Database Users

More Devs post easy instructions like this?

Maybe more Devs post easy instructions like this??
I've been flashing ever since the HD2 existed and flashed hundreds or Builds, but was a bit, well...intimidated by the process of installing a build by anything other than using the DFT method, but today I came across a Coredroid build, so i flashed it using his instructions and have to say...EVEN I did it with 100% no problem at all.
Trust me, if I can do it, then a 2yr old can do it.
Here is the thread which contains the, what I find to be the best, easiest and well laid out set of instructions for, not-so-confident flashers like me:
(bare in mind, these particular instructions, as far as i'm aware are ONLY for Coredroid build)
http://forum.xda-developers.com/showthread.php?t=926507
HD2 COREDROID Desire HD V1
1. Extract downloaded zip to a folder of your choice
2. Copy contents of copy_to_sd_root (initrd.gz and zImage) to the root of your sd card
3. Boot into magldr and select USB Flasher option while phone is connected to PC
4. Run DAF.exe included in the zip and follow onscreen instructions.
5. After complete devise will reboot in magldr chose "Boot AD SD" option
6. Device will boot into Clockwork Recovery
7. Select advanced
8. Select Partition SD card (remember too backup all valuable data you have on SD Card)
9. Selet (minimum 512M)(maximum 1024M) Chose what fits best for you Recomended size 1024M
10.Select Swap 0M
11.Wait for the process too finish (do not restart device stay in ClockWork recovery)
12.Connect the Device into USB
13.select mounts and storage
14.select mount USB storage
15.Copy contents of copy_to_sd_root (initrd.gz, zImage) to the root of your sd card
16.Copy CoreDroid_HD_HD2_v*.zip to the root of your sd card
17.Press back key after finish
18.Press back key once more
19.Select install zip from sdcard
20.Select choose zip from sdcard
21.Select CoreDroid_HD_HD2_v* file and then confirm
22.Wait for it too finish
23.After flash options pop up again Press back Key
24.select reboot system now
25.Let it boot wait about +-10Min Enjoy
Thank you and dont forget to leave a comment on XDA ENJOY

Ok, I give up, NONE OF THE METHODS WORK

I am now sitting in front of my HD2 for more than three hours and have watched several tutorials on how to get any android rom onto my HD2.
With MAGLDR I get the "123456 GO GO GO" - and then nothing happens
And before that there is a NAND KERNEL OPEN FAILED
Trying to get to the USB Mass Storage mode, Windows 7 (64) does not recognize the SD card. However, this shows then up in the USB eject menu (Eject MAGLDR)
With cLK I get some "flash_read_image: failed (511 errors) ERROR: Cannot read recovery_header" error
On my SD card, there is a ZIP file as downloaded "NexusHD2-IceCreamSandwich_Beta10.zip", formatted as FAT32.
Before, I flashed a stock WinMo 6.5, installed HSPL and a matching Radio one more time...
So no method works for me. Please help me.

1 - the mass storage in magldr doesn't work (for large files at least)
2 - you need to flash cwm with the correct partition layout after flashing magldr(or clk) and before flashing the rom.

Zuzler said:
I am now sitting in front of my HD2 for more than three hours and have watched several tutorials on how to get any android rom onto my HD2.
With MAGLDR I get the "123456 GO GO GO" - and then nothing happens
And before that there is a NAND KERNEL OPEN FAILED
Trying to get to the USB Mass Storage mode, Windows 7 (64) does not recognize the SD card. However, this shows then up in the USB eject menu (Eject MAGLDR)
With cLK I get some "flash_read_image: failed (511 errors) ERROR: Cannot read recovery_header" error
On my SD card, there is a ZIP file as downloaded "NexusHD2-IceCreamSandwich_Beta10.zip", formatted as FAT32.
Before, I flashed a stock WinMo 6.5, installed HSPL and a matching Radio one more time...
So no method works for me. Please help me.
Click to expand...
Click to collapse
i just recommend you to try flashing one more time from a scratch !!
install everything back to stock !! (install spl 1.42.0000 and stock rom)
reboot your device and start again !!
1) install hspl 2.08
2) install radio 2.15.50.14
3) do a task29
4) install magldr/clk (your choice)
5) flash recovery
now !!
insert your memory card in ur pc via a card reader only (dont use any mass storage or anything else !! use a good card reader only !! )
format it to fat32 with allocation size unit to 32kb !!
put the card into phone !!
boot up the device and make a partition 512mb ext -0mb swap !!
http://forum.xda-developers.com/showthread.php?t=1013852
flash this rom!!
atleast for the start or any other rom of your choice !! !!
try booting up !!
may help !!
GOOD LUCK

