[Q] GT-i9505 works but screen is black, no splash - Galaxy S 4 Q&A, Help & Troubleshooting

Hi people. I have been running a rooted phone for a while and decided to go back to unrooted recently. I decided I would like to use the barclays app and apply the new updates that samsung rolled out recently. However when I flashed the stock firmware I found that the screen no longer worked. The phone seemed to boot up and play the samsung startup jingle but no splash logo. just a black screen. To test I decided to call it and the call came through ok and answered with the home button, speech all functional???!! Just no screen ... completely black??? Would this likely be a fault with the firmware or is it just uncanny timing with a faulty screen??? confused and wondered if anyone else has come across this before I go but a new screen. I downloaded the firmware from hotfile "I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME"
thanks in advance

jamhot said:
Hi people. I have been running a rooted phone for a while and decided to go back to unrooted recently. I decided I would like to use the barclays app and apply the new updates that samsung rolled out recently. However when I flashed the stock firmware I found that the screen no longer worked. The phone seemed to boot up and play the samsung startup jingle but no splash logo. just a black screen. To test I decided to call it and the call came through ok and answered with the home button, speech all functional???!! Just no screen ... completely black??? Would this likely be a fault with the firmware or is it just uncanny timing with a faulty screen??? confused and wondered if anyone else has come across this before I go but a new screen. I downloaded the firmware from hotfile "I9505XXUDMH8_I9505OXXDMHA_I9505XXUDMH8_HOME"
thanks in advance
Click to expand...
Click to collapse
i would say to stay away from new firmwares at this time....you are stuck in the locked bootloader.
can you boot in recovery or odin modes and see the screen?
wipe data and cache and reflash the MH8 then do the wipe. see if that works
can not determine if it is a HW or SW issue.
if you want to use app that doesnt require root like Barcley and you are rooted, you can hide the root with some available app.

It seems I am able to get the device into download mode, although nothing comes on the screen. I just have to do the procedure blind. No matter what I do nothing comes up. It also seems I can only get the phone to read the internal memory through USB once a flash procedure has completed. It seems to force a boot up but when I try to restart manually it does nothing but vibrate and only seems to be able to put into download mode while blind. I find it very unusual that the screen should suddenly stop working the moment I try and flash the standard firmware. Getting worried now. nothing seems to work

Can anyone help here??? I have tried flashing several times. Just vibrates and does nothing. I can get it into download mode but I don't get any warning screen up. I just go through the button combo's blind and it manages to get into communication with a odin com port. I have tried doing a PIT download. What I was then finding is that the phone can bring up a recovery screen with option to reset, I reset but the phone will just be a black screen and play the samsung start jingle without the splash screen. It then seems to boot and receive notifications with a totally black screen. completely unresponsive.

If you can't see a splash screen or even recovery and download mode screens, then I'd say its a hw issue and no ROM is going to fix it, because those mentioned things are not even tied to the ROM.
Your screen has broken some how, it could be as simple as a flexi connector falling out or as bad as your screen being totally gone.
Sent from my GT-I9505 using xda app-developers app

It doesn't look like hardware problem
i am facing exactly similar situation with a 9505, i tested LCD with another of my 9505, and LCD is ok
is just happened after an Odin flash of stock firmware.

