Related
The phone definitely boots up because the lights on the buttons flash on then turn off after some time. The keyboard also lights up. You can tell the backlight turns on on the screen, but there is no picture.
Anyone have any idea about what I should do? Thinking about trying to restore to a stock Tom somehow tonight. Then I'm thinking about looking for screen replacements.
I was curious if anyone has had this issue before.
Update 07/14/11
So I got the screen and switched the old one out for the new one. This one also only has the backlight turning on, but I noticed when I put a part back on, there was a little bump in the middle of the phone. Haven't had a chance to fix it, but I noticed it's a piece hitting this rubber piece that seems to "transport" the sound for the mic from the bottom of the phone to the actual microphone module within the phone.
Removed that rubber piece, and I'll try installing it later. I was getting some blue and red visible in the middle of the phone. Anyone know what's wrong?
albanianbrotha said:
The phone definitely boots up because the lights on the buttons flash on then turn off after some time. The keyboard also lights up. You can tell the backlight turns on on the screen, but there is no picture.
Anyone have any idea about what I should do? Thinking about trying to restore to a stock Tom somehow tonight. Then I'm thinking about looking for screen replacements.
I was curious if anyone has had this issue before.
Click to expand...
Click to collapse
ebay for the parts and look around for the link for repairs. I don't exactly remember the link, but it's in one of the "spring replacement" threads. Good luck
mputtr said:
ebay for the parts and look around for the link for repairs. I don't exactly remember the link, but it's in one of the "spring replacement" threads. Good luck
Click to expand...
Click to collapse
How sure are you it's the LCD screen? Replacement screens cost more than what I bought the phone for...lol
it's mostly the physical connection to the screen.
and on your note about it costing more than what you bought the phone for... there are tons of parts on the phone that will cost more than 30bucks. not much you can do about that since you got it non fully functional.
mputtr said:
it's mostly the physical connection to the screen.
and on your note about it costing more than what you bought the phone for... there are tons of parts on the phone that will cost more than 30bucks. not much you can do about that since you got it non fully functional.
Click to expand...
Click to collapse
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?
albanianbrotha said:
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?
Click to expand...
Click to collapse
Never had to do it myself, but there is a cable connecting the two parts of the phone. That is usually where this problem originates from. It's not easy to fix though if your not familiar with fixing electronics from what i have seen.
xsteven77x said:
Never had to do it myself, but there is a cable connecting the two parts of the phone. That is usually where this problem originates from. It's not easy to fix though if your not familiar with fixing electronics from what i have seen.
Click to expand...
Click to collapse
I've taken apart my laptop completely and put it back together before. Completely as in taking the lcd off and different chips and wireless modules and stuff. I think it may be something I can handle. I'm going to take a look at it now. Restoring wont do me any good because not even the boot screen shows up.
albanianbrotha said:
Sorry to be a both, but what exactly is the physical connection? Do I find it by opening the phone up completely to the point where I replace the actual LCD?
Click to expand...
Click to collapse
It's pretty much a ribbon cable that feeds data to display and stuff. When you buy a spare screen, it usually comes with a connector
Sent from my Desire Z via XDA App
mputtr said:
It's pretty much a ribbon cable that feeds data to display and stuff. When you buy a spare screen, it usually comes with a connector
Sent from my Desire Z via XDA App
Click to expand...
Click to collapse
So I completely tore apart the phone, got to the point where if I had another LCD screen, I could have easily switched it out. But I don't, so I just put it all back together. I really hope this new LCD will fix the issue. I really hope it's not some other motherboard issue. If all else fails, it goes up on eBay for $70-$100 as is for the phone. If I fix it, I just got myself a phone that goes for $200 used for only $57.
sure. goodluck with it. if you can do it then you're all set. good luck
albanianbrotha said:
So I completely tore apart the phone, got to the point where if I had another LCD screen, I could have easily switched it out. But I don't, so I just put it all back together. I really hope this new LCD will fix the issue. I really hope it's not some other motherboard issue. If all else fails, it goes up on eBay for $70-$100 as is for the phone. If I fix it, I just got myself a phone that goes for $200 used for only $57.
Click to expand...
Click to collapse
Only $57? That would make the lcd screen $27 if u really paid $30 for the phone, but you said the screen was more than what u paid for the phone...so now im confused.
Sent from my HTC Vision using XDA Premium App
Got my fingers crossed for ya that your getting ur phone fixed over there
Sent from my HTC Vision using XDA Premium App
ptesmoke said:
Only $57? That would make the lcd screen $27 if u really paid $30 for the phone, but you said the screen was more than what u paid for the phone...so now im confused.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Sorry. After some searching on eBay, I found some sellers selling it for a few dollars less than 30, e.g. 27.
