Database Users

NativeSD simple tutorial

All tools can be download by these sites:
http://forum.xda-developers.com/showthread.php?t=1869673
http://forum.xda-developers.com/showpost.php?p=31256707&postcount=967
LEO is still the king!
Thanks a lot, securecrt and Xylograph!
I What is "NativeSD"
As the name shows, the SD card now do what native storage do. In other words, we can leave the nand and done almost everthing with one SD card!
II Benifits of NativeSD
1. Common benifits
Don't need to worry about bad blocks in nand, no need to adjust system size。
2. On premise of large storage of SD card
The partition used as native storage can be very large duo to your SD card(<32GB).
Muilt ROMs(wm,wp,androids)
3. On premise of fast SD card
Faster Read/Write speed than NAND ROMs,better。
III Install ROM
1. Prepare
*1）Android rom that support NativeSD, cellphone(LEO,with SD card, battery>50%), computer,cable,4EXT recovery
*2)Backup all your data on SD card(if you want to keep it).
2.magldr users
1)This is the case that you download the SD version of 4EXT recovery.
copy the unziped files to you fold "a" in your SD card.("a" is just a sign,can be any name,just make sure the folder is in the root directory of SD card)Notice: please make sure these files are in the root directory of "a",not any sub folder:clcad.exe,haret.exe,initrd.gz,startup.txt,zImage
2）This is the case that you download and already install the nand version of 4EXT recovery.
2.1Boot to recovery
if 1)
2.1.2 hold the red button while boot, when the menu of magldr shows, choose
10.Services，then 1.BootSettings，and then 3.AD SD Dir，loacate to your folder "a"，press green button to confirm.
2.1.2when back to magldr menu, choose 10.Services，then 1.BootSettings，then 1.Boot source，and then 1. Android from SD, press green button to confirm.again when back to magldr menu，choose 2.Boot AD SD。
if 2）
2.1.3 hold the red button while boot, when the menu of magldr shows, choose 8.AD Recovery
2.2 Now in recovery，Partition SD Card
2.2.1 choose advanced
2.2.2 choose Partition SD Card ->
2.2.3 choose Remove all partions and start from starth
2.2.4 choose the size of EXT partition as you want，all your system and apps will be install to this partition，so if you want more systems ,choose a big one.（must large than 512M）
2.2.5 choose the size of swap partion，I recommend 0(choose skipe).
2.2.6 choose Yes - I'm sure，waitting for the progress to finish。
2.2.7 when back to recovery main page
if 1）
choose power menu，then choose Reboot ，and hold the red button while boot, when the menu of magldr shows，connect the phone to your computer，choose 4.USB MassStg，repeat 1),2.1.1,2.2.2 and 2.3.7.2
if 2）
2.2.7.2connect the phone to your computer，choose toogle usb storage，copy you download rom to your SD card，safe eject，pull of the cable，choose unmount on the phone。
2.3 Install rom
2.3.1 choose install from sdcard at the main page of recovery
2.3.2 choose zip from sdcard
2.3.3 choose your rom
2.3.4 choose Yes - install ...（... is the name of rom）
2.3.5 wait for the install page to show，tap Next
2.3.6 tap Install to SD-EXT，then tap Next
2.3.7 tap RMNET Connection，and then tap Next
2.3.8 tap Next and wait for the install finish，when done tap Next
2.3.9 make sure Reboot is choosed and tap Finish，and hold the red button while boot ,when magldr shows, follow 2.1.1，but now "a" is response of folder "NATIVESD"。when back to magldr main menu，choose 2.Boot AD SD。
Now you can enter your new rom.
2.4 Install another rom
2.4.1 enter recovery
if 1）follow 2.1.1，when magldr menu shows，choose 2.Boot AD SD。
if 2）please follow 2.1.3
follow 2.3
2.5 Reboot to other rom
Enter one android rom，install NativeADMultiBoot.apk,when done,run the app，choose the rom your want to reboot to（pleasre allow root），then press reboot。
3.clk users（Three rom is avaliable，1 nand + 2 NativeSD）
3.1 install clk
3.1.1 unzip the file，put the file LEOIMG.nbh into the root directory of your SD card。then turn off the phone.
3.1.2 hold the volume mines and red button，when blue" loading..." shows release the buttons，wait a moment, when blue text shows inthe middle of the screen,press red button to flash clk，when done press the reset button or pull off your battery and reboot the phone。while reboot, hold back button to enter Bootloader。
please google how to use clk.
optional：change recovery to 4EXTNAND
**unzipe 4EXTNAND version's recovery，find recovery_leo.img，incase thst you put it in folder 'b"（please notice that "b"is just a sign here,you need to use a full directory such as d:/b）
**on Bootloader main menu choose INFO，then choose ENABLE USB DETECTION
**resize partion recovery to 7m，connect to computer, make sure the "usb" is show at the bottom of the phone，run adb and excute：fastboot flash recovery b/recovery_leo.img
enter recovery and partion SD card，if use 4EXT version recovery，please follow 2.2.1~2.2.6；or please the introduction of the recovery you used（not offer here）。
3.2 flash nand rom
please google.
3.3 flash sboot EXT rom
3.3.1 enter bootloader and choose settings then add sboot，wait the phone back to bootloader main menu
3.3.2when back to main menu, choose RECOVERY to enter recovery
please follow 2.3.1~2.3.6
3.3.3 make sure RMNET Connectionis not choosed，then tap Next
3.3.4 tap Nextand wait for the intall done，when finish tap Next
3.3.5 make sure Reboot is unchecked and tap Finish
3.3.6 follow 2.3.1，2.3.2，choose flash_sboot_v2.zip，and follow 2.3.4
when flash done, reboot to BootLoader and choose ANDROID SBOOT to enter the new rom。
3.4 flash tboot rom（thanks bojanbl）
follow 3.3，just replace sboot with tboot。
3.5 Reboot to other rom
hold the back button while boot to enter,bootloader，when the menu shows,choose a rom to boot。
4.a version of magldr that can be flash vir SD card，just flash it like you flash clk，if intereted,you can have a try.
View attachment SD_flash_magldr.zip

