Database Users

Two android builds at the same time?

Is it possible to have two android builds installed on my HD2 at the same time.
Currently I have a CWM NAND Desire HD isntalled. I would like to experience an SD GB build, without affecting the allready installed build (i.e. remove and reinstall again).
Is there a possibility for such two builds to co-exist. When booting to choose (MAGDLR 1.13) which one should run? without anyone affecting the other?
Please advice.
Thanks

i don't think that exit..
SD GB u mean SD card build? if SD boot, they require WM base for all this working properly..

kentwei said:
i don't think that exit..
SD GB u mean SD card build? if SD boot, they require WM base for all this working properly..
Click to expand...
Click to collapse
No, they can work fine side-by-side. You don't need Windows Mobile anymore to boot into the SDcard versions of ROMs. You can do so by holding down the power button as you boot and you will see the DFT menu. Select AD SD and you'll boot into the SD version of your ROM, if you select AD NAND, then you will boot into the NAND version of the ROM. I've personally run MDJ Gingerbread on the NAND and dandiest's DesireZ ROMs on the SDcard at the same time, booting between them to play around.

Thanks.
How do I install The SD version? is it via "AD SD" where I install a zip file from root? or do I have to put the files in the "scdcard\android" directory?
Is there a procedure like HAARET?
Please advice

SD is the easiest way, but with cwm and a 400mb partition you can setup either Tom, do a nandroid backup on them and swap back and forth. The issue is gb Rome generally need a 150mb partition so your wasting space on the gb rom.
Try it, have fun.
zolom said:
Thanks.
How do I install The SD version? is it via "AD SD" where I install a zip file from root? or do I have to put the files in the "scdcard\android" directory?
Is there a procedure like HAARET?
Please advice
Click to expand...
Click to collapse
HyperDroid CM7 1.0.1

zolom said:
Thanks.
How do I install The SD version? is it via "AD SD" where I install a zip file from root? or do I have to put the files in the "scdcard\android" directory?
Is there a procedure like HAARET?
Please advice
Click to expand...
Click to collapse
First, download the SD ROM that you want, follow the respective instructions on how to set it up. Every ROM has a different folder that you're supposed to create on the sdcard. Next, in your Magdlr menu (hold down power as you're turning the phone on), select the SD Directory and point to the directory that you created for the SD ROM. Finally, just select which one you want to boot into via the same Magdlr menu.

Thanks
Found the answer
FOR MAGDLR BOOT:
Store the ROM in a directory "XXX" under sdcard (choose android or another name)
Boot MAGDLR
Select "SERVICES"
Select "BOOT SETTINGS"
Select "AD SD Dir"
Select the "XXX" folder
Select "BOOT AD SD" and boot

Ok, I give up, NONE OF THE METHODS WORK

I am now sitting in front of my HD2 for more than three hours and have watched several tutorials on how to get any android rom onto my HD2.
With MAGLDR I get the "123456 GO GO GO" - and then nothing happens
And before that there is a NAND KERNEL OPEN FAILED
Trying to get to the USB Mass Storage mode, Windows 7 (64) does not recognize the SD card. However, this shows then up in the USB eject menu (Eject MAGLDR)
With cLK I get some "flash_read_image: failed (511 errors) ERROR: Cannot read recovery_header" error
On my SD card, there is a ZIP file as downloaded "NexusHD2-IceCreamSandwich_Beta10.zip", formatted as FAT32.
Before, I flashed a stock WinMo 6.5, installed HSPL and a matching Radio one more time...
So no method works for me. Please help me.

1 - the mass storage in magldr doesn't work (for large files at least)
2 - you need to flash cwm with the correct partition layout after flashing magldr(or clk) and before flashing the rom.

Zuzler said:
I am now sitting in front of my HD2 for more than three hours and have watched several tutorials on how to get any android rom onto my HD2.
With MAGLDR I get the "123456 GO GO GO" - and then nothing happens
And before that there is a NAND KERNEL OPEN FAILED
Trying to get to the USB Mass Storage mode, Windows 7 (64) does not recognize the SD card. However, this shows then up in the USB eject menu (Eject MAGLDR)
With cLK I get some "flash_read_image: failed (511 errors) ERROR: Cannot read recovery_header" error
On my SD card, there is a ZIP file as downloaded "NexusHD2-IceCreamSandwich_Beta10.zip", formatted as FAT32.
Before, I flashed a stock WinMo 6.5, installed HSPL and a matching Radio one more time...
So no method works for me. Please help me.
Click to expand...
Click to collapse
i just recommend you to try flashing one more time from a scratch !!
install everything back to stock !! (install spl 1.42.0000 and stock rom)
reboot your device and start again !!
1) install hspl 2.08
2) install radio 2.15.50.14
3) do a task29
4) install magldr/clk (your choice)
5) flash recovery
now !!
insert your memory card in ur pc via a card reader only (dont use any mass storage or anything else !! use a good card reader only !! )
format it to fat32 with allocation size unit to 32kb !!
put the card into phone !!
boot up the device and make a partition 512mb ext -0mb swap !!
http://forum.xda-developers.com/showthread.php?t=1013852
flash this rom!!
atleast for the start or any other rom of your choice !! !!
try booting up !!
may help !!
GOOD LUCK