But I decided to go with a seller who sold more than 200, who claims the screen is an OEM screen, and who is top rated. He sells his for $32. Which makes my phone $62 after all is said and done.
The housing has some scratches on the top and bottom though, which decreases the value a bit, but hey, if it works I'll probably keep it as a backup. Currently have the HD2, but I got a Vibrant with original box and accessories for $100, so I think I'm going to sell the HD2.
That was kinda off topic, sorry
LCD screen should be here by the 13th.
Updated OP
someone help =|
I don't own a G2 but I still think this could be a similar issue to what we get over here on the HTC Droid Incredible. First, what makes you believe its still a screen issue if it lit but just didn't throw picture? Usually thats the symptom of having the wrong recovery version for the device hardware version. Normally for us what happens is we will get somebody who is new and rooting for the first time and they'll end up flashing the wrong recovery or freak out because they don't realize the root process takes a little while and yank the cord. End result being exactly what you've explained above. Phone starts but no screen. So we end up having them do the ruu or a second option which we call a "blind install" where you drop whatever your p file(ours is PB31IMG.zip) so whatever it is for the G2 drop that on the SD and reboot to hboot and do the update process by simply knowing how long to wait between key presses and what keys to hit without useing the screen. Its a unique process and all very magical. Haven't lost a single Inc yet because of this issue.
Anyways bud just a thought...
wildstang83 said:
I don't own a G2 but I still think this could be a similar issue to what we get over here on the HTC Droid Incredible. First, what makes you believe its still a screen issue if it lit but just didn't throw picture? Usually thats the symptom of having the wrong recovery version for the device hardware version. Normally for us what happens is we will get somebody who is new and rooting for the first time and they'll end up flashing the wrong recovery or freak out because they don't realize the root process takes a little while and yank the cord. End result being exactly what you've explained above. Phone starts but no screen. So we end up having them do the ruu or a second option which we call a "blind install" where you drop whatever your p file(ours is PB31IMG.zip) so whatever it is for the G2 drop that on the SD and reboot to hboot and do the update process by simply knowing how long to wait between key presses and what keys to hit without useing the screen. Its a unique process and all very magical. Haven't lost a single Inc yet because of this issue.
Anyways bud just a thought...
Click to expand...
Click to collapse
It doesn't seem to be a ROM issue.
Update 7/18: Sold the G2 on eBay and still made a good lump of money. I was very happy, until another G2 popped up with the same exact issue. Got it for a steal as well, and I tried the OEM screen I got from eBay, and it was still having issues, and it seems to cause the phone to overheat while charging. Definitely a defective screen and someones getting a great deal on a decent condition G2 because I already took the payment after I figured it was the screen I got.
I'm going to try to get a replacement from the guy that sold it to me on eBay, but I already left him positive feedback thinking it was the phone's fault.
Will update probably late July or early August when all of this gets sorted out.
TL;DR: bought 2nd g2 with same issue, turns out replacement screen didn't work in the 2nd g2, too late to not sell the first g2, getting another replacement screen to fix 2nd g2. First g2 was in better condition though =|
SWEEEEEEEEEEEEEEEEEEEEEEEEEEEET
Just installed the second screen that I ordered, and it works PERFECTLY. Phone is perfect nowwww yay. I can't use it right now though, previous owned put a lock pattern on the phone...
Wipe the system and the data and start over.
Sent from my HTC Vision using XDA Premium App
Gratz now a factory wipe and root with a new rom will make it run sweet.
Sent from my Desire Z via XDA App
I've been runnin the unity rom for a couple of months now( i was) with no issues at all, when yesterday morning my phone turned off itself and i haven't been able to bring it back to life. i dont know if i have the bad chip, never cared to check but i regret it now lol... any sugestions would help.... also i have tried turning on w/o sim card with a different battery, also tried to get it to bootloader but it just wont turn on at all.. thanks in advance
frankgbacoa said:
I've been runnin the unity rom for a couple of months now( i was) with no issues at all, when yesterday morning my phone turned off itself and i haven't been able to bring it back to life. i dont know if i have the bad chip, never cared to check but i regret it now lol... any sugestions would help.... also i have tried turning on w/o sim card with a different battery, also tried to get it to bootloader but it just wont turn on at all.. thanks in advance
Click to expand...
Click to collapse
Does the computer recognize it?
Sent from my HTC Glacier Sense 3.0 using xda premium
If you're talking about no power at all, it doesn't sound like a software issue. It sounds like an electrical issue.
If the screen backlight comes on when you hit the power button, then it could be software or electronic (borked chip, broken circuit board, etc)
Plugging it in, even if it's a dead phone, should still charge the battery if the electrical circuits are good. The LED will come on at orange or green and that should tell you if there is physically electricity running through the circuits.