Related

[Q] Phone unresponsive randomly

Hi guys, something strange happened, got my nexus 3 weeks ago and i right away unlocked bootloader, flashed custom recovery and rooted it, installed a few apps and everything was fine, day before yesterday while sending an email my phone got stuck and rebooted, took awhile and when it did i noticed the cell network being empty, i would press anything on the screen and it would do the same. So i downloaded the stock images and flashed everything according to section D of the topic http://forum.xda-developers.com/show....php?t=2010312 and boot took awhile finally it started and i got the welcome screen, clicked on English USA and again the cell network is empty and phone frooze in the first screen only, it rebooted and it boots up with a black screen and i get the message "process system isn't responding, OK or wait" and press ok or wait whichever and phone reboot or even if i try to press any of the options, its stuck. But bootloader works since i can do fastboot devices or fastboot reboot-bootloader, i can also boot into recovery which is CMW. This is getting frustrating and im confused, can anyone help me out here? Thanks
RMA time. Relock the bootloader and ship her off. If reloading the stock images doesn't fix it, it's likely hardware.
estallings15 said:
RMA time. Relock the bootloader and ship her off. If reloading the stock images doesn't fix it, it's likely hardware.
Click to expand...
Click to collapse
Isn't there anything else i can try before shipping it back or give up?
EDIT:
I pushed CM zip file via adb and it got pushed successfully and i even flashed it via CMW recovery and it even said complete and when i reboot the device its stuck on the Google screen and nothing else happens..
masantula said:
Isn't there anything else i can try before shipping it back or give up?
Click to expand...
Click to collapse
Gong back to all stock software with fresh flashes is the most extreme attempt at a fix, software wise. What else would you do?
Hmmm, true...this sucks, no other option...thanks

Black screen, only vibration

hi,
I had this phone bought with a black screen problem.
The phone is always black, it has LED activity, when charging, also it vibrates and BACK and MENU lights comes up.
the device boots up because I can hear the music when booting, and also it respond when I touch it, but the sound comes with static and when a SIM card is on, no calls goes by it.
The device was OK but a guy tried to root it with CASUAL root and TWPR recovery and bricked the device.
Any suggestion?
This seems like a software issue to me, because it was made only by flashing some files with odin.
FIRMWARE
ellokomen said:
hi,
I had this phone bought with a black screen problem.
The phone is always black, it has LED activity, when charging, also it vibrates and BACK and MENU lights comes up.
the device boots up because I can hear the music when booting, and also it respond when I touch it, but the sound comes with static and when a SIM card is on, no calls goes by it.
The device was OK but a guy tried to root it with CASUAL root and TWPR recovery and bricked the device.
Any suggestion?
This seems like a software issue to me, because it was made only by flashing some files with odin.
Click to expand...
Click to collapse
Well is pretty hard to help u if u don't know which firmware it was on before? Here from RockRatt thread when he released modem/baseband base on ATT MODEM THAT WAS RELEASED ......hope this help u figure it out around when this phone bought and release with what kinda firmware it was install before........but u can always ODIN to STOCK from this thread......... MDB/MDL..........MF3 & MK2.........Hope this help u .....goodluck.....PM me if u need more help......:good:
ATT MK2 @ 11-28-2013
ATT MJ9 @ 11-14-2013
.
ATT MJ6 @ 10-24-2013
ATT MF3 @ 7-9-2013
ATT MDL @ MAY? 2013
ATT MDB @ APRIL? 2013 Came with Release of phone
Sounds like a hardware issue...
I broke the LCD on mine, but still had everything working with no visible screen. None of the stuff you described corresponds to a brick and cannot cause this issue.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I think it must by a software issue, I have seen this same behavior on other thread but the person with the solution always sent a PM to anyone in need of help and the solution was never released to the public.
Now the person doesn't appear to be active on the forum, that's why I posted this.
This is the thread http://forum.xda-developers.com/showthread.php?t=2324965
Same behavior: Black screen, LED flashing and vibrating and connectivity on the PC ( I can even use KIES and MTP )
If someone has the solution or suggestion please I would really appreciate it, this phone is mint and just bought.
If you can use Kies, try to use the emergency recovery. It may fail. But worth a shot. If that fails, grab the MF3 Odin files and try those, if this fail, go get the MK2 update.zip. That will likely work if the other 2 options fail. But, that has to be flashed in the stock recovery... It would not be hard to do if someone can post the exact button presses needed to flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I tried KIES recovery, that was my first option, KIES sees everything OK, it even updated to the last version of AT&T (lol) but still the same symptoms.
Now I'm trying all kind of stuffs with odin, the guy that bricked it told me he ticked "NAND ERASE ALL" in Odin because it was needed to root the device according to him.
I can get to download mode with battery Pulled, VOL DOwn Pressed while inserting battery, 5 sec after first vibration I pres Vol UP and then the PC grabs it and it appears in ODIN.
But when I press Vol Down to go to Recovery to try to get ADB working (because it is not enabled in the developer debugging) , the recovery fails and the device restarts, So I guess the recovery is broken no matter what ROM or recovery I put (tried with Stock and MJ6 recovery, no success so far)
That is a hardware issue then. If nothing is coming up on the screen in recovery or download mode, it is not software related.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Do you see knox warranty counter in download mode? If yes then you are on mf3 or later. If that's the case then follow the thread with mf3-emergency-parts 1 and 2. I'm thinking it's a software issue based on what caused the soft brick. Good luck
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Yeah, I tried everything so far and nothing seems to work (I could put it on recovery but no screen whatsoever)
Tomorrow I'm going to take it to repair service, it seems to me something deep is broken, like a driver for the display or something else.
The last step I wanted was to put it in qualcomm usb mode to erase everything in the internal memory and then using the qualcomm recovery for I9505 variants, reinstall the bootloader and at least, have it in download mode; but I can't find any way to put it in this qualcomm usb mode (QHSUSB) if anyone knows how to do this without disassembling the phone that would be great.
Thanks everyone for the help.
I'm telling you... It is not software related... All three things (OS, Download, and recovery) display absolutely nothing it is a hardware failure.
Here is what I want you to do. Turn the device on to any mode. Then shine a flashlight onto the screen. See if you can see any image. If so, the back lights are faulty, if not, you may see hairline cracks in the LCD. If this is the case, you will need to replace the LCD/Digitizer assembly.
Bottom line, it is not a software related issue.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
I'm telling you... It is not software related... All three things (OS, Download, and recovery) display absolutely nothing it is a hardware failure.
Here is what I want you to do. Turn the device on to any mode. Then shine a flashlight onto the screen. See if you can see any image. If so, the back lights are faulty, if not, you may see hairline cracks in the LCD. If this is the case, you will need to replace the LCD/Digitizer assembly.
Bottom line, it is not a software related issue.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly.