i think your problem lies in the ext4 partition that you have to make.
Today i tried this ROM which works great.
First things first:
I have a EU HD2 too (512Mb)
with a 16Gb SD card
make sure you have HSPL 2.08 if not see this thread
What i did:
First download these:
-Notepad++ (if you don't have it)
-the ROM from the above link.
-MAGLDR 1.13 (but HD2 Toolkit takes care of this too )
-HD2 Toolkit (for various reasons including Task 29)
-i use 4EXT 2.2.7 by Dansta34 recovery instead of CWM, it's great and does EXT4 partitions
-i flashed 2.15.50.14 radio (but i think 2.14.50.04 is better, at least for me so i'm going to flash it back)
-Now i removed my SD card from the phone and format it in Windows as FAT32, no partitions just yet.
-Plugged the phone to my PC via USB
-Ran HD2 Toolkit and pressed the Task29 button (now your phone is wiped) while with the phone in bootloader (turn on while pressing the Volume down button)
-Use HD2 Toolkit to flash MAG Loader too, just press the button while in bootloader
-Now bring your phone in MAG Loader (turn on and keep the far right button/end call button pressed until the list appears on the screen) and choose USB Flasher (option 5)
-Go to the folder where you downloaded TBD Ext4 Recovery V2.2.7 ported & moded by Dansta34 and find the flash.cfg file.
-Open the file with Notepad++ and change it to look like this(if you are going to try the rom above):
misc ya 8M
recovery rrecov|ro|nospr filesize recovery_leo.img
boot yboot|ro 5M
system ya 220M
cache ya 5M
userdata ya|asize|hr allsize
-Save and close the file.
-Run DAF.exe from the same TBD Ext4 Recovery V2.2.7 ported & moded by Dansta34 folder to flash Recovery.
-When finished enter MAG Loader again and choose option 8 - AD Recovery by pressing the far left button/call button. wait for it to load.
-Choose from the recovery menu Advanced (scroll down with the Volume down button and confirm with the call button)
-Choose Partition SD Card, choose Remove all partitions and start from scratch
-Choose first SDEXT 1024, second SDEXT - skip, swap 128 and most important Choose EXT4 file system.
-Go back and choose File System Check, choose SDCARD and let it repair.
-Now you can remove your SD card and copy the ROM on your FAT32 partition (the largest one in case you run Linux on your PC).
-Let it copy and put the SD card in your phone.
-Boot in MAG Loader, choose AD Recovery and select install ROM from SDcard.
-When prompted choose the proper options (EU HD2, MAGLDR, etc.)
You should be good to go now, it's a great rom.
Let me know if everything is ok, eventually PM me.
Good luck

I think there's the problem. I don't have a microSD cardreader, I only can copy the file directly to the microSD via the USB cable.
Any suggestions for that?

Do you still have the microSD -> SD adapter?
If not, i'm afraid you'll have to find one or a microSD card reader if your planning on flashing a lot
That's the root of your problems too

Disregard everything, it works!
I just had to wait for clockwork approx. one hour until it loaded...

That's not good either..You really don't have to wait that long over anything.
Anyway, when you decide to start fresh, look over my post above, it'll help, took me weeks to understand some things and luckly the search function works.

Yeah, I'll give it a shot, thanks!
The wait is really bad...

I know exactly how you feel, I've been there.
i still don't know everything either but little by little, searching here and there and we'll make it

katalin_2003 said:
-i use 4EXT 2.2.7 by Dansta34 recovery instead of CWM, it's great and does EXT4 partitions
Click to expand...
Click to collapse
Hi Katalin,
Thanks for your post. I intend to use this ext4 partition next time when I''ll flash a new ROM. Tell me please is really good or is just a new thing and that's all?