If you get nothing, something in the phone died. I'm starting to realize the MT4G has a pretty poor build quality.
If the battery is charging and the backlight comes out, maybe a quick vibrate to indicate charging, then you could have some kind of an electrical short in the circuitry somewhere.
Or you just have a bad power button. That's a possibly. But that's odd that it turned itself off. That's what makes me think the power button itself isn't what's wrong.
In all cases it sounds dead. If you can't get to the recovery screen there's not much you can do.
saranhai said:
Does the computer recognize it?
Sent from my HTC Glacier Sense 3.0 using xda premium
Click to expand...
Click to collapse
no the computer does not recognize..thanks
Skipjacks said:
If you're talking about no power at all, it doesn't sound like a software issue. It sounds like an electrical issue.
If the screen backlight comes on when you hit the power button, then it could be software or electronic (borked chip, broken circuit board, etc)
Plugging it in, even if it's a dead phone, should still charge the battery if the electrical circuits are good. The LED will come on at orange or green and that should tell you if there is physically electricity running through the circuits.
If you get nothing, something in the phone died. I'm starting to realize the MT4G has a pretty poor build quality.
If the battery is charging and the backlight comes out, maybe a quick vibrate to indicate charging, then you could have some kind of an electrical short in the circuitry somewhere.
Or you just have a bad power button. That's a possibly. But that's odd that it turned itself off. That's what makes me think the power button itself isn't what's wrong.
In all cases it sounds dead. If you can't get to the recovery screen there's not much you can do.
Click to expand...
Click to collapse
no led lights it just died lol... it wont do a thing. im starting to think that it has some kind of short between the battery and the circuit that distributes power through out the phone.. thats my best guess.thanks
You can also check to make sure the battery isn't the problem by removing it and plugging the phone in. Again, the best you'll get is a brief flash of the backlight. But if you don't get that, you can be sure the battery itself isn't the problem.
Or just put a new battery in and see if that works.
This is highly unlikely to be the cause. But it's all about narrowing the possibilities. I've been fiddling with electronics for 20 years now. One thing I'm sure of is that you should never discount the really unlikely source of a problem. It won't usually be the answer, but every once in a while something you'd just never suspect ends up being the culprit.
I had the exact same issue, earlier this year. Your emmc chip gave you the bird. Go into Tmobile store, tell then your phone won't turn on, you tried the normal tricks, but nothing works. Act a little dumb with them,I did that an got a new one under warranty for $5, came in the mail the days later. DO NOT MENTION ANYTHING BOUT YOUR PHONE BEING ROOTED. If you do, your gonna have to pay full price for a new one or though the issuance company a $130(or whatever your deductible is).
Trust me on this, it works. I'm still using the phone they sent to me back in June.
If I helped, give thanks(via the button )
From my fist to your face, enjoy!
Mr.Highway said:
I had the exact same issue, earlier this year. Your emmc chip gave you the bird. Go into Tmobile store, tell then your phone won't turn on, you tried the normal tricks, but nothing works. Act a little dumb with them,I did that an got a new one under warranty for $5, came in the mail the days later. DO NOT MENTION ANYTHING BOUT YOUR PHONE BEING ROOTED. If you do, your gonna have to pay full price for a new one or though the issuance company a $130(or whatever your deductible is).
Trust me on this, it works. I'm still using the phone they sent to me back in June.
If I helped, give thanks(via the button )
From my fist to your face, enjoy!
Click to expand...
Click to collapse
ill try it tomorrow see if it works lol.... hopefully...thanks i was afraid of being the emmc chip.... damn it..
frankgbacoa said:
ill try it tomorrow see if it works lol.... hopefully...thanks i was afraid of being the emmc chip.... damn it..
Click to expand...
Click to collapse
It's always good to be safe then sorry
If I helped, give thanks( via the button )
From my fist to your face, enjoy!
Whelp. My power button has been flaky for a very long time and I've thankfully had it running CM so was able to do trackball wake.
This morning my trackball went green and stayed that way, well... until it went orange, red, and then absolutely crazy. Obviously, tried removing the battery and now am unable to power back on.
When it was powered on, it wasn't able to connect to the computer but did charge. At the moment it's off and is charging from the computer but the trackball is changing colour rapidly and Windows keeps finding a new device etc..
I guess this is time to get a new phone
Edit: HAHA! I did the jumpstart trick and my phone booted! The trackball has turned off now, though it did that earlier and it came back so we shall see!
Edit: Okay that didn't last, it's blinking red and no now its off again arghhh
Edit: Well, the lights haven't come on again since yesterday afternoon and it's running perfectly again. I guess I'm not going to get an upgrade now!
