Database Users

New

Semi new to the forums. Usually lurked around, downloaded roms and stuff and just stayed quiet. Basically just trying to get my post count up so I can finally reply in the evo 4g dev section lol... not gonna lie about that. SO how is everyone and what do you like about the evo. Best rom/kernel combo and why?

Best rom/kernel combo and why?
Click to expand...
Click to collapse
As everyone will tell you, there is no "best rom/kernal" combo. Every single evo is different with theh way it handles roms and kernals, so you will just have to try out a few combos for yourself.

I need the 10 count also ... so here's a bump for ya
---------- Post added at 03:46 PM ---------- Previous post was at 03:39 PM ----------
One more bump.
---------- Post added at 04:15 PM ---------- Previous post was at 03:46 PM ----------
I tried CM7 first, it was smooth and easy to set up. Nothing special about the ROM. Then I tried Destroyer v.2 and it was amazing. Easy set uand p very fast. Never messed with the kernel in either. I have a nandroid of Destroyer v.2 saved for my back up (which has saved me a couple times already). Then I heard about Boot Manager which allows you to have 5 roms on the same phone!!! I had to try it. First thing I tried was loading evo-dec on the slot, and turned my phone into a brick at Publix. Panic set in. Managed to restore the Destroyer v.2 and found out evo-deck doesn't work with boot mamanger ... ... I should have read the notes. Tried Miui, loved it, for a week, and tied flashing new kernel, tiamat 4.1, did not work. SOOOOOO as I hate giving up 4g, which MIUI does NOT have and never will, I am trying Evo-Deck 1.1.3 (I think), his latest, with the stock kernel. So far, so good. SMOOTH and fast. I've done all this for space on my phone, and battery life. All of them improved me over stock. All of this in the last month. Now if I can just find a 12 step program for flashaholics, I'm good That's my story and I'm sticking to it.

[Q] Most stable JB ROM for MB526

My install of CM-10.1-20130527-NIGHTLY-MB526 isn't going so well on my MB526. Terrible battery life, BT issues and very laggy.
Anyone able to suggest the most stable JB ROM, or one that is most popular for it's stability?

try CM 10,2
ryangus said:
My install of CM-10.1-20130527-NIGHTLY-MB526 isn't going so well on my MB526. Terrible battery life, BT issues and very laggy.
Anyone able to suggest the most stable JB ROM, or one that is most popular for it's stability?
Click to expand...
Click to collapse
I tryed CM 10.2 on my defy mb525 that thinks it is mb526 (had before 10.1) and It works just Fine...My Rom is 10.2-20131020-NIGHTLY-mb526
by the great Quarx ...just install it using TWRP...easy. http://forum.xda-developers.com/showthread.php?t=2385250
---------- Post added at 02:40 PM ---------- Previous post was at 02:07 PM ----------
ryangus said:
My install of CM-10.1-20130527-NIGHTLY-MB526 isn't going so well on my MB526. Terrible battery life, BT issues and very laggy.
Anyone able to suggest the most stable JB ROM, or one that is most popular for it's stability?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2385250

georgegpzx said:
I tryed CM 10.2 on my defy mb525 that thinks it is mb526 (had before 10.1) and It works just Fine...My Rom is 10.2-20131020-NIGHTLY-mb526
by the great Quarx ...just install it using TWRP...easy. http://forum.xda-developers.com/showthread.php?t=2385250
---------- Post added at 02:40 PM ---------- Previous post was at 02:07 PM ----------
http://forum.xda-developers.com/showthread.php?t=2385250
Click to expand...
Click to collapse
Thanks - any issues with Bluetooth (particularly using a headset)?
Sent from my ME173X using Tapatalk

Haven't try yet btooth...only minor issue batt decreases by ...I think...10% at the time...and that I couldn't retrieve my apps and settings from gmail...maybe from my mistake....titanium made the dirty job...
Sent from my MB526 using xda app-developers app

I'd say Quarx's CM10 4.1.2 / CM10.2 4.3 or MokeeOS.

