Has anyone got helium working with the verizon lg g2? I can't seem to get the pc app to see the phone how it needs to. When i try to run the msi installer in tools i get a network error for some reason.
jpayne97 said:
Has anyone got helium working with the verizon lg g2? I can't seem to get the pc app to see the phone how it needs to. When i try to run the msi installer in tools i get a network error for some reason.
Click to expand...
Click to collapse
Do you have USB Debugging enabled? Are you using MTP when you connect the cable? If so you can't. You need to change it from MTP and use Internet and then Ethernet. Once you do that you should see USB Debugging pop up in your notification bar. Once you see that you should be able to use helium.
emplox said:
Do you have USB Debugging enabled? Are you using MTP when you connect the cable? If so you can't. You need to change it from MTP and use Internet and then Ethernet. Once you do that you should see USB Debugging pop up in your notification bar. Once you see that you should be able to use helium.
Click to expand...
Click to collapse
Thanks. That did it!
jpayne97 said:
Thanks. That did it!
Click to expand...
Click to collapse
cool, np
Related
I can connect the i9000 to my PC using mass storage mode and see it as an USB disk, but it doesn't work on my Mac, it recognize nothing (I have chosen to mount the drive after connected to the USB as I did the same when connecting to Windows). I can see there is a Samsung USB device connected in the System Profiler but the disk won't mount, any clues?
Thanks.
I have the very same problem. Works in PC, not on my iMac.
You need to enable USB debugging and after that it will work.
Jausse said:
You need to enable USB debugging and after that it will work.
Click to expand...
Click to collapse
Yep. Speaking as a Mac OS X user I can confirm this works.
The is no way to flash from a Mac though. However, I have high hopes for ROM Manager
Jausse said:
You need to enable USB debugging and after that it will work.
Click to expand...
Click to collapse
May I know how this thing done? On the Mac or on the phone and the location? Thank you!
I got it:
Settings > Application > Development
Sent from my GT-I9000 using XDA App
Of course it's to be done on the phone. Sorry, I should have been more specific.
I've enabled USB Debugging and can't get my mac to recognize my phone to use it as a USB storage device?!?! I'm running ICS 4.0.3 XXLPB. I didn't have any problem at first with GB. Any suggestions? Thanks! =)
EDIT: Silly me, wrong forum my phone is i9100.... Still would appreciate any help.
I used to connect my mobile to my laptop using usb but now a days when I connect it only the phone enters the charging mode ..the usb mode connection has disappeared..
I used to connect my phone to myphoneexplorer software using debugging mode..
Please help.
Sent from my GT-I5801 using XDA App
neo1691 said:
I used to connect my mobile to my laptop using usb but now a days when I connect it only the phone enters the charging mode ..the usb mode connection has disappeared..
I used to connect my phone to myphoneexplorer software using debugging mode..
Please help.
Sent from my GT-I5801 using XDA App
Click to expand...
Click to collapse
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
zenza86 said:
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
Click to expand...
Click to collapse
Thanks a lot.. worked..!!!
neo1691 said:
Thanks a lot.. worked..!!!
Click to expand...
Click to collapse
you're welcome...
Help!
I rooted my Galaxy 3 and since then i can only connect and transfer data between my phone and my computer by allowing USB debug mode. It used to work without a driver installed on my pc (only data transfer mode like with a pendrive), but now my laptop (which doesn't have Kies on it) doesn't recognize it. I tried it with my TV and it said "unsupported USB device". It used to work as a pendrive but now nothing recognizes it:---( Please help:-C
zenza86 said:
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
Click to expand...
Click to collapse
Thank you very much!!!
I had this problem today and the first thing I did is what you said... and it worked!
TKS
Linkakos said:
I rooted my Galaxy 3 and since then i can only connect and transfer data between my phone and my computer by allowing USB debug mode. It used to work without a driver installed on my pc (only data transfer mode like with a pendrive), but now my laptop (which doesn't have Kies on it) doesn't recognize it. I tried it with my TV and it said "unsupported USB device". It used to work as a pendrive but now nothing recognizes it:---( Please help:-C
Click to expand...
Click to collapse
Well, you've tried what they said above? About the code and be sure of the UART and USB mode are enabled in PDA? Let us know if you tried.
ya i tried it... worked well!!
USB
Hi to all!