Did you do anything new to it recently?
I did not, but my son got his grubby mitts on it and dropped it on the ground so it's possible that did it, or perhaps he did drop it in water (Don't think he did but we may never know!)
The good news is, I have gone out and bought a Nexus S for £200 from carphone warehouse, so have a phone I can rely upon and can send my N1 in for repairs
Then I don't know... use the N1 for a web server or something?
Network_Punk said:
I did not, but my son got his grubby mitts on it and dropped it on the ground so it's possible that did it, or perhaps he did drop it in water (Don't think he did but we may never know!)
The good news is, I have gone out and bought a Nexus S for £200 from carphone warehouse, so have a phone I can rely upon and can send my N1 in for repairs
Then I don't know... use the N1 for a web server or something?
Click to expand...
Click to collapse
I use my spare n1 as a mini web server... works great actually. Uses pretty much 0 power and is perfect for hosting files you may need while put and about.
Sent from my Nexus One using XDA App
The jumpstart method takes a while for me, and doesn't really work by removing/inserting before charging LED comes back on. One (possible) method to the madness I've seen is rapidly inserting and removing the battery, till eventually, the alternate green/orange blinker is blinking regardless of whether the battery is inserted or not. Removing and reinserting quickly once this happens powers it back on.
However, even if you are out of warranty, I recommend you return to the service center. Self-replacement of the I/O board costs about the same ~$35 for the board, so you might as well pay for professional service. Will GREATLY enhance your resale value too!
I had to have out of country service (I'm based in India), and all they charged me were the 'out-of-country' charges, and even though the N1 was never sold in India, they keep the part here. Mine was fixed within 18hrs from submitting it to the official service center here. Cost me Rs. 1350 (out of country device charges in India).
I have noticed that you can adb reboot a phone while it's charging.
Try it.
Sent from my Sensation using xda premium
Phateless said:
I have noticed that you can adb reboot a phone while it's charging.
Try it.
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
Nope, doesn't work on the N1 (not mine, at least). Neither does fastboot. Believe me, if that worked, I wouldn't have bothered getting the power button replaced! It was a terrible ordeal, having no power button and a VERY unstable ICS ROM. Every time it powered off/froze, I spent 20 minutes willing it to turn on!
mrhohoha said:
Nope, doesn't work on the N1 (not mine, at least). Neither does fastboot. Believe me, if that worked, I wouldn't have bothered getting the power button replaced! It was a terrible ordeal, having no power button and a VERY unstable ICS ROM. Every time it powered off/froze, I spent 20 minutes willing it to turn on!
Click to expand...
Click to collapse
Lol that sounds terrible! Maybe it's just the newer phones like my glacier and sensation that actually charge in recovery mode.
I just know that when powered off they respond to adb. Did you try it already, just to humor me?
Sent from my Sensation using xda premium
Phateless said:
Lol that sounds terrible! Maybe it's just the newer phones like my glacier and sensation that actually charge in recovery mode.
I just know that when powered off they respond to adb. Did you try it already, just to humor me?
Sent from my Sensation using xda premium
Click to expand...
Click to collapse
I had tried a while ago, when my power button died on me. I did again, after reading your post. No go. The N1 is well and truly OFF when it's powered off! Checked adb devices and fastboot devices just to be sure. Nope, nothing. Device doesn't show up. Not even in recovery mode.
mrhohoha said:
I had tried a while ago, when my power button died on me. I did again, after reading your post. No go. The N1 is well and truly OFF when it's powered off! Checked adb devices and fastboot devices just to be sure. Nope, nothing. Device doesn't show up. Not even in recovery mode.
Click to expand...
Click to collapse
Bummer. I wonder why the newer devices charge in recovery mode?
Sent from my Sensation using xda premium
I noticed tonight that my touchscreen stops working when I slide the keyboard all the way out. It looks like when you slide it, when it gets about 1/2 way, the lights under the touch keys (home, search, etc) turn off, then 3/4 of the way out, they come back on, but you can't touch anything on the screen. No scrolling, no selecting, nothing. When you start to close it, the lights turn off 3/4 of the way open, then 1/2 the way open they turn on and the touch screen starts working again.
I've been watching videos on how to replace the digitizer and they look easy enough for me to do, but is it really the digitizer if it is working when the phone is closed? This sounds more like a loose cable, eight? Anyone else have this happen?