[Q] [N4] franco.Kernel - r210 - WiFi Issue

First off, yes I have read this in the original kernel post
8. My Wi-Fi is borked, doesn't turn on, haz gray bars, drains battary and killed my parrot. Fix plz."
A: This Kernel has stock Wi-Fi drivers, same as stock Kernel. The problem is YOU and YOU alone. Probably installed some wtf Kernel with some wtf Wi-Fi drivers. News flash, fix your derp and stop spamming this thread with nonsense. By the way, gray bars only means you're not connected to Google servers, but your Wi-Fi works just fine.
Click to expand...
Click to collapse
But this is not my actual problem, I guess.
My Nexus 4 kernel history. I only used stock or franco kernel, no other kernel whatsoever.
With Android 4.4 I got back to 100% stock, complete wipe, using the "nexus root toolkit" (Back to Stock (Flash Stock + Unroot)).
The only change to my device, rooting it, apart from that 100% stock.
With 4.4.3 I decided to try franco kernel again, it was either r201 or r209, not sure anymore.
I haven't used the fraco app for a long time. The last time I used it was when there was still a beta and a stable kernel option.
Anyway, I installed franco kernel, and my WiFi issues started, but not like mentioned by franco.
So what's the issue?
Kernel installed, phone is booting, all looks fine, WiFi is connecting, all good.
As soon as I leave the WiFi area, the problem starts. The WiFi menu doesn't show any WiFi, just searching for WiFi.
When I try to turn WiFi off, the button moves to the left, but will remain black and nothing happens.
When I close and reopen the WiFi menu, WiFi button is still on "on" and WiFi is searching.
A complete phone reboot is fixing the problem, WiFi works just fine, until I leave my WiFi area again, this is also happening with any other WiFi, at Work, at my Friends house, at Starbucks, just any WiFi.
As soon as I flash Stock Kernel back, with the "nexus root toolkit" (advance options, flash stock kernel) WiFi is working fine again, all problems solved.
Today I tried again, but now with Android 4.4.4 and r210.
I have the same issue again, exactly the same.
For now I am back to stock again, but I would like to use franco kernel.
Is there anything you can thing off, that went wrong?
What could I try to fix the issue?
Thanks for help in advance,
MiLeX

This is the exactly same issue that I had on hellscore kernel. By any chance, are you on a custon rom? Cm11 maybe?
I couldnt find any solution for that, so I stick with matr1x kernel. No problems and I am happy ever after I also think stating that this is the users problem is quite rude. I mean, what is a kernel after all if only a few people can use them? And the other question is why do others kernel work and this one not?
However, try matr1x kernel and see what happens

so you've flashed stock ROM, then Franco kernel, and then r210? And no WiFi? What was the last ROM (and android version you used)?
In the nexus root toolkit, did you have "don't wipe during flash" enabled?
Are you flashing boot.img or installing zip?
What recovery?
Edit: nvm I read more details and don't anwer the questions you answered in OP
---------- Post added at 09:32 PM ---------- Previous post was at 09:31 PM ----------
CCody said:
This is the exactly same issue that I had on hellscore kernel. By any chance, are you on a custon rom? Cm11 maybe?
I couldnt find any solution for that, so I stick with matr1x kernel. No problems and I am happy ever after I also think stating that this is the users problem is quite rude. I mean, what is a kernel after all if only a few people can use them? And the other question is why do others kernel work and this one not?
However, try matr1x kernel and see what happens
Click to expand...
Click to collapse
On CM11 it simply won't boot, and the colours would be borked.
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
I used to have the same issues with Neo kernel (oh the good old days) on my Nexus 4, but the only difference was the issue would start randomly at any circumstance. Are you undervolting or anything? Any custom WiFi manager like Chainfire's Pryfi?

RealSlimShadyMC said:
so you've flashed stock ROM, then Franco kernel, and then r210? And no WiFi? What was the last ROM (and android version you used)?
In the nexus root toolkit, did you have "don't wipe during flash" enabled?
Are you flashing boot.img or installing zip?
What recovery?
Edit: nvm I read more details and don't anwer the questions you answered in OP
---------- Post added at 09:32 PM ---------- Previous post was at 09:31 PM ----------
On CM11 it simply won't boot, and the colours would be borked.
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
I used to have the same issues with Neo kernel (oh the good old days) on my Nexus 4, but the only difference was the issue would start randomly at any circumstance. Are you undervolting or anything? Any custom WiFi manager like Chainfire's Pryfi?
Click to expand...
Click to collapse
There is a version of hellscore for cm. And it is official, since it can be downloaded from the official site.

CCody said:
There is a version of hellscore for cm. And it is official, since it can be downloaded from the official site.
Click to expand...
Click to collapse
The guy is asking about Franco kernel. He stated that Franco kernel is all he uses.

@ RealSlimShadyMC
@ CCody
I use 100% stock 4.4.4 no custom rom whatsoever.
I used to have AOKP, but that was only until 4.3. With Kitkat (4.4) I went back to 100% stock, no changes, stock everything.

