Related
Ok, so I have a new Nook Color with 1.2 stock. I booted it up registered it and then I used the manual rooter method. It seemed to root fine but when I started my nook color again it showed some new animation and then after that it wanted me to register it again with B&N. I tried to register but my nook color keyboard pops up and disappears again and will not let me enter any information. I tried reverting back to stock by the 8 failed boot methods but it still shows the new animation and the keyboard still acts the same way. I try using CWR but I cannot format and erase anything. So any clues?
Another question I have is I can use my Nook color with a SD card running Cynamod 7 and it works fine. My question is when I am running from the SD card can I take the card out while the nook color is on and put in another card with lets say music and such?
Any help would be greatly appreciated.
Thank you in advance
Stupid question: I've had problems on 2 different Nook Colors with "phantom clicks" where, if there is some residue on the screen, it will click there. It's possible that was happening on one of the fields, de-selecting it. Is your screen very clean?
kypen said:
Stupid question: I've had problems on 2 different Nook Colors with "phantom clicks" where, if there is some residue on the screen, it will click there. It's possible that was happening on one of the fields, de-selecting it. Is your screen very clean?
Click to expand...
Click to collapse
I tried cleaning my screen and I still have the same problem. Thanks for the advice
john1970 said:
Ok, so I have a new Nook Color with 1.2 stock. I booted it up registered it and then I used the manual rooter method. It seemed to root fine but when I started my nook color again it showed some new animation and then after that it wanted me to register it again with B&N. I tried to register but my nook color keyboard pops up and disappears again and will not let me enter any information. I tried reverting back to stock by the 8 failed boot methods but it still shows the new animation and the keyboard still acts the same way. I try using CWR but I cannot format and erase anything. So any clues?
Another question I have is I can use my Nook color with a SD card running Cynamod 7 and it works fine. My question is when I am running from the SD card can I take the card out while the nook color is on and put in another card with lets say music and such?
Any help would be greatly appreciated.
Thank you in advance
Click to expand...
Click to collapse
Is / was it plugged into power or usb at the time? I've had plenty of occasions where heat from charging has played havoc with my screen, from complete unresponsiveness to phantom touches no where near where I wanted to touch? Second question....No clue, I run from EMMC.
hockeyfamily737 said:
Is / was it plugged into power or usb at the time? I've had plenty of occasions where heat from charging has played havoc with my screen, from complete unresponsiveness to phantom touches no where near where I wanted to touch? Second question....No clue, I run from EMMC.
Click to expand...
Click to collapse
No it is not plugged in
I have tried it unplugged, plugged in, plugged in to computer, unplugged from computer, cleaned the screen, used a stylus and still no help. The keyboard will pop open and then close. I think I really messed up my nook and will have to run it from SD card which android does run fine.
So since knowone has an answer is it possible to format the full partition on the nook color and then reinstall the original stock image. I tried reinstalling the stock image but that did nothing. I was just wondering if I can format the nook color that would get rid of all the images of rooting and such.
I'm having this exact same problem. Were you able to fix it?
ieaiaio said:
I'm having this exact same problem. Were you able to fix it?
Click to expand...
Click to collapse
Actually yes I was. I did the 8 failed boot and then after that I did reset to factory defaults by pressing and holding the power button and the n button while booting after a few seconds I released the power button and kept the n button pressed and it went in to a factory restore. It took a couple of tries.
Hope this helps
Have a nook color, cm7 - screen will not light. Power will cut on and off (i can tell because volume buttons produce noise when on). Screen gives no illumination when on.
Nothing software or programming updated or changed that would have caused it. I've charged it overnight and attempted to cut on while plugged in.
Plugged back into laptop via USB and I can see (nook color icon with yellow exclamation point) but still no screen.
I'm at a loss. Searched all posts but cannot find one similar. Thx!
I know that this happens and is fixable, although I cannot remember where I saw the "official" fix. If you have nandroid backups on a SD card, you could hard reboot the nook with the 8x reboot, and then reflash CWM and restore your backup.
Are you willing to lose your data and temporarily revert to stock?
I'll give anything a try.