Salutare
I read about it last night when trying the new NRG ROM since a lot of people were having problems with CWM.
Apparently we needed EXT4 file system partition and CWM does EXT3 only.
The only thing i don't like about it it's the background, i think the rest it's better especially the partitioning menu.

I have written a guide that might can simplimify things some for you.
Sent from my HD2 using xda premium

[Q] Desperatley need help ....

Hello everyone..
I have a real quick question..
1) Used HD2Toolkit4.2.0.1 and performed Wipe (task29)
2) With HD2Toolkit, installed HSPL (bootload shows SPL-2.0.8.HSPL)
3) With HD2Toolkit, installed MAGLDR (reboot and phone goes into MAGDLR)
Heres the problem
1) Go into bootloader and try to install Recovery_v1.3_150 but program does not recognize usb connection. (failed install)
2) Go into MAGDLR and go down to #5 USB Flasher and computer is not recognizing connection between phone and computer.
3) Went into bootloader (bootloader shows "usb" and Tried to install DFT android flasher for HTC LEO but install fails saying: "usb init failed".
4) On MAGDLR screen, i go down to #8 AD Recovery and screen says : No boot sources
What am i doing wrong and why isnt computer acknowledging usb connection with phone and installing progs i need to flash new rom. (using windows 7 ultimate)
I previously performed my first flash to this phone yesterday and everything went just fine. Someone with the know-how please tell me what i am doing wrong and what i should do to complete this properly.
(trying to install Coredroid ONE X)
Thank You

Ok i have figured out how to get clockwordmod recovery installed as well as DFT nanddroid.
but now i am having a problem getting coredroid v3.6 installed. when i use clockworkmod, i partition the sd card using 1024 and 0. then i mount usb, transfer over coredroid v3.6.zip into new temporary F.Drive. After, i install zip from sdcard then choose zip from sdcard. The program locates coredroid and ask to install rom and i execute command. the flash process begins. Once rom is finished loading it freezes up and i have to remove battery. Rom is lost at this point and it goes back into MAGDLR.
What is the problem at this point. ?

What partition size did you use and what is recommended for CoreDroid? Make sure this is correct, otherwise the ROM won't boot.

Noob Dude said:
then i mount usb, transfer over coredroid v3.6.zip into new temporary F.Drive.
Click to expand...
Click to collapse
Don't use MAGLDR's USB Mass Storage, use an SD reader.

@ NIGELDG - Perhaps its the partitition size that could be the problem. But this is the partition i use from the Coredroid instructions.
Using ClockworkMod :
Goto Partition SD Card menu.Select maximum 1024m. (which is recommended from coredroid instructions),then it says to Select the 0m .
@ MARVLESZ - Its not Mass usb storage that im using:
Using ClockworkMOD :
I go to mount USB storage
A new drive is mounted to your PC.
Navigate to MyComputer and open the new drive (ex: F: E: G: etc…)
Go to the HD2_Core_Droid_Desire_HD_V1.12 folder
Copy the HD2_Core_DroidDesire_HD_V1.12.zip to the HD2 sd card root (the new mounted drive ex: F.
When finished copying , i unmount then:
“-install zip from sdcard”, and press call button (left).
“-choose zip from sdcard”, and press call button (left).
Select the CoreDroid_V*.*.zip, and let it install.
Problem is that it will sometimes install 46% of rom then freeze up.
Other times it will load the entire rom up, say its complete then freeze up and not let me continue with reboot.
(Even though the instructions say this is what you use to install coredroid HD2 with, when reading the instructions it says this is for coredroid desire)
Which instructions should i use or what step am i not doing correctly?

Noob Dude said:
@ NIGELDG - Perhaps its the partitition size that could be the problem. But this is the partition i use from the Coredroid instructions.
Using ClockworkMod :
Goto Partition SD Card menu.Select maximum 1024m. (which is recommended from coredroid instructions),then it says to Select the 0m .
Click to expand...
Click to collapse
not that type of partition, thats the ext partition. He means the system partition size you chose when you installed CWM, , that determines which roms you can flash, the rom tells you in post 1 (or 2) teh size you need.
Problem is that it will sometimes install 46% of rom then freeze up.
Other times it will load the entire rom up, say its complete then freeze up and not let me continue with reboot.
<snip>
I previously performed my first flash to this phone yesterday and everything went just fine. Someone with the know-how please tell me what i am doing wrong and what i should do to complete this properly.
Click to expand...
Click to collapse
phone feel warm lower back at all? try chilling it in teh fridge for twenty minutes, see if a flash goes all teh way through. (after first confirming the system partition size as mentioned)