That does sound more like the flex cable
Michigan rockin the forums again :O
one by one the penguins steal my sanity
CodeMonk said:
I noticed tonight that my touchscreen stops working when I slide the keyboard all the way out. It looks like when you slide it, when it gets about 1/2 way, the lights under the touch keys (home, search, etc) turn off, then 3/4 of the way out, they come back on, but you can't touch anything on the screen. No scrolling, no selecting, nothing. When you start to close it, the lights turn off 3/4 of the way open, then 1/2 the way open they turn on and the touch screen starts working again.
I've been watching videos on how to replace the digitizer and they look easy enough for me to do, but is it really the digitizer if it is working when the phone is closed? This sounds more like a loose cable, eight? Anyone else have this happen?
Click to expand...
Click to collapse
Sounds like it's most likely the Flex Cable. Which is easy enough to change. They usually don't just come loose. Has been know to happen, but it's rare. You can repair it yourself, you just have to have the proper tools. If you do attempt it, be sure to take your time. You can pick the Flex Cable / Tool Kit up on Ebay, or Amazon fairly cheaply.
prboy1969 said:
Sounds like it's most likely the Flex Cable. Which is easy enough to change. They usually don't just come loose. Has been know to happen, but it's rare. You can repair it yourself, you just have to have the proper tools. If you do attempt it, be sure to take your time. You can pick the Flex Cable / Tool Kit up on Ebay, or Amazon fairly cheaply.
Click to expand...
Click to collapse
I personally wouldnt touch it... I had a bad flex cable and brought it to sprint and they bricked my phone while changing it... If sprint can brick that easily changing a flex cable, imagine your odds...
Sent from my PG06100 using Tapatalk
drob311 said:
I personally wouldnt touch it... I had a bad flex cable and brought it to sprint and they bricked my phone while changing it... If sprint can brick that easily changing a flex cable, imagine your odds...
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
That's very true. There is a chance you can damage, or even "Brick" the device if you don't know what your doing. I've changed about about five already. The first one took forever, I was so nervous. But after about the third one it was all good . Same with the digitizers, first one is like Ahhh . After about the 10th one it's not that scary. No I do not damage my phone that often. Just know a lot of people who do. That also do not have TEP Insurance.
TEAM MiK
Mik Roms Since 3/13/11
Ok, in the immortal words of Eminem, "I'm not afraid." Or wasn't, at least. I took it apart tonight and yep, the flex cable is broken. Taking it apart made it worse and I've lost my earpiece. The good news is the touch screen works while the keyboard is slid out... But it doesn't with it in. lol
I did find some on ebay, but does anyone know of a place that sells the sliding mechanism? Mine is pretty sloppy and I'd like to fix that while I have it open to replace the cable.
Your best bet is going to be a damaged Shift. I don't know of any place that sells just the parts. But I would still hunt around on the net. Maybe check Amazon, or Craigslist.
TEAM MiK
MikROMs Since 3/13/11
I mean nobody disrespect I am just as intrigued by taking things apart and just as satisfied with self repair as the next tech guy, but you don't even need to have TEP to get a shift with a broken flex cable replaced. This is a warranty issue. By no fault of yours, the phone is broken. Sprint replaces these without push back, I'm on my 3rd shift. Now that you've opened it though, you may be out of luck.
HTCotta said:
I mean nobody disrespect I am just as intrigued by taking things apart and just as satisfied with self repair as the next tech guy, but you don't even need to have TEP to get a shift with a broken flex cable replaced. This is a warranty issue. By no fault of yours, the phone is broken. Sprint replaces these without push back, I'm on my 3rd shift. Now that you've opened it though, you may be out of luck.
Click to expand...
Click to collapse
You can always tell them you took it to a third party store to get looked at.
It was out of warranty. I already tried the warranty route.
Anyway, got the cable today, put it in and the jawbone connector for the LCD is jacked up. It won't go all the way in no matter what you do. So I put the old one back in and now the touch screen is completely gone.
My wife called sprint while I was messing with it cause she wanted to see if there were any repair stores that had parts and they offered me an early upgrade. $105 bucks and I get up to a $150 discount as long as I re-up for 2 years. Since I'm pretty happy with Sprint, this is probably a win-win situation for me to do it, so I did.
Now I just have to decide... Moto Photo, Nexus 4g, or Samsung Galaxy 2. Any opinions?
*edit: I use CM7 on my shift and would like to continue to use CM7, I don't NEED CM9, but the option would be nice.
I have a shift for sale mint condition only 2 months old...
Sent from my PG06100 using Tapatalk
Sorry, I already signed up for the upgrade. I just need to go pick one up.
Wait for the Galaxy Nexus, that's what I'm doing. The development is too awesome on nexus devices for me to stay away any longer. Even if the specs are already somewhat outdated, I just want one
HTCotta said:
Wait for the Galaxy Nexus, that's what I'm doing. The development is too awesome on nexus devices for me to stay away any longer. Even if the specs are already somewhat outdated, I just want one
Click to expand...
