hit thanks
Click to expand...
Click to collapse
i am all ready on blackcats
Sent from my GT-S5360 using Tapatalk 2

sanchit0403 said:
i am all ready on blackcats
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Arrey pleasw go to general section>Tweaks for your Young and flash Unlimited Boost V6!

Related

Overclocking official 2.1

Is there any chance of overclocking official 2.1 rom
Sent from my GT540 using XDA App
mohnim said:
Is there any chance of overclocking official 2.1 rom
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
Yeah, install Quarx Kernel, MMXTREM kernel etc.
How do I install the kernel
Sent from my GT540 using XDA App
mohnim said:
How do I install the kernel
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
Flash the zip in recovery (for MMXTREM)
does anyone if it is safe to underclock??
About (122MHz ~ 245MHz)
Probably
It's stable on 122mhz on mine. But it's super slow and laggy. But battery saving
y
jhonnyx1000 said:
It's stable on 122mhz on mine. But it's super slow and laggy. But battery saving
Click to expand...
Click to collapse
So is it safe???
Or should I just put it to powersave mode??
I heard that it may decrease ur phones battery life. And from others that u need to put it at least to 245MHz so that the system can run!
Sent from my GT540 using Tapatalk
safe on mine
122mhz works on mine and is very consistent. It never crashed on that frequency. Don't know if it'll work on other phones.
Anyways thanks gonna underclock!!!
Sent from my GT540 using Tapatalk
I would also say two hundred better safe than sorry
Also battery on mine at eight hundred mega hertz is still eight or nine hours so really its only if you had no charger for longer than that that you would under clock
Sent from my GT540 RSpec using XDA App
Danzano said:
I would also say two hundred better safe than sorry
Also battery on mine at eight hundred mega hertz is still eight or nine hours so really its only if you had no charger for longer than that that you would under clock
Sent from my GT540 RSpec using XDA App
Click to expand...
Click to collapse
my phones usually lasts about 2 and a half days!!
I've noticed that the battery level is very unstable. For example the LG Optimus 2x's battery level changes every 1% but on the LG-GT540 it changes every 3-10%
jhonnyx1000 said:
I've noticed that the battery level is very unstable. For example the LG Optimus 2x's battery level changes every 1% but on the LG-GT540 it changes every 3-10%
Click to expand...
Click to collapse
Yes I have noticed that too!!
We should try and fix it!!
That would be great!!
Goππa ®o©k & ®o//
This is a kernel issue. Charging table is not properly written.
Sent from my GT540 using Tapatalk
pebe94 said:
This is a kernel issue. Charging table is not properly written.
Sent from my GT540 using Tapatalk
Click to expand...
Click to collapse
so is it like impossible to fix??
androidboss7 said:
so is it like impossible to fix??
Click to expand...
Click to collapse
Possibly not (as in it won't be impossible to fix)

Battery

Hey fellas.
I just want to know which is the best settings for governer and i/o scheduler so that i get more battery life.
Im using Ussr v5 and i' ve set max frequency 624MHz and min 312MHz.
use gov:conservative i/o sched:deadline
this wud save ur batteryy..
Droidwall is a much better app than juice defender, it saves a lot more juice than juice defender does and that too without any RAM and battery consumption.
Best Power Saving Governors
Best for Screen ON: Ondemand
Best Screen ON + performance: SmartassV2
- Good choice if you need a performance governor with some power saving
What about when my Screen is OFF?
Best Governor for Screen OFF
Without Deep Idle: Same as Screen ON > Ondemand
With Deep Idle: Any governor
Click to expand...
Click to collapse
Ref : http://forum.xda-developers.com/showthread.php?t=1507204
U need root access for droid wall.. And juice defender is fine for un rooted devices.. Was talking about an unrooted phoneView attachment 1320249
Sent from my GT-S6102 using xda app-developers app
The OPs phone was rooted..btw juice defender might save some battery but it takes a lot more since it runs background all the time, monitors every system function (wifi disabling per app settings) which needs more juice than normal, it depends whether it saves battery or not, for an aggressive user who shifts to wifi, 2g very frequently, it definitely saves, but for those who use 2g/wifi rarely or not actively, it wont matter much on the battery
How to setup droidwall after downloading to save battry....ihave downloaded it but cant undestand waht to do
Sent from my GT-S5360 using xda premium
very useful
When i enebled androidwall it is giving this error message...
Exit code:11
Ipatables : no chain/target/match by that name
Ipatables : no chain/target/match by that name
Sent from my GT-S5360 using xda premium
yashuperia said:
When i enebled androidwall it is giving this error message...
Exit code:11
Ipatables : no chain/target/match by that name
Ipatables : no chain/target/match by that name
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Its because galaxy y stock kernel does not support droidwall.
Use a custom kernel which supports droidwall.
Does merruk kernel supports it?
Sent from my GT-S5360 using xda premium
yashuperia said:
Does merruk kernel supports it?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
No, it doesnt, its really outdated, use savies kernel rev 73 or kuros kernel..
yashuperia said:
Does merruk kernel supports it?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
my kernel has it.
yashuperia said:
Does merruk kernel supports it?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
yup, it supports. U can check its features.
Animus03 said:
yup, it supports. U can check its features.
Click to expand...
Click to collapse
Nope, check once again, it still needs to be fixed, no complete droid wall support
Sent from my GT-S5360 using xda premium
hitme987 said:
Nope, check once again, it still needs to be fixed, no complete droid wall support
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Hmm.. I don't use merruk kernel, so m not sure. I just checked its features which says "NETFILTER Compatibility with DROIDWAL." so thought it supports.
Though it also have a to do list listing "DROIDWALL App Fully Working"
Animus03 said:
Hmm.. I don't use merruk kernel, so m not sure. I just checked its features which says "NETFILTER Compatibility with DROIDWAL." so thought it supports.
Though it also have a to do list listing "DROIDWALL App Fully Working"
Click to expand...
Click to collapse
Yeah, thats what I meant, it need to be fixed
btween guys wats d best governor n i/o for performance n battery saving
Sent from my GT-S5360 using xda premium
harigavara said:
btween guys wats d best governor n i/o for performance n battery saving
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Smartassv2 and vr
from my experience governor give very small impact on battery live. if your phone mostly in sleep, like mine, i find best governor is performance. performance does not save power but it's maximize suspend (aka deep sleep). faster cpu working, faster it's job done, faster it's go to sleep. for moderate usage like browsing, any governor that design to work with android phone will work. the different is not too much. for heavy work, none governor can save your power.
for i/o scheduler, it does not have any impact to your battery.