Phone still gets stuck in boot loop after flashing stock firmware

I have a TMobile/MetroPCS GS4 model SGH-M919N that got stuck in a boot loop last week. I was finally able to find working firmware last night and used Odin to flash. Once it got to PASS my phone automatically rebooted with the blue recovery boot text in the top left, but then it just went back into a boot loop. I tried all other firmwares and none of them got to 100% so now I don't know what else I can do.
I have the same issue on a GT-i9505. I was using my phone this evening when it randomly rebooted and just keep rebooting until I removed my battery. After that, it was dead . Flashing stock firmwares like shooting a minigun and nothing works. Smells like a hard brick?
alesu69 said:
I have the same issue on a GT-i9505. I was using my phone this evening when it randomly rebooted and just keep rebooting until I removed my battery. After that, it was dead . Flashing stock firmwares like shooting a minigun and nothing works. Smells like a hard brick?
Click to expand...
Click to collapse
Have you tried replacing the battery? I figured I would try that but I havent gotten around to it yet
Not yet, i have no spare battery. Looks like when i plug the charger my phone just vibrates, like it's rebooting, and it's not showing anything. I found a similar issue here: http://forum.xda-developers.com/showthread.php?t=2532447
Looks like one guy did solve his problem.
*need to mention that by dead I mean it shows the "Samsung Galaxy S4 GT-I9505" logo and also shows "RECOVERY BOOTING", even though I didn't enter in recovery mode. Looks like now it doesn't shows anymore "RECOVERY BOOTING", but still, it doesn't boot. I was able to flash firmwares via odin and kies, but still no luck.
LE: It start booting by.. magic, i got to samsung boot logo, but that's all, crashed again.
After flash with Odin, immediately boot into recovery, perform a factory wipe, and reboot.
The problem is it doesn't boot into recovery.
LE: I managed to flash twrp via odin and boot into recovery, but i have an error:
"Unable to mount /data"
Any ideas?
LE2: Everything is useless, i managed to flash the rom, manage to boot into the rom, but then it will still reboot (which it did). Next step will be maybe to disassemble and clean all contacts.
alesu69 said:
The problem is it doesn't boot into recovery.
LE: I managed to flash twrp via odin and boot into recovery, but i have an error:
"Unable to mount /data"
Any ideas?
LE2: Everything is useless, i managed to flash the rom, manage to boot into the rom, but then it will still reboot (which it did). Next step will be maybe to disassemble and clean all contacts.
Click to expand...
Click to collapse
How did you manage to get into recovery?
harary said:
How did you manage to get into recovery?
Click to expand...
Click to collapse
Yes, but if I leave my phone in recovery (stock or custom), it just either freezes, either reboots, even though i don't do anything, just let it idle.
I can't manage to boot into the ROM 'cause eventually it will reboot. I couldn't finish the setup wizard.
OK so I don't know if this helps, but I managed to at least get past the "blue recovery boot" part. When the phone vibrated I let go of the power while still holding home + vol up, and I managed to get to the android guy with a blue progress bar below him. My phone shut off as the progress bar got 80-90% but now I know it's not impossible to start recovery.
Well, nothing works. After flashing pit file, an 4.4.2 odin prerooted image from here, cf auto root and then twrp, it will still randomly reboot. I manage to get past the boot logo into setup wizard, but phone just freezes after a couple of minutes, can't finish the setup wizard. Also, if i idle in twrp it will reboot sooner or later, tested already.I left my phone idling in twrp just to recharge my battery.
At least i have no more "unable to mount /data" errors.
I finally got it to work, all I had to do is keep flashing twrp and stock firmware back and forth. But it is just one problem after another with this thing, the problem now is every 5 minutes it will freeze and restart, also it tells me there is no sim even though it worked the first time i put it back in.