I have a similar problem pls help. I haven't had this before. When I connect to the computer (USB) the phone screen is just blinking with a message INITIALIZATION, and can't connect. Not even in developer mode. And I also tried this *#7284#. Still the same not working. I'll appreciate your help.
Oldfrog said:
Hi to all!
I have a similar problem pls help. I haven't had this before. When I connect to the computer (USB) the phone screen is just blinking with a message INITIALIZATION, and can't connect. Not even in developer mode. And I also tried this *#7284#. Still the same not working. I'll appreciate your help.
Click to expand...
Click to collapse
do u MOUNT your sd card from the notifications bar after connecting your usb???
Neo
Hi! There is no notification bar on the phone screen, because it's blinking. Or you mean this notification should be on the computer?
Thank you in advance!
Oldfrog said:
Hi! There is no notification bar on the phone screen, because it's blinking. Or you mean this notification should be on the computer?
Thank you in advance!
Click to expand...
Click to collapse
Do you mean that the usb initialisation is on when you connect the usb to the computer...
What mode is the usb on?
Eg samsung kies, mass storage etc?
Sent from my GT-I5801 using XDA App
Sorry but there was no notification bar on the phone. Or you mean I should do something on the pc? Now I can connect, but I had to format my sd card. Thank you for your replay!
Oldfrog said:
Sorry but there was no notification bar on the phone. Or you mean I should do something on the pc? Now I can connect, but I had to format my sd card. Thank you for your replay!
Click to expand...
Click to collapse
What he is trying to say, is wich is the default action when you connect the USB.
Example: every time that you connect the USB the phone gets into Kies mode, or Mass Storage.
My G3 is configured to ask what to do...
welty said:
What he is trying to say, is wich is the default action when you connect the USB.
Example: every time that you connect the USB the phone gets into Kies mode, or Mass Storage.
My G3 is configured to ask what to do...
Click to expand...
Click to collapse
U should find it in settings> about phone> usb settings
Sent from my GT-I5801 using XDA App
Well my phone isn't connecting to my PC with USB for some reason... it doesn't detect it. Press on disk drive, wait a few seconds and no F drive is appearing.
I'm using Rafdroid.
Suggestions>?
Did phone detects on bootloader mode or magldr Flash USB mode?
datas0ft said:
Did phone detects on bootloader mode or magldr Flash USB mode?
Click to expand...
Click to collapse
Pretty much
I have Windows 7 on my PC. Sometimes when inserting the micro usb into my HD2, it attempts to install ADB or something and fails.
Anybody know how this could happen? It was working well.
Install DroidExplorer to your pc. It should have all the necessary drivers etc
ClydeB1 said:
Install DroidExplorer to your pc. It should have all the necessary drivers etc
Click to expand...
Click to collapse
Both pass through and droid explorer work. But I can't seem to get access to my SD. And it's inserted correctly.. can even see the stats of it on the phone.
USB debugging should always be enabled right?
carazy1 said:
Both pass through and droid explorer work. But I can't seem to get access to my SD. And it's inserted correctly.. can even see the stats of it on the phone.
USB debugging should always be enabled right?
Click to expand...
Click to collapse
anyone ?
Edit: Had to go in device manager and such.. problem solved.
My unroot, unmodified Nexus 4 is cannot be detected by any PC or Mac I plug it into. There are no notification on Windows or in my Phone. Before, my PC can detect it as a camera or media device whichever I prefer. I even installed the ADB driver to make Helium work.
My recent installed apps are Helium and Cerberus. I don't know if one of these apps causes the problem. Before this thing happened, when I plug my phone to my PC it states as "Charging (USB)" but now it's just charging.
jez1209 said:
My unroot, unmodified Nexus 4 is cannot be detected by any PC or Mac I plug it into. There are no notification on Windows or in my Phone. Before, my PC can detect it as a camera or media device whichever I prefer. I even installed the ADB driver to make Helium work.
My recent installed apps are Helium and Cerberus. I don't know if one of these apps causes the problem. Before this thing happened, when I plug my phone to my PC it states as "Charging (USB)" but now it's just charging.
Click to expand...
Click to collapse
do you want to transfer files or do you want to root it?
mitsos1996 said:
do you want to transfer files or do you want to root it?
Click to expand...
