Related
Hi everyone,
My phone survived falling off the roof of my car and being run over by another car - the leather slip case kept it intact. Initially I thought I'd got away with it, but its picked up a screen defect which has got progressively worse. Essentially the colours go screwy - a green tint with blue bands which move across the screen. Its definitely a loose wire as I've been able to "fix" the fault by tapping the back of the phone.
Until tonight, where its not going back to normal no matter where I tap or how hard. I'm not afraid of disassembly if its fixable - found a video online where they pull it literally to bits. But if I go buy the torx driver is the ribbon cable into the screen reasonably easy to get to? Anyone done it?
Still got 4 months left on my contract, so will be a little sad if I have to resurrect my Hermes.....
The blue thing usually happens with my phone. Got my screen replaced like a week ago and the problem persists. What I do is 'flex' the screen in the top left and bottom right and that usually works. Try like bending the screen (sort of) and it will probably work.
Skellyyy said:
The blue thing usually happens with my phone. Got my screen replaced like a week ago and the problem persists. What I do is 'flex' the screen in the top left and bottom right and that usually works. Try like bending the screen (sort of) and it will probably work.
Click to expand...
Click to collapse
Success!!!!! Sir, you are a genius, thankyou!
auximinies said:
Success!!!!! Sir, you are a genius, thankyou!
Click to expand...
Click to collapse
No problem, any day. Don't even ask how I figured out that that's the way it can be fixed haha.
Sent from my HTC HD2 using XDA App
My god how did your phone survive that
Sent from my HTC HD2 using XDA App
My touchscreen becomes unresponsive after holding down the power button to get to the Phone Options where the Silent mode, Airplane mode, Choose Profile, Screenshot, Reboot , and Power Off options are located. The touch screen becomes unresponsive, I have to power off the screen for a few seconds and turn it back on and the touch screen will work again. It just started doing this 2 weeks ago. I have tried different roms and no difference. I have performed task 29 no difference, even after fresh installation of roms with no other apps installed
Im suspecting a worn digitizer but not sure because it only does it after phone opentions menu is opened, other than that the touchscreen works fine. Than again not sure if its a rom issue because it does it with different roms even older ones i never had problems before. I just know how to flash roms and basic stuff and not that far advanced
By the way I have the latest MGLDR, and recovery, have performed task 29 and even tried it with the SD card out and same result
Any help would be greatly appriciated especially if you have had this exact problem please i want to hear from you
Thank you
Broken flat cable from digitizer to mainboard.I had the same problem.
Was it expensive to fix? Or did you fix it yourself? Did you replace the cable, digitizer or just the cable? And thanks for the help
Sent from my HD2 using xda premium
mvinceti said:
Broken flat cable from digitizer to mainboard.I had the same problem.
Click to expand...
Click to collapse
I think you mean broken flex cable from digitizer to lcd...
e334 said:
I think you mean broken flex cable from digitizer to lcd...
Click to expand...
Click to collapse
Sure he meant this, in order to make sense!
Solution: another touchscreen/digitizer or even better(but more expensive) new combo(lcd+touchscreen/digitizer)!
I have noticed that after it boots it will let me select an option from the the phone option menu but only when it is fresh of a boot, once the phone settles after a minute or two it's when the problem starts
For the meantime I'm using Quick Boot app from the market since that is the only thing it affects. I will check for prices to replace digitizer. I have seen the digitizers alone on Ebay going got around 10 bucks but I'm scared of the installation lol. I'm going to check the phone repair shop and check how they charge. If it's too much I'll just live with it since the Quick Boot app is working fine.
Thanks for the help guys, I really appreciate it and hopefully it can help somebody else with the exact problem
Sent from my HD2 using xda premium
Well took it to a local repair shop and guy told me the wires looked good and said maybe the motherboard was going out, well if it is guess I'll use my wife's Samsung Vibrant which I must say has never had any problems with, until its time for a contract renewal for me
Sent from my HD2 using xda premium
mexicandroid said:
My touchscreen becomes unresponsive after holding down the power button to get to the Phone Options where the Silent mode, Airplane mode, Choose Profile, Screenshot, Reboot , and Power Off options are located. The touch screen becomes unresponsive, I have to power off the screen for a few seconds and turn it back on and the touch screen will work again. It just started doing this 2 weeks ago. I have tried different roms and no difference. I have performed task 29 no difference, even after fresh installation of roms with no other apps installed
Im suspecting a worn digitizer but not sure because it only does it after phone opentions menu is opened, other than that the touchscreen works fine. Than again not sure if its a rom issue because it does it with different roms even older ones i never had problems before. I just know how to flash roms and basic stuff and not that far advanced
By the way I have the latest MGLDR, and recovery, have performed task 29 and even tried it with the SD card out and same result
Any help would be greatly appriciated especially if you have had this exact problem please i want to hear from you
Thank you
Click to expand...