i think your problem lies in the ext4 partition that you have to make.
Today i tried this ROM which works great.
First things first:
I have a EU HD2 too (512Mb)
with a 16Gb SD card
make sure you have HSPL 2.08 if not see this thread
What i did:
First download these:
-Notepad++ (if you don't have it)
-the ROM from the above link.
-MAGLDR 1.13 (but HD2 Toolkit takes care of this too )
-HD2 Toolkit (for various reasons including Task 29)
-i use 4EXT 2.2.7 by Dansta34 recovery instead of CWM, it's great and does EXT4 partitions
-i flashed 2.15.50.14 radio (but i think 2.14.50.04 is better, at least for me so i'm going to flash it back)
-Now i removed my SD card from the phone and format it in Windows as FAT32, no partitions just yet.
-Plugged the phone to my PC via USB
-Ran HD2 Toolkit and pressed the Task29 button (now your phone is wiped) while with the phone in bootloader (turn on while pressing the Volume down button)
-Use HD2 Toolkit to flash MAG Loader too, just press the button while in bootloader
-Now bring your phone in MAG Loader (turn on and keep the far right button/end call button pressed until the list appears on the screen) and choose USB Flasher (option 5)
-Go to the folder where you downloaded TBD Ext4 Recovery V2.2.7 ported & moded by Dansta34 and find the flash.cfg file.
-Open the file with Notepad++ and change it to look like this(if you are going to try the rom above):
misc ya 8M
recovery rrecov|ro|nospr filesize recovery_leo.img
boot yboot|ro 5M
system ya 220M
cache ya 5M
userdata ya|asize|hr allsize
-Save and close the file.
-Run DAF.exe from the same TBD Ext4 Recovery V2.2.7 ported & moded by Dansta34 folder to flash Recovery.
-When finished enter MAG Loader again and choose option 8 - AD Recovery by pressing the far left button/call button. wait for it to load.
-Choose from the recovery menu Advanced (scroll down with the Volume down button and confirm with the call button)
-Choose Partition SD Card, choose Remove all partitions and start from scratch
-Choose first SDEXT 1024, second SDEXT - skip, swap 128 and most important Choose EXT4 file system.
-Go back and choose File System Check, choose SDCARD and let it repair.
-Now you can remove your SD card and copy the ROM on your FAT32 partition (the largest one in case you run Linux on your PC).
-Let it copy and put the SD card in your phone.
-Boot in MAG Loader, choose AD Recovery and select install ROM from SDcard.
-When prompted choose the proper options (EU HD2, MAGLDR, etc.)
You should be good to go now, it's a great rom.
Let me know if everything is ok, eventually PM me.
Good luck

I think there's the problem. I don't have a microSD cardreader, I only can copy the file directly to the microSD via the USB cable.
Any suggestions for that?

Do you still have the microSD -> SD adapter?
If not, i'm afraid you'll have to find one or a microSD card reader if your planning on flashing a lot
That's the root of your problems too

Disregard everything, it works!
I just had to wait for clockwork approx. one hour until it loaded...

That's not good either..You really don't have to wait that long over anything.
Anyway, when you decide to start fresh, look over my post above, it'll help, took me weeks to understand some things and luckly the search function works.

Yeah, I'll give it a shot, thanks!
The wait is really bad...

I know exactly how you feel, I've been there.
i still don't know everything either but little by little, searching here and there and we'll make it

katalin_2003 said:
-i use 4EXT 2.2.7 by Dansta34 recovery instead of CWM, it's great and does EXT4 partitions
Click to expand...
Click to collapse
Hi Katalin,
Thanks for your post. I intend to use this ext4 partition next time when I''ll flash a new ROM. Tell me please is really good or is just a new thing and that's all?

Salutare
I read about it last night when trying the new NRG ROM since a lot of people were having problems with CWM.
Apparently we needed EXT4 file system partition and CWM does EXT3 only.
The only thing i don't like about it it's the background, i think the rest it's better especially the partitioning menu.

I have written a guide that might can simplimify things some for you.
Sent from my HD2 using xda premium

[Q] Install Android on HTC HD2

Dear All,
I am complete newbie to the world of Android. I have a perfect running HTC HD2, installed Artemis ROM using this thread last year.
Now, I am very interested in running Android on my cellphone.
There are so many Guides/How-TOs/Android Versions to install on HTC HD2, I am really confused which one to go for.
I have no special requirement and hope Wifi / Internet to work well on the Android with good Battery Life.
This is my current HSPL display.
Code:
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40
Please suggest where to start with. Thanks in advance.