palce holder

Thank your for this How-to!

how about wp7 user?

dalfshiro said:
how about wp7 user?
Click to expand...
Click to collapse
give this a try Triple Boot WP7+SD+NativeSD EXT4 @ 1 SD with pictures

mengfei said:
give this a try Triple Boot WP7+SD+NativeSD EXT4 @ 1 SD with pictures
Click to expand...
Click to collapse
helpfull..thanks maaannn..:laugh::good::good::good::good::victory:

Nice tutorial...:good:
I think one thing is missing though...
How to uninstall one of the nativesd rom.
Regards
Rui

Thank you very much!!

Can't boot
I made EXT4 partition, and instaled Magldr, and than instaled WM ROM, and copied EXT4SD recovery (first one on list), extract, and use folder '4EXTRecovery' and paste to SD card root, and now, what to do(?) how to get in recovery mod, or, how to get to Magldr menu? Please help

NativeSD without flashing MAGLDR or cLK?
my background:
I use Android ICS and MIUI on Leo HTC HD2, booting from SD-Card using haret.exe in WM6.5.
I can't flash my device with MAGLDR or cLK, because it's leased and I have to return it back in some time with the original WM6.5.
Now my question:
Can I use native SD instead of "standart SD", because I hope it's faster, wihthout flashing any custom boot loader and destroing the original OS?
If I got it right, flashing a MAGLDR or cLK erases the complete device (except of HSPL and radio), right?
The only thing I dared to do before, was to flash the HSPL and a Radio Update, because this didn't touched the WM6.5.
I came so far to create a EXT4 and a FAT32 partitions on my SD-Card (32MB, Class 10) with "MiniTool Partition Wizard Home Edition 7.6". Then I downloaded the 4EXT Recovery and booted it from WM6.5 with haret.exe, but now I'm stucked.
All I got is, the 4EXT Recovery do the same job as this MiniTool. It makes partitions on my SD-Card.
I planed to install NexusHD2-JellyBean-4.1.2-CM10 V1.1 ROM as NativeSD, but I'm afraid I can't do this without flashing the MAGLDR or cLK and erasing the WM6.5
Any help?

