Related
Semi new to the forums. Usually lurked around, downloaded roms and stuff and just stayed quiet. Basically just trying to get my post count up so I can finally reply in the evo 4g dev section lol... not gonna lie about that. SO how is everyone and what do you like about the evo. Best rom/kernel combo and why?
Best rom/kernel combo and why?
Click to expand...
Click to collapse
As everyone will tell you, there is no "best rom/kernal" combo. Every single evo is different with theh way it handles roms and kernals, so you will just have to try out a few combos for yourself.
I need the 10 count also ... so here's a bump for ya
---------- Post added at 03:46 PM ---------- Previous post was at 03:39 PM ----------
One more bump.
---------- Post added at 04:15 PM ---------- Previous post was at 03:46 PM ----------
I tried CM7 first, it was smooth and easy to set up. Nothing special about the ROM. Then I tried Destroyer v.2 and it was amazing. Easy set uand p very fast. Never messed with the kernel in either. I have a nandroid of Destroyer v.2 saved for my back up (which has saved me a couple times already). Then I heard about Boot Manager which allows you to have 5 roms on the same phone!!! I had to try it. First thing I tried was loading evo-dec on the slot, and turned my phone into a brick at Publix. Panic set in. Managed to restore the Destroyer v.2 and found out evo-deck doesn't work with boot mamanger ... ... I should have read the notes. Tried Miui, loved it, for a week, and tied flashing new kernel, tiamat 4.1, did not work. SOOOOOO as I hate giving up 4g, which MIUI does NOT have and never will, I am trying Evo-Deck 1.1.3 (I think), his latest, with the stock kernel. So far, so good. SMOOTH and fast. I've done all this for space on my phone, and battery life. All of them improved me over stock. All of this in the last month. Now if I can just find a 12 step program for flashaholics, I'm good That's my story and I'm sticking to it.
Hey folks !
I recently flashed a 4.4 port of the N5 but missed my Pie control so I reverted back to my previous ROM (Xylon 4.2.2) I didn't do any backup with CWM so I had to fully reflash all my stuff. Things I've done successfully. But I noticed that the latest Xylon 4.2.2 handle the color thing very badly. (too dark). Is there anything I can do to get thing better here ? kernel or something that have a good color profil ? I love the N4 because of the natural color it provides but here it's like I'm back on Samsung Galaxy Nexus and I kind of dislike.
Any help will be highly appreciated guys.
Thanks a lot
Pooley
Sent from my toilets.
Hi, you need to flash another kernel with a different color profile, I'm not sure which one you can try (as I'm using KitKat right now and I got the phone a few months ago) but I'm certain that is kernel related.
I remember using PA and the colors were darky too, and those color settings were on the kernel.
pooley:) said:
Hey folks !
I recently flashed a 4.4 port of the N5 but missed my Pie control so I reverted back to my previous ROM (Xylon 4.2.2) I didn't do any backup with CWM so I had to fully reflash all my stuff. Things I've done successfully. But I noticed that the latest Xylon 4.2.2 handle the color thing very badly. (too dark). Is there anything I can do to get thing better here ? kernel or something that have a good color profil ? I love the N4 because of the natural color it provides but here it's like I'm back on Samsung Galaxy Nexus and I kind of dislike.
Any help will be highly appreciated guys.
Thanks a lot
Pooley
Sent from my toilets.
Click to expand...
Click to collapse
hi, so you are searching for a 4.2.2 kernel?
hmm, thats kind of hard, because most devs updated their kernel sources about 2 month ago onto a higher lvl.
here is a link to faux's kernels for 4.2.2
faux.androidro.ms/mako/jb42/
if it suits your needs, you can edit the color profiles with tricksterMOD (from the playstore) like these:
docs.google.com/spreadsheet/ccc?key=0AoDp2qRui0u0dGE4T2gtSDBTRHVFSldPS2RrX1Rya0E#gid=6
.. or take one of the build in color profils, if you purchased faux kernel enhancement pro
also there can be other old kernels found, e.g. by franco or DerKernel (in fact, last one does not support color profiles :/ )
---------- Post added at 02:25 PM ---------- Previous post was at 02:17 PM ----------
found a pa kernel on goo.im, but compiled in february :/
goo.im/devs/paranoidandroid/roms/mako/pa_mako-Kernel422_CalibratedHoloBlue.zip
...
