Well my phone isn't connecting to my PC with USB for some reason... it doesn't detect it. Press on disk drive, wait a few seconds and no F drive is appearing.
I'm using Rafdroid.
Suggestions>?
Did phone detects on bootloader mode or magldr Flash USB mode?
datas0ft said:
Did phone detects on bootloader mode or magldr Flash USB mode?
Click to expand...
Click to collapse
Pretty much
I have Windows 7 on my PC. Sometimes when inserting the micro usb into my HD2, it attempts to install ADB or something and fails.
Anybody know how this could happen? It was working well.
Install DroidExplorer to your pc. It should have all the necessary drivers etc
ClydeB1 said:
Install DroidExplorer to your pc. It should have all the necessary drivers etc
Click to expand...
Click to collapse
Both pass through and droid explorer work. But I can't seem to get access to my SD. And it's inserted correctly.. can even see the stats of it on the phone.
USB debugging should always be enabled right?
carazy1 said:
Both pass through and droid explorer work. But I can't seem to get access to my SD. And it's inserted correctly.. can even see the stats of it on the phone.
USB debugging should always be enabled right?
Click to expand...
Click to collapse
anyone ?
Edit: Had to go in device manager and such.. problem solved.
Related
So just recently my usb and sd card decided to malfunction. My usb will charge via my pc but it comes up on the pc (Vista 32bit) as 'Windows cannot recognise this device' my drivers are up to date. However in my device management i did notice that my 'Mobile Device's' section had gone
I also tried formatting my sd card using a card reader, but it wont format it
I want to flash a new ROM, any way of doing it without an activesync connection? i managed to get the NBH image on my sd card by using another storage card but i still couldnt establish an activesync connection.
Any help would be much appreaciated as this is driving me crazy
Thanks, Dan.
DanMccoy1 said:
So just recently my usb and sd card decided to malfunction. My usb will charge via my pc but it comes up on the pc (Vista 32bit) as 'Windows cannot recognise this device' my drivers are up to date. However in my device management i did notice that my 'Mobile Device's' section had gone
I also tried formatting my sd card using a card reader, but it wont format it
I want to flash a new ROM, any way of doing it without an activesync connection? i managed to get the NBH image on my sd card by using another storage card but i still couldnt establish an activesync connection.
Any help would be much appreaciated as this is driving me crazy
Thanks, Dan.
Click to expand...
Click to collapse
Just checking, you did update your usb drivers according to this guide?
Otherwise, do you not have access to another pc?
You can also try this solution, it helped another user earlier
ClydeB1 said:
Just checking, you did update your usb drivers according to this guide?
Otherwise, do you not have access to another pc?
Click to expand...
Click to collapse
Yes i used that guide.
I have another pc and another laptop
seems to be doing exactly the same
i figured its a hardware config in my phone but i dont know how to sort it out so i need to flash a new rom somehow lol
i've tried my other usb lead too, but they both charge but wont connect to activesync or disk drive =\
DanMccoy1 said:
Yes i used that guide.
I have another pc and another laptop
seems to be doing exactly the same
i figured its a hardware config in my phone but i dont know how to sort it out so i need to flash a new rom somehow lol
i've tried my other usb lead too, but they both charge but wont connect to activesync or disk drive =\
Click to expand...
Click to collapse
I just edited my post above, another user came right by going to Settings\Connections\USB to PC and unticked the Enable fast data transfers.
ClydeB1 said:
I just edited my post above, another user came right by going to Settings\Connections\USB to PC and unticked the Enable fast data transfers.
Click to expand...
Click to collapse
Already tried that, just tried again and reset the device, still no luck
The Error message im recieving is:
'USB Device Not Recognised
One of the USB devices attatched to this computer and had malfunctioned, and windows does not recognise it.'
DanMccoy1 said:
Already tried that, just tried again and reset the device, still no luck
The Error message im recieving is:
'USB Device Not Recognised
One of the USB devices attatched to this computer and had malfunctioned, and windows does not recognise it.'
Click to expand...
Click to collapse
Have you tried a simple thing like rebooting the pc? That sounds however more like a hardware issue on the pc or phone. What happens if you plug another usb device into the port eg a usb flash drive, does that pick up? In your device manager, are all usb devices functioning properly? Perhaps try to roll back the drivers on the ports if possible and re-install the usb driver update.