thanks for the guide

leschakk said:
my background:
I use Android ICS and MIUI on Leo HTC HD2, booting from SD-Card using haret.exe in WM6.5.
I can't flash my device with MAGLDR or cLK, because it's leased and I have to return it back in some time with the original WM6.5.
Now my question:
Can I use native SD instead of "standart SD", because I hope it's faster, wihthout flashing any custom boot loader and destroing the original OS?
If I got it right, flashing a MAGLDR or cLK erases the complete device (except of HSPL and radio), right?
The only thing I dared to do before, was to flash the HSPL and a Radio Update, because this didn't touched the WM6.5.
I came so far to create a EXT4 and a FAT32 partitions on my SD-Card (32MB, Class 10) with "MiniTool Partition Wizard Home Edition 7.6". Then I downloaded the 4EXT Recovery and booted it from WM6.5 with haret.exe, but now I'm stucked.
All I got is, the 4EXT Recovery do the same job as this MiniTool. It makes partitions on my SD-Card.
I planed to install NexusHD2-JellyBean-4.1.2-CM10 V1.1 ROM as NativeSD, but I'm afraid I can't do this without flashing the MAGLDR or cLK and erasing the WM6.5
Any help?
Click to expand...
Click to collapse
OK, I helped myself. Thanks!
Partitioned the SD-Card with 4EXT-Recovery again. Created 2 EXT4 partitions 2 GB each, the rest (25 GB) goes for the FAT32 partition.
Then installed the "NexusHD2-JellyBean-4.1.2-CM10 V1.1 ROM".ZIP (was an AROMA installer) from FAT32 partition and it worked!
Altough it's all very slow and the second EXT4 partition is unused. don't know why the recovery aked my to create one.

"I What is "NativeSD"
As the name shows, the SD card now do what native storage do. In other words, we can leave the nand and done almost everthing with one SD card!"
I'm REALLY new here so this might be a naive question but does that mean we'll be able to run WM 6.5 and WP 7 in a dual boot configuration now? From what I've heard they can only be installed on the HD2's NAND leaving room for either or, but since you say that NativeSD can do whatever the native storage does I thought it might be possible to run them direct off the SD?

Thank you for this guide.

[Q] Slow / Lagging TBD Nandroid

I have HTC HD2 TMoUS and this is my 3rd ROM.. want to get a good Nandroid with Sense
Hspl : 2.08, radio (stock : 2.15.50.14)
------------- Installation Method
Followed all the Steps using HD2ToolKit v4.3 by KsuBedi
(Task 29, Installed Magldr, Repartition to 250Mb, cache 45Mb )
Hspl : 2.08 0x50 cottula, radio (stock : 2.15.50.14) ---- did not touch these
then using CWM touch v8 beta recovery, Flashed : 1.05.401.4 Sundawg TBD v28
to NAND
ROM from : http://forum.xda-developers.com/showthread.php?t=1769081
Cleared the Caches/Dalvik/
updated to Marks' Kernel 2.3
Cleared the Caches/Dalvik/
fix permissions
And booted into
but the Animations are not Smooth at all and the Apps take a while to load up (basically its Slow/Lags)
Quests:
1) Less Memory 512Mb it should say 1024Mb .. yes/no ?
my SDCard is OLD : but using Win7 i can get transfer speeds of 4-4.5 Mb/s to a Fat32 partition
2) No Music/Videos : No SD Card !!
3) howto Speed up ??( how can i use A2sd if it says theres no SD Card)
Please Help
Note : I like this Rom (Thanks TBD) could someone Help
I tried to post this in the Dev Thread but was denied (noob)
-------------------------------------
INFO
-----
Storage :
SD Card > unavailable
Internal Storage > Available Space = 4GB
My SdCard is Formated as such
Fat32 10Gb --> ext4 4GB --> Linux Swap 300Mb --> Unused 8Mb
-----
Phone Name : HTC OneX with Beats Audio
Model Number : HTC HD2
----- Hardware Info
Processor 1GHz with TBD Speed Now
Memory : 512Mb
----- Software Info
Android : 2.3.5
HTC SENSE : 3.5
software number
1.05.401.4 Sundawg TBD v28
Kernel version : 2.6.35.14-marc1706s_desire_0.2.3
BaseBand : 15.42.50.11U_2.15.50.14
Build Number : 1.05.401.4CL185058 release-keys
-------
Task Manager with no Apps running : Total Memery 403MB / Used 287 / Free 116Mb