Thanks guys.
Yep I know it's tricky to find, i'd like to be on 4.4 for better luck but there is no 4.4 based ROM with Pie control yet.
I will backup my ROM with cwm and try to flash some in your post and keep you posted. (Goo.im link is down due to the moving on server they're doing there)
Thanks a lot bro I'll try the faux kernel.
Sent from my toilets
EDIT : Faux did the trick thanks for the link !
First off, yes I have read this in the original kernel post
8. My Wi-Fi is borked, doesn't turn on, haz gray bars, drains battary and killed my parrot. Fix plz."
A: This Kernel has stock Wi-Fi drivers, same as stock Kernel. The problem is YOU and YOU alone. Probably installed some wtf Kernel with some wtf Wi-Fi drivers. News flash, fix your derp and stop spamming this thread with nonsense. By the way, gray bars only means you're not connected to Google servers, but your Wi-Fi works just fine.
Click to expand...
Click to collapse
But this is not my actual problem, I guess.
My Nexus 4 kernel history. I only used stock or franco kernel, no other kernel whatsoever.
With Android 4.4 I got back to 100% stock, complete wipe, using the "nexus root toolkit" (Back to Stock (Flash Stock + Unroot)).
The only change to my device, rooting it, apart from that 100% stock.
With 4.4.3 I decided to try franco kernel again, it was either r201 or r209, not sure anymore.
I haven't used the fraco app for a long time. The last time I used it was when there was still a beta and a stable kernel option.
Anyway, I installed franco kernel, and my WiFi issues started, but not like mentioned by franco.
So what's the issue?
Kernel installed, phone is booting, all looks fine, WiFi is connecting, all good.
As soon as I leave the WiFi area, the problem starts. The WiFi menu doesn't show any WiFi, just searching for WiFi.
When I try to turn WiFi off, the button moves to the left, but will remain black and nothing happens.
When I close and reopen the WiFi menu, WiFi button is still on "on" and WiFi is searching.
A complete phone reboot is fixing the problem, WiFi works just fine, until I leave my WiFi area again, this is also happening with any other WiFi, at Work, at my Friends house, at Starbucks, just any WiFi.
As soon as I flash Stock Kernel back, with the "nexus root toolkit" (advance options, flash stock kernel) WiFi is working fine again, all problems solved.
Today I tried again, but now with Android 4.4.4 and r210.
I have the same issue again, exactly the same.
For now I am back to stock again, but I would like to use franco kernel.
Is there anything you can thing off, that went wrong?
What could I try to fix the issue?
Thanks for help in advance,
MiLeX
This is the exactly same issue that I had on hellscore kernel. By any chance, are you on a custon rom? Cm11 maybe?
I couldnt find any solution for that, so I stick with matr1x kernel. No problems and I am happy ever after I also think stating that this is the users problem is quite rude. I mean, what is a kernel after all if only a few people can use them? And the other question is why do others kernel work and this one not?
However, try matr1x kernel and see what happens
so you've flashed stock ROM, then Franco kernel, and then r210? And no WiFi? What was the last ROM (and android version you used)?
In the nexus root toolkit, did you have "don't wipe during flash" enabled?
Are you flashing boot.img or installing zip?
What recovery?
Edit: nvm I read more details and don't anwer the questions you answered in OP
---------- Post added at 09:32 PM ---------- Previous post was at 09:31 PM ----------
CCody said:
This is the exactly same issue that I had on hellscore kernel. By any chance, are you on a custon rom? Cm11 maybe?