ok.. ill try that.. thank you

Help once again....
Where can i locate the necessary partition needed to successfully install coredroid . ?? Do i partition it with HDToolkit? or clockworkmod?
I know that clockworkmod recovery performs an sd card partition but according the coredroid DHD instructions it says to partition 1024 and then 0 (dont understand the reason for this partition) Each time i follow the coredroid instructions, the farthest i get is to installing the rom but once its reached 100% and says to continue for reboot, the phone freezes and i cannot reboot. when i take the battery out to reboot, it goes back to clockwork (or is it magdlr, but no coredroid rom is loaded.
If ANYONE that has flashed: HD2 CoreDroid GB 2.3.5 V3.7 & Froyo 1.8 , PLEASE find the time to give me the step-by-step on which partition size (what program to partition it-HD2toolkit i presume) and the necessary steps to install this correctly. ill send you a cyber case of ShockTop or Heineken.

The 1024 and 0 refer to creating the ext partition on the SD card through cwm,,, namely 1gb ext and 0 swap.
What you need is the partition size needed for the system partition. It will tell you in post 1 of that roms thread,, usually something like " 5/150/5" and in this case you use the toolkit,, choose 150 on the left, put 5 in the cache box below, then click repartition.

samsamuel said:
The 1024 and 0 refer to creating the ext partition on the SD card through cwm,,, namely 1gb ext and 0 swap.
What you need is the partition size needed for the system partition. It will tell you in post 1 of that roms thread,, usually something like " 5/150/5" and in this case you use the toolkit,, choose 150 on the left, put 5 in the cache box below, then click repartition.
Click to expand...
Click to collapse
ok so with that being said:
1) Load Hdtoolkit
2) Perform task 29 wipe
3) With HDTK, partition 150 and cache 5 (if according to threads recommendation for particular rom)
4) (im assuming i wont have to reinstall HSPL 2.08 correct)
5) With HDTK install MAGDLR
6) Install clockworkmod rec. (not from HDTK)
7) load clockwork and partition EXT 1024 and 0
8) Load rom from zip
9) that should be it.?
Anything im missing or anything i should add? And what if i like my current rom better than the new rom i just installed. Anyway of preserving that? or just install it again?

Pretty much, but a few notes...
2) no need to task29 99 times in 100. Only if you are having real troubles. Its rarely needed, and just increases odds of getting bad blocks.
3) 5) and 6)
Performing the partition installs cwm at the same time, and no need to reinstall magldr (unless you lost it by doing task29)
if you did the steps you listed, step 3 couldn't work (because no magldr) and would be pointless anyway, because step 6 is exactly the same as step 3. "Partitioning" and "installing cwm) are the same thing.
4) correct, Hspl and the radio are two things you needn't worry about unless you flash a stock winmo rom.

problem partitioning
Ok... im going to give it a shot with installing this new rom.
Ran into a snag though... coredroid says the following:
boot 10
system 180
cache 10
Now ive just done a task29 with HDTOOLKIT.. (successful wipe).
Ive placed phone in bootloader
With HDtoolkit - MAGDLR Repartition set at 200 (since there is no 180) and Cache is set at 10. ( i dont see boot on tooklit)
Execute Repartition BUT DFT is stating: (USB init failed)
(bootloader on phone says USB)
Whats the problem or what am i not doing right or missing?.

sams the man
samsamuel said:
Pretty much, but a few notes...
2) no need to task29 99 times in 100. Only if you are having real troubles. Its rarely needed, and just increases odds of getting bad blocks.
3) 5) and 6)
Performing the partition installs cwm at the same time, and no need to reinstall magldr (unless you lost it by doing task29)
if you did the steps you listed, step 3 couldn't work (because no magldr) and would be pointless anyway, because step 6 is exactly the same as step 3. "Partitioning" and "installing cwm) are the same thing.
4) correct, Hspl and the radio are two things you needn't worry about unless you flash a stock winmo rom.
Click to expand...
Click to collapse
ok samsamuel.
1) i tasked 29.. (sorry didnt catch your other post about overwiping the phone)
2) checked to make sure hspl is one the phone still (bootloader)
3) kept phone in bootloader mode (shows USB connection)
4) selected MAGDLR Repartition on HD2TK
5) Set System Partition at 200 (since 180 is not avavilable as stated on coredroid page one )
6) Set Cache at 10 (according to coredroid)
7) Executed Repartition.
8) DFT tries to parttition phone but says USB Init Failed.
Where is the problem here?