ClydeB1 said:
Have you tried a simple thing like rebooting the pc? That sounds however more like a hardware issue on the pc or phone. What happens if you plug another usb device into the port eg a usb flash drive, does that pick up? In your device manager, are all usb devices functioning properly? Perhaps try to roll back the drivers on the ports if possible and re-install the usb driver update.
Click to expand...
Click to collapse
Yeah Rebooted Everything About 10 Times Lol
All My Other USB Devices Are Fine
I Cant Roll Back The Driver In Device Manager Because It Apparently Isnt There, But Nothing Has Been Changed, WMDC Has Been ReInstalled, Net Framework Reinstalled Etc Im Just Not Getting Any Mobile Devices Show Up.
Okay, you need someone more technical than me then bro. Sorry, but I've run out of ideas.
ClydeB1 said:
Okay, you need someone more technical than me then bro. Sorry, but I've run out of ideas.
Click to expand...
Click to collapse
Ah. Thanks Anyway Bro
If you've changed usb cables, and you've checked the usb to connection setting is not on advanced, then it means the usb port & possibly main board are damaged. Did you hardspl your device?
DRTigerlilly said:
If you've changed usb cables, and you've checked the usb to connection setting is not on advanced, then it means the usb port & possibly main board are damaged. Did you hardspl your device?
Click to expand...
Click to collapse
Yeah Ages Ago, Im All Up To Date With HSPL And What Not, Usually Flash ROM's Every Week So, Im Pretty Annoyed Lol.
Other Things Work In The USB Port. But It Just Charges If I Plug My Blackstone In
just re-install microsoft windows mobile centre and you will be ready to go.But install with phone NOT Pluged.
i had the same problem here.
regards
Hi guys, I've tried installing the drivers for the mytouch4g phone so that it can connect to my thinkpad laptop, but nothings working.. any suggestions on how you guys got it to work when it wasn't showing recognizable . Any help would be great
uninstall then reinstall the drivers.
which drivers? all of them? thanx a lot for the reply
yeah.
Do you have usb debugging enabled?is the sd card mounted?
yea and it still not able to notice that it's plugged in? so should I download all new drivers for the laptop?
The driver you need is HTCDriver.exe, get it from the web.
Have you checked your Connect to PC setting?
bchen03 said:
The driver you need is HTCDriver.exe, get it from the web.
Click to expand...
Click to collapse
bchen03 nailed it right on the head. 99% of the time, ANY driver + hardware install should go like this:
- Install the driver
- Connect the device
It really couldn't get any simpler. The HTCDriver.exe installer is included on your microSD card. Just double-click, install and once it's done, connect your phone and wait for Winderz to do it's thing.
To troubleshoot, go to Device Manager (right-click My Computer/Computer > Properties) and look for a 'Unknown Device' or a device with a splat/yellow exclamation mark on it. Right-click, Uninstall/Remove.
Reboot your computer, making sure your phone isn't connected. Install the HTCDriver (if you haven't already) and then connect your phone.
My unroot, unmodified Nexus 4 is cannot be detected by any PC or Mac I plug it into. There are no notification on Windows or in my Phone. Before, my PC can detect it as a camera or media device whichever I prefer. I even installed the ADB driver to make Helium work.
My recent installed apps are Helium and Cerberus. I don't know if one of these apps causes the problem. Before this thing happened, when I plug my phone to my PC it states as "Charging (USB)" but now it's just charging.
jez1209 said:
My unroot, unmodified Nexus 4 is cannot be detected by any PC or Mac I plug it into. There are no notification on Windows or in my Phone. Before, my PC can detect it as a camera or media device whichever I prefer. I even installed the ADB driver to make Helium work.
My recent installed apps are Helium and Cerberus. I don't know if one of these apps causes the problem. Before this thing happened, when I plug my phone to my PC it states as "Charging (USB)" but now it's just charging.
Click to expand...
Click to collapse
do you want to transfer files or do you want to root it?
mitsos1996 said:
do you want to transfer files or do you want to root it?
Click to expand...
Click to collapse
i'll just transfer files
USB debugging is on?
playya said:
USB debugging is on?