Click to collapse
Me too
bib*oops said:
Sure he meant this, in order to make sense!
Solution: another touchscreen/digitizer or even better(but more expensive) new combo(lcd+touchscreen/digitizer)!
Click to expand...
Click to collapse
that's what I'm getting
mexicandroid said:
Well took it to a local repair shop and guy told me the wires looked good and said maybe the motherboard was going out, well if it is guess I'll use my wife's Samsung Vibrant which I must say has never had any problems with, until its time for a contract renewal for me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
I highly doubt the board is bad. I already took mine apart, a collection of dust and dirt causes the end button to mess up the contacts. Your board is probably fine if you aren't experiencing overheating or any other symptoms, no offence, he probably just wanted more work to do so they could charge you more. I've done some computer repairs for family and friends and it's ridiculous the bull that repair stores throw at you
Sent from my GT-I9100 using Tapatalk
elesbb said:
Me too
that's what I'm getting
I highly doubt the board is bad. I already took mine apart, a collection of dust and dirt causes the end button to mess up the contacts. Your board is probably fine if you aren't experiencing overheating or any other symptoms, no offence, he probably just wanted more work to do so they could charge you more. I've done some computer repairs for family and friends and it's ridiculous the bull that repair stores throw at you
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I'm not experiencing overheating issues, the guy didn't charge and said he didn't have another motherboard to swap out with and test. He didn't charge me anything at least. I know its ridiculous how much they charge sometimes but its out of warranty so I don't have much choice and I'm scared to take it apart and damage something else but I have no other choice now lol. Did you look at a video before you took your apart?
Also was your phone doing the exact same thing? It does make sense it could be a dirty contact, I work ata Chevy dealer and bad contacts sometimes do weird things but sometimes at the lock screen the touch screen won't work also and I have to turn of t the screen for it to work
Sent from my HD2 using xda premium
mexicandroid said:
I'm not experiencing overheating issues, the guy didn't charge and said he didn't have another motherboard to swap out with and test. He didn't charge me anything at least. I know its ridiculous how much they charge sometimes but its out of warranty so I don't have much choice and I'm scared to take it apart and damage something else but I have no other choice now lol. Did you look at a video before you took your apart?
Also was your phone doing the exact same thing? It does make sense it could be a dirty contact, I work ata Chevy dealer and bad contacts sometimes do weird things but sometimes at the lock screen the touch screen won't work also and I have to turn of t the screen for it to work
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Yes exactly the same thing like 100 percent exactly. And yes I did the hardest part is getting the device out of the case lol the rest is quite simple.
Sent from my GT-I9100 using Tapatalk
elesbb said:
Yes exactly the same thing like 100 percent exactly. And yes I did the hardest part is getting the device out of the case lol the rest is quite simple.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
did you use a plastic tool or a small screwdriver to get the phone out of the case?
Sent from my HD2 using xda premium
mexicandroid said:
did you use a plastic tool or a small screwdriver to get the phone out of the case?
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Small screwdriver, didn't want to but I was very careful and made sure I didn't hit anything
Sent from my GT-I9100 using Tapatalk
elesbb said:
Small screwdriver, didn't want to but I was very careful and made sure I didn't hit anything
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
After I take the cover of do I have to disconnect anything? I tried finding a video about it but no luck
Sent from my HD2 using xda premium
mexicandroid said:
After I take the cover of do I have to disconnect anything? I tried finding a video about it but no luck
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
No luck??? lol look my friend i am your luck
elesbb said:
No luck??? lol look my friend i am your luck
Click to expand...
Click to collapse
Lol thanks I meant after I take the cover off, I was able to take the plastic buttons of but I didn't see much dust, I **** a little compressed air but that's all, how did you clean up the actual buttons?
Well I put it back together after blew the buttons but for a little while the touchscreen was not working at all, I rebooted a few times and it started working but same problem
Just wanted to know how you cleaned the buttons if I'm missing something. I really want to fix it because I don't to use my wife HD2, I'll never hear the end of it from her because I always tell her phone is better lol
Sent from my HD2 using xda premium
mexicandroid said:
Lol thanks I meant after I take the cover off, I was able to take the plastic buttons of but I didn't see much dust, I **** a little compressed air but that's all, how did you clean up the actual buttons?