Click to collapse
You will miss your Shift . Once the Shift has you, it will never let you go .
obe1kobe said:
I have a shift for sale mint condition only 2 months old...
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
How much? ....
obe1kobe said:
I have a shift for sale mint condition only 2 months old...
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
BOOOO! Try the marketplace on xda instead of advertising it here btw what's you next device? I'm trying to see if I should even bother staying with sprint now that LTE is on hold it seems like I might never get 4G speeds in my town.
Ok, didn't want to clutter things up and start a new thread so I'm gonna hijack this one. Hope thats ok.
I've been having troubles with my touch sceen the last few weeks and its very sporadic. So first issue it just simply stops responding all together. Like for instance i go to pull notification bar down and it stops part way down and i cant slide it up or down nor do the home back keys work. I have to hit power button to lock then hit power button and unlock then all is fine for awhile. And to be clear i dont have to power it off, just lock it. Another instance I'll be browsing the web and i go to scroll down it starts acting goofy. As if i got 2 fingers on the sceen trying too pinch to zoom when i clearly dont. Another silly thing happens where it acts like some one is remotely using my phone. For instance I unlock my phone and then it just hitting buttons. It's actually made a phone call for me before. Also happens when browsing or anything else.
I run miui build 112300 with sparks patch. I have ran this rom for a very long time so something tells me it aint the rom. I really dont remember what I've installed lately so don't know if an app would be causing this. Something tells me its a hardware issue but i was hoping to get some suggestions before flash something new or worse running the ruu to stock. Also, i dont think it would be the flex cable because it happens mostly without the keyboard out. Plus i rarely use my keyboard, although I'm using it right now.
Any suggestions would be appreciated.
Thanks in advance.
Sent from my PG06100 using XDA App
^^^ same thing happens to me. I think flashing the touchscreen firmware update would solve it but i haven't had time to try and fix it.
Shifted from my EVO
tbag1122 said:
Ok, didn't want to clutter things up and start a new thread so I'm gonna hijack this one. Hope thats ok.
I've been having troubles with my touch sceen the last few weeks and its very sporadic. So first issue it just simply stops responding all together. Like for instance i go to pull notification bar down and it stops part way down and i cant slide it up or down nor do the home back keys work. I have to hit power button to lock then hit power button and unlock then all is fine for awhile. And to be clear i dont have to power it off, just lock it. Another instance I'll be browsing the web and i go to scroll down it starts acting goofy. As if i got 2 fingers on the sceen trying too pinch to zoom when i clearly dont. Another silly thing happens where it acts like some one is remotely using my phone. For instance I unlock my phone and then it just hitting buttons. It's actually made a phone call for me before. Also happens when browsing or anything else.
I run miui build 112300 with sparks patch. I have ran this rom for a very long time so something tells me it aint the rom. I really dont remember what I've installed lately so don't know if an app would be causing this. Something tells me its a hardware issue but i was hoping to get some suggestions before flash something new or worse running the ruu to stock. Also, i dont think it would be the flex cable because it happens mostly without the keyboard out. Plus i rarely use my keyboard, although I'm using it right now. If not, time to take it to Sprint.
Any suggestions would be appreciated.
Thanks in advance.
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
The first thing you can try is the latest Radio and Touchscreen Firmware HERE. If that does not work and the screen is still acting strange I would RUU back to Stock Unrooted. See if that resolves the issue. If not it's time to take it back to Sprint.
OK, thanks for the suggestions. Just flashed the new firmware. Like I said it was very sporadic so time will tell. Hopefully this works cause it's been a long time since I rooted my phone and I'd hate to unroot it.
Sent from my PG06100 using XDA App
My touchscreen becomes unresponsive after holding down the power button to get to the Phone Options where the Silent mode, Airplane mode, Choose Profile, Screenshot, Reboot , and Power Off options are located. The touch screen becomes unresponsive, I have to power off the screen for a few seconds and turn it back on and the touch screen will work again. It just started doing this 2 weeks ago. I have tried different roms and no difference. I have performed task 29 no difference, even after fresh installation of roms with no other apps installed
Im suspecting a worn digitizer but not sure because it only does it after phone opentions menu is opened, other than that the touchscreen works fine. Than again not sure if its a rom issue because it does it with different roms even older ones i never had problems before. I just know how to flash roms and basic stuff and not that far advanced
By the way I have the latest MGLDR, and recovery, have performed task 29 and even tried it with the SD card out and same result
Any help would be greatly appriciated especially if you have had this exact problem please i want to hear from you
Thank you
Broken flat cable from digitizer to mainboard.I had the same problem.
