hi guys.
I've tried unsuccessfully to install the ROM White Rabbit. Following the instructions, i have installed the kernel, zip files, and then went fail, factory reset and set off for repair.
So I've install SBF files, root, and sdinit, CM10 ROM flash.
the phone is back to normal, except that all calls are completely muted and unable to connect on HSPA network as before.
any suggestions? I need another kernel? please help me, thanks
Sorry for my english!
Sent from my MB526 using xda app-developers app
Network issue: baseband switcher
Muted calls: probably the same issue, but if you cannot fix it, try a system wipe and clean install
Sent from my MB526 using Tapatalk 2
I've tried change the baseband, but no one solve the problem.
I did a full wipe again, and nothing new. Do you suggest a factory reset to the original Motorola version and do all the process since the beginning?
Sent from my MB526 using xda app-developers app
If no baseband works, copy over baseband from stock in which radio works. You should start from beginning, and don't forget system wipe before install cm10
Sent from my MB526 using Tapatalk 2
Tks!
thekguy said:
If no baseband works, copy over baseband from stock in which radio works. You should start from beginning, and don't forget system wipe before install cm10
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
Tks thekguy, works like a charm! A full wipe and all the process again solve everything!
Related
Hello.
I installed this rom on my Rogers(Canada) X10. Everything went fine. But I have no wireless at all now and it says baseband unknown. I tried looking for APN settings but there's nothing there under mobile networks. This is my first time installing custom firmware and I'm rather lost. Can anybody help me please?
Hi
Did you make sure your on the correct baseband?
Did you flash a custom kernel?
Hi, I had same issue. What worked for me was using the Dev tools app and selecting bad behaviour then crash the system server. Phone rebooted and has been working fine since. Might be worth a try?
Sent from my X10i using XDA Premium App
Flash cm6bb49.zip
Sent from my X10i using XDA App
I read the Q&A but it seems that in order to select a baseband, I need to know what is is? But I can't because the system doesn't tell me. As for kernels and such, I'm at a complete loss lol. I just followed the instructions here: http://forum.xda-developers.com/showthread.php?t=945264 for installing the firmware.
rokca33 said:
Flash cm6bb49.zip
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I tried flashing using xrecovery and nothing changed. Still no baseband information.
andrewbowes said:
Hi, I had same issue. What worked for me was using the Dev tools app and selecting bad behaviour then crash the system server. Phone rebooted and has been working fine since. Might be worth a try?
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Nevermind. This worked! Although I tried it before ?_? Thanks guys!
I am having a problem with my Milestone 2. Sometimes, for no apparent reason the screen stops working and I have to turn off the phone through the physical buttons. Does anyone know what might be happening and how can I fix this?
Sorry for the bad english.
Thanks
Sent from my A953 using XDA App
What is the system version you're using?
Are you using the defy_more.ko/milestone2_more.ko kernel module for extended multitouch support?
First try a factory reset.
Then the second option, if you're rooted, try flashing a SBF.
If none of these work you'll have to send your phone in to Motorola (do you have warranty?).
Sent from my Milestone 2 XDA App
The system version is the original android 2.2
I have used milestone2_more.ko one time, but the problem already happened before that.
What happens if I do the Reset? Am I going to lose everifing thats in my phone?
Its rooted, so I lost my warranty... =/
Is there any other possible solution?
Sent from my A953 using XDA App
If you "unroot" the phone, the warranty is back
Sent from my Milestone 2 with CM7
And... how can I do that? XD
Sent from my A953 using XDA App
Make backup of your data and apps. Then flash original ROM via RSD lite and send it for repair. Or maybe the problem will stop after flashing original ROM.
br Zola
Well, I'll try the factory reset tomorrow. Hope it works, but if not I'll try the other opitions. I don't want to send it to the repair because it can take too long where I live.
Thanks, I'll post the results tomorrow.
Sent from my A953 using XDA App
I had this same bug a few weeks a go, just reset as factory default and now working fine.
Since I did the factory reset two days ago my phone is working fine, without the screen bug.
Thank you guys, that was realy making me angry xD
Sent from my A953 using XDA App
I have a Defy+ with DFP 1321 2.3.6...Rooted.CWM,2nd Init everything there.Installed CM 7.2...worked fine.
Flashed CM9 but It kept going to bootloader menu.wiped data and cache...still.flashed CM9, flashed kernel, flashed gapps.cleared cache and data...nothing wrong with the steps i guess.what's wrong?
Sent from my MB526 using XDA
BreakShadow said:
I have a Defy+ with DFP 1321 2.3.6...Rooted.CWM,2nd Init everything there.Installed CM 7.2...worked fine.
Flashed CM9 but It kept going to bootloader menu.wiped data and cache...still.flashed CM9, flashed kernel, flashed gapps.cleared cache and data...nothing wrong with the steps i guess.what's wrong?
Sent from my MB526 using XDA
Click to expand...
Click to collapse
go to bootloader and reboot it with normal option ....
Doesn't work...
Sent from my MB526 using XDA
Try to faktory reset after changing your rom .
Sent from my MB526 using XDA App
I tried factory reset...wiping cache everything...gave up and flashed the original sbf.I just can't run CM9...other ROMs work just great
Sent from my MB526 using XDA
BreakShadow said:
I tried factory reset...wiping cache everything...gave up and flashed the original sbf.I just can't run CM9...other ROMs work just great
Sent from my MB526 using XDA
Click to expand...
Click to collapse
No problem with your steps.. The problem is with the ROM you chose. Did you install CM9 for Defy+?? Do a Dalvik wipe too
Okay... The official thread says to flash cm9 kernel. I flashed without it. Now it works just fine
Sent from my MB526 using XDA
Hi my friend has the defy and has been sent a replacement by Tmobile as original was faulty. It has come back with 2.3.3 on it and its so much slower now. My question is will rooting it and instaling cm9 etc speed it up a lot?
Sent from my GT-I9300 using xda app-developers app
Hey
If he wants a system that runs very stable and also smooth, he should give CM7 a try.
I wouldnt recommend CM9 since its death on the defy.
CM10 has come to a point where its very usable, ive been using it in the past weeks and i had not a single problem with it
Thanks for the reply dude. Iv rooted with super one click but everytime I try flash CWM I get stuck in boot loops any idea? I use RDS to go back to start again and keep trying but same old carry on
Sent from my GT-I9300 using xda app-developers app
Hope that you're wiping data, cache and dalvik cache after flashing via CWM.
I can't get cwm to install aha I'm going to try 2ndint apk
Sent from my GT-I9300 using xda app-developers app
Yup. You need to install 2ndinit to get CWM onto a stock ROM.
Guys i have problems with JB SISTER.
I dont know why, but i can not post in defy developer.... then i'll post here.
Thread JB SISTER: http://forum.xda-developers.com/showthread.php?t=2192807
My problems with this version: frequent LAG, freeze when i open any app. The only way for restart android is remove the battery. Ah yes! the boot takes too long to start. Too long!!
Well, i had before this version Quarx version (4.1.1), and i only wiped data and flashed above it.
Then i think: I'll back to stock rom.
Following instructions, i back to retail stock android, because i did not want more problems. After this, i flashed the JB SISTER.
This time, freeze are less frequent but, when i open two or more apps, the system freeze fully, then i remove battery and it all starts again. The problem of boot takes too long continues.
I wonder if anything succeed solve this problem.
Anyway, i think of changing this version totally unstable.
Thanks so much.
nope bro i oo did tat wipe and made it proper which made me not to install fursquare and lots many apps ... which says ur not allowed to install itseems ...yukkk ..remaining everything is awe and faster not a single lag for me MB526 motorola defy + JB sister
bootmenu-cpu settings-scroll down-set to default (should be 3rd option from the bottom)
see if this helps?
Sent from my MB526 using xda premium
i did a clean install from cm9
i m having no problems like that
only one bug i m facing is
that
whenever i open stock gallery in any photo editor
the fone gets stuck
so i m using quick pic now
p.s.
if u touched any settings in performance menu
change it to default
Sent from my MB526 using xda premium
hackergnome said:
bootmenu-cpu settings-scroll down-set to default (should be 3rd option from the bottom)
see if this helps?
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Sorry guy, but not solve for me.
Rawwr said:
i did a clean install from cm9
i m having no problems like that
only one bug i m facing is
that
whenever i open stock gallery in any photo editor
the fone gets stuck
so i m using quick pic now
p.s.
if u touched any settings in performance menu
change it to default
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
before this i had cm10, then i tried flash stock rom then after i flashed again the sister, but the system ever is strange.
ok guys, ty for help me. I think i will reflash another rom, quarx version.....
brunocasado said:
Sorry guy, but not solve for me.
before this i had cm10, then i tried flash stock rom then after i flashed again the sister, but the system ever is strange.
ok guys, ty for help me. I think i will reflash another rom, quarx version.....
Click to expand...
Click to collapse
or as the dev said
come from stable 2.3 rom
why dont u install it over wiui rom ?
Sent from my MB526 using xda premium
Rawwr said:
or as the dev said
come from stable 2.3 rom
why dont u install it over wiui rom ?
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
AFAIK base rom doesn't do anything in terms of performance!
Sent from my MB526 using xda premium
hackergnome said:
AFAIK base rom doesn't do anything in terms of performance!
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
u can check over there
he did mentioned it
Rawwr said:
u can check over there
he did mentioned it
Click to expand...
Click to collapse
where? the base rom doesn't matter because you wipe everything anyways, and because of 2nd-boot you don't use Motorola kernel either!
Sent from my MB526 using xda premium
it's happened to me too. after official froyo i installed that rom and all the phone became sluggish, every app i tried freeze so i had to flash another rom
hackergnome said:
where? the base rom doesn't matter because you wipe everything anyways, and because of 2nd-boot you don't use Motorola kernel either!
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
go and read that post
Sent from my MB526 using xda premium
Some issues i faces in Sister Jelly Bean ROM
I am on the latest build... 3.1.7
I have come from a WiUi rom...
I am not able to access the USB storage of the device.
Whenever I play a song the music has a bad image in the notification bar ( attached pic)
Kindly help.
AkonDefy+ said:
I am on the latest build... 3.1.7
I have come from a WiUi rom...
I am not able to access the USB storage of the device.
Whenever I play a song the music has a bad image in the notification bar ( attached pic)
Kindly help.
Click to expand...
Click to collapse
Change the rom
Flash xperia d 4.2 with minimal installation
Sent from my MB526 using xda premium
I screwed up... i deleted /system and rebooted..
Now i am stuck in Moto Logo and RSD Lite is not detecting my phone as well.
I have the drivers installed and yet nothing happens.
What should i do?
Sorry for asking such n00b questions.
hay
I was facing the same problem when i first found this thread. Then i just went to performance option in settings and checked . I found that cpu governance was set to interactive. I changed that to ondemand and my problem got solved.
Hope this helps you.