MIUI for defy plus can't receive call - Defy Q&A, Help & Troubleshooting

×—Hi all, I've successfully installed WajUI - a MIUI version for the defy+ on my friend's phone.
Everything works except for receiving calls. I don't know what I can do.
The error I get is."Unfortunately, the process com.android.phone has stopped"
Tried reboot, calling in different modes, etc. No use. But I can make calls, and I can see who called.
I tried cm slim but had no reception at all.
Tried MIUI v4 but no camera.
Help would be very appreciated..
attached is a screen shot of the Rom details. https://db.tt/BzSfALPH
Sent from my GT-I9300 using xda app-developers app

Clean install (wiping system, data and cache) fixes all such strange issues
Sent from my MB526 using Tapatalk 2

so just wipe data plus cache,
wipe dalvik, and install the ROM again?
Sent from my GT-I9300 using xda app-developers app

or the other way around? anyway I just tried both options, but still. same error.
Sent from my GT-I9300 using xda app-developers app

Related

Hi guys little help

Hi my friend has the defy and has been sent a replacement by Tmobile as original was faulty. It has come back with 2.3.3 on it and its so much slower now. My question is will rooting it and instaling cm9 etc speed it up a lot?
Sent from my GT-I9300 using xda app-developers app
Hey
If he wants a system that runs very stable and also smooth, he should give CM7 a try.
I wouldnt recommend CM9 since its death on the defy.
CM10 has come to a point where its very usable, ive been using it in the past weeks and i had not a single problem with it
Thanks for the reply dude. Iv rooted with super one click but everytime I try flash CWM I get stuck in boot loops any idea? I use RDS to go back to start again and keep trying but same old carry on
Sent from my GT-I9300 using xda app-developers app
Hope that you're wiping data, cache and dalvik cache after flashing via CWM.
I can't get cwm to install aha I'm going to try 2ndint apk
Sent from my GT-I9300 using xda app-developers app
Yup. You need to install 2ndinit to get CWM onto a stock ROM.

phone is getting reboots

i had flashed an incompletely downloaded rom[that i didnt know] ......
after that am getting reboots even on most stable ARHD .............
Now am on ARHD 7.0.4 .....
reboots wont come continously.....
.the phone may work for one or 2 days without any reboots.....
it may reboot during charging , while surfing in internet etc.....no particular situation for it to come........
need help please.......................
Try wiping data and flash another ROM.....could be some problem in the ROM.
Sent from my GT-S5570 using xda app-developers app
starbriganza said:
Try wiping data and flash another ROM.....could be some problem in the ROM.
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
got reboot on sabsa prime, ice cold sandwitch etc etc.....:crying:
Hard luck then.....hope someone helps you.
Sent from my GT-S5570 using xda app-developers app

Cm 10.1.3 no 4g

I decided to give cm10.1.3 a try now that it is stable. I've flashed cm on many devices without trouble including this s4. But this time when the phone booted, I had LTE displayed as connected in the status bar but couldn't get any throughput. 3g works fine when I switch to CDMA only. So as a test I flashed 10.2 nightly (which I have run before without issues) and no LTE with it either. So I dug up an old 10.1 nandroid which was fully backed in good shape and holy crap!! No LTE!!! So I flashed back to touchwiz nandroid and LTE works fine. What's up. Very weird. Any ideas.
Sent from my SPH-L720 using xda app-developers app
Same here I'm having troubles with LTE on my s4 running the latest version of beanstalk ROM and I live in a LTE area and have always have been able to get LTE. Any ideas?
Sent from my SPH-L720 using xda app-developers app
No..I tried re-downloading the ROM from other sources. Still 4g connects but is super slow. Like 5 mins to open a web page. I have great 4g coverage at home usually. 3g Is working good though.
Sent from my SPH-L720 using xda app-developers app
Im not sure but try a apn back up on stock rom, then reflash cm.
Sent from my SPH-L720 using xda app-developers app
Thanks gottablunt..will try that and post back
Sent from my SPH-L720 using xda app-developers app
Apparently you can't backup APN on 4.x ROMs? Not without purchasing titanium backup at least
Sent from my SPH-L720 using xda app-developers app
So I figured it out. 4g wasn't working because I'm an idiot and was wiping everything including system. Didn't realize there were settings that need to be left for cm to connect. At least that's the only reason I can think of. Hope this helps someone else so its not a total waste of forum space.
Sent from my SPH-L720 using xda app-developers app
I wiped my system a few days ago when I was flashing the latest beanstalk build, that explains why late isn't working. What should I do to fix it?
Sent from my SPH-L720 using xda app-developers app
If you have a backup of stock or another touch wiz ROM, flash back to that. Then boot into recovery, and do a factory restore. That will wipe data,cache,and dalvic, but leave the system intact. Then just flash cm or other aosp rom and reboot. Should be good to go!
Sent from my SPH-L720 using xda app-developers app
Thanks so much man LTE is back for me finally
Sent from my SPH-L720 using xda app-developers app
Glad it worked out!
Sent from my SPH-L720 using xda app-developers app
prc292 said:
If you have a backup of stock or another touch wiz ROM, flash back to that. Then boot into recovery, and do a factory restore. That will wipe data,cache,and dalvic, but leave the system intact. Then just flash cm or other aosp rom and reboot. Should be good to go!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Just wanted to report that I came in here with the exact same problem and this fixed it for me as well. I was running the Pac Rom nightly and was pulling my hair out trying to figure this out. I too had formatted system just by force of habit. Maybe this should be mentioned in install tutorials not to do that.

[Q] Phone sound not working on Quarx 10.2

Hi,
I recently installed 10.2 by quarx. IIRC, the phone worked in the beginning, but now I lost all sound during calls. It still works for all other apps, but not when calling someone or being called. What information do you guys need to help me fix this?
I have done a dalvic and cache wipe, but to no avail.
Thanks
Is your Bluetooth on? If it is, switch it off.
Sent from my MB526 using xda app-developers app
this issue also appear in Quarx 1117 cm11 package.but now quarx has fixed it.
Sent from my MB526 using xda app-developers app

White rabbit ROM fail to cm10.

hi guys.
I've tried unsuccessfully to install the ROM White Rabbit. Following the instructions, i have installed the kernel, zip files, and then went fail, factory reset and set off for repair.
So I've install SBF files, root, and sdinit, CM10 ROM flash.
the phone is back to normal, except that all calls are completely muted and unable to connect on HSPA network as before.
any suggestions? I need another kernel? please help me, thanks
Sorry for my english!
Sent from my MB526 using xda app-developers app
Network issue: baseband switcher
Muted calls: probably the same issue, but if you cannot fix it, try a system wipe and clean install
Sent from my MB526 using Tapatalk 2
I've tried change the baseband, but no one solve the problem.
I did a full wipe again, and nothing new. Do you suggest a factory reset to the original Motorola version and do all the process since the beginning?
Sent from my MB526 using xda app-developers app
If no baseband works, copy over baseband from stock in which radio works. You should start from beginning, and don't forget system wipe before install cm10
Sent from my MB526 using Tapatalk 2
Tks!
thekguy said:
If no baseband works, copy over baseband from stock in which radio works. You should start from beginning, and don't forget system wipe before install cm10
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Tks thekguy, works like a charm! A full wipe and all the process again solve everything!

Categories

Resources