Click to expand...
Click to collapse
no there is no need just connect your phone to pc . it should probably recognise it i think so.
mitsos1996 said:
no there is no need just connect your phone to pc . it should probably recognise it i think so.
Click to expand...
Click to collapse
Usb debugging on or off. Any pc cannot detect it. Mtp, ptp. Lo luck. Its working perfectly before though.
jez1209 said:
Usb debugging on or off. Any pc cannot detect it. Mtp, ptp. Lo luck. Its working perfectly before though.
Click to expand...
Click to collapse
i think 1st you should try unistalling any previous drivers to do this follow this http://www.pcworld.com/article/246041/how_to_uninstall_drivers_in_windows.html and then connect it again . I had a same problem once and i did this.If it does not work you have to ask someone more expert.
Thanks but i already did this. In fact any pc in the offixe cannot detect this phone. Even those dont have a driver. I believe u dont need a driver for PTP or MTP since windows already has a driver for that.
It used to work, doesn't anymore.
USB debugging is enabled. Camera is connected as a media device. Using the original OEM cable. Drivers are updated....
so wtf? It just says "copying" when I try it on my PC, and on my laptop it immediately says "transfer stopped, device not connected or not responding"
I really need some help on this one, if anyone is up to it, thanks in advance!
Damani311 said:
It used to work, doesn't anymore.
USB debugging is enabled. Camera is connected as a media device. Using the original OEM cable. Drivers are updated....
so wtf? It just says "copying" when I try it on my PC, and on my laptop it immediately says "transfer stopped, device not connected or not responding"
I really need some help on this one, if anyone is up to it, thanks in advance!
Click to expand...
Click to collapse
almost a month and no replies, can someone please help me?
Damani311 said:
almost a month and no replies, can someone please help me?
Click to expand...
Click to collapse
I've had this issue before, but don't remember how I solved it, so be patient with my response.
1) Try deleting your devices drivers from device manager. Restart your computer and plug in your phone and try again after they automatically download.
2) Try a different USB port, if its a desktop, use one in the back of the computer.
3) When transferring, make sure your device is unlocked.
4) Try different USB cables.
Hope one of these tips works out for you.
ABnexus said:
I've had this issue before, but don't remember how I solved it, so be patient with my response.
1) Try deleting your devices drivers from device manager. Restart your computer and plug in your phone and try again after they automatically download.
2) Try a different USB port, if its a desktop, use one in the back of the computer.
3) When transferring, make sure your device is unlocked.
4) Try different USB cables.
Hope one of these tips works out for you.
Click to expand...
Click to collapse
what do you mean device unlocked?
it's doing it on multiple computers so it's not the port. Also using two different USB cables...both supposedly OEM (one says samsung, the other has the little black USB symbol on it)
also now tried it with a third white OEM cable...it reinstalled the drivers and gave me the "what do you want to do with this device" prompt, but still does the same thing....
still not working, help please....
Damani311 said:
what do you mean device unlocked?
it's doing it on multiple computers so it's not the port. Also using two different USB cables...both supposedly OEM (one says samsung, the other has the little black USB symbol on it)
also now tried it with a third white OEM cable...it reinstalled the drivers and gave me the "what do you want to do with this device" prompt, but still does the same thing....
Click to expand...
Click to collapse
i get this problem with my 4 four oem cable lolll on my sgh-i317m(note2) because my usb port on my phone was broken after i change this piece my phone get working fine i don't know if your phone have this problem .......or try to clean your usb on your phone
mugensiz said:
i get this problem with my 4 four oem cable lolll on my sgh-i317m(note2) because my usb port on my phone was broken after i change this piece my phone get working fine i don't know if your phone have this problem .......or try to clean your usb on your phone
Click to expand...
Click to collapse
i have no problem uploading pictures from the phone
or deleted pictures from the phone
but when I try to delete music is says the disk is "write protected", on both the SD card and the internal phone storage
still looking for a solution, if anyone can help....
Can always get a card reader and take SD out of phone and put in reader slot connected to your PC. If all this is on your SD card and not the phone.
literally still do not have a solution to this, years later......anyone?
Tried different PCs?
hi guys, im trying to install the driver for my phone to unlock bootloader and ultimatly installing a custom rom but i