Well I put it back together after blew the buttons but for a little while the touchscreen was not working at all, I rebooted a few times and it started working but same problem
Just wanted to know how you cleaned the buttons if I'm missing something. I really want to fix it because I don't to use my wife HD2, I'll never hear the end of it from her because I always tell her phone is better lol
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Lol. what cover are you talking about? i just followed the one video and blew compressed air through ever little nook and crany. It didnt fix it completely as im not too worried about it since my digitizer is shattered. So i'll be more worried about it once i get a new digitizer. But just follow one of the videos on youtube, they take the thing apart all the way down to individual parts.
Hey use attached apk, and remap one of your other buttons to function as the power button. I have mine set to the green button since i dont use it anyhow. That way the endkey doesnt get used so much. It works perfectly. once i get a new display im gonna rig a way to keep this from happening again.
elesbb said:
Hey use attached apk, and remap one of your other buttons to function as the power button. I have mine set to the green button since i dont use it anyhow. That way the endkey doesnt get used so much. It works perfectly. once i get a new display im gonna rig a way to keep this from happening again.
Click to expand...
Click to collapse
thanks but now my touchscreen does not work at all now. Maybe it was just the digitizer going bad in my phone. I'm using a Samsung Vibrant which in my opinion sucks, I just got it rooted, now I need install CM7, I miss my HD2 so much. I think I'm just going to order a digitizer from Ebay and try to install myself
damn the HD2 phone owners have so many rom choices compared to this vibrant
Sent from my SGH-T959 using XDA
mexicandroid said:
thanks but now my touchscreen does not work at all now. Maybe it was just the digitizer going bad in my phone. I'm using a Samsung Vibrant which in my opinion sucks, I just got it rooted, now I need install CM7, I miss my HD2 so much. I think I'm just going to order a digitizer from Ebay and try to install myself
damn the HD2 phone owners have so many rom choices compared to this vibrant
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Ha, have you tried rebooting the HD2? If i hit the end key, it stops working completely, but after a reboot it works again. So far it hasnt stopped working since i remapped the green key to be power key. And yeah i had to use my Touch Pro 2 until i finally got an HD2. I cant wait to get a job and get an SGS2 though. Thats an amazing phone.
elesbb said:
Ha, have you tried rebooting the HD2? If i hit the end key, it stops working completely, but after a reboot it works again. So far it hasnt stopped working since i remapped the green key to be power key. And yeah i had to use my Touch Pro 2 until i finally got an HD2. I cant wait to get a job and get an SGS2 though. Thats an amazing phone.
Click to expand...
Click to collapse
My wife has the sg2 but won't let me touch it. There nice but I want a phone with a quad core processor like the HTC one, that's what I'm waiting for
Sent from my SGH-T959 using XDA
I went bowling during weekend and my good old DHD just went off out of my shirt pocket and landed flat... even the silicone case didn't help, because it just wouldn't turn on anymore. When I connect it to a PC, it recognizes HTC phone and disk but orange light doesn't light up and power button does nothing. I suppose there's nothing I can do, if anyone has any ideas, you're welcome, but I think it is kaput
What would my fellow DHD'ers suggest for my next phone? Really cool new phones like Droid DNA and Nexus 4 aren't available in Europe and Czech, so I figured either One X or Galaxy Note 2. Any other suggestions?
Cheers, I'll still be on XDA in Nexus 7 forum anyways, but I'll really miss DHD and JellyTime...
D.
try to hold power button while inserting the battery.
Thanks for the tip, but no go...
It's sounds funny but could it be possible it fell on the corner where power led and power button are located? :laugh:
If PC recognizes it, then it's not dead.
I would try to dissasembly it and shorten power button contacts to see if that's the case.
-SmOgER said:
It's sounds funny but could it be possible it fell on the corner where power led and power button are located? :laugh:
If PC recognizes it, then it's not dead.
I would try to dissasembly it and shorten power button contacts to see if that's the case.
Click to expand...
Click to collapse
Please try that, your DHD deserves it.
That old girl has a lot to give yet.
With the 4.2 ROMS out there is obvious that HTC betrayed us discontinuing support for our phones, and releasing less powered phones with ICS by default.