You can set 180 by choosing custom at end of sizes list.
Phone should be in magldr - USB flasher mode, not bootloader.

Ok ive done everything according to what has to be done... thanks a million guys..!!!! BUT!!!
1) installation completed.
2) Rom says to REBOOT NOW
3) Pressed green call button to confirm
4) Screen says: Thanks and enjoy your new firmware with FINISH button at bottom.
5) Try to execute FINISH button but seems as though screen is frozen.
Anyone who has installed this rom before, is this common? Should i wait?
Each time it does this, I remove the battery and it goes back to MAGDLR.
Help please!!

ok... ive got it...!!!! ive figured out that the coredroid ONE rom must not be compatible with the hd2.. but when i ran coredroid DHD v3.7 it installed automatically...
i really want to say thank you to all you guys that pitched in with helping an old geezer like me. i know your time is more important, but you were considerate enough to give a hand. it was truly appreciated!! Thanks again Samsamuel....

NativeSD simple tutorial

All tools can be download by these sites:
http://forum.xda-developers.com/showthread.php?t=1869673
http://forum.xda-developers.com/showpost.php?p=31256707&postcount=967
LEO is still the king!
Thanks a lot, securecrt and Xylograph!
I What is "NativeSD"
As the name shows, the SD card now do what native storage do. In other words, we can leave the nand and done almost everthing with one SD card!
II Benifits of NativeSD
1. Common benifits
Don't need to worry about bad blocks in nand, no need to adjust system size。
2. On premise of large storage of SD card
The partition used as native storage can be very large duo to your SD card(<32GB).
Muilt ROMs(wm,wp,androids)
3. On premise of fast SD card
Faster Read/Write speed than NAND ROMs,better。
III Install ROM
1. Prepare
*1）Android rom that support NativeSD, cellphone(LEO,with SD card, battery>50%), computer,cable,4EXT recovery
*2)Backup all your data on SD card(if you want to keep it).
2.magldr users
1)This is the case that you download the SD version of 4EXT recovery.
copy the unziped files to you fold "a" in your SD card.("a" is just a sign,can be any name,just make sure the folder is in the root directory of SD card)Notice: please make sure these files are in the root directory of "a",not any sub folder:clcad.exe,haret.exe,initrd.gz,startup.txt,zImage
2）This is the case that you download and already install the nand version of 4EXT recovery.
2.1Boot to recovery
if 1)
2.1.2 hold the red button while boot, when the menu of magldr shows, choose
10.Services，then 1.BootSettings，and then 3.AD SD Dir，loacate to your folder "a"，press green button to confirm.
2.1.2when back to magldr menu, choose 10.Services，then 1.BootSettings，then 1.Boot source，and then 1. Android from SD, press green button to confirm.again when back to magldr menu，choose 2.Boot AD SD。
if 2）
2.1.3 hold the red button while boot, when the menu of magldr shows, choose 8.AD Recovery
2.2 Now in recovery，Partition SD Card
2.2.1 choose advanced
2.2.2 choose Partition SD Card ->
2.2.3 choose Remove all partions and start from starth
2.2.4 choose the size of EXT partition as you want，all your system and apps will be install to this partition，so if you want more systems ,choose a big one.（must large than 512M）
2.2.5 choose the size of swap partion，I recommend 0(choose skipe).
2.2.6 choose Yes - I'm sure，waitting for the progress to finish。
2.2.7 when back to recovery main page
if 1）
choose power menu，then choose Reboot ，and hold the red button while boot, when the menu of magldr shows，connect the phone to your computer，choose 4.USB MassStg，repeat 1),2.1.1,2.2.2 and 2.3.7.2
if 2）