It's very simple. What you need?
Check here:
http://forum.xda-developers.com/showthread.php?t=1434860, download MAGLDR ROM: NexusHD2-ICS-CM9_V1.3.zip
Here you have instruction: http://forum.xda-developers.com/showthread.php?t=1044830
- Install Radio 2.15.50.14
- Install HARDSPL 2.08
- Install MAGLDR V1.13
- Install Recovery_250M_system_10M_cache[v3.0.2.4].zip
Also you can read in steps what to do.
Read, read, read. There is everyting clearly explained

Arti_ said:
It's very simple. What you need?
Check here:
http://forum.xda-developers.com/showthread.php?t=1434860, download MAGLDR ROM: NexusHD2-ICS-CM9_V1.3.zip
Here you have instruction: http://forum.xda-developers.com/showthread.php?t=1044830
- Install Radio 2.15.50.14
- Install HARDSPL 2.08
- Install MAGLDR V1.13
- Install Recovery_250M_system_10M_cache[v3.0.2.4].zip
Also you can read in steps what to do.
Read, read, read. There is everyting clearly explained
Click to expand...
Click to collapse
at last wrote somebody something I can understand ... it seems to me very complicated to find out something on this forum when somebody is android newbie.
I have only one question. Could I create ext3 partition in clock work recovery ? Is this android rom able to recognize it and work with it. I have american android 2.3.7 and Im not able to make this partition work in this ROM and thats why I have very small internal memory
BTW is this ROM stable with everything working ?

Samuelgentl said:
at last wrote somebody something I can understand ... it seems to me very complicated to find out something on this forum when somebody is android newbie.
I have only one question. Could I create ext3 partition in clock work recovery ? Is this android rom able to recognize it and work with it. I have american android 2.3.7 and Im not able to make this partition work in this ROM and thats why I have very small internal memory
BTW is this ROM stable with everything working ?
Click to expand...
Click to collapse
I partitioned my SD in CWM and haven't experienced any problems (with Typhoon CM7) so I would guess you'll be fine

Nigeldg said:
I partitioned my SD in CWM and haven't experienced any problems (with Typhoon CM7) so I would guess you'll be fine
Click to expand...
Click to collapse
so if I do this:
2. PARTITION YOUR STORAGE CARD FOR A2SD ROMS (IF REQUIRED)
NOTE1: Setting up a partition on your Storage Card will allow A2SD compatable Roms to automatically install apps to this partition rather than using your phones internal memory. This is useful for people that have alot of apps to install and for people who want to flash a Sense Rom and wont have much internal memory left.
NOTE2: Once you create an A2SD partition on your Storage Card all information will be lost so make sure to backup everything to your pc so it can be copied back after. The accessible space on your Storage Card will be made smaller by the amount of the partition you set up so only make it as big as you need make it huge if you dont have many apps to install)
1. Boot into the Clockwork Mod menu
2. Go down to 'Advanced' and select (by pressing 'Call Button')
3. Select 'Partition SD Card'
4. Select Size of required partition not sure then 1024M is a good size)
5. Make ABSOLUTELY sure you want to continue and then select 0M Swap Size
Your Storage Card will now be partitioned with the size you selected.
ALL DATA ON YOUR STORAGE CARD WILL BE LOST!!
-------------------------------------------------------
-------------------------------------------------------
3. FLASHING A CWM (CLOCKWORK MOD) ROM
1. Connect your phone to your pc via the USB Cable
2. In the Clockwork Mod main menu select 'wipe data/factory reset' and then 'Yes' on the next screen
3. When the data wipe is complete, select 'install zip from sd card' in the main menu
4. Go down to 'choose zip from sdcard' and select
5. Scroll down to your CWM Rom (which you should have copied to the Root of your Storage Card) and select it
6. Select 'Yes' from the options and wait until you get a message saying 'Install from sdcard complete'
Note: You can repeat steps 3-5 if you have more zips to install such as gps data or screen mods
7. Once finished press the 'Back' button to get to the previous menu screen
8. Select 'reboot system now' to restart your phone and your Android Rom should boot
9. Once Android has booted and you have gone through the setup screens, LONG PRESS the 'End' button and select reboot to reboot your phone to avoid possible FC (Force Close) problems
then should be my EXT3 partition working normally with this ROM ? And Im not gonna have any problem with insufficient internal memory ?