Maybe it's just the screen? Seriously dude, I would at least play with it just to see what's wrong...
uros0104 said:
Maybe it's just the screen? Seriously dude, I would at least play with it just to see what's wrong...
Click to expand...
Click to collapse
It is not the screen since the orange light doesn't lit up when I connect it to the charger. I suspect the motherboard cracked, but who knows. As you say, I have nothing to lose, will try opening when I have some time...
dalanik said:
It is not the screen since the orange light doesn't lit up when I connect it to the charger. I suspect the motherboard cracked, but who knows. As you say, I have nothing to lose, will try opening when I have some time...
Click to expand...
Click to collapse
I absolutely loved my Inspire 4G for the year and a half that I had her. But I moved on to a more powerful phone (S3). I still have it with Gingerbeast on it. But don't be sad about having to upgrade. Lol
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
HTC should start putting impact zones on their motherboards like what Samsung does on their devices
Sent from my Desire HD using Tapatalk 2
Sadly I don't have any tips for you, but I moved on to the note 2 and while plastic took about a week to get used to size was only a problem for the first couple of minutes. Speed wise its the first phone I haven't found the need to root of flash custom rom to speed it up (I still did it for the fun). Long story short I would highly recommend it.
Thread closed
no goodbye threads, see sticky guide.
Hey guys,
My power button seems to be pushed in...
it's not that pronounced..
Coming from an S2, the buttons seem/feel really pushed in. i can barely feel it.
I've looked at videos and high quality pictures of S4 on review sites, and they seem to be more popped out.
My power button looks/feels strangely pushed in.
Is this a defective unit?
seems like volume buttons are a bit under-pronounced..
how about you guys?
Post some images so we can compare them to our S4's
Bjray said:
Post some images so we can compare them to our S4's
Click to expand...
Click to collapse
Sent from my GT-I9100 using xda app-developers app
EDIT: it just feels really pushed in.. like when I press it, i don't feel it going in a lot. Maybe this is how they designed it?
The "click" sound is lower in volume and not as "Crisp" in feeling. (relative to my S2)
Your power button does look a little more recessed than mine...
Bjray said:
Your power button does look a little more recessed than mine...
Click to expand...
Click to collapse
thanks for that information!
hmm what do you think I can do about it?
exchange for a new one?
would i be able to do that in the corporate store even though I got it off of online preordering?
would they accept this as a reason for exchange?
I have 14 days =(
Thanks in advance for your help!
jhong91 said:
Sent from my GT-I9100 using xda app-developers app
EDIT: it just feels really pushed in.. like when I press it, i don't feel it going in a lot. Maybe this is how they designed it?
The "click" sound is lower in volume and not as "Crisp" in feeling. (relative to my S2)
Click to expand...
Click to collapse
Mine button looks like that too
jem417 said:
Mine button looks like that too
Click to expand...
Click to collapse
how does it feel?
jhong91 said:
how does it feel?
Click to expand...
Click to collapse
Compared to my GS2 Skyrocket if feels a lot softer. My GS4 doesn't have the same resistance and travel distance as my Skyrocket but the SRs button was almost flush with the device so to me the GS4 button feels more pronounced.
My s3 was like that. I opened up the phone, cut and placed a tiny piece of scotch tape behind the button to make it stick out a tiny bit more. Worked good, but when I did this the phone wasnt brand new so its your call. Maybe exchange it at the store?
jem417 said:
Compared to my GS2 Skyrocket if feels a lot softer. My GS4 doesn't have the same resistance and travel distance as my Skyrocket but the SRs button was almost flush with the device so to me the GS4 button feels more pronounced.
Click to expand...
Click to collapse
hmm yea those are the words i was looking for "resistance" and travel distance..
thanks for the reply!
highaltitude said:
My s3 was like that. I opened up the phone, cut and placed a tiny piece of scotch tape behind the button to make it stick out a tiny bit more. Worked good, but when I did this the phone wasnt brand new so its your call. Maybe exchange it at the store?
Click to expand...
Click to collapse
hmm yeah i need to be 100% sure that mine is a defect before trying to exchange it.