Click to collapse
i'll just transfer files
USB debugging is on?
playya said:
USB debugging is on?
Click to expand...
Click to collapse
no there is no need just connect your phone to pc . it should probably recognise it i think so.
mitsos1996 said:
no there is no need just connect your phone to pc . it should probably recognise it i think so.
Click to expand...
Click to collapse
Usb debugging on or off. Any pc cannot detect it. Mtp, ptp. Lo luck. Its working perfectly before though.
jez1209 said:
Usb debugging on or off. Any pc cannot detect it. Mtp, ptp. Lo luck. Its working perfectly before though.
Click to expand...
Click to collapse
i think 1st you should try unistalling any previous drivers to do this follow this http://www.pcworld.com/article/246041/how_to_uninstall_drivers_in_windows.html and then connect it again . I had a same problem once and i did this.If it does not work you have to ask someone more expert.
Thanks but i already did this. In fact any pc in the offixe cannot detect this phone. Even those dont have a driver. I believe u dont need a driver for PTP or MTP since windows already has a driver for that.
Have an A20 that isn't recognised by any computer. Did that *#08# thing to change the settings, still won't connect. Is there away I could fix this?
I am having this problem, did you find a way to fix it?
Phoenix577 said:
I am having this problem, did you find a way to fix it?
Click to expand...
Click to collapse
Sorry so far I have not found any solution to this nor has anyone reached out with one. I don't know if we both will get help on this
gaara22 said:
Have an A20 that isn't recognised by any computer. Did that *#08# thing to change the settings, still won't connect. Is there away I could fix this?
Click to expand...
Click to collapse
Can you tell me what happened
what did you do ?
maybe i can help you
chinitopex said:
Can you tell me what happened
what did you do ?
maybe i can help you
Click to expand...
Click to collapse
Every since the phone was purchased, it was never recognised by any computer. I tried those methods that they said would cause it to be recognised and it still would not work with it.
gaara22 said:
Every since the phone was purchased, it was never recognised by any computer. I tried those methods that they said would cause it to be recognised and it still would not work with it.
Click to expand...
Click to collapse
So your phone is working, can you charge the battery without problems?
chinitopex said:
So your phone is working, can you charge the battery without problems?
Click to expand...
Click to collapse
Yes, it is working and charging without any problems. I just cannot connect it to the computer to transfer files and so forth.
gaara22 said:
Yes, it is working and charging without any problems. I just cannot connect it to the computer to transfer files and so forth.
Click to expand...
Click to collapse
You can conected the a20 on mode adb??
You can replace the charging port
it is not too expensive
chinitopex said:
You can conected the a20 on mode adb??
You can replace the charging port
it is not too expensive
Click to expand...
Click to collapse
Not even on adb mode would it connect. The charging port would cause that? When you plug it into the computer, it usually gives that unrecognised device error.
gaara22 said:
Not even on adb mode would it connect. The charging port would cause that? When you plug it into the computer, it usually gives that unrecognised device error.
Click to expand...
Click to collapse
You can replace the charging port
it is not too expensive
Try this:
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
If that dosen't help try enabling DEVELOPER options and on "Default USB Configuration" choose "FIle Transfer"
chinitopex said:
I will try that You can replace the charging port
it is not too expensive
Click to expand...
Click to collapse
SerbianGeekster said:
Try this:
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
If that dosen't help try enabling DEVELOPER options and on "Default USB Configuration" choose "FIle Transfer"
Click to expand...
Click to collapse
I did try in drivers installation but it didn't work. I will try the developer option
SerbianGeekster said:
Try this:
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
If that dosen't help try enabling DEVELOPER options and on "Default USB Configuration" choose "FIle Transfer"
Click to expand...
Click to collapse
I did try in drivers installation but it didn't work. I will try the developer option
SerbianGeekster said:
Try this:
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
If that dosen't help try enabling DEVELOPER options and on "Default USB Configuration" choose "FIle Transfer"
Click to expand...
Click to collapse
That actually helped. Thank you.
gaara22 said:
I did try in drivers installation but it didn't work. I will try the developer option
That actually helped. Thank you.
Click to expand...
Click to collapse
Glad to help.
Second method is one that worked right?
SerbianGeekster said:
Glad to help.
Second method is one that worked right?
Click to expand...
Click to collapse
Yes it was the second option that you posted.