RealSlimShadyMC said:
The guy is asking about Franco kernel. He stated that Franco kernel is all he uses.
Click to expand...
Click to collapse
I can read
I just wanted to mention that I have the same issue and also with a custom kernel. And since hellscore and franco kernel isnt that different, (I think they use the same compiler and codes) OPs issue isnt unique.
However, if you have any solution for that, I also would be glad to hear them. [emoji106]
---------- Post added at 10:47 PM ---------- Previous post was at 10:45 PM ----------
MiLeX84 said:
@ RealSlimShadyMC
@ CCody
I use 100% stock 4.4.4 no custom rom whatsoever.
I used to have AOKP, but that was only until 4.3. With Kitkat (4.4) I went back to 100% stock, no changes, stock everything.
Click to expand...
Click to collapse
I come to think it is caused by the android version.
Would you mind testing something out for me? Flash the following kernel: matr1x and hellscore. If hellscore didnt work, I am sure it is a kernel issue and you could do nothing about it

CCody said:
I can read
I just wanted to mention that I have the same issue and also with a custom kernel. And since hellscore and franco kernel isnt that different, (I think they use the same compiler and codes) OPs issue isnt unique.
However, if you have any solution for that, I also would be glad to hear them. [emoji106]
---------- Post added at 10:47 PM ---------- Previous post was at 10:45 PM ----------
I come to think it is caused by the android version.
Would you mind testing something out for me? Flash the following kernel: matr1x and hellscore. If hellscore didnt work, I am sure it is a kernel issue and you could do nothing about it
Click to expand...
Click to collapse
Can you:
backup everything with NANDroid, then flash a custom ROM (any, as long as it's AOSP)
then franco kernel
shet. Quoted wrong guy.

I come to think it is caused by the android version.
Would you mind testing something out for me? Flash the following kernel: matr1x and hellscore. If hellscore didnt work, I am sure it is a kernel issue and you could do nothing about it
Click to expand...
Click to collapse
I just installed the Hellscore Kernal Manager, its only offering two a 4.4.3 Kernels. b47-kk 4.4.3 and b47-CM.4.4.3.
As the Kernel is not for 4.4.4 I would expect issues. Well I do know there is barely a difference from 4.4.3 to 4.4.4. but anyway.

MiLeX84 said:
[/COLOR]
I come to think it is caused by the android version.
Would you mind testing something out for me? Flash the following kernel: matr1x and hellscore. If hellscore didnt work, I am sure it is a kernel issue and you could do nothing about it
Click to expand...
Click to collapse
I just installed the Hellscore Kernal Manager, its only offering two a 4.4.3 Kernels. b47-kk 4.4.3 and b47-CM.4.4.3.
As the Kernel is not for 4.4.4 I would expect issues. Well I do know there is barely a difference from 4.4.3 to 4.4.4. but anyway.
Click to expand...
Click to collapse
nope, no issues. Ignore. there was no new kernel source with 4.4.4 so they're the same kernel wise

[Q] Is the 3.0 Kernel suitable for daily use?

Hello, fellow defy owners,
I've got an MB526 with CM11 and the 2.6 kernel, OC'ed to stable 1.3Ghz.
I rely on my phone for phone calls, permanent data connection, as well as online/offline GPS navigation. I can live without video recording.
Can I use the 3.0 Kernel as a daily driver? I read somewhere that magnetometer is not working (a few months ago), isnt that used for GPS?
Also, I read that OC is not implemented in the latest kernel, but 1.1Ghz can be enabled. Would 1.1Ghz w/ 3.0 be faster than 1.3Ghz w/2.6?
Yeah, I know I should get a new phone, but with all the features/tweaks I have on my defy , it would be a downgrade more than an upgrade, honestly, so I'll probably keep it for 1 or 2 more years.
Should I upgrade to the 3.0 Kernel? Any feedback is appreciated!

defynoob said:
Should I upgrade to the 3.0 Kernel? Any feedback is appreciated!
Click to expand...
Click to collapse
i think the kernel 3.0 still raw and is not suitable for daily use. my recently experiments were versions 201409XX or earlier.
---------- Post added at 02:03 PM ---------- Previous post was at 01:57 PM ----------
yet. kernel 3.0 is still on the old version of partitions. and it makes it not interesting at this stage.

[Q&A] [Kernel + MOD] Hells Doctor #3 R6 / T.A.R.D.I.S. MOD 4.09.18

Q&A for [Kernel + MOD] Hells Doctor #3 R6 / T.A.R.D.I.S. MOD 4.09.18
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Bootloop on DirtyUnicorn
Hi , nice work. I've been using HellsDoctor and the battery life is just amazing... but, when I try to flash TARDIS I got bootloop.
Running DirtyUnicorns[Du_mako_4.4.4_20140823.v.7.9-OFFICIAL] and 3.4.104-hells-Doctor-R6.
I am sure I've followed the steps and also I tried some combinations by myself but still isn't working.
Thx in advance.