2.2.7.2connect the phone to your computer，choose toogle usb storage，copy you download rom to your SD card，safe eject，pull of the cable，choose unmount on the phone。
2.3 Install rom
2.3.1 choose install from sdcard at the main page of recovery
2.3.2 choose zip from sdcard
2.3.3 choose your rom
2.3.4 choose Yes - install ...（... is the name of rom）
2.3.5 wait for the install page to show，tap Next
2.3.6 tap Install to SD-EXT，then tap Next
2.3.7 tap RMNET Connection，and then tap Next
2.3.8 tap Next and wait for the install finish，when done tap Next
2.3.9 make sure Reboot is choosed and tap Finish，and hold the red button while boot ,when magldr shows, follow 2.1.1，but now "a" is response of folder "NATIVESD"。when back to magldr main menu，choose 2.Boot AD SD。
Now you can enter your new rom.
2.4 Install another rom
2.4.1 enter recovery
if 1）follow 2.1.1，when magldr menu shows，choose 2.Boot AD SD。
if 2）please follow 2.1.3
follow 2.3
2.5 Reboot to other rom
Enter one android rom，install NativeADMultiBoot.apk,when done,run the app，choose the rom your want to reboot to（pleasre allow root），then press reboot。
3.clk users（Three rom is avaliable，1 nand + 2 NativeSD）
3.1 install clk
3.1.1 unzip the file，put the file LEOIMG.nbh into the root directory of your SD card。then turn off the phone.
3.1.2 hold the volume mines and red button，when blue" loading..." shows release the buttons，wait a moment, when blue text shows inthe middle of the screen,press red button to flash clk，when done press the reset button or pull off your battery and reboot the phone。while reboot, hold back button to enter Bootloader。
please google how to use clk.
optional：change recovery to 4EXTNAND
**unzipe 4EXTNAND version's recovery，find recovery_leo.img，incase thst you put it in folder 'b"（please notice that "b"is just a sign here,you need to use a full directory such as d:/b）
**on Bootloader main menu choose INFO，then choose ENABLE USB DETECTION
**resize partion recovery to 7m，connect to computer, make sure the "usb" is show at the bottom of the phone，run adb and excute：fastboot flash recovery b/recovery_leo.img
enter recovery and partion SD card，if use 4EXT version recovery，please follow 2.2.1~2.2.6；or please the introduction of the recovery you used（not offer here）。
3.2 flash nand rom
please google.
3.3 flash sboot EXT rom
3.3.1 enter bootloader and choose settings then add sboot，wait the phone back to bootloader main menu
3.3.2when back to main menu, choose RECOVERY to enter recovery
please follow 2.3.1~2.3.6
3.3.3 make sure RMNET Connectionis not choosed，then tap Next
3.3.4 tap Nextand wait for the intall done，when finish tap Next
3.3.5 make sure Reboot is unchecked and tap Finish
3.3.6 follow 2.3.1，2.3.2，choose flash_sboot_v2.zip，and follow 2.3.4
when flash done, reboot to BootLoader and choose ANDROID SBOOT to enter the new rom。
3.4 flash tboot rom（thanks bojanbl）
follow 3.3，just replace sboot with tboot。
3.5 Reboot to other rom
hold the back button while boot to enter,bootloader，when the menu shows,choose a rom to boot。
4.a version of magldr that can be flash vir SD card，just flash it like you flash clk，if intereted,you can have a try.
View attachment SD_flash_magldr.zip

palce holder

Thank your for this How-to!

how about wp7 user?

dalfshiro said:
how about wp7 user?
Click to expand...
Click to collapse
give this a try Triple Boot WP7+SD+NativeSD EXT4 @ 1 SD with pictures

mengfei said:
give this a try Triple Boot WP7+SD+NativeSD EXT4 @ 1 SD with pictures
Click to expand...
Click to collapse
helpfull..thanks maaannn..:laugh::good::good::good::good::victory:

Nice tutorial...:good:
I think one thing is missing though...
How to uninstall one of the nativesd rom.
Regards
Rui

Thank you very much!!