I can exchange it for a new phone at the AT&T store right?
would this be a valid reason? I'm worried that they won't let me..
well, I would certainly try while the phone is new. Tell them your are concerned that if its pushed in this much now, that after using the phone for a year ( or however long) that your worried it will be pushed in even more. Worst can happen is they say no. At least you can compare it to another phone anyhow. I will say mine has been like that since I bought it and it has not affected the operation other than having a case over it, then you have to really push the button hard to get it to work through the case, but that was on a certain case, and doesnt seem to be as hard on my other case.
highaltitude said:
well, I would certainly try while the phone is new. Tell them your are concerned that if its pushed in this much now, that after using the phone for a year ( or however long) that your worried it will be pushed in even more. Worst can happen is they say no. At least you can compare it to another phone anyhow. I will say mine has been like that since I bought it and it has not affected the operation other than having a case over it, then you have to really push the button hard to get it to work through the case, but that was on a certain case, and doesnt seem to be as hard on my other case.
Click to expand...
Click to collapse
Okay, I will try to go exchange it!
Thanks for your help =)
You're fine, pretty sure they're all like that mine is too. Maybe they did it to have it "blend" in more so it all looks like 1 solid unit
delete
wttisme said:
My power and volume buttons are barely visible while looking from above. I don't notice anything hard to push. Seems fairly normal to me. You shouldn't have any issues returning to a corporate store but I think the release date isn't until the 27th in stores.
Click to expand...
Click to collapse
Its ok if I press it with my fingernails, but if I try to press it with my thumb, its really hard...
Plus my wifi keeps on disconnecting and reconnecting... so annoying =(
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
jhong91 said:
Its ok if I press it with my fingernails, but if I try to press it with my thumb, its really hard...
Plus my wifi keeps on disconnecting and reconnecting... so annoying =(
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
For the wifi connect and disconnect, could it be the power saving thing that was on the S3? From the dialer try *#0011#, then press the menu softkey and select wifi, then turn off the power save mode. I know this would get rid of the constant connect/reconnect on the S 3. Not sure it works on the S 4.
It happened to me too when i switched my skyrocket to the S3. The S3 power button its kinda small and hidden so maybe just need to get a long with it :thumbup:
Sent from my GT-I9300 using xda premium
hamzer11 said:
For the wifi connect and disconnect, could it be the power saving thing that was on the S3? From the dialer try *#0011#, then press the menu softkey and select wifi, then turn off the power save mode. I know this would get rid of the constant connect/reconnect on the S 3. Not sure it works on the S 4.
Click to expand...
Click to collapse
I fixed the problem!
it turns out that it was constantly trying to connect to ATT Hotspot network. I went into advanced setting and disabled that thing, and no more problems since! =)
Maesedroid said:
It happened to me too when i switched my skyrocket to the S3. The S3 power button its kinda small and hidden so maybe just need to get a long with it :thumbup:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ok i guess i'll have to deal with it
=(
After a trip to a shower my HTC One was declared dead (boot loop even after rice, humidity remover, heat, and others) I figured I would open the phone even it it meant that I could destroy it. It turns out that all you really need is patience and tools already available. Sure, I did bent the upper cover but, hey, everything else is intact.
I started by removing the volume button and started using those "guitar picks" around going down. Added some heat to unset the glue and moving slowly I started prying open the right side (when you are looking at the lcd). Than continued moving down until the left side was stuck. After that I went high on the volume button to set the whole right side open.
Now I'm using the other tool (the one that looks like a lever?) I started opening the left side. This side was a lot harder so I applied heat again. After that the glue wasn't an issue and it started to open nicely. Now I have the phone open and I'll see if I can get it working again.
Sorry for the English. I'm too excited to correct the mistakes and I'm not from an English speaking country.
Edit: added tools pictures.
The guitar picks were used to start opening the phone. The green and blue tool were used to open the left/top/bottom sides. The light blue tool was used mostly as a lever on the right side that was already open.
Edit2:
Video will be here shortly: http://forum.xda-developers.com/showpost.php?p=48832250&postcount=22
Overall experience while opening the HTC One (compared to the iPad 2/iPhone 3G/S/4S/iPod touch 5th/Motorola Atrix/Transformer Prime) I would give it a 4. The iPad being a 2 (almost impossible to open without a heat source and nearly impossible to mount a new glass without issues).
Uhuhu said:
After a trip to a shower
Click to expand...
Click to collapse
... Should I ask why?
To fix the purple tint caused by heat on the camera sensor. thats why.
chc31 said:
... Should I ask why?
Click to expand...
Click to collapse
After dropping my an old phone in the toilet (Before I went ) never again. My phone is barred from the bathroom unless its in my pocket. I guess the OP wanted to have some alone time with his phone.........................
chc31 said:
... Should I ask why?
Click to expand...
Click to collapse
TuneIn, on the upper part of the bathroom/shower (we mostly call it "box" to take a shower while listening to music.