Samuelgentl said:
so if I do this:
2. PARTITION YOUR STORAGE CARD FOR A2SD ROMS (IF REQUIRED)
NOTE1: Setting up a partition on your Storage Card will allow A2SD compatable Roms to automatically install apps to this partition rather than using your phones internal memory. This is useful for people that have alot of apps to install and for people who want to flash a Sense Rom and wont have much internal memory left.
NOTE2: Once you create an A2SD partition on your Storage Card all information will be lost so make sure to backup everything to your pc so it can be copied back after. The accessible space on your Storage Card will be made smaller by the amount of the partition you set up so only make it as big as you need make it huge if you dont have many apps to install)
1. Boot into the Clockwork Mod menu
2. Go down to 'Advanced' and select (by pressing 'Call Button')
3. Select 'Partition SD Card'
4. Select Size of required partition not sure then 1024M is a good size)
5. Make ABSOLUTELY sure you want to continue and then select 0M Swap Size
Your Storage Card will now be partitioned with the size you selected.
ALL DATA ON YOUR STORAGE CARD WILL BE LOST!!
-------------------------------------------------------
-------------------------------------------------------
3. FLASHING A CWM (CLOCKWORK MOD) ROM
1. Connect your phone to your pc via the USB Cable
2. In the Clockwork Mod main menu select 'wipe data/factory reset' and then 'Yes' on the next screen
3. When the data wipe is complete, select 'install zip from sd card' in the main menu
4. Go down to 'choose zip from sdcard' and select
5. Scroll down to your CWM Rom (which you should have copied to the Root of your Storage Card) and select it
6. Select 'Yes' from the options and wait until you get a message saying 'Install from sdcard complete'
Note: You can repeat steps 3-5 if you have more zips to install such as gps data or screen mods
7. Once finished press the 'Back' button to get to the previous menu screen
8. Select 'reboot system now' to restart your phone and your Android Rom should boot
9. Once Android has booted and you have gone through the setup screens, LONG PRESS the 'End' button and select reboot to reboot your phone to avoid possible FC (Force Close) problems
then should be my EXT3 partition working normally with this ROM ? And Im not gonna have any problem with insufficient internal memory ?
Click to expand...
Click to collapse
Yep First make a backup of your ROM in CWM, then copy the contents of your SD card to your PC. This is extremely important as partitioning WILL delete all SD contents. Copy the contents of the SD card back over and I think you would be fine as none of the internal stuff would be deleted. Boot up and see how it works. If everything is deleted, simply restore the backup and you're done

Samuelgentl said:
BTW is this ROM stable with everything working ?
Click to expand...
Click to collapse
Version 1.3 still has a few bugs, you can read about them in the given topic. I'm testing this rom on Saturdays and until then I'm very satisfied

Nigeldg said:
Yep First make a backup of your ROM in CWM, then copy the contents of your SD card to your PC. This is extremely important as partitioning WILL delete all SD contents. Copy the contents of the SD card back over and I think you would be fine as none of the internal stuff would be deleted. Boot up and see how it works. If everything is deleted, simply restore the backup and you're done
Click to expand...
Click to collapse
Im afraid that this instructions is working only with typhoon CM7 but not with NexusHD2-ICS-CM9. There is whole thread on how to run ext3 partition in this build but it is too complicated for me.
I just need simple instructions and active download links for programs I need to installation but I think I could just dream about it.
Typhoon CM7 clockwork recovery 3.0.2.5 150MB/5Mb download link is dead. 50 Percent of links on this forum are dead. I tried to download it by using google but it was futile.
Where could I get it ?

I have written a simple guide that may help you.

Arti_ said:
It's very simple. What you need?
Check here:
http://forum.xda-developers.com/showthread.php?t=1434860, download MAGLDR ROM: NexusHD2-ICS-CM9_V1.3.zip
Click to expand...
Click to collapse
Hi Arti,
I was going through the details for this ROM on the same thread. There are some references to issues in
- Google Maps
- Camera
- Contacts Facebook Sync
Any experience overcoming these ? I am really confused which ROM to go for.
I just found this website http://android.hd2roms.com/ having several ROM links.
Please suggest.

kylew1212 said:
I have written a simple guide that may help you.
Click to expand...
Click to collapse
I dont know the Stock MIUI ROM but If everything is working and there is not any problem with internal memory then Im gonna try it
it is really hard to choose the suitable NAND ROM for HD2 because there is too wide selection so it is hard for newbie to pick one.
I had american android 2.3.7 SD and I liked it but problem was battery drain.

Samuelgentl said:
I dont know the Stock MIUI ROM but If everything is working and there is not any problem with internal memory then Im gonna try it
it is really hard to choose the suitable NAND ROM for HD2 because there is too wide selection so it is hard for newbie to pick one.
I had american android 2.3.7 SD and I liked it but problem was battery drain.
Click to expand...
Click to collapse
Stick to MIUI and CM7 ROMs in my opinion, Sense isn't fast (despite what people say, the Sense UI is a RAM hog and doesn't flow very well, even on the Desire S that my brother has) and these have no issues (camcorder on Sense is buggy). Battery drain will be far better on any NAND ROM compared to an SD ROM, and as long as you partition your SD card there won't be any issues with storage.

kylew1212 said:
I have written a simple guide that may help you.
Click to expand...
Click to collapse
KYLEW please help I cant download MIUI 2.2.3 Clk because of this:
The requested page "/hd2/roms/miui2.2.3clk.zip" could not be found
Where could I get it ?
This is my fourth ROM Im trying to install and I have always failed because of dead downloads links
I would like this one because of the good install instructions
Witch CLK should I install ? 1,4 or 1,5? Witch one do you recommend ?