Which kernel version
I'm using "fiui ROM" -http://forum.xda-developers.com/nexus-4/development/rom-fiui-nexus-01-10-2014-t2892753
Please suggest what version of your kernel will run on it. I tried the latest versions and i'm getting bootloops.

aksh_ad14 said:
I'm using "fiui ROM" -http://forum.xda-developers.com/nexus-4/development/rom-fiui-nexus-01-10-2014-t2892753
Please suggest what version of your kernel will run on it. I tried the latest versions and i'm getting bootloops.
Click to expand...
Click to collapse
CM version

Hello, and thanks for this awesome kernel!
I was trying to flash Dirty Unicorns and Hell's Doctor today, but all kinds of strange behavior ensued. (namely: I lost my display, while ADB could see the device normally).
I flashed the CM version, so am I correct to believe that I should flash the AOSP one?

sgiannouris said:
Hello, and thanks for this awesome kernel!
I was trying to flash Dirty Unicorns and Hell's Doctor today, but all kinds of strange behavior ensued. (namely: I lost my display, while ADB could see the device normally).
I flashed the CM version, so am I correct to believe that I should flash the AOSP one?
Click to expand...
Click to collapse
I will answer my own question here, based on the search in DU's thread:
We need:
- AOSP kernel version
- Revert_4.4.3_Wifi_Fix.zip from http://bit.ly/makostuff (thanks @gorilla p )
and If you want to flash TARDIS, chose CAF dalvik libs.
Tested with HD3_R6 on DU 8.1 & 8.2 and all is well.

Hello,I just wanna ask is this kernel working on aosp lollipop? Which version should I use?

I would also recommend checking out Unleashed kernel along with the latest UKM 3.5 for Synapse.

What does this mean. Every time I open synapse it pops up.LRX21M with hells Dr3-R6.
Sent from my Nexus 4 using XDA Free mobile app

I have clean flashed Lollipop on my N4. Can I simply download the kernel, tardis, and UKM and flash them as per usual, like on KitKat?
I've read through the original thread and it appears some people are talking about a "permissive" boot image? What for? Do I need it or not?
How do I flash this on a clean Lollipop install? It's not clear.
Thanks for the help

I'm having problems with the battery like someone reported before.
The Wi-Fi seems to appear active even if I shutdown.
Some search boxes when are suggesting options the image appears strange.
As I am a new user I can't post images.

Can you include volume rocker wake phone, please?

@AnaguaMateus The volume rocker is included in the N5X-ROM
I'm using this ROM and it has very cool features, I recommand it A new build is going to be release in few hours
Also a FULL WIPE is recommended if you have those bugs
---------- Post added at 10:12 PM ---------- Previous post was at 10:07 PM ----------
ansontyl96 said:
Hello,I just wanna ask is this kernel working on aosp lollipop? Which version should I use?
Click to expand...
Click to collapse
YES it is working on AOSP Lollipop Also you should use the latest L version (L11 for the moment) in combination with the TARDIS-L-Aroma
---------- Post added at 10:20 PM ---------- Previous post was at 10:12 PM ----------
WelfareBaby said:
What does this mean. Every time I open synapse it pops up.LRX21M with hells Dr3-R6.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
It means that your N4 didn't shut down properly last time so Synapse isn't applying the parameters you've set in the last session/boot
---------- Post added at 10:30 PM ---------- Previous post was at 10:20 PM ----------
SeanInToronto said:
I have clean flashed Lollipop on my N4. Can I simply download the kernel, tardis, and UKM and flash them as per usual, like on KitKat?
I've read through the original thread and it appears some people are talking about a "permissive" boot image? What for? Do I need it or not?
How do I flash this on a clean Lollipop install? It's not clear.
Thanks for the help
Click to expand...
Click to collapse
I think the easiest way for you is to install HellsCore Kernel Manager intead of Synapse, the most important parameters are configurables and you don't need to deal with those permissive boot images, UKM, and flash things ;P

Unable to download
Hi,
The download link it now working for me. Can you give me an alternate link?

undo tardis mods
How do i undo tardis mods?

Hello, will it support PA rom for sensation? (KK 4.4)
Sent from my Sensation using xda premium

Cm version
Hi barome, congratulations on this awesome kernel.
Are there plans for releasing L kernel CM based, so we can use it with liquidsmooth?
Thanks

Cpu min set to 1.5ghz
I have a problem with the latest L12 kernel. When using tricksterMOD or any other kernel tweaker app, the minimum cpu frequency is set to 1.5ghz. And I can't seem to make it lower because it jumps back to 1.5ghz immediately. What shall I do?

Stuck on logo of Hells Doctor
I flashed the kernal ad TARDIS mod on my nexus 4. but now I am stuck on logo screen of HD by Barome. Help me

Boot into recovery (hold power for 10 seconds to reboot, then volume down to go into fastboot mode) and then flash your ROM again.
Reboot to see if it boots ok, then flash HD, without TARDIS. If this boots successfully, flash TARDIS, with extra care to choose the correct dalvik (if applicable)