I couldnt find any solution for that, so I stick with matr1x kernel. No problems and I am happy ever after I also think stating that this is the users problem is quite rude. I mean, what is a kernel after all if only a few people can use them? And the other question is why do others kernel work and this one not?
However, try matr1x kernel and see what happens
Click to expand...
Click to collapse
On CM11 it simply won't boot, and the colours would be borked.
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
I used to have the same issues with Neo kernel (oh the good old days) on my Nexus 4, but the only difference was the issue would start randomly at any circumstance. Are you undervolting or anything? Any custom WiFi manager like Chainfire's Pryfi?
RealSlimShadyMC said:
so you've flashed stock ROM, then Franco kernel, and then r210? And no WiFi? What was the last ROM (and android version you used)?
In the nexus root toolkit, did you have "don't wipe during flash" enabled?
Are you flashing boot.img or installing zip?
What recovery?
Edit: nvm I read more details and don't anwer the questions you answered in OP
---------- Post added at 09:32 PM ---------- Previous post was at 09:31 PM ----------
On CM11 it simply won't boot, and the colours would be borked.
---------- Post added at 09:35 PM ---------- Previous post was at 09:32 PM ----------
I used to have the same issues with Neo kernel (oh the good old days) on my Nexus 4, but the only difference was the issue would start randomly at any circumstance. Are you undervolting or anything? Any custom WiFi manager like Chainfire's Pryfi?
Click to expand...
Click to collapse
There is a version of hellscore for cm. And it is official, since it can be downloaded from the official site.
CCody said:
There is a version of hellscore for cm. And it is official, since it can be downloaded from the official site.
Click to expand...
Click to collapse
The guy is asking about Franco kernel. He stated that Franco kernel is all he uses.
@ RealSlimShadyMC
@ CCody
I use 100% stock 4.4.4 no custom rom whatsoever.
I used to have AOKP, but that was only until 4.3. With Kitkat (4.4) I went back to 100% stock, no changes, stock everything.
RealSlimShadyMC said:
The guy is asking about Franco kernel. He stated that Franco kernel is all he uses.
Click to expand...
Click to collapse
I can read
I just wanted to mention that I have the same issue and also with a custom kernel. And since hellscore and franco kernel isnt that different, (I think they use the same compiler and codes) OPs issue isnt unique.
However, if you have any solution for that, I also would be glad to hear them. [emoji106]
---------- Post added at 10:47 PM ---------- Previous post was at 10:45 PM ----------
MiLeX84 said:
@ RealSlimShadyMC
@ CCody
I use 100% stock 4.4.4 no custom rom whatsoever.
I used to have AOKP, but that was only until 4.3. With Kitkat (4.4) I went back to 100% stock, no changes, stock everything.
Click to expand...
Click to collapse
I come to think it is caused by the android version.
Would you mind testing something out for me? Flash the following kernel: matr1x and hellscore. If hellscore didnt work, I am sure it is a kernel issue and you could do nothing about it
CCody said:
I can read
I just wanted to mention that I have the same issue and also with a custom kernel. And since hellscore and franco kernel isnt that different, (I think they use the same compiler and codes) OPs issue isnt unique.
However, if you have any solution for that, I also would be glad to hear them. [emoji106]
---------- Post added at 10:47 PM ---------- Previous post was at 10:45 PM ----------
I come to think it is caused by the android version.
Would you mind testing something out for me? Flash the following kernel: matr1x and hellscore. If hellscore didnt work, I am sure it is a kernel issue and you could do nothing about it
Click to expand...
Click to collapse
Can you:
backup everything with NANDroid, then flash a custom ROM (any, as long as it's AOSP)
then franco kernel
shet. Quoted wrong guy.
I come to think it is caused by the android version.
Would you mind testing something out for me? Flash the following kernel: matr1x and hellscore. If hellscore didnt work, I am sure it is a kernel issue and you could do nothing about it
Click to expand...
Click to collapse
I just installed the Hellscore Kernal Manager, its only offering two a 4.4.3 Kernels. b47-kk 4.4.3 and b47-CM.4.4.3.