Thanks for the idea. I'll try this in the morning and repost. I had thought about hard booting and taking it back but was worried they wouldn't replace it since it had been rooted. I'll go back and research the steps you mentioned. I'm not a techie so it will take a fresh mind and some coffee to pull it off. I was beginning to think it was a bad screen.
Power off nook, and power it back on. As soon as it begins to load, press n, power, and volume+ (I learned it with both volume keys, but I just heard it may only need the +) and hold for about ten seconds. The nook will flash off, release buttons. The nook will automatically restart, so after you release the keys, you want to repress them gain right as it starts to boot (where you would normally see the cyanogen logo). After the eigth time it will load into froyo firmware. If you. Misstime the sequence you will need Ronstadt over, so if it doesn't work the first time, just try again. Maybe a dark room, so you can see the slight illumination somewhat.
Bad screens do happen, I suppose, but the nook is unbrickable from a software standpoint. The primary boot is off the sdcard, so there is always a way to circumvent or preempt anything that may be corrupted internally. If you were to have a bad screen, after you hard reboot the nook, it will load the stock OS, but if you flashed CWM internally that will still be in your emmc. The way to get rid of the CWM is to follow the hard reboot with a factory reset through the froyo menu (standard nook OS for any future readers). If your screen is indeed bad, you can take your chances that they wont notice since they are replacing an obvious hardware issue, or you could hold it next to a working nook and base your touches approximately off that. There aren't that many steps, but you.do have to go through the B&N registration process, and your user name and password would be a *****.
I might just hard reboot and roll the dice myself, although I haven't personally heard of a bad screen yet. Good luck.
Solution worked!!
Thanks so much.....I couldn't get the 8x to work because the screen was not on and I couldn't time it right. The only way I could tell if it was on or off was with the power button making noises. So I held down power and N button together until flash. After the flash the cm7 open screen popped up. woot woot. and many thanks but I can only push the button once.
Hello all, I'm curious to hear your thoughts and advice.
My nook is completely unresponsive. It is not stuck at rooted forever.
In fact this has nothing with a root attempt/reset/restore/power on.
I had done a a fresh reset/root with touchnooter about four months ago and was happily and smoothly reading for about two months. I then got busy and put the nook down, did not touch or use for about another two months. I tried to use it about a week ago but found that it had run out of battery in sleep after the two months of disuse (not surprising). I put it on charge overnight and everything booted right and functioned well once it turned on, except that the battery indicator in the statusbar showed a "?" and the battery info in system info showed 100% "unknown". After alot of fruitless research I put it down with the intention of reset/restore/root when I had the time.
I just picked it up this morning and was faced with the expected "Press then button below to wake up your NOOK" screen. But when I pressed the "n" button nothing happened. Obviously holding the "n" did nothing as well.
I tried to power it off and on- nothing
holding power for 20- nothing
power for 30- nothing
8 failed boots- nothing
left right- nothing
left right power-nothing
random pushing and holding of power- nothing
all these with mem card in and out- nothing
all these plugged usb- nothing
all these pugged ac- nothing
I let it charge some more- nothing
None of the buttons do anything, the screen stays inevitably at the " press the n button to wake" screen. no activity whatsoever except that when It is plugged in, the green light shows. NO ORANGE LIGHT... it is fully charged by both usb and ac.
It is not detected at all by windows anywhere.
In Linux- lsusb, bklid, and df -h yield nothing. My nook might as well be the invisible stupid ereader.
I did not drop it, sumbmerge it, perform magic around it... It has been sitting on a shelf doing nothing.
To repeat, the only thing my nook does is light up green when plugged.
It is unchangeably stuck on poe's face...
If this isn't true brick, I don't know what is.
I'm exhausted. Any ideas? I appreciate the help.
Best,
Thomas
i don't know. i just know my dog ate mine and i'm now in the market for a new screen, so if you don't get it working sell me the unit and get some money for yourself to purchase a new one =D
or you could google the disassembly instructions and try unplugging the battery, not very hard to do. could be of .. some help perhaps?
I would definitely take you up on your offer, but i'm still under warranty.
However, I would still like to have my original, and figure out what is going on and why it happened.
Ideas?