WotWhere said:
I have HTC HD2 TMoUS and this is my 3rd ROM.. want to get a good Nandroid with Sense
Hspl : 2.08, radio (stock : 2.15.50.14)
------------- Installation Method
Followed all the Steps using HD2ToolKit v4.3 by KsuBedi
(Task 29, Installed Magldr, Repartition to 250Mb, cache 45Mb )
Hspl : 2.08 0x50 cottula, radio (stock : 2.15.50.14) ---- did not touch these
then using CWM touch v8 beta recovery, Flashed : 1.05.401.4 Sundawg TBD v28
to NAND
ROM from : http://forum.xda-developers.com/showthread.php?t=1769081
Cleared the Caches/Dalvik/
updated to Marks' Kernel 2.3
Cleared the Caches/Dalvik/
fix permissions
And booted into
but the Animations are not Smooth at all and the Apps take a while to load up (basically its Slow/Lags)
Quests:
1) Less Memory 512Mb it should say 1024Mb .. yes/no ?
my SDCard is OLD : but using Win7 i can get transfer speeds of 4-4.5 Mb/s to a Fat32 partition
2) No Music/Videos : No SD Card !!
3) howto Speed up ??( how can i use A2sd if it says theres no SD Card)
Please Help
Note : I like this Rom (Thanks TBD) could someone Help
I tried to post this in the Dev Thread but was denied (noob)
-------------------------------------
INFO
-----
Storage :
SD Card > unavailable
Internal Storage > Available Space = 4GB
My SdCard is Formated as such
Fat32 10Gb --> ext4 4GB --> Linux Swap 300Mb --> Unused 8Mb
-----
Phone Name : HTC OneX with Beats Audio
Model Number : HTC HD2
----- Hardware Info
Processor 1GHz with TBD Speed Now
Memory : 512Mb
----- Software Info
Android : 2.3.5
HTC SENSE : 3.5
software number
1.05.401.4 Sundawg TBD v28
Kernel version : 2.6.35.14-marc1706s_desire_0.2.3
BaseBand : 15.42.50.11U_2.15.50.14
Build Number : 1.05.401.4CL185058 release-keys
-------
Task Manager with no Apps running : Total Memery 403MB / Used 287 / Free 116Mb
Click to expand...
Click to collapse
Firstly stop blaming about you were denied to report in my thread ,i haven't seen your appearance in my thread,now coming to the point
the partition size for tmous is 250 & 7 cache & not 45, Read my third post,secondly have you seen me mention enable swap in my build?in my rom don't enable swap,
now about partitioning your sd if you have good SD class 6 & above make ext 4 as 2GB or above,if not keep it below 2GB,I repeat don't enable swap,
& Touchb recovery works best on CLK,while flashing recovery ain't you read CLK 1.5.1.1? how did you flash it to magldr,anyways my question you want magldr or clk?
if magldr
task29 / flash magldr/ enter usb flasher mode/repartion recovery in hd2toolkit with 250 /7 cache,
boot into magldr,do a AD hardrest
now enter recovery/enter mount storage manually wipe data,system,cache,sd ext
now flash your rom & marc 2.3 do a wipe cache/dalvik & fix permission
let phone settle for 10 minutes on first boot,turn off the phone restart , that's about it
Always Read the thread correctly before posting issues,or do a proper search,good luck
Peace

sundawg said:
Firstly stop blaming about you were denied to report in my thread ,i haven't seen your appearance in my thread,now coming to the point
the partition size for tmous is 250 & 7 cache & not 45, Read my third post,secondly have you seen me mention enable swap in my build?in my rom don't enable swap,
now about partitioning your sd if you have good SD class 6 & above make ext 4 as 2GB or above,if not keep it below 2GB,I repeat don't enable swap,
& Touchb recovery works best on CLK,while flashing recovery ain't you read CLK 1.5.1.1? how did you flash it to magldr,anyways my question you want magldr or clk?
if magldr
task29 / flash magldr/ enter usb flasher mode/repartion recovery in hd2toolkit with 250 /7 cache,
boot into magldr,do a AD hardrest
now enter recovery/enter mount storage manually wipe data,system,cache,sd ext
now flash your rom & marc 2.3 do a wipe cache/dalvik & fix permission
let phone settle for 10 minutes on first boot,turn off the phone restart , that's about it
Always Read the thread correctly before posting issues,or do a proper search,good luck
Peace
Click to expand...
Click to collapse
:good:Thanks Heaps for the Info, Mr.Dawg
Firstly stop blaming about you were denied to report in my thread
Click to expand...
Click to collapse
Well When i tried i got a message ( you have to have atleast ten posts before posting here )
I tried to post to your thread, I get redirected to http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=28679437
the partition size for tmous is 250 & 7 cache
Click to expand...
Click to collapse
yes.. my mistake.. was tired and forgot and gave wrong info...
cache is actually 7Mb.. i remember changing it before Repartitioning
I have read about the clk.. its open source as compared to Magldr
will look into it further
enabling Swap.. as mentioned this is my 3rd ROM, I followed some other ROMs proc's and left the SDCard alone..
& Touchb recovery works best on CLK,
Click to expand...
Click to collapse
It seems to work just fine in Magldr1.13
how did you flash it to magldr,anyways
Click to expand...
Click to collapse
I use HD2ToolKit 4.3.1 it Flashes the touchrecovery automatically when repartitioning
(I saw that you have provided a link to a recovery zip file too.. but didint use that)
details at
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675
Step 5
In Mgldr : i only got two options while partitioning > system / cache (i chose 250 / 7)
In your post you have mentioned clk procedure only...
So, i reckon the Magldr procedure has 3 diff:
1. your partitions are not completely implemented
MAGLRD Recovery size for Tmobile:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery_leo.img
boot yboot|ro 7M
system ya 250M
cache ya 7M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
Only System + Cache were
2.
boot into magldr,do a AD hardrest
Click to expand...
Click to collapse
Didnt see this Step in your procedure...
is it coz this is being redone?
3. the Swap partition and Slow SD Card (maybe a Class 4 as i bought it 3-4 yrs back)
can i just resize the ext4 partition by deleting the Swap and merging, using Minitools partition magic?
Or
do i have to start from Task29 All over again?
Anyways.. repartitioning has to be done.. will start with that:fingers-crossed:
Thanks a Heap (@SunDawg):good:

It Works
Hi,
Posting this for Noobs like myself:silly:
Repartitioning the SDCard (to remove swap) did not Help
made the ext partition less than 2Gb as guided by Sundawg
Started with Task 29.. followed the procedures
HD2ToolKit -> data -> ref -> flash.cfg
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 250M
cache ya 7M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
has the above setings by default.. assuming this file is being used while flashing It does match the setings recommended for Sundawg's ROM
so, it was quite simple.. and i made it complicated
HD2Toolkit made Flashing this ROM a breaze
@KsuBedi :good:
3 Steps :
1) Task29
2) Install Magldr
3) Repartition
The Nand is ready for Flashing
now follow http://forum.xda-developers.com/showthread.php?t=1769081
go into CWM (which is Auto installed when Repartitioned) by choosing Magldr Menu -> 8. Ad Recovery
now folllow procedures from post#3-> Step 5
It works Great.. installed a couple of games too..
@SunDawg:good:
note: Guide with piktures : http://forum.xda-developers.com/showthread.php?p=25781675#post25781675

[Q] keep WP7 and switch between android Roms

Hi all
I have HTC HD2 EU , I installed WP7 and Android (Parandroid witch is a good one ) with dualboot ; thanks to all developpers .
Now I want to keep WP7 and switch to other android roms using 4ext correctly (or CWM) , like BOXMAX Rom installatio
How install
- must have 2 part ext4 ... use "MiniTool Partition Wizard Home Edition" for Re Partition:
1- First Partition "Fat 32" "Primary" (mmcblk0p1)
2- Second Partition "Primary" "Ext4" for system 1gb or 680mb (mmcblk0p2)
3- Third Partition "Primary" "Ext4" for data 1gb (mmcblk0p3)
- use this recovery and boot it from haret or Magldr SD ...
- before flash rom : wipe and format for sd-ext & sd-ext2 from recovery menu then :
- flash rom .
I found a lot of threads but for nand android .
Thanks

I tried some threads , get into 4ext recovery and off course I deleted WP7 , but when started Android ( BOXMAX NATIVE SD) it stuck on boot image for more than 40 min !
I installed WP7 again and Android ( parandroid ) .
keep waiting for help !

You have your answer right within your post, " use this recovery and boot it from haret or Magldr SD ..."
http://forum.xda-developers.com/showthread.php?t=1337663

Are you using the SD recovery from here https://app.box.com/s/jh2w3keom4x81p1qsw8f which is linked in those instructions?
It sounds like you are flashing 4ext recovery (CWM) and therefore wiping your wp7 in nand.
The sd recovery boots from magldr ad sd.
If you want to triple boot paranoid nativesd, boxmax directsd and wp7, you might want to increase the size of your first sd-ext partition to say 1.5 or 2Gb. So that you have;
fat32 (size=whatever is leftover) first (primary)
EXT4 size 1.5 or 2Gb second (primary)
EXT4 size 1Gb third (primary)
WP7 (whatever you choose) fourth (primary)

Thank you a lot for your answers and your time ,
Now I have dualboot WP7 in nand (4.5 G) and Parandroid Rom in the sd with very easy install .
I only want dualboot , keep WP7 in nand , than use 4ext recovery to wipe Parandroid Rom and flash BOXMAX Rom ( as said in instructions here ) in sd , because when I tried partition with 4ext recovery when flashing BOXMAX Rom I wiped my WP7 from nand :silly: .
How to flash the BOXMAX rom using 4ext recovery without deleting nand ,step by step plz if possible ?