As the Kernel is not for 4.4.4 I would expect issues. Well I do know there is barely a difference from 4.4.3 to 4.4.4. but anyway.
MiLeX84 said:
[/COLOR]
I come to think it is caused by the android version.
Would you mind testing something out for me? Flash the following kernel: matr1x and hellscore. If hellscore didnt work, I am sure it is a kernel issue and you could do nothing about it
Click to expand...
Click to collapse
I just installed the Hellscore Kernal Manager, its only offering two a 4.4.3 Kernels. b47-kk 4.4.3 and b47-CM.4.4.3.
As the Kernel is not for 4.4.4 I would expect issues. Well I do know there is barely a difference from 4.4.3 to 4.4.4. but anyway.
Click to expand...
Click to collapse
nope, no issues. Ignore. there was no new kernel source with 4.4.4 so they're the same kernel wise
Comparison Of Greatest Kernels For Our Samsung Galaxy SIII(GT-i9300)
For Touchwiz Based Roms Only
Now No More Confusion
Few Things To Know Before Going Through This Post :-
1. This is based on my personal experience with my SIII.
2. ROM-> Glamour V8 prev+S5 Mini V4 Alpha+S5 Sensation V6(A Complete mix).
3. Review on complete stock(Pre loaded) settings.
4. I AM NOT AT ALL TRYING TO INSULT ANY KERNEL DEVELOPER.
Here We Go!
1. Boeffla Kernel beta 6 --- The King
The Best Kernel.
Pros:-
1. Great Stability
2. Good Battery Life.
3. Great Ram management.
4. A helpful screen which displays all information about your SIII.
5. Governers are tunable.
6. Pre-loaded Boeffla Sound Settings. No need to install the boeffla sound control app.
Coins:-
1. No Dualboot.
2. Difficulty in adjusting the touch-to-wake duration timing slider.
3. No pre-loaded LMK(Low memory killer) settings which may create confusions while changing it.
4. Governers are only tunable only if you buy the donation app.
2. ArchiKernel V1.5.2 --- The Beast
The Most Advanced And Heavily Tweaked Kernel.
Pros:-
1. Average stability.
2. Very Good Battery Life.
3. Fast.
4. Options to choose from different sound mods( boeffla and woflson).
Coins:-
1. Not so good Ram management.
2. Buggy Stweak App.
3. "Any Kernel" Method- creates problems if you flash this beast kernel upon any other kernel. To flash this beast you need to flash the ROM again but I have made a stock kernel so that you dont need to flash the whole rom again . You can get it here :- http://forum.xda-developers.com/galaxy-s3/general/kernel-t2918638
4. No pre-loaded LMK(Low memory killer) settings which may create confusions while changing it.
5. No DualBoot.
3. AGNi Kernel V5.1 --- The Beleaguer
The Fire("Agni" an Indian word) Kernel. (Now I am using this)
Pros:-
1. Best and Great stability as comparison to other kernels.
2. Great Ram management.
3. Very Good Battery Life.
4. Fast and Smooth.
5. Options to choose from different LMK(Low Memory Killer) settings --- (Recommended to set Aggressive option).
6. Boeffla Sound.
Coins:-
1. No Dualboot.
2. Not that good AGNi Control App(Personally I dont like it).
4. Arter kernel v3.1.1 --- The Hybrid
The Amazing Kernel.
Pros:-
1. Good Stability.
2. Good Battery Life.
3. Good Ram management.
4. Full of customization options.
5. Few Governers are tunable.
6. Touchwake manual mode(what i love in this kernel).
7. Dual Boot
Coins:-
1. Difficulty in adjusting the touch-to-wake duration timing slider.
2. No option to tune LMK.
Upcoming :-
Sorry. Busy with my life. Nothing for now.
Warning:- I and other kernel developers are not at all responsible if anything wrong happens with you and your SIII.
Press Thanks button if my work is really helpful for you.