Operation Ivy said:
I finally got it to work, all I had to do is keep flashing twrp and stock firmware back and forth. But it is just one problem after another with this thing, the problem now is every 5 minutes it will freeze and restart, also it tells me there is no sim even though it worked the first time i put it back in.
Click to expand...
Click to collapse
What do you mean with back and forth?
harary said:
What do you mean with back and forth?
Click to expand...
Click to collapse
It means he flahsed and reflashed many times until he got lucky and it worked. That's what happened to me also. But i have the same issue, phone reboots or freezez after a couple of minutes, even though everything else is installed properly.
Dude, we have the same issue. Btw, is this happening to you too? Like, now and then when the phone freezes, that the screen is turning to a bright yellowish green?
I know a friend who repairs phone hardwares for a living, i gave it to him, i'll let you know how this went.
alesu69 said:
It means he flahsed and reflashed many times until he got lucky and it worked. That's what happened to me also. But i have the same issue, phone reboots or freezez after a couple of minutes, even though everything else is installed properly.
Dude, we have the same issue. Btw, is this happening to you too? Like, now and then when the phone freezes, that the screen is turning to a bright yellowish green?
I know a friend which repairs phone hardwares for a living, i gave it to him, i'll let you know how this went.
Click to expand...
Click to collapse
I got several times into Recovery Mode now, flashed several ROMs. I had no issues with freezing, especially not in TWRP Recovery Mode. But sometimes if i am trying to go into Recovery Mode or i just want to start ROMs, the screen turns into yellow behind the Samsung logo. If i dont take out the battery this wents into a complete white, but nothing happens.
Yes please tell if you got some news..
guys its not hard bricked its a problem wiht your power button
my friend had the same issue and then i killed the battery by letting it keeep bootlooping
then plugged it in and let it charge to around 10% and booted it
just try to press the power button slowly
Joashrox said:
guys its not hard bricked its a problem wiht your power button
my friend had the same issue and then i killed the battery by letting it keeep bootlooping
then plugged it in and let it charge to around 10% and booted it
just try to press the power button slowly
Click to expand...
Click to collapse
But it is sure that the power button is working because i get this blue "recovery booting". Or am i wrong?
So.... bad news, the guy whom i gave the phone to said that it's a short on the motherboard and there's nothing he can't do other than changing the motherboard. If you guys found another solution and that guy is mistaking, let me know.
alesu69 said:
So.... bad news, the guy whom i gave the phone to said that it's a short on the motherboard and there's nothing he can't do other than changing the motherboard. If you guys found another solution and that guy is mistaking, let me know.
Click to expand...
Click to collapse
Replace power button to new one. I have the same problems with s3 and this works. Try it.
Sent from my GT-I9300 using XDA-Developers mobile app
My phone is dead, it's not even charging anymore. The guy whom I give it to said it's a short on the motherboard. You guys managed to solve something with your phones? Or still a dead end?
alesu69 said:
My phone is dead, it's not even charging anymore. The guy whom I give it to said it's a short on the motherboard. You guys managed to solve something with your phones? Or still a dead end?
Click to expand...
Click to collapse
If You can't charge phone... Yup, motherboard is died. If You plug the charger and see something this have to be button but if You plug charger and don't see anything this is motherboard.