[Q] Need help on installing chautruongthinh 4.4.2 kitkat to htc hd2

i'm having lots of problems installing 4.4.2 to my Leo
- i have done everything right, magldr v1.13, cwm v3.0.0.5
- if i partition my sd card in cwm it repartitions it to ext3 successfully but when install rom it stuck on htc green logo for all of the available option, NAND and dataonext
- i tried to repartition my sd in pc with ext4 and fat32 but cwm didn't recognize my card
so do i need some extra things or did i do sth wrong??? i flash cwm through usb flasher...
any help will be greatly appreciated

vutranloc said:
i'm having lots of problems installing 4.4.2 to my Leo
- i have done everything right, magldr v1.13, cwm v3.0.0.5
- if i partition my sd card in cwm it repartitions it to ext3 successfully but when install rom it stuck on htc green logo for all of the available option, NAND and dataonext
- i tried to repartition my sd in pc with ext4 and fat32 but cwm didn't recognize my card
so do i need some extra things or did i do sth wrong??? i flash cwm through usb flasher...
any help will be greatly appreciated
Click to expand...
Click to collapse
- You should use 4EXT Recovery
- You must repatition to EXT4
- And wipe all then you install my rom
- If you have any question, you can ask me in my Q&A topics!! Thanks

vutranloc said:
- i have done everything right, magldr v1.13, cwm v3.0.0.5
Click to expand...
Click to collapse
CWM v3.0.0.5? Is not too old? Use CMW v8 Touch.
vutranloc said:
- if i partition my sd card in cwm it repartitions it to ext3 successfully but when install rom it stuck on htc green logo for all of the available option, NAND and dataonext
Click to expand...
Click to collapse
Increase of 50MB the Partition size on Nand. If you did the right partition size like Requested it's do not matter, you can have bad blocks.
vutranloc said:
- i tried to repartition my sd in pc with ext4 and fat32 but cwm didn't recognize my card
Click to expand...
Click to collapse
Use Mini Tool Partition Home Free, format all card in FAT32 first then make a EXT4 partition.
vutranloc said:
so do i need some extra things or did i do sth wrong??? i flash cwm through usb flasher...
any help will be greatly appreciated
Click to expand...
Click to collapse
Flashing CWM through USB flasher is the best choice, do not use Toolkit. Just edit flash.cfg file to increase the partition size.

help me for dual boot....kernal fail to open

dxdy, i hv followed ur video tutorial for dual boot....wp7 works gud but whenever trying to boot android kitkat, i got error kernal fail to open...i m using mac4a rom by maxs....wil u plz help me?

kalpeshchavan said:
dxdy, i hv followed ur video tutorial for dual boot....wp7 works gud but whenever trying to boot android kitkat, i got error kernal fail to open...i m using mac4a rom by maxs....wil u plz help me?
Click to expand...
Click to collapse
I think you will need to create an Ext4 partition of at least 1Gb on your Fat32 partition, either with minitool partition wizard or use Extended TWRP as your recovery.

my tut is too old from times when android run from FAT32 sdcard...
for nand version procedure is different and i not make tut for that
i sold my HD2 two years ago and since then i cant test this options....
THIS IS ONLY FROM MY MEMORY (maybe i write something wrong or forgot some steps)
for NAND ROM installation you need 4EXTRecovery for SDcard... not sure for complete procedure but first make WP7 partition (look my old tut) and rest left for android...
put 4EXTRecovery on SDcard (for example in A folder)
boot to magldr
10.Services, 1.BootSettings, 3.AD SD Dir, select "A"
10.Services, 1.BootSettings, 1.Boot source, 1. Android from SD
2.Boot AD SD
wait to load 4EXTRecovery
advanced - Partition SD card
select minimum 512 mb, this is EXT4 partition for system, rest of memory if you want is FAT32
2nd sd-ext skip
swap skip
Yes - I'm sure
EXT4
wait format to complete
red button to back to main menu when format complete...
now is ready to install ROM...
togle usb storage (in 4EXTRecovery)
copy ROM in zip file to SDcard
Next, Next, Agree, Next - Install on NativeSD/semi NativSD - Format (yes)
RMNET Connection
select options you want, after restart when boot to magldr just select which system you want boot
10.Services, 1.BootSettings,

thanks for this....dual boot hd2 finaly succeded

ur video tut is still useful....thanks alot