Enjoy
-AP
Testing Agni Kernel V5.1 !
Review-soon
AP
FireBlazeGT said:
Testing Agni Kernel V5.1 !
Review-soon
AP
Click to expand...
Click to collapse
Any words on AGNi kernel?
Sent from my GT-I9300 using XDA Free mobile app
skim0322 said:
Any words on AGNi kernel?
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Well. Today it is going through final tests.
Tomorrow you can read my review on AGNi Kernel.
Ok as you have request:- About AGNi kernel- Its going to replace someone's position. You know... what I mean
-AP
AGNi Kernel Review Added!
Enjoy
-AP
Where is devil kernel?
The biggest disadvantage of boeffla is lack of f2fs support. It is main reason why I'm not using it, and I never will be.
The best kernel for me is arter97's kenrel (kernel, great config app and best way to multiboot), but zram is not working (terrible multitasking), so I'm using Agni pure stock (which is almost that good like arter, but sound quality is a little worse and his app doesn't allow to change mdnie functions).
PS, coins, really ?
Arter Kernel Review Added!
Enjoy
-AP
Boeffla is the nicest i guess
kjellzweers said:
Boeffla is the nicest i guess
Click to expand...
Click to collapse
sadly this thread is just talking on sammy ROM, did OP have one for cm/aosp/omni?
i wanna post suggestion for omni/cm XD!
Sent from my GT-I9300 using XDA Free mobile app
Code124Y said:
sadly this thread is just talking on sammy ROM, did OP have one for cm/aosp/omni?
i wanna post suggestion for omni/cm XD!
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah! Because I wanna stick to ported S3 Roms! For eg- ported 4.4.2 and ported 4.4.4!
Thanks for your suggestion!
I will do so but after few months!
kjellzweers said:
Boeffla is the nicest i guess
Click to expand...
Click to collapse
I wont deny the fact but you should try others too!
Specially Agni kernel!
FireBlazeGT said:
Yeah! Because I wanna stick to ported S3 Roms! For eg- ported 4.4.2 and ported 4.4.4!
Thanks for your suggestion!
I will do so but after few months!
Click to expand...
Click to collapse
take ur time, its not necessary to do so... i know it take weeks to do accurate result...
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 04:24 PM ---------- Previous post was at 04:22 PM ----------
FireBlazeGT said:
I wont deny the fact but you should try others too!
Specially Agni kernel!
Click to expand...
Click to collapse
read the OP, he did use/try on agni kernel...
Sent from my GT-I9300 using XDA Free mobile app
Code124Y said:
take ur time, its not necessary to do so... i know it take weeks to do accurate result...
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 04:24 PM ---------- Previous post was at 04:22 PM ----------
read the OP, he did use/try on agni kernel...
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for Understanding!:fingers-crossed: Another factor is now am too busy due to my studies!:crying:
I think you quoted the wrong post :silly:
IMEI Lost
thanks for this effort, i actually moved to 4.4.4 (back to n00t) but lost the imei after and cannot restore it, i'll try to flash another stock ROM and see.
While your effort in writing and testing is greatly appreciated. But reading this review is like reading a very commercialized propaganda magazine that makes the ranking no sense at all.
How can you rate Boeffla number 1 and the king if it has the most con? Not to mention "4. Governers are only tunable only if you buy the donation app." is putting it mildly. You can't even choose the amount of working core, which you can in other Kernels . I can understand to tune a governor "variable" require donation. But amount of working core is a bit too much. And the description/documentation on some of the preset Governor is confusing.
I haven't tried the ArchiKernel, so I can't comment on the "1. Average stability.". But I don't think Boeffla would deserve "1. Great Stability". I used 3 kernel so far (GoogyMax, Boeffla and Agni), and preparing to test Arter Kernel, but Boeffla kernel is the only kernel that hangs on me - on a good basis when the multi-task become too intensive for the poor 1GB S3's RAM. Sure AgniKernel has some bugs - but coding bugs, no stability issue. And it weird you have "6. Boeffla Sound." under AgniKernel but not under Boeffla itself. And I'm pretty sure Arter Kernel has it too.