SGS4 SGH-i337 boot loop. No recovery mode. ODIN works/sees phone...

I unplugged my wife's phone from its charger today and BAM boot loop occurs. No idea why. Of course she blames me cause I touched it and it breaks. Haha. So I tried pulling the battery no good. I attempted recovery mode and selected factory reset which after it did its reset the phone rebooted still in boot loop but now I cannot get into recovery mode. It just freezes or reboots when I attempt recovery mode. I just get the "recovery booting" message and then either phone reboots or it freezes. It is an AT&T SGH-i337 with lollipop on it. I spent about 4 hours sifting through XDA forums trying various methods using ODIN like here http://forum.xda-developers.com/showthread.php?t=2616221 and here http://forum.xda-developers.com/showthread.php?t=2407443 and here http://forum.xda-developers.com/showthread.php?t=2573080 but problem persists. At this point I could use a little help from the community. Maybe some down to earth help that can point me into the right direction or the right files to download and try. Currently I can put the phone into download mode and my computer recognizes it and ODIN sees it just fine. I've witnessed some crazy screen stuff like the matrix happening when I turn it on. Its weird. Sometimes when I turn it on and it sits at the Samsung Logo the background slowly turns green and gets all pixelated. It is very bizarre. Maybe that might tell you something. I'd really just like the stock rom back on whatever that may be. It was on stock but had been rooted using Kingroot a while back. At this point I'd prefer any rom, Kitkat or lollipop, CM I don't care. I just want the phone functioning.
JDubbed said:
I unplugged my wife's phone from its charger today and BAM boot loop occurs. No idea why. Of course she blames me cause I touched it and it breaks. Haha. So I tried pulling the battery no good. I attempted recovery mode and selected factory reset which after it did its reset the phone rebooted still in boot loop but now I cannot get into recovery mode. It just freezes or reboots when I attempt recovery mode. I just get the "recovery booting" message and then either phone reboots or it freezes. It is an AT&T SGH-i337 with lollipop on it. I spent about 4 hours sifting through XDA forums trying various methods using ODIN like here http://forum.xda-developers.com/showthread.php?t=2616221 and here http://forum.xda-developers.com/showthread.php?t=2407443 and here http://forum.xda-developers.com/showthread.php?t=2573080 but problem persists. At this point I could use a little help from the community. Maybe some down to earth help that can point me into the right direction or the right files to download and try. Currently I can put the phone into download mode and my computer recognizes it and ODIN sees it just fine. I've witnessed some crazy screen stuff like the matrix happening when I turn it on. Its weird. Sometimes when I turn it on and it sits at the Samsung Logo the background slowly turns green and gets all pixelated. It is very bizarre. Maybe that might tell you something. I'd really just like the stock rom back on whatever that may be. It was on stock but had been rooted using Kingroot a while back. At this point I'd prefer any rom, Kitkat or lollipop, CM I don't care. I just want the phone functioning.
Click to expand...
Click to collapse
Assume that you do not have any hardware issue.
Charge the phone.
First try the 10 sec methods to see whether you can go to recovery mode.
Press power button + home +volume up for 10 sec. when the phone vibrate release the power button but keep pressing the home and volume up until you see the recovery message.
If you can get into recovery but you can not revive the phone or you can not go into recovery at all, you need to flash the firmware via odin.
the only odin flashable firmware for lollipop phones are the kit-kat NB1 firmware cooked by Muniz_ri. You can get the file from here.
Muniz_ri cooked the firmware such a way that you can use towel root to root it.
Let see that fix your problem first.