Was it expensive to fix? Or did you fix it yourself? Did you replace the cable, digitizer or just the cable? And thanks for the help
Sent from my HD2 using xda premium
mvinceti said:
Broken flat cable from digitizer to mainboard.I had the same problem.
Click to expand...
Click to collapse
I think you mean broken flex cable from digitizer to lcd...
e334 said:
I think you mean broken flex cable from digitizer to lcd...
Click to expand...
Click to collapse
Sure he meant this, in order to make sense!
Solution: another touchscreen/digitizer or even better(but more expensive) new combo(lcd+touchscreen/digitizer)!
I have noticed that after it boots it will let me select an option from the the phone option menu but only when it is fresh of a boot, once the phone settles after a minute or two it's when the problem starts
For the meantime I'm using Quick Boot app from the market since that is the only thing it affects. I will check for prices to replace digitizer. I have seen the digitizers alone on Ebay going got around 10 bucks but I'm scared of the installation lol. I'm going to check the phone repair shop and check how they charge. If it's too much I'll just live with it since the Quick Boot app is working fine.
Thanks for the help guys, I really appreciate it and hopefully it can help somebody else with the exact problem
Sent from my HD2 using xda premium
Well took it to a local repair shop and guy told me the wires looked good and said maybe the motherboard was going out, well if it is guess I'll use my wife's Samsung Vibrant which I must say has never had any problems with, until its time for a contract renewal for me
Sent from my HD2 using xda premium
mexicandroid said:
My touchscreen becomes unresponsive after holding down the power button to get to the Phone Options where the Silent mode, Airplane mode, Choose Profile, Screenshot, Reboot , and Power Off options are located. The touch screen becomes unresponsive, I have to power off the screen for a few seconds and turn it back on and the touch screen will work again. It just started doing this 2 weeks ago. I have tried different roms and no difference. I have performed task 29 no difference, even after fresh installation of roms with no other apps installed
Im suspecting a worn digitizer but not sure because it only does it after phone opentions menu is opened, other than that the touchscreen works fine. Than again not sure if its a rom issue because it does it with different roms even older ones i never had problems before. I just know how to flash roms and basic stuff and not that far advanced
By the way I have the latest MGLDR, and recovery, have performed task 29 and even tried it with the SD card out and same result
Any help would be greatly appriciated especially if you have had this exact problem please i want to hear from you
Thank you
Click to expand...
Click to collapse
Me too
bib*oops said:
Sure he meant this, in order to make sense!
Solution: another touchscreen/digitizer or even better(but more expensive) new combo(lcd+touchscreen/digitizer)!
Click to expand...
Click to collapse
that's what I'm getting
mexicandroid said:
Well took it to a local repair shop and guy told me the wires looked good and said maybe the motherboard was going out, well if it is guess I'll use my wife's Samsung Vibrant which I must say has never had any problems with, until its time for a contract renewal for me
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
I highly doubt the board is bad. I already took mine apart, a collection of dust and dirt causes the end button to mess up the contacts. Your board is probably fine if you aren't experiencing overheating or any other symptoms, no offence, he probably just wanted more work to do so they could charge you more. I've done some computer repairs for family and friends and it's ridiculous the bull that repair stores throw at you
Sent from my GT-I9100 using Tapatalk
elesbb said:
Me too
that's what I'm getting
I highly doubt the board is bad. I already took mine apart, a collection of dust and dirt causes the end button to mess up the contacts. Your board is probably fine if you aren't experiencing overheating or any other symptoms, no offence, he probably just wanted more work to do so they could charge you more. I've done some computer repairs for family and friends and it's ridiculous the bull that repair stores throw at you
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I'm not experiencing overheating issues, the guy didn't charge and said he didn't have another motherboard to swap out with and test. He didn't charge me anything at least. I know its ridiculous how much they charge sometimes but its out of warranty so I don't have much choice and I'm scared to take it apart and damage something else but I have no other choice now lol. Did you look at a video before you took your apart?
Also was your phone doing the exact same thing? It does make sense it could be a dirty contact, I work ata Chevy dealer and bad contacts sometimes do weird things but sometimes at the lock screen the touch screen won't work also and I have to turn of t the screen for it to work
Sent from my HD2 using xda premium
mexicandroid said:
I'm not experiencing overheating issues, the guy didn't charge and said he didn't have another motherboard to swap out with and test. He didn't charge me anything at least. I know its ridiculous how much they charge sometimes but its out of warranty so I don't have much choice and I'm scared to take it apart and damage something else but I have no other choice now lol. Did you look at a video before you took your apart?