Can't boot
I made EXT4 partition, and instaled Magldr, and than instaled WM ROM, and copied EXT4SD recovery (first one on list), extract, and use folder '4EXTRecovery' and paste to SD card root, and now, what to do(?) how to get in recovery mod, or, how to get to Magldr menu? Please help

NativeSD without flashing MAGLDR or cLK?
my background:
I use Android ICS and MIUI on Leo HTC HD2, booting from SD-Card using haret.exe in WM6.5.
I can't flash my device with MAGLDR or cLK, because it's leased and I have to return it back in some time with the original WM6.5.
Now my question:
Can I use native SD instead of "standart SD", because I hope it's faster, wihthout flashing any custom boot loader and destroing the original OS?
If I got it right, flashing a MAGLDR or cLK erases the complete device (except of HSPL and radio), right?
The only thing I dared to do before, was to flash the HSPL and a Radio Update, because this didn't touched the WM6.5.
I came so far to create a EXT4 and a FAT32 partitions on my SD-Card (32MB, Class 10) with "MiniTool Partition Wizard Home Edition 7.6". Then I downloaded the 4EXT Recovery and booted it from WM6.5 with haret.exe, but now I'm stucked.
All I got is, the 4EXT Recovery do the same job as this MiniTool. It makes partitions on my SD-Card.
I planed to install NexusHD2-JellyBean-4.1.2-CM10 V1.1 ROM as NativeSD, but I'm afraid I can't do this without flashing the MAGLDR or cLK and erasing the WM6.5
Any help?

thanks for the guide

leschakk said:
my background:
I use Android ICS and MIUI on Leo HTC HD2, booting from SD-Card using haret.exe in WM6.5.
I can't flash my device with MAGLDR or cLK, because it's leased and I have to return it back in some time with the original WM6.5.
Now my question:
Can I use native SD instead of "standart SD", because I hope it's faster, wihthout flashing any custom boot loader and destroing the original OS?
If I got it right, flashing a MAGLDR or cLK erases the complete device (except of HSPL and radio), right?
The only thing I dared to do before, was to flash the HSPL and a Radio Update, because this didn't touched the WM6.5.
I came so far to create a EXT4 and a FAT32 partitions on my SD-Card (32MB, Class 10) with "MiniTool Partition Wizard Home Edition 7.6". Then I downloaded the 4EXT Recovery and booted it from WM6.5 with haret.exe, but now I'm stucked.
All I got is, the 4EXT Recovery do the same job as this MiniTool. It makes partitions on my SD-Card.
I planed to install NexusHD2-JellyBean-4.1.2-CM10 V1.1 ROM as NativeSD, but I'm afraid I can't do this without flashing the MAGLDR or cLK and erasing the WM6.5
Any help?
Click to expand...
Click to collapse
OK, I helped myself. Thanks!
Partitioned the SD-Card with 4EXT-Recovery again. Created 2 EXT4 partitions 2 GB each, the rest (25 GB) goes for the FAT32 partition.
Then installed the "NexusHD2-JellyBean-4.1.2-CM10 V1.1 ROM".ZIP (was an AROMA installer) from FAT32 partition and it worked!
Altough it's all very slow and the second EXT4 partition is unused. don't know why the recovery aked my to create one.

"I What is "NativeSD"
As the name shows, the SD card now do what native storage do. In other words, we can leave the nand and done almost everthing with one SD card!"
I'm REALLY new here so this might be a naive question but does that mean we'll be able to run WM 6.5 and WP 7 in a dual boot configuration now? From what I've heard they can only be installed on the HD2's NAND leaving room for either or, but since you say that NativeSD can do whatever the native storage does I thought it might be possible to run them direct off the SD?

Thank you for this guide.

SD-EXT Size -1mb

Hello
http://forum.xda-developers.com/showthread.php?t=2126053&page=1 I i tried setup that rom on my hd2 but i have problem. First I setup magldr and i did 384mb recovery. After I partioned my sd card with mini tool partition wizard. 32kb cluster with 6,5gb fat32 and 1gb default cluster ext 4. I coppied rom file on my sd card and i entered to ad recorvery>choose zip from sd card and on that page sd card size looks 6593mb but sd ext size is -1. What's wrong and how I fix it? And i didn't see anywhere on topic but did I need use 4extrecorvery etc. another file on sd card? I use only task29 magldr, 384mb recorvery. Sorry for my bad english but i hope you understand me. Thanks all.