Awesome...
Dear All,
Many thanks for your links and suggestions.
This is what made me a happy man. May be it is useful for others.
1) Downgraded from HSPL 3.03 to HSPL 2.08 from HSLP4.exe
Step by Step Guide
Press volume down button (don’t let go) and power on your phone.
It will load into ‘Red, Green, Blue and White’ screen bootloader.
You can see your HTC HD2 SPL version there.
Connect USB cable from PC to phone.
Serial status will be turned into USB.
At PC, right click on HSPL4.exe and select ‘Run as administrator’.
Click ‘Yes’ if User Access Control prompt up.
Follow onscreen instructions to install.
Do make sure that you select 2.08.HSPL.
After installation, you should see ‘We hacked it!’ on your phone.
That’s all.
2) Download Leo_RADIO_2.15.50.14 from http://www.wupload.in/file/2649215467/Leo_RADIO_2.15.50.14.rar
and
Install RADIO from here http://android.dkszone.net/install-radio-rom-htc-hd2-flash-radio-rom
3) http://forum.xda-developers.com/showthread.php?t=1044830
FLASH CLOCKWORK MOD TO YOUR DEVICE from Recovery_250M_system_10M_cache_v3.0.2.4_.zip
NOTE: There are 3 CWM images attached at the bottom of this thread. You only need to install 1 of the images depending on what type of Android Rom you want to flash. The larger the size of the CWM Partition the less space there will be left for programs installed to your phone.
150MB Partition - For lite Roms without Sense such as CM7. Gives most internal space on your phone for apps
250MB Partition - Standard size Roms or squashed Sense Roms
400MB Partition - Full Sense Roms. Hardly any internal space for apps. 512ROM Leo's will need A2SD external partition set up
If you arent sure which size you need then check the first few posts of the Rom you want to flash as it will usually tell you which size partition it needs.
1. Download the CWM Partition you require and extract it to a new folder on your pc
2. Connect your phone to your pc via the USB Cable
3. Restart your phone and HOLD DOWN the 'End Button' (far right) until the Magldr Menu appears
4. Keep pressing the 'Volume Down' button to goto Option 5. USB Flasher and press the 'Call Button' (far left) to select it
*The screen should now say Wait USB...USB*
5. Run DAF.exe (Right Click and Run As Administrator if you have Vista or Windows 7) in the folder you extracted the image to and follow the intructions on your pc to start flashing
6. After flashing the phone will reboot. HOLD DOWN the 'End Button' (far right) until the Magldr Menu appears
To start Clockwork Mod keep pressing the 'Volume Down' button to goto Option 8. AD Recovery and press the 'Call Button' (far left) to select it
NOTE: If the Rom demands a different size CWM then you can download any of the attached sizes, then extract the contents and edit the flash.cfg file with Notepad. Change the sizes on the following lines depending on what you need:
system ya ***M (partition size)
cache ya **M (cache size)
4) FLASHING A CWM (CLOCKWORK MOD) ROM
http://forum.xda-developers.com/showthread.php?t=1354267
First NexusHD2-IceCreamSandwich_Beta10.zip
and then
NexusHD2-Kernel_2.6.32.15_tytung_ics_r1-MAGLDR-update.zip
1. Connect your phone to your pc via the USB Cable
2. In the Clockwork Mod main menu select 'wipe data/factory reset' and then 'Yes' on the next screen
3. When the data wipe is complete, select 'install zip from sd card' in the main menu
4. Go down to 'choose zip from sdcard' and select
5. Scroll down to your CWM Rom (which you should have copied to the Root of your Storage Card) and select it
6. Select 'Yes' from the options and wait until you get a message saying 'Install from sdcard complete'
Note: You can repeat steps 3-5 if you have more zips to install such as gps data or screen mods
7. Once finished press the 'Back' button to get to the previous menu screen
8. Select 'reboot system now' to restart your phone and your Android Rom should boot
9. Once Android has booted and you have gone through the setup screens, LONG PRESS the 'End' button and select reboot to reboot your phone to avoid possible FC (Force Close) problems
NOTE: The first boot of your Rom will take alot longer than subsequent boots so leave it and give it time (15 minutes max)
IMPORTANT: If anything goes wrong, start fresh (DELETE EVERYTHING) from Wipe HTC HD2 Toolkit (HD2ToolKit4.2.0.1.zip)
Click to expand...
Click to collapse
There are few issues (faced till now) with NexusHD2-IceCreamSandwich_Beta10 (Android 4.0.3) ROM
- No Video
- No Signature feature in Exchange Mail
- Camera hangs
- Gallery hangs sometimes. -- Solved by installing Real Player and opening images from there.
- Backlight seems dim even when full brightness is selected.
- I could not find an option to disable vibration in keyboard. -- Solved by "Go Keyboard" from Market. So far it is working perfectly.
Other than these, I am in love with my HD2.
Please suggest if there are any solutions to these.