Thank you.
similar problem were solved
Hi! I might have read about similar problem solved on USB host mode here http://forum.xda-developers.com/showpost.php?p=23475998&postcount=131
That's it, thanks so much.
if it help
if it helps let them know in the tread that you had same problem. they are wondering whether it is due to host mode
[N2E]: After automatic update to 1.1, Nook Touch Screen absolutely DEAD--Nothing Work
THIS WAS A POST FROM ANOTHER SITE AS TO MY PROBLEM:
I was reading on my N2E last night. I put it down for about 30 minutes and when I came back it was displaying the default "Authors" screensaver (I had switched to the Nature photos) and asking to slide to unlock. I thought, "Oh, the new software update must have downloaded and installed. I'll check it out." To my shock, the touch screen was completely unresponsive--no amount of swiping would unlock from the screen saver. I let it set for a while longer thinking perhaps the softare update was not yet finished. No such luck.
As a result of the new update, my NOOK is now completly DEAD! I tried powering off, but couldn't do that because you are asked to confirm power off on the touchscreen, which no longer works. So, I looked online and tried the soft reset/reboot by holding down the "Home" or "n" button and then pressing the power button for several seconds. Great--it started rebooting...and came right back to the "authors" screen saver and asking to swipe to unlock. I tried this rebooting process several times, always with the same result: back to screeensaver mode with completely unresponsive touchscreen.
So, looked at the online technical troubleshooting discussion and helps and decided to try a downloaded manual install of the software update. Plugged my NOOK into my computer and it recognized it. So, I downloaded the manualo software update and dragged and dropped it onto the NOOK as directed and sure enough, it started to reboot itself. I thought, "whew, maybe this will fix it". NOPE--came right back to the locked screensaver, with no mention of attempting to update software, and the touchscreen is still dead. (By the way, all of this was done initially with the NOOK showing about 94% charged, so it was not a battery issue.)
Reconnected the NOOK to my computer and the software update file was gone from its home directory, which implies it did something with it. So, I tried repeatedly to install the software update manually, always with the same result: NOOK comes back to locked default "authors" screensaver wtih a dead touchscreen.
Looked online for B&N technical support again saw that others had this problem (though only found a couple references). Found the instructions to do a factory reset and reluctantly tried that, desparate to make my NOOK work again, but frustrated that if it did I would have to rebuild everyting on it and download my 400+ B&N book library all over again. But, guess what, factory reset just comes up to the "Welcome to your all-new NOOK" screen (sounds like progress), BUT the touchscreen is STILL dead, so I can't hit the "Next" button onscreen to proceed with setting up my factory-reset NOOK. Tried rebooting again (as this seems to be the only solution offered in the online tech support) and now it just keeps coming back to the "Welcome to your all-new NOOK" screen with a dead touchscreen keeping me from doing anything.
So, now I am taking it back to my local B&N store in hopes they will exchange it for a new NOOK.
I really want to see a feature to disable automatic updates in the future. I specifically didn't download and manually install when the update came out, figuring I'd wait for the automatic download to give time to B&N to work out the bugs and perhaps issue a patch (as they have done in the past for the N1E). Instead I get no warning about the automatic download (happens while I am reading and set the NOOK aside for 30 minutes), and then the update KILLS my NOOK.
I am not a satisfied NOOK customer at this point.
MY POST: (from the that site)
Not Sure how to do this post or whatever, but I was happy until the update and everything that happened to you is the same with me. This is the first post that describes what happened to me. I'm out of warranty and refuse (and can't) to buy another one of these. If their updates can do this, I'm not sure I want to sink another $100 into the shareholders pockets. I'd really like to know if anyone knows what may be wrong with it.
In addition to what was already mentioned, I took the battery out several times(which seems intimidating but very easy but voids the warranty) and took it completely apart cleaning the screen very well with water and another time a glass cleaner. I tried rooting also. Not sure of what to do now. It seems software related due to working fine until the update. Still at the "Welcome to your all-new NOOK" screen with unresponsive screen. I wasn't sure if the last sentence from B&N was a personal message to me welcoming me to the "new" state of the my nook.
Thanks for any help from anyone.
Thanks.