best cpu settings for jellyblastv3

Sent from my GT-S5360 using Tapatalk 2
i have installed jellyblast v3 in my phone i need to know which is best cpu govner setting i tried conservative+sio..it lags when i type in keyword n also feel the lag through headset can anyone suggest me plzz..its so laggy i cant use my phone now..
Sent from my GT-S5360 using Tapatalk 2
If u want to save batttery use conservative + sio
for performance use Performance + cfq
and for balance use activecats + sio
thanx bro..can we use battery saver with this rom to save more battery..because the battery drains within 4hrs if i use internet continuously..
Sent from my GT-S5360 using Tapatalk 2
Suresh9488 said:
thanx bro..can we use battery saver with this rom to save more battery..because the battery drains within 4hrs if i use internet continuously..
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
that's normal..
And battery saver will make your battery drain faster than before.
Continuous data exchange drains your battery faster, specially when you are using 3g.
-------#####"One small step for Muffins, One Giant Leap for Muffinkind."#####---------
oh ok..thanx bro for your rply..what is best facebook application to use other than official app..because official apps eat so much internal memory close to 35mb..plz suggest me good fbk app..
Sent from my GT-S5360 using Tapatalk 2
try FriendCaster...
but i havent tried it...
i just saw it..
WuT?
thanx..but i already try it.it also consume same internalmemory as official facebook apps consumes..
Sent from my GT-S5360 using Tapatalk 2

franko kernel with good performance and battery?

Hi wondering if anyone could share their setting with franko kernel that gives decent battery life and performance combine? or any tweaks with the kernel setting to improve over all? Thanks. The kernel is great btw
The values which comes with the Kernel should be good.
I think Franco himself uses these values.
Stock values are fine, but I find these allow better battery life without sacrificing performance:
384 MHz min freq
Conservative governor
100 mV UV across the board (optional)
Stock everything else
Sent by carrier pigeon
We don't have a franko kernel.
Sent from my Nexus 4 using Tapatalk 2
scream4cheese said:
We don't have a franko kernel.
sorry lol, i meant franco kernel.
Thanks guys
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
-50v default settings so far so good
Sent from my Nexus 4 using xda premium
persheshhater said:
-50v default settings so far so good
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Undervolting doesn't affect battery at least not a lot. Just a little bit.
scream4cheese said:
Undervolting doesn't affect battery at least not a lot. Just a little bit.
Click to expand...
Click to collapse
define a little bit
Sent from my Nexus 4 using xda premium
persheshhater said:
-50v default settings so far so good
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Whats that battery percentage widget called?
And also the Time/Date in middle? Loving it
filthykid said:
Whats that battery percentage widget called?
And also the Time/Date in middle? Loving it
Click to expand...
Click to collapse
it comes with the rootbox rom you have those options in settings - rom control - then select center clock and pick speedometer battery style
Sent from my Nexus 4 using xda premium

[Q] Effective CPU Settings for Battery Saving

Hello guys,
I just want to ask some cpu settings that will increase battery life,
Im contented in my tweaks , customizations but my problem only is the battery llife,,
hope you guys can help me
Thank you very much
Use battery saver pro. Adjust the battery saver meter acc. to ur wish, but remember that battery saving is directly proportional to lagging.
The higher the battery saver level, the more laggy the phone will be. Its ur choice...
Sent Via XDA™ Premium
bro can you suggest like governors to use, i/o
thanks
U can decraise max cpu frqancy.this is help u to battery save
Sent from my GT-I9100 using Tapatalk 2
For best battery performance-
Max. frequency-624
Min. - 156
Govener- bcm21553
I/o- deadline
Don't forget to press thanks
sent from my ANDROID using
XDA PREMIUM
Sachin Patel said:
For best battery performance-
Max. frequency-624
Min. - 156
Govener- bcm21553
I/o- deadline
Don't forget to press thanks
sent from my ANDROID using
XDA PREMIUM
Click to expand...
Click to collapse
Remember this will underclock your device. So dont try to run heavy games with these settings (they may lag). Alternately be an advanced user of Tasker, and you can save a lot of battery.
Hit thanks if you think this was informative.
Sent from my GT-S5830 using xda app-developers app
use ondemand and noop..
i already make some reseach 2 day ago on google..
this combination is the best for battery life without decreasing in perfomance..
sent via Sony W880i
Max-832
Min-312
Performance
Noop
Thank Me if I Helped U
Sent from my GT-S5360 using Xda Premium app-developers app

Categories

Resources