vikas027 said:
Hi Arti,
I was going through the details for this ROM on the same thread. There are some references to issues in
- Google Maps
- Camera
- Contacts Facebook Sync
Any experience overcoming these ? I am really confused which ROM to go for.
I just found this website http://android.hd2roms.com/ having several ROM links.
Please suggest.
Click to expand...
Click to collapse
I do not use Google Maps. But I turned down for a while and act as they should.
As for the camera - the camera is working, but I have a problem with the video recording. However, this is the solution to the first page of ROM which I sent to you.
- FB - I read about this problem but to be honest, this synchronization is not necessary to me.
I did not use this site. I checked only the most popular threads on xda. And I also just looked Android 4.0
Regards

how to flash android rom in htc hd2 ?

hi to all...........
i need to know step by step how to anstall android rom in htc HD2
MY Hd2 Information:
Code:
HTC HD2 T8585
Syetéme version
5.2.29020(29020.5.3.12)
manila version
2.5.2012114.0
rom version
Duttys hd2 fam v25 ship fre
radio version
2.15.50.14
protocole version
15.42.50.11u
Code:
memorie flash
[COLOR="Red"][B]512 Mo[/B][/COLOR]
i find some link
http://www.xda-developers.com/android/complete-guide-to-installing-nand-android-on-hd2/
http://forum.xda-developers.com/showthread.php?t=1044830
but all speak about 576 RAM

normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.

magic phone said:
hi to all...........
i need to know step by step how to anstall android rom in htc HD2
MY Hd2 Information:
Code:
HTC HD2 T8585
Syetéme version
5.2.29020(29020.5.3.12)
manila version
2.5.2012114.0
rom version
Duttys hd2 fam v25 ship fre
radio version
2.15.50.14
protocole version
15.42.50.11u
Code:
memorie flash
[COLOR="Red"][B]512 Mo[/B][/COLOR]
i find some link
http://www.xda-developers.com/android/complete-guide-to-installing-nand-android-on-hd2/
http://forum.xda-developers.com/showthread.php?t=1044830
but all speak about 576 RAM
Click to expand...
Click to collapse
Well you clearly haven't read enough! All of these threads show that flashing a .50 radio unlocks the 576 MB RAM. For f**k's sake, stop posting stupid questions in the Q&A when there have been a tonne of them, just use the search and read properly. It isn't hard.
EDIT: Lol, just saw that samsamuel got in a minute before me. Oh how ironic my post now is :')

samsamuel said:
normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.
Click to expand...
Click to collapse
The great thing about the internet is that if you know how to use it .... you can get lots of other opinions viewpoints and lots of stufffffffffffffff that you didn't know before....
and then who knows...............
edit.......I don't feel like a senior member.....

samsamuel said:
normally the answer would be ''good god there are dozens of places telling you this information, good grief, use search!!'' but im feeling friendly, so...
phone into bootloader - use hspl4 to set 2.08.hspl - back into bootloader - flash radio 2.15.50 - reboot phone whilst holding power will start magldr - choose usb flasher - using the nand toolkit select the partition size you want (it will tell you in the rom you want to flash thread, usually post 1) and click partition - this will partition the nand and install clockwork - reboot phone holding power to start magldr - magldr option 8 ad recovery - this will start clockworkmod - advanced - partition sd card (this will wipe your sd card so back it up, , only need to do this once, it creates an EXT partition taht teh phone uses as extra internal storage, 1gb is usually right for most people) - reboot, back into magldr - back into clockwork - mounts and storage - mount sd card - copy the rom.zip you wanna flash to the sd card, still in clockwork choose install zip from sd - select teh rom you copied across - done.
Click to expand...
Click to collapse
@samsamuel
1- thanks for your replay
2-i know about search ,and MR google say there is 2 methode one with SD cartd and the second without SD card
3-im traying the solution without sd card ......the hardspl is OK.....i have the radio2.15.50 but....affter the MAGLDR113 my htc stay at HTC BOOT LOGO ,,?

magic phone said:
affter the MAGLDR113 my htc stay at HTC BOOT LOGO ,,?
Click to expand...
Click to collapse
assuming you mean you flashed magldr, but it doesnt start magldr? just goes to splash screen?
If yes, then either hspl is wrong or radio is wrong.
hspl MUST be 2.08.hspl - enter bootloader and check the spl line.