I can't say for Arter yet, but having great hope for it, but one of the best thing about AgniKernel is how the developer takes it preset setting for a everyday user's perspective. Not a programmer. Sure, it kernel app is geeky, but it most likely the only kernel that works great just by installing it - off the shelf, no changes needed. The preset ZRAM, memory optimization alone makes S3's crappy 1GB RAM much more usable. This along deserve a better ranking than all other kernel. Just my two cents
---------- Post added at 02:46 PM ---------- Previous post was at 02:41 PM ----------
[email protected] said:
thanks for this effort, i actually moved to 4.4.4 (back to n00t) but lost the imei after and cannot restore it, i'll try to flash another stock ROM and see.
Click to expand...
Click to collapse
If you ODIN back your stock ROM for your specific model and still no IMEI - you're screwed if you have no back-up. Its more risky to try ported stock ROM than custom AOSP/CM based ROMs. I wish all modder would all mention this, since not everybody has the time to keep track what happens on Android all the time. If you lost IMEI and has no back-up, read my guide: http://forum.xda-developers.com/galaxy-s3/general/guide-how-to-restore-efs-i9300-t2726998
---------- Post added at 02:52 PM ---------- Previous post was at 02:46 PM ----------
Code124Y said:
sadly this thread is just talking on sammy ROM, did OP have one for cm/aosp/omni?
i wanna post suggestion for omni/cm XD!
Click to expand...
Click to collapse
Coming from used a few devices, stock/ported/custom ROMs, there isn't much different between the Kernels for stock or AOSP/CM based ROMs, as long it coming from the same developer. There maybe occasional coding bug issue, but lots it related to the ROM itself. Though I might get flammed for it, but remember - stock ROM comes from same root as AOSP too. Manufacture just change and add their own stuff. And in Samsung's case - pretty bad as we all know. Custom ROMs has their problem too, one can only hope it get fixed by it more regularly updated future version.
TNCS said:
While your effort in writing and testing is greatly appreciated. But reading this review is like reading a very commercialized propaganda magazine that makes the ranking no sense at all.
How can you rate Boeffla number 1 and the king if it has the most con? Not to mention "4. Governers are only tunable only if you buy the donation app." is putting it mildly. You can't even choose the amount of working core, which you can in other Kernels . I can understand to tune a governor "variable" require donation. But amount of working core is a bit too much. And the description/documentation on some of the preset Governor is confusing.
I haven't tried the ArchiKernel, so I can't comment on the "1. Average stability.". But I don't think Boeffla would deserve "1. Great Stability". I used 3 kernel so far (GoogyMax, Boeffla and Agni), and preparing to test Arter Kernel, but Boeffla kernel is the only kernel that hangs on me - on a good basis when the multi-task become too intensive for the poor 1GB S3's RAM. Sure AgniKernel has some bugs - but coding bugs, no stability issue. And it weird you have "6. Boeffla Sound." under AgniKernel but not under Boeffla itself. And I'm pretty sure Arter Kernel has it too.
I can't say for Arter yet, but having great hope for it, but one of the best thing about AgniKernel is how the developer takes it preset setting for a everyday user's perspective. Not a programmer. Sure, it kernel app is geeky, but it most likely the only kernel that works great just by installing it - off the shelf, no changes needed. The preset ZRAM, memory optimization alone makes S3's crappy 1GB RAM much more usable. This along deserve a better ranking than all other kernel. Just my two cents
---------- Post added at 02:46 PM ---------- Previous post was at 02:41 PM ----------
If you ODIN back your stock ROM for your specific model and still no IMEI - you're screwed if you have no back-up. Its more risky to try ported stock ROM than custom AOSP/CM based ROMs. I wish all modder would all mention this, since not everybody has the time to keep track what happens on Android all the time. If you lost IMEI and has no back-up, read my guide: http://forum.xda-developers.com/galaxy-s3/general/guide-how-to-restore-efs-i9300-t2726998
---------- Post added at 02:52 PM ---------- Previous post was at 02:46 PM ----------
Coming from used a few devices, stock/ported/custom ROMs, there isn't much different between the Kernels for stock or AOSP/CM based ROMs, as long it coming from the same developer. There maybe occasional coding bug issue, but lots it related to the ROM itself. Though I might get flammed for it, but remember - stock ROM comes from same root as AOSP too. Manufacture just change and add their own stuff. And in Samsung's case - pretty bad as we all know. Custom ROMs has their problem too, one can only hope it get fixed by it more regularly updated future version.