Identical problem.... and no fix..
It is a shame you got no solution for this. and the worst, you are not the only one... it happened exactly the same with my Nook ST....
Hopeless...
Machiavelli_The_Man said:
THIS WAS A POST FROM ANOTHER SITE AS TO MY PROBLEM:
I was reading on my N2E last night. I put it down for about 30 minutes and when I came back it was displaying the default "Authors" screensaver (I had switched to the Nature photos) and asking to slide to unlock. I thought, "Oh, the new software update must have downloaded and installed. I'll check it out." To my shock, the touch screen was completely unresponsive--no amount of swiping would unlock from the screen saver. I let it set for a while longer thinking perhaps the softare update was not yet finished. No such luck.
As a result of the new update, my NOOK is now completly DEAD! I tried powering off, but couldn't do that because you are asked to confirm power off on the touchscreen, which no longer works. So, I looked online and tried the soft reset/reboot by holding down the "Home" or "n" button and then pressing the power button for several seconds. Great--it started rebooting...and came right back to the "authors" screen saver and asking to swipe to unlock. I tried this rebooting process several times, always with the same result: back to screeensaver mode with completely unresponsive touchscreen.
So, looked at the online technical troubleshooting discussion and helps and decided to try a downloaded manual install of the software update. Plugged my NOOK into my computer and it recognized it. So, I downloaded the manualo software update and dragged and dropped it onto the NOOK as directed and sure enough, it started to reboot itself. I thought, "whew, maybe this will fix it". NOPE--came right back to the locked screensaver, with no mention of attempting to update software, and the touchscreen is still dead. (By the way, all of this was done initially with the NOOK showing about 94% charged, so it was not a battery issue.)
Reconnected the NOOK to my computer and the software update file was gone from its home directory, which implies it did something with it. So, I tried repeatedly to install the software update manually, always with the same result: NOOK comes back to locked default "authors" screensaver wtih a dead touchscreen.
Looked online for B&N technical support again saw that others had this problem (though only found a couple references). Found the instructions to do a factory reset and reluctantly tried that, desparate to make my NOOK work again, but frustrated that if it did I would have to rebuild everyting on it and download my 400+ B&N book library all over again. But, guess what, factory reset just comes up to the "Welcome to your all-new NOOK" screen (sounds like progress), BUT the touchscreen is STILL dead, so I can't hit the "Next" button onscreen to proceed with setting up my factory-reset NOOK. Tried rebooting again (as this seems to be the only solution offered in the online tech support) and now it just keeps coming back to the "Welcome to your all-new NOOK" screen with a dead touchscreen keeping me from doing anything.
So, now I am taking it back to my local B&N store in hopes they will exchange it for a new NOOK.
I really want to see a feature to disable automatic updates in the future. I specifically didn't download and manually install when the update came out, figuring I'd wait for the automatic download to give time to B&N to work out the bugs and perhaps issue a patch (as they have done in the past for the N1E). Instead I get no warning about the automatic download (happens while I am reading and set the NOOK aside for 30 minutes), and then the update KILLS my NOOK.
I am not a satisfied NOOK customer at this point.
MY POST: (from the that site)
Not Sure how to do this post or whatever, but I was happy until the update and everything that happened to you is the same with me. This is the first post that describes what happened to me. I'm out of warranty and refuse (and can't) to buy another one of these. If their updates can do this, I'm not sure I want to sink another $100 into the shareholders pockets. I'd really like to know if anyone knows what may be wrong with it.
In addition to what was already mentioned, I took the battery out several times(which seems intimidating but very easy but voids the warranty) and took it completely apart cleaning the screen very well with water and another time a glass cleaner. I tried rooting also. Not sure of what to do now. It seems software related due to working fine until the update. Still at the "Welcome to your all-new NOOK" screen with unresponsive screen. I wasn't sure if the last sentence from B&N was a personal message to me welcoming me to the "new" state of the my nook.
Thanks for any help from anyone.
Thanks.
Click to expand...
Click to collapse
The factory restore does not actually fix every possible problem with your Nook.
If your Nook responds at all, try to boot it up on an SD card like ClockworkMod or noogie.