Did you set both partitions as Primary when creating them?
Sent from my NexusHD2 using xda premium

shanman-2 said:
Did you set both partitions as Primary when creating them?
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
yes i did imgur .com/ 5TyYcYO

pachenkov94 said:
First I setup magldr and i did 384mb recovery.
Click to expand...
Click to collapse
Recovery or system? System should be 384. Recovery should be 6mb for ext4recovery, 8mb for TWRP (which I recommend).
pachenkov94 said:
First I setup magldr and i did 384mb recovery. did I need use 4extrecorvery etc. another file on sd card?
Click to expand...
Click to collapse
You can also use TWRP Extended. It should be better choice than ext4recovery.
http://forum.xda-developers.com/showthread.php?t=2120297
Do you plan to use only Android or dual boot with WM6.5/WP7?
If you're going android only way you may try also CLK instead of MAGLDR - it makes repartitioning NAND easier
Using this file you will get flashable img file (just put in in you sd card and hold vol- during powering) with CLK and TWRP Extendend.
http://www.mediafire.com/?cu40a9sqqbepf0n

donblazello said:
Recovery or system? System should be 384. Recovery should be 6mb for ext4recovery, 8mb for TWRP (which I recommend).]
Click to expand...
Click to collapse
Thank you for your message so so much. I didn't do 4ext etc anything and don't know anything about that. I only know flashing rom with cwm:crying: Which steps I must do for flash them? Do you have a tutorial for that? Also I don't understand anything for TWRP etc. I saw it firs time now:crying: And I want only android. Don't want dual boot etc.
Now I removed phone with task29 and flashed TWRP. What can I do now? Phone waiting on main menu

pachenkov94 said:
Thank you for your message so so much. I didn't do 4ext etc anything and don't know anything about that. I only know flashing rom with cwm:crying: Which steps I must do for flash them? Do you have a tutorial for that? Also I don't understand anything for TWRP etc. I saw it firs time now:crying: And I want only android. Don't want dual boot etc.
Now I removed phone with task29 and flashed TWRP. What can I do now? Phone waiting on main menu
Click to expand...
Click to collapse
Good!
Now, you are in TWRP menu.
1) First, go to reboot (TWRP is touch based) and select bootloader. Phone will reboot to bootloader (clk).
2) Select (navigate via vol+ and vol-, enter the menu by pressing "green" phone) SETTINGS, than RESIZE PARTITION
3) Select SYSTEM and set size to 390.
4) Go back using back arrow button, select COMMIT CHANGES and APPLY
5) Press back arrow button to return to menu and select RECOVERY
Now, you are properly partitioned and back in recovery (TWRP).
6) Go to ADVANCED -> PARTITION SD CARD. Check your partitions. First one (SD card) should be VFAT. Second one is SD-Ext. Check SD-Ext size. Should read: 1024 MB or something similar If it is so, click arrow in lower left corner of screen. No you are back on home screen.
7) Select INSTALL. In file manager select zip file with rom you want to install. Installer will start. elect DATA ON EXT type of install (should be best choice for you). Remember to select PPP type of connection if asked.
8) When installer will finish, reboot. Your phone should boot straight to android.

donblazello said:
Good!
Now, you are in TWRP menu.
1) First, go to reboot (TWRP is touch based) and select bootloader. Phone will reboot to bootloader (clk).
2) Select (navigate via vol+ and vol-, enter the menu by pressing "green" phone) SETTINGS, than RESIZE PARTITION
3) Select SYSTEM and set size to 390.
4) Go back using back arrow button, select COMMIT CHANGES and APPLY
5) Press back arrow button to return to menu and select RECOVERY
Now, you are properly partitioned and back in recovery (TWRP).
6) Go to ADVANCED -> PARTITION SD CARD. Check your partitions. First one (SD card) should be VFAT. Second one is SD-Ext. Check SD-Ext size. Should read: 1024 MB or something similar If it is so, click arrow in lower left corner of screen. No you are back on home screen.
7) Select INSTALL. In file manager select zip file with rom you want to install. Installer will start. elect DATA ON EXT type of install (should be best choice for you). Remember to select PPP type of connection if asked.
8) When installer will finish, reboot. Your phone should boot straight to android.
Click to expand...
Click to collapse
I did it ) So thanks for your help