Click to expand...
Click to collapse
true... i now using temasek cm10.2, funny isn't it? its may because of better ram management for me.. need further test.. else... cm11 is my last choice... because cm11 is slightly more advance in opening apps n lower lag respon(delay on opening)
Sent from my GT-I9300 using Tapatalk
Nope, perfectly understandable. The more I try, the more I feel KitKat is just a gap stopping measure for Google. It was quickly abandoned after LP.
4.1 was pretty balanced overall
4.3 probably the most feature packed since 4.x ICS, downside - the more resource hungry one goes to JB.
4.4 this is when Google realize it getting out of hand with the lack of optimization. Its is the quickest response of 4.0 branch and RAM usage is like 4.1 but for me, the battery drain seems worse than 4.3 in actual usage (screen-on activity), than again it could be the Kernel. But for two difference devices and ROM/kernel combo... I don't think so.
I'm on KK now purely because of security. Despite I had Xprivacy, my phone was giving problems (think some malware) and I had to do a clean install after about a year. And I don't install any app or play games after I set everything up. Phone ins't a gadget or gaming device for me, it for work, e-mail and internet - that it. If it wasn't for that I'm more than happy to stay on 4.3.
Hello today I will present you my ported (from here) custom kernel for our jactivelte (s4 active)
this release is for nougat roms only!
Advantages:
- OC up to 2.3 GHz!
- NTFS and EXFAT drivers built-up in kernel
kernel version: 3.4.113-DANiO
source code here
---
Credits:
- side @ xda
For which roms usable?
Sent from my GT-I9295 using XDA Labs
Saalschlacht said:
For which roms usable?
Sent from my GT-I9295 using XDA Labs
Click to expand...
Click to collapse
I updated kernel which old version based on @tsvetkov_vlad kernel source, now using ported sidecore kernel from @side
Experimental Update:
- Added GPU OC to 600 MHz
The overclock is bad for our device?
---------- Post added at 05:17 AM ---------- Previous post was at 05:15 AM ----------
I want to try it but ... How much is the difference in energy consumption with the maximum frequencies in cpu and gpu?
Is it harmful to use them?
Try installing the zip for the gpu but after flashing it the phone stayed in the Samsung logo. Not even start Lineageos14.1.
Although the zip for the overclock to the processor if it works.
Why does that happen with the gpu?
galaxyord said:
Try installing the zip for the gpu but after flashing it the phone stayed in the Samsung logo. Not even start Lineageos14.1.
Although the zip for the overclock to the processor if it works.
Why does that happen with the gpu?
Click to expand...
Click to collapse
it's buggy for gpu oc as is named "experimental".... use kernel without gpu oc
U-update?
when @side update kernel source then i update the port
cant boot on the last RR 5.8.4 from the 11th of August (7.1.2):
https://forum.xda-developers.com/galaxy-s4-active/development/7-1-1-rr-5-8-0-t3541969
I tried both versions w/ gpu overclock and w/o
1race said:
cant boot on the last RR 5.8.4 from the 11th of August (7.1.2):
https://forum.xda-developers.com/galaxy-s4-active/development/7-1-1-rr-5-8-0-t3541969
I tried both versions w/ gpu overclock and w/o
Click to expand...
Click to collapse
what shows?