At least that way you can see what is happening.
The partitioning might have become corrupted which the "factory restore" does not touch.
If no response with anything, try disconnecting the battery.
You might also try booting over USB using the techniques in rooting the new white glow.
Hello I was wondering if I'm just screwed I bought 2 nook simple touch, one for me and one for a present to my mother for her birthday on march 16. I bought them at best buy for $40 a piece on January 30. I used mine and was perfect but when I tried to set up my mom it wouldn't load the license agreement, always got stuck or reboot or something, so I loaded cwm on an sd card just to play around, tested on my nook and was fine, then put it on my moms nook booted once then I didn't press anything and turn it off then I load the image but when I tried to boot again it got stuck on the load screen and wont do anything, no reset sequence will work with the sd card on or off the other nook boots with this sd card. at the end I exchanged with my mom she is happy with her nook an I have a useless unit do you think they will exchange it I didn't rooted it or did anything to it but has the n cwm splash on screen forever. I'm in Costa Rica right now and wont return home until May do you think I'll might be able to exchange it or should I just try to repair it.
I'm glad that your mother got the working one!
You say that that one will boot on your CWM SD card, but yours won't?
It may be hard to get your unit exchanged with a conspicuous screen on it, even if it's not your fault.
When you plug it into your desktop is there any indication of a new USB device found?
If it's charged and no amount of the power button gets a reaction, I'd open it up.
any news???
Hi endor43, same problem here, have been able to find any solution?
endor43 said:
Hello all, I'm curious to hear your thoughts and advice.
My nook is completely unresponsive. It is not stuck at rooted forever.
In fact this has nothing with a root attempt/reset/restore/power on.
I had done a a fresh reset/root with touchnooter about four months ago and was happily and smoothly reading for about two months. I then got busy and put the nook down, did not touch or use for about another two months. I tried to use it about a week ago but found that it had run out of battery in sleep after the two months of disuse (not surprising). I put it on charge overnight and everything booted right and functioned well once it turned on, except that the battery indicator in the statusbar showed a "?" and the battery info in system info showed 100% "unknown". After alot of fruitless research I put it down with the intention of reset/restore/root when I had the time.
I just picked it up this morning and was faced with the expected "Press then button below to wake up your NOOK" screen. But when I pressed the "n" button nothing happened. Obviously holding the "n" did nothing as well.
I tried to power it off and on- nothing
holding power for 20- nothing
power for 30- nothing
8 failed boots- nothing
left right- nothing
left right power-nothing
random pushing and holding of power- nothing
all these with mem card in and out- nothing
all these plugged usb- nothing
all these pugged ac- nothing
I let it charge some more- nothing
None of the buttons do anything, the screen stays inevitably at the " press the n button to wake" screen. no activity whatsoever except that when It is plugged in, the green light shows. NO ORANGE LIGHT... it is fully charged by both usb and ac.
It is not detected at all by windows anywhere.
In Linux- lsusb, bklid, and df -h yield nothing. My nook might as well be the invisible stupid ereader.
I did not drop it, sumbmerge it, perform magic around it... It has been sitting on a shelf doing nothing.
To repeat, the only thing my nook does is light up green when plugged.
It is unchangeably stuck on poe's face...
If this isn't true brick, I don't know what is.
I'm exhausted. Any ideas? I appreciate the help.
Best,
Thomas
Click to expand...
Click to collapse
There are times when a Nook gets in a mode where it won't accept a charge.
Opening it up and disconnecting the battery for a minute might fix this.
endor43 said:
That's it, thanks so much.
Click to expand...
Click to collapse
When this worked for you did the light turn orange right when you plugged the battery back in? I just took the battery out, plugged the nook into a charger, and with it plugged in plugged the battery back in and the light stays green the whole time yet I'm not able to use the nook at all.
My nook second generation is not responding to my touch I tried everything to get it to work and I eventually got it to completely power of what if it does not work when I turn it on what should I do
It could be power/battery problems.
Check to see if it makes itself known when the USB is plugged in.
If it reacts at all, that's an indication of life.