Also was your phone doing the exact same thing? It does make sense it could be a dirty contact, I work ata Chevy dealer and bad contacts sometimes do weird things but sometimes at the lock screen the touch screen won't work also and I have to turn of t the screen for it to work
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Yes exactly the same thing like 100 percent exactly. And yes I did the hardest part is getting the device out of the case lol the rest is quite simple.
Sent from my GT-I9100 using Tapatalk
elesbb said:
Yes exactly the same thing like 100 percent exactly. And yes I did the hardest part is getting the device out of the case lol the rest is quite simple.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
did you use a plastic tool or a small screwdriver to get the phone out of the case?
Sent from my HD2 using xda premium
mexicandroid said:
did you use a plastic tool or a small screwdriver to get the phone out of the case?
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Small screwdriver, didn't want to but I was very careful and made sure I didn't hit anything
Sent from my GT-I9100 using Tapatalk
elesbb said:
Small screwdriver, didn't want to but I was very careful and made sure I didn't hit anything
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
After I take the cover of do I have to disconnect anything? I tried finding a video about it but no luck
Sent from my HD2 using xda premium
mexicandroid said:
After I take the cover of do I have to disconnect anything? I tried finding a video about it but no luck
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
No luck??? lol look my friend i am your luck
elesbb said:
No luck??? lol look my friend i am your luck
Click to expand...
Click to collapse
Lol thanks I meant after I take the cover off, I was able to take the plastic buttons of but I didn't see much dust, I **** a little compressed air but that's all, how did you clean up the actual buttons?
Well I put it back together after blew the buttons but for a little while the touchscreen was not working at all, I rebooted a few times and it started working but same problem
Just wanted to know how you cleaned the buttons if I'm missing something. I really want to fix it because I don't to use my wife HD2, I'll never hear the end of it from her because I always tell her phone is better lol
Sent from my HD2 using xda premium
mexicandroid said:
Lol thanks I meant after I take the cover off, I was able to take the plastic buttons of but I didn't see much dust, I **** a little compressed air but that's all, how did you clean up the actual buttons?
Well I put it back together after blew the buttons but for a little while the touchscreen was not working at all, I rebooted a few times and it started working but same problem
Just wanted to know how you cleaned the buttons if I'm missing something. I really want to fix it because I don't to use my wife HD2, I'll never hear the end of it from her because I always tell her phone is better lol
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
Lol. what cover are you talking about? i just followed the one video and blew compressed air through ever little nook and crany. It didnt fix it completely as im not too worried about it since my digitizer is shattered. So i'll be more worried about it once i get a new digitizer. But just follow one of the videos on youtube, they take the thing apart all the way down to individual parts.
Hey use attached apk, and remap one of your other buttons to function as the power button. I have mine set to the green button since i dont use it anyhow. That way the endkey doesnt get used so much. It works perfectly. once i get a new display im gonna rig a way to keep this from happening again.
elesbb said:
Hey use attached apk, and remap one of your other buttons to function as the power button. I have mine set to the green button since i dont use it anyhow. That way the endkey doesnt get used so much. It works perfectly. once i get a new display im gonna rig a way to keep this from happening again.
Click to expand...
Click to collapse
thanks but now my touchscreen does not work at all now. Maybe it was just the digitizer going bad in my phone. I'm using a Samsung Vibrant which in my opinion sucks, I just got it rooted, now I need install CM7, I miss my HD2 so much. I think I'm just going to order a digitizer from Ebay and try to install myself
damn the HD2 phone owners have so many rom choices compared to this vibrant
Sent from my SGH-T959 using XDA
mexicandroid said:
thanks but now my touchscreen does not work at all now. Maybe it was just the digitizer going bad in my phone. I'm using a Samsung Vibrant which in my opinion sucks, I just got it rooted, now I need install CM7, I miss my HD2 so much. I think I'm just going to order a digitizer from Ebay and try to install myself
damn the HD2 phone owners have so many rom choices compared to this vibrant
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
Ha, have you tried rebooting the HD2? If i hit the end key, it stops working completely, but after a reboot it works again. So far it hasnt stopped working since i remapped the green key to be power key. And yeah i had to use my Touch Pro 2 until i finally got an HD2. I cant wait to get a job and get an SGS2 though. Thats an amazing phone.
elesbb said:
Ha, have you tried rebooting the HD2? If i hit the end key, it stops working completely, but after a reboot it works again. So far it hasnt stopped working since i remapped the green key to be power key. And yeah i had to use my Touch Pro 2 until i finally got an HD2. I cant wait to get a job and get an SGS2 though. Thats an amazing phone.
Click to expand...
Click to collapse
My wife has the sg2 but won't let me touch it. There nice but I want a phone with a quad core processor like the HTC one, that's what I'm waiting for
Sent from my SGH-T959 using XDA