yo, i wrote this once to another guy per pn. think its still up to date. could be possible that i messed up some facts hehe
redplate said:
MTN_HD2 said:
i wanna the ics too :| but the f'ing wifi doesnt work ... how did you install it ? (every step)
thanks in advance
me : task29>magldr>190/2 190/5 200/10 cwm(tried all) >the rom
Click to expand...
Click to collapse
Hi. thats not that difficult.
Best thing is you read HERE CAREFULLY
But i am trying to explain it easy for you:
First you need to be sure you have the following "things" installed correctly:
1.) Prepare your Mobile
HSPL 2.08 (to be able to flash MAGLRD)
http://forum.xda-developers.com/showpost.php?p=5279234&postcount=1
Radio 2.50.15.14 (which supports 576MB RAM)
http://forum.xda-developers.com/showthread.php?t=611787
MAGLDR 1.13 Bootloader (to be able to install Clockwork Mod)
http://forum.xda-developers.com/showthread.php?t=893618
Recovery (Clockwork Mod; i prefer the Touch version)
http://forum.xda-developers.com/showthread.php?t=1419733
For ICS you need at least 200MB system partition (Recovery Layout; the space from your NAND (intern memory) for your ROM file). Means you have to edit the flash.cfg coming with MAGLDR before flashing the CWM; do this with Notepad++:
I am using following config (flash.cfg):
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 220M
cache ya 5M
userdata ya|asize|hr allsize
Now you are prepared for installing a ROM. In your case ICS.
2.) Flash ROM
Download the .zip file for your ROM. There are two versions. CLK (just another Bootloader) and MAGLDR. We are using MAGLDR. So download it here:
[15.Jan.2012] NexusHD2-ICS-4.0.3-CM9 V1.1
http://forum.xda-developers.com/showthread.php?t=1434860
Now you just need to copy the ROM .zip on your SD-Card. Then load into Bootloader (MAGLDR) and choose point 8. for your Recovery (CWM).
Now, if you had another rom installed, you need to wipe all cache and data including the Dalvik Cache (under Advanced).
Then install your .zip file with "install zip from sd" and wait. Done. Restart your mobile
3.) Install DATA2SD
IF you want to use DATA2SD (means to store apps and system relevant data on your sd-card) you have to create an EXT-Partition on your SD-CARD.
Just do this with CWM, there is an option for it (should be something like "Partition your SD-Card"). I am using 1GB partition with 0MB swap.
Once you have done this navigate to this thread and do EXACTLY what that guy wrote in post #207. But instead of using the file from post #207 use the flashable file from post #174 (40ad2sdx-a2Recovery.zip).
If you did it correctly you are done
And again, for additional info read THIS COMPLETLY.
Have fun
Click to expand...
Click to collapse

samsamuel said:
assuming you mean you flashed magldr, but it doesnt start magldr? just goes to splash screen?
If yes, then either hspl is wrong or radio is wrong.
hspl MUST be 2.08.hspl - enter bootloader and check the spl line.
Click to expand...
Click to collapse
@samsamuel
thanks again my friend ok i do all the step
i have the 2.08hspl....and i have also the task29 affter that the MAGLDR113 work fine......
now i chose the USB flasher mode i know that .the probleme is if i can flash the rom without sd card or not ?

you flash the partition layout (and cwm) through usb flasher, then flash teh rom from sd.

samsamuel said:
you flash the partition layout (and cwm) through usb flasher, then flash teh rom from sd.
Click to expand...
Click to collapse
Ok Now i have this erreur when formating my sd card
Code:
formating /data.......
formating /cache.......
formating /sd-ext......
[COLOR="Red"][B]no app2sd partition found .skipping format of /sd-ect.[/B][/COLOR]
formatting /sdcard/andoid_secure.............
[COLOR="Red"][B]Error mounting /sdcard/android_secure![/B][/COLOR]

Cos you haven't created an ext partition yet?

samsamuel said:
Cos you haven't created an ext partition yet?
Click to expand...
Click to collapse
OOops and how to create an ext partition !!!!! sorry samsamuel this phone make me crazyy

magic phone said:
OOops and how to create an ext partition !!!!! sorry samsamuel this phone make me crazyy
Click to expand...
Click to collapse
Bloody hell, can't you do anything yourself? Are you completely incapable of typing a question into Google!?
Boot into CWM recovery and select partition SD card, choose 1024Mb partition and 0Mb swap. This will delete everything on your SD card though.

Nigeldg said:
Bloody hell, can't you do anything yourself? Are you completely incapable of typing a question into Google!?
Boot into CWM recovery and select partition SD card, choose 1024Mb partition and 0Mb swap. This will delete everything on your SD card though.
Click to expand...
Click to collapse
If you have nothing nice to say, don't say anything at all, i think is better to ask google to ask some new mombre hiere. because your solution dont work and if a choose 1024mb partition i cant format my sd card and i cant copie the rom inside
but with 512M partition all work but phone reboot affter update .thanks to all
and big thanks to samsameul

SD-EXT Size -1mb

Hello
http://forum.xda-developers.com/showthread.php?t=2126053&page=1 I i tried setup that rom on my hd2 but i have problem. First I setup magldr and i did 384mb recovery. After I partioned my sd card with mini tool partition wizard. 32kb cluster with 6,5gb fat32 and 1gb default cluster ext 4. I coppied rom file on my sd card and i entered to ad recorvery>choose zip from sd card and on that page sd card size looks 6593mb but sd ext size is -1. What's wrong and how I fix it? And i didn't see anywhere on topic but did I need use 4extrecorvery etc. another file on sd card? I use only task29 magldr, 384mb recorvery. Sorry for my bad english but i hope you understand me. Thanks all.

Did you set both partitions as Primary when creating them?
Sent from my NexusHD2 using xda premium

shanman-2 said:
Did you set both partitions as Primary when creating them?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
yes i did imgur .com/ 5TyYcYO

pachenkov94 said:
First I setup magldr and i did 384mb recovery.
Click to expand...
Click to collapse
Recovery or system? System should be 384. Recovery should be 6mb for ext4recovery, 8mb for TWRP (which I recommend).
pachenkov94 said:
First I setup magldr and i did 384mb recovery. did I need use 4extrecorvery etc. another file on sd card?
Click to expand...
Click to collapse
You can also use TWRP Extended. It should be better choice than ext4recovery.
http://forum.xda-developers.com/showthread.php?t=2120297
Do you plan to use only Android or dual boot with WM6.5/WP7?
If you're going android only way you may try also CLK instead of MAGLDR - it makes repartitioning NAND easier
Using this file you will get flashable img file (just put in in you sd card and hold vol- during powering) with CLK and TWRP Extendend.
http://www.mediafire.com/?cu40a9sqqbepf0n

donblazello said:
Recovery or system? System should be 384. Recovery should be 6mb for ext4recovery, 8mb for TWRP (which I recommend).]
Click to expand...
Click to collapse
Thank you for your message so so much. I didn't do 4ext etc anything and don't know anything about that. I only know flashing rom with cwm:crying: Which steps I must do for flash them? Do you have a tutorial for that? Also I don't understand anything for TWRP etc. I saw it firs time now:crying: And I want only android. Don't want dual boot etc.
Now I removed phone with task29 and flashed TWRP. What can I do now? Phone waiting on main menu

pachenkov94 said:
Thank you for your message so so much. I didn't do 4ext etc anything and don't know anything about that. I only know flashing rom with cwm:crying: Which steps I must do for flash them? Do you have a tutorial for that? Also I don't understand anything for TWRP etc. I saw it firs time now:crying: And I want only android. Don't want dual boot etc.
Now I removed phone with task29 and flashed TWRP. What can I do now? Phone waiting on main menu
Click to expand...
Click to collapse
Good!
Now, you are in TWRP menu.
1) First, go to reboot (TWRP is touch based) and select bootloader. Phone will reboot to bootloader (clk).
2) Select (navigate via vol+ and vol-, enter the menu by pressing "green" phone) SETTINGS, than RESIZE PARTITION
3) Select SYSTEM and set size to 390.
4) Go back using back arrow button, select COMMIT CHANGES and APPLY
5) Press back arrow button to return to menu and select RECOVERY
Now, you are properly partitioned and back in recovery (TWRP).
6) Go to ADVANCED -> PARTITION SD CARD. Check your partitions. First one (SD card) should be VFAT. Second one is SD-Ext. Check SD-Ext size. Should read: 1024 MB or something similar If it is so, click arrow in lower left corner of screen. No you are back on home screen.
7) Select INSTALL. In file manager select zip file with rom you want to install. Installer will start. elect DATA ON EXT type of install (should be best choice for you). Remember to select PPP type of connection if asked.
8) When installer will finish, reboot. Your phone should boot straight to android.

donblazello said:
Good!
Now, you are in TWRP menu.
1) First, go to reboot (TWRP is touch based) and select bootloader. Phone will reboot to bootloader (clk).
2) Select (navigate via vol+ and vol-, enter the menu by pressing "green" phone) SETTINGS, than RESIZE PARTITION
3) Select SYSTEM and set size to 390.
4) Go back using back arrow button, select COMMIT CHANGES and APPLY
5) Press back arrow button to return to menu and select RECOVERY
Now, you are properly partitioned and back in recovery (TWRP).
6) Go to ADVANCED -> PARTITION SD CARD. Check your partitions. First one (SD card) should be VFAT. Second one is SD-Ext. Check SD-Ext size. Should read: 1024 MB or something similar If it is so, click arrow in lower left corner of screen. No you are back on home screen.
7) Select INSTALL. In file manager select zip file with rom you want to install. Installer will start. elect DATA ON EXT type of install (should be best choice for you). Remember to select PPP type of connection if asked.
8) When installer will finish, reboot. Your phone should boot straight to android.
Click to expand...
Click to collapse
I did it ) So thanks for your help