Wow I think that this would be very usefull for other people who want open it...
Von Ropen said:
Wow I think that this would be very usefull for other people who want open it...
Click to expand...
Click to collapse
Well, it clearly isint. He just wanted everyone to know that he was able to open the phone.
Ok you did a pretty amazing job. Now let's move on.
Sent from my One using xda app-developers app
jags_the1 said:
Well, it clearly isint. He just wanted everyone to know that he was able to open the phone.
Ok you did a pretty amazing job. Now let's move on.
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
Sorry you meant he was able to break the phone
Von Ropen said:
Sorry you meant he was able to break the phone
Click to expand...
Click to collapse
Phone is back. 100% working again. After opening it up I used a hairdryer on the "on/off" switch, left it open to cool down. After an hour I left it charging and left it there. It wasn't boot looping anymore and it turned on.
Uhuhu said:
Phone is back. 100% working again. After opening it up I used a hairdryer on the "on/off" switch, left it open to cool down. After an hour I left it charging and left it there. It wasn't boot looping anymore and it turned on.
Click to expand...
Click to collapse
But it is the same phone? how did you repare the top right corner of the screen that was completely off centered?
Von Ropen said:
But it is the same phone? how did you repare the top right corner of the screen that was completely off centered?
Click to expand...
Click to collapse
Same phone. I just glued it back to position with a superglue (superbonder is the trademark I've used). Used a toothpick to smear it gently and used some phone books to keep things in place. The top aluminum part was bent but the superglue is now holding it.
About the video, I'm not sure I'm willing to open it again. It would be awesome tho..
I have read that under the speaker grills there are screws holding it together.. did you encounter these screws?
twerg said:
I have read that under the speaker grills there are screws holding it together.. did you encounter these screws?
Click to expand...
Click to collapse
Found no screws. It's stuck together in one piece by some clips on the white border only. It's also glued around the same white border.
Follow-up: The phone is still working fine but not charging anymore. I'll wait to open it again later, in about two days or so, and than I'll video the process to see if there's something wrong. Hopefully it's fixable. And I hope I can open it without issues just like the first time. If it doesn't charge I'll see if I can get a new charging port (maybe the water did some damage by rusting the contacts of the port).
It seems that the phone is playing tricks on me. It's charging today.. Go figure..
Could be the water damage. I read where people with different phones talked about the phone acting weird like it just stop charging or the screen won't come on. That would come and go without warning. Remember my father in law damaged a phone once when he was a truck driver and delivering his load in to a walk in freezer. He made many trips in and out and I guess from the extreme cold to heat made it condensate inside the phone. Where are the water damage labels on the phone beings you had it open?
Sent from my Nexus 7 using Tapatalk 4
Double post.
Water labels are intact and since htc left Brazil we don't have an authorized to fix it so I opened it and saw that there is no water indicator in red. The water damage sticker is below the flash. Look at the pictures and you'll see a white sticker below the flash and another close to the usb port on the lower side of the phone. Not sure if the second one is a water damage indicator..
I'll keep using the phone till I get some alone time to open it. Tho I'm worried that I might break the phone this time (since it's working again - for no apparent reason).
So, yeah, there's an issue with the charging. Not sure if it's the port or the phone. Tested different chargers and it won't charge while it's on nor when it's off. After a day off it charged (yesterday) but now it won't charge. This sux. I have to find out what's going on. So, yes, I'll have to open it again. I can't have a phone that will be used to drive using gps all day behaving it like that. Phones won't last 4 hours on battery alone while using gps.
Added new picture with tools used..
Sorry for the double/triple post, but it's the best way to keep everyone informed..
If I helped you in any way please consider donating something so I can buy a new phone. The HTC One is dead due to an issue with the USB connector or something else that I'm still not aware. I will use this phone as a test bed from now on to see if I can fix other stuff without breaking too so I do need a new phone. You can donate here: http://bit.ly/1a9vqqg
Thanks and enjoy the video! I hope it helps a lot of people.
A video will be uploaded here: (it's 04:37am GMT -2) and still 205 minutes left to upload. Video will be 720p and it's 1.2gb so yeah, it will take a while. But now I'm off to bed. And sorry for my english. I'm ok writing but I'm so so when speaking. I said I would edit the video but since it's just shy of 19 minutes I figured I would leave it like that.
If you guys have any idea on what to do to help me fix the charging issue I would see if I can try that now that the phone can be easily opened. :fingers-crossed: