Hi all
I have HTC HD2 EU , I installed WP7 and Android (Parandroid witch is a good one ) with dualboot ; thanks to all developpers .
Now I want to keep WP7 and switch to other android roms using 4ext correctly (or CWM) , like BOXMAX Rom installatio
How install
- must have 2 part ext4 ... use "MiniTool Partition Wizard Home Edition" for Re Partition:
1- First Partition "Fat 32" "Primary" (mmcblk0p1)
2- Second Partition "Primary" "Ext4" for system 1gb or 680mb (mmcblk0p2)
3- Third Partition "Primary" "Ext4" for data 1gb (mmcblk0p3)
- use this recovery and boot it from haret or Magldr SD ...
- before flash rom : wipe and format for sd-ext & sd-ext2 from recovery menu then :
- flash rom .
I found a lot of threads but for nand android .
Thanks
I tried some threads , get into 4ext recovery and off course I deleted WP7 , but when started Android ( BOXMAX NATIVE SD) it stuck on boot image for more than 40 min !
I installed WP7 again and Android ( parandroid ) .
keep waiting for help !
You have your answer right within your post, " use this recovery and boot it from haret or Magldr SD ..."
http://forum.xda-developers.com/showthread.php?t=1337663
Are you using the SD recovery from here https://app.box.com/s/jh2w3keom4x81p1qsw8f which is linked in those instructions?
It sounds like you are flashing 4ext recovery (CWM) and therefore wiping your wp7 in nand.
The sd recovery boots from magldr ad sd.
If you want to triple boot paranoid nativesd, boxmax directsd and wp7, you might want to increase the size of your first sd-ext partition to say 1.5 or 2Gb. So that you have;
fat32 (size=whatever is leftover) first (primary)
EXT4 size 1.5 or 2Gb second (primary)
EXT4 size 1Gb third (primary)
WP7 (whatever you choose) fourth (primary)
Thank you a lot for your answers and your time ,
Now I have dualboot WP7 in nand (4.5 G) and Parandroid Rom in the sd with very easy install .
I only want dualboot , keep WP7 in nand , than use 4ext recovery to wipe Parandroid Rom and flash BOXMAX Rom ( as said in instructions here ) in sd , because when I tried partition with 4ext recovery when flashing BOXMAX Rom I wiped my WP7 from nand :silly: .
How to flash the BOXMAX rom using 4ext recovery without deleting nand ,step by step plz if possible ?
Related
I WANTS TO INSTALL NDT SENSE 3.0PYRAMID ROM....BUT IN REQUIREMENTS A PARTITION IS REQD .....
PARTITION VALUES ARE .... 5-160-5 Partition
I DNT KNOW HOW TO CREATE THIS PARTITION ON MY T-MOUS HD2...
CAN ANYONE HELP ME IN CREATING THIS PARTITION...
THNXX
first you should have an sd-ext partition in your sd in order to run this rom with indicated nand partition.
i assume you have mgldr:download and install this tool
http://forum.xda-developers.com/showthread.php?t=1090783
connect phone to pc-then in mgldr go to usb flasher-see usb flasher....usb-go to installed tool-choose mgldr partition(at left top)-choose 'custom' as partition size-write 5 for cache size-click repartition (at left bottom)-in coming window write 160
after installation is completed press install your xrom.zip from sd.
thnxx......
Hi guys,
I've been searching for an answer in the forum but can't seem to find one here. Hope that you all can help me out with this.
I've flashed to Android from WM6.5 and it will hang at the bootscreen HTC logo. It won't boot into Android. This happens to both SD and NAND versions. This all started a few months ago when I flashed to WP7 and flashed back to WM6.5 and didn't have time to play with Android. Tried various versions of Android and it still hang at the bootscreen HTC logo.
I'm using:
Radio: 2.15.50.14
HSPL: 2.08
Latest MAGLDR
Latest DAT
Can someone please help/advise me? Thanks in advance.
do you make proper nand (internal memory) partition for the roms (5-18-5,5-400-5 etc.)?
if you have leo 512,do you have sd-ext partition?
you should an external partition on your sd
first partition the bigger would be fat32
and the second partition (1GB) ext4 or ext3
then try to run the android again....
Hi guys,
Thanks so much for your help. I'm not sure if I'm doing things correctly. So I've re-read the tutorials again on partitioning my HD2. I've the 512MB version.
The Android Rom that I want to flash to is this NDT SENSE 3.0 PYRAMID SE V4.0[APP2SD+][Raf 2.0 OC] http://forum.xda-developers.com/showthread.php?t=1185087
Recomended Recovery is 5-160-5
1. I used the HD2 NAND Toolkit to partition my HD2 with 160MB as Partition System with 5MB Cache.
2. I formated my 8GB Transcend microSD and partitioned it 1GB ext2 (primary) and 2GB ext3 (logical) and 5GB FAT32 (logical)
3. I flashed it using DFT_LEO_MAGLDR113_DAF
4. Flash Recovery with edit "flash.cfg" with the recommended settings.
5. Then I Wipe full data and Advance - Dalvik cache on Recovery Menu is recommand
Funny thing... When I tried to do this, it says that there's no SD card in it. Does this mean that my microSD is not supported or do I need a smaller capacity microSD?
I hope you guys can help me with this noob question. Thanks again.
2nd step is wrong.do it that way:2 gb ext3 or ext4(primary)-the remaining part fat32(primary). dont use logical.dont make ext partitions more than one.g
after you have made nand partition with toolkit you have nothing to do with daf (this will repeat the same procedure as toolkit does)
first prepare your sd,put it in phone then partition nand.
now go in mgldr-ad recovery-wipe data factory reset.
lastly flash your rom and reboot.
Hey mutil. Thanks a lot!!!! HD2 running on Android now!!! WOooHOOooo
Hey,
I need help with Imilka Gingerbread 0.8, as I don't have 10 posts yet I can't reply in that thread so I have to start a new thread (which is actually .. pretty odd).
I have an EU HTC HD2 and I'm trying to install NAND + CWR, it is my fourth ROM Im using, first NAND, all SDbased androids did work immediatly
Flashed original HTC HD2 ROM
Reformatted SD card FAT32
Used Task 29
Installed radio 2.15.50.14
Installed HSPL 2.08
Installed MAGLDR1.13
Flashed it according to advice 5/170/44 layout
Did every wipe at AD Recovery
Partitioned my 32gb SDcard 1024mb with 0 swap
Installed zip from SDcard
Rebooted
Waiting for about 2 hours at the black screen with green HTC, post says: First boot can take up to 10-20 minutes.
EU users need 5/180/5 CWR system partition and ext2/3/4 partition on sdcard.
TMOUS users need 5/360/5 or more CWR system partition.
ext2/3/4 partition will be made @ AD Recovery partition SD card ?
If not, how can I make this partition, without linux and stuff. Just windows 7.
Or am I doing it in the wrong order?
Just did it all over again
This time with 5/180/5 layout and made ext3 partition using easeus on windows using instead of clockwork thingy.
nope, still doesn't go past the black screen + green HTC
booting for an hour now, nothing
Think I found the problem.
Updated AD recovery to 5.0.2.3 orsomething there was an option show log
and it said creation of EXT2 partition was aborted, so now I put the SD in my card reader and manually formated it ext2. retrying now
Nope, nothing
I can manually mount everything but SD-EXT
show log::
mount: mounting /dev/block/mmcblk0p2 on /sd-ext
failed: invalid argument
Hello, I'm noob about NativeNand, and i've a difficulty...
Config : HD2 - with CWM v5.0.2.6
µSD : 1 partition ext4 2go + 1 partition FAT32 13go
I installed this Rom :http://forum.xda-developers.com/showthread.php?t=1930240 without difficulty.
To reboot, I don"t know how boot on EXT4 partition... I have no other rom (NAND, WM, ...) on tel.
I search on the forum, but the answers are very complex to found or translate (I'M french)
Thanks for your help or link!
Jake
(sorry for the mistakes)
magldr menu
10 services
1 bootsettings
3 ad sd dir
select the nativeSD folder
back to magldr menu - boot ad sd
to make it always boot from nativesd choose
10 services
1 bootsettings
1 boot source
1 android from sd
Course, you know all this from reading the nativeSD thread, right?
All it's ok,
I used CWM recovery to install the NativeSD rom,
and MAGLDR to boot on ext4 partition : Good:
Thanks for the detail of the manipulation!
jake_42 said:
All it's ok,
I used CWM recovery to install the NativeSD rom,
and MAGLDR to boot on ext4 partition : Good:
Thanks for the detail of the manipulation!
Click to expand...
Click to collapse
Press his thanks button.
dxdy, i hv followed ur video tutorial for dual boot....wp7 works gud but whenever trying to boot android kitkat, i got error kernal fail to open...i m using mac4a rom by maxs....wil u plz help me?
kalpeshchavan said:
dxdy, i hv followed ur video tutorial for dual boot....wp7 works gud but whenever trying to boot android kitkat, i got error kernal fail to open...i m using mac4a rom by maxs....wil u plz help me?
Click to expand...
Click to collapse
I think you will need to create an Ext4 partition of at least 1Gb on your Fat32 partition, either with minitool partition wizard or use Extended TWRP as your recovery.
my tut is too old from times when android run from FAT32 sdcard...
for nand version procedure is different and i not make tut for that
i sold my HD2 two years ago and since then i cant test this options....
THIS IS ONLY FROM MY MEMORY (maybe i write something wrong or forgot some steps)
for NAND ROM installation you need 4EXTRecovery for SDcard... not sure for complete procedure but first make WP7 partition (look my old tut) and rest left for android...
put 4EXTRecovery on SDcard (for example in A folder)
boot to magldr
10.Services, 1.BootSettings, 3.AD SD Dir, select "A"
10.Services, 1.BootSettings, 1.Boot source, 1. Android from SD
2.Boot AD SD
wait to load 4EXTRecovery
advanced - Partition SD card
select minimum 512 mb, this is EXT4 partition for system, rest of memory if you want is FAT32
2nd sd-ext skip
swap skip
Yes - I'm sure
EXT4
wait format to complete
red button to back to main menu when format complete...
now is ready to install ROM...
togle usb storage (in 4EXTRecovery)
copy ROM in zip file to SDcard
Next, Next, Agree, Next - Install on NativeSD/semi NativSD - Format (yes)
RMNET Connection
select options you want, after restart when boot to magldr just select which system you want boot
10.Services, 1.BootSettings,
thanks for this....dual boot hd2 finaly succeded
ur video tut is still useful....thanks alot