Hello,
I have a Nook Color 8gb first gen that I have put CM 10 (10-20130414-nightly-encore) on. My problem is that sometimes the tablet seems to take on a life of its own and what it seems to be doing is to be persisting screen taps. So for example you will be typing with the on screen keyboard and all of a sudden it will keep hitting a key even while your not still touching the screen. This also occurs while playing games the game will keep on playing even while your not tapping the screen again I think it is persisting previous taps.
I have tried two CM 10 builds with no luck. I have cleaned the screen - no luck. I have rebuilt the tablet - no luck.
I was wondering if anyone else had the same issue and how they resolved it if at all?
Thanks
Check out Nook Screen Recalibrate from the market and make sure the screen is very clean. I know you said you cleaned it but they can be really picky.
Sent from my HTC Fireball
wmuflyer said:
Check out Nook Screen Recalibrate from the market and make sure the screen is very clean. I know you said you cleaned it but they can be really picky.
Sent from my HTC Fireball
Click to expand...
Click to collapse
Thanks I recalibrated the screen and tried it for a few weeks. Strange thing is that for a little while the frequency of the stuck key problem went down but it still happens. Not sure if there is anything else I can do might try a new Cyanogenmod build but I don't think that is the problem I have a kindle fire that has Cyanogenmod on it with no problems so maybe just the device.
Thanks
I connected the Nook simple touch to load some books from my laptop. Windows explorer and Calibre both recognize the device and show the books in the device. However, even after 'ejecting' the nook from the laptop, the screen is stuck in 'USB mode'. I have repeatedly connected it to the laptop and my desktop with no change. I have charged it many times.. None of the usual tricks of holding down the power button at the back, holding down the power button and N worked. I opened the nook and disconnected the battery for a few minutes but nothing happened. Any suggestions would be greatly appreciated. The device is out of warranty.
Thanks
Peeam
peeam said:
I connected the Nook simple touch to load some books from my laptop. Windows explorer and Calibre both recognize the device and show the books in the device. However, even after 'ejecting' the nook from the laptop, the screen is stuck in 'USB mode'. I have repeatedly connected it to the laptop and my desktop with no change. I have charged it many times.. None of the usual tricks of holding down the power button at the back, holding down the power button and N worked. I opened the nook and disconnected the battery for a few minutes but nothing happened. Any suggestions would be greatly appreciated. The device is out of warranty.
Thanks
Peeam
Click to expand...
Click to collapse
Okay, I may be able to help.
Is there a microSD card in your Nook/is there one available?
Are you rooted? If so, what method did you use?
What model of Nook Touch is it? The Nook Touch Glow or just the plain Nook Touch?
What is the software version of your Nook?
My replies below in red
thenookieforlife3 said:
Okay, I may be able to help.
Is there a microSD card in your Nook/is there one available? : Yes, I have a microSD
Are you rooted? If so, what method did you use? Not rooted
What model of Nook Touch is it? The Nook Touch Glow or just the plain Nook Touch? Plain Nook touch
What is the software version of your Nook?
Click to expand...
Click to collapse
Cannot tell as the device is frozen on the USB screen
I left the battery disconnected for 30 minutes. No change. The folders in windows explorer are showing date of 1/1/2000 !
I can transfer files to NST through USB or microSD but as the device is frozen, not sure how to reboot it to read those files.
Thanks for your help.
Peeam
peeam said:
My replies below in red
Cannot tell as the device is frozen on the USB screen
I left the battery disconnected for 30 minutes. No change. The folders in windows explorer are showing date of 1/1/2000 !
I can transfer files to NST through USB or microSD but as the device is frozen, not sure how to reboot it to read those files.
Thanks for your help.
Peeam
Click to expand...
Click to collapse
Sure.
Alright, so just to make sure - holding the back power button has no effect whatsoever on the screen?
thenookieforlife3 said:
Sure.
Alright, so just to make sure - holding the back power button has no effect whatsoever on the screen?
Click to expand...
Click to collapse
Unfortunately no. Tried all possible combinations too and for different durations. I read somewhere that after disconnecting the battery, press power button for 60 seconds and leave the device unconnected for 30 minutes. Did that too.
peeam said:
Unfortunately no. Tried all possible combinations too and for different durations. I read somewhere that after disconnecting the battery, press power button for 60 seconds and leave the device unconnected for 30 minutes. Did that too.