Turned this phone into a brick and I need to fix it!

Hi, so, I got this phone from a friend, and he told me that the phone was working prorperly, but after someone factory resetted it, he wasn't able to set it up. Constant force close pop-ups where showing up while setting it up, and you weren't able to accept terms and conditions (button grayed out). Also, one thing I noticed. The phone got into "Factory Mode". Idk what that is, but it wouldn't let me to enable wifi or bluetooth. That little Factory mode thingy got me really confused. Also, I wanted to boot into recovery mode, and I wasn't able to do so. After turning the phone off, and doing the key combo to boot into recovery, the phone rebooted itself (very showrtly after doing the startup vibration) and after that, it seemd to get into recovery, but it stayed at the android logo with an exclamation sign and after 3 seconds it rebooted itself to system.
After that I said, "well, last thing to try is flashing stock rom again". And I did so. Using the Frija software to download the latest version of android for this phone (and using the corect CSC for this phone (CTI)). I used odin 3.12.7 (wich I knew it works because of previously using it with other phones) to flash the stock rom again. I made sure that only Auto-reboot and F.reset time were checked, and started flashing. After it finished, it got to the samsung logo, but got stuck there. Nothing happened (I left the phone there for like 30 min). I decided to hard-reboot the phone and try to factory-reset it, but after shutting it down, it started to be really hard to make the phone turn on. I had to unplug the battery and wait like 10 mins to try again, and I still wasnt able to boot into recovery mode. It just got stuck at the "Galaxy Core 2" logo.
After that first boot, the phone never got passed the "Galaxy Core 2" logo. Just stuck there. After that, things just begun to get worse. It was also hard to get the phone to get into download mode, most of the time it just stayed at a blackscreen (im not shure if the phone ever turned on, but it never vibrated) and did nothing. I decided to try other versions of odin. Tried with 3.09 and 3.04. Nothing, and after every flash, it got harder and harder to make the phone boot.
At this point, I can hardly get the phone into download mode, and if I do so, sometimes I get the odin complete write operation failed error, wich the only way that I've found to solve it is to reboot again the phone into download mode.
I know that the battery is working, I have another core 2 (same exact model) and battery is ok. At this moment I don't know what else to do. Please, help me to get this brick of a phone back to working conditions, I dont want my friend to buy a new phone just to use it to recive calls and charge it.
Some extra notes:
As i've read, sometimes this can be caused by the replacement of the digitizer/screen. This phone seems to have one or both of them replaced, since I can see glue residues on the corners of the glass, where it touches with the plastic frame.
If there is anything hardware related thing to try, I can try to open the phone. I have some experience doing so.
EDIT: As I continued reading through this forum, I found out that some people had luck with Odin3_v3.13.1_3B_PatcheD, so I decided to try it out and see. Still, nothing changed. As today, I can only use this phone to charge the battery (it dosent actually show the percentage, only the battery icon with a loading icon inside) and boot into download mode
Although, I have to say that after flashing the stock rom with that version of odin made the phone not that hard to start in download mode. I think that it could be something that got corrupted on the eMMC module and it has to repartition it all again...? Does anyone know how to do so?
Regards
Well, tried almost everithing I know. Downloaded rom again with binary nature, tried with odin version 3.12.7, 3.13.1_3b patched and 3.13.3, but nothing. Extracted the PIT file from the CSC file, did repartition, NAND wipe, and nothing changed. I have to say that its certaily easier to get the phone in download mode, but thats almost it. One thing to note, when i select the NAND wipe, it dosent seems to do anything. I mean, in odin Log screen some things appear related to NAND wiping and such, but its really fast and there are only 2 or 3 lines dedicated to that. Is that OK?
Anyway, please, any recoomendation or thing to try would be great, since this phone is now trash, it dosent matters if it starts to get worse, or even unusable (more than it is rn).
Regards

Categories

Resources