Click to expand...
Click to collapse
How long has this problem been occurring for? (How long has your screen been stuck?)
I'm guessing that this is a hardware issue, as there is no way that the actual device is not responding to the on/off button on the back. I think that it really is responding to it, but you can't see it happening because the screen is stuck at the USB Mode box.
Try this:
Connect the Nook to your computer via USB.
Open Windows explorer to "My Computer" so that you can see the Nook "drives".
Now push the power button on the back of the Nook and hold it for up to 30 seconds.
Observe if the Nook "drives" disappear and then reappear in Windows Explorer.
If they do, that is an indication that your Nook has rebooted. If this happens, it is likely that your Nook is "functioning fine" and the eInk display is broken.
David0226 said:
Try this:
Connect the Nook to your computer via USB.
Open Windows explorer to "My Computer" so that you can see the Nook "drives".
Now push the power button on the back of the Nook and hold it for up to 30 seconds.
Observe if the Nook "drives" disappear and then reappear in Windows Explorer.
If they do, that is an indication that your Nook has rebooted. If this happens, it is likely that your Nook is "functioning fine" and the eInk display is broken.
Click to expand...
Click to collapse
Ah, yes. This would be a good indicator.
Thanks, David!
Quick message to David0226:
Have you decided about your signature yet?
thenookieforlife3 said:
How long has this problem been occurring for? (How long has your screen been stuck?)
I'm guessing that this is a hardware issue, as there is no way that the actual device is not responding to the on/off button on the back. I think that it really is responding to it, but you can't see it happening because the screen is stuck at the USB Mode box.
Click to expand...
Click to collapse
You may be right about the hardware. We had given this as a gift to someone in Australia who recently returned it as 'not working'. I do not have the details of what was not working. The screen looked OK with the screen saver but I did not check the functions except for charging it. I connected it to the PC to remove the books that were on it and load new ones which went OK. When I disconnected the device, I discovered the USB Mode screen not going away.
Now that it is 'bricked', I do not mind playing around with the hardware if you have any suggestions.
Thanks for your help.
Peeam
peeam said:
You may be right about the hardware. We had given this as a gift to someone in Australia who recently returned it as 'not working'. I do not have the details of what was not working. The screen looked OK with the screen saver but I did not check the functions except for charging it. I connected it to the PC to remove the books that were on it and load new ones which went OK. When I disconnected the device, I discovered the USB Mode screen not going away.
Now that it is 'bricked', I do not mind playing around with the hardware if you have any suggestions.
Thanks for your help.
Peeam
Click to expand...
Click to collapse
Try this thread: kindle 3 lcd in nook ST - is it possible ???
There seems to be a bit about screen hacking/changing in there.
Let me know how it goes! :laugh:
thenookieforlife3 said:
Try this thread: kindle 3 lcd in nook ST - is it possible ???
There seems to be a bit about screen hacking/changing in there.
Let me know how it goes! :laugh:
Click to expand...
Click to collapse
Thanks for the great suggestion- will keep you posted !
So it does appear to be a screen problem as the re-booting test in windows explorer was positive.
The replacement screens on ebay for NST or Kindle 3 start around $30. I do not think that it is worth the expense as used NST can be purchased for a few dollars more.
Thanks for your helpful suggestions in arriving at a diagnosis. I used this to become an expert in taking NST apart- did that 4 times !:fingers-crossed:
Regards
Peeam
peeam said:
So it does appear to be a screen problem as the re-booting test in windows explorer was positive.
The replacement screens on ebay for NST or Kindle 3 start around $30. I do not think that it is worth the expense as used NST can be purchased for a few dollars more.
Thanks for your helpful suggestions in arriving at a diagnosis. I used this to become an expert in taking NST apart- did that 4 times !:fingers-crossed:
Regards
Peeam
Click to expand...
Click to collapse
I agree wholeheartedly to that - the only real reason to actually get a new screen would be if you were rooted and had a ton of stuff on your Nook that you seriously didn't want to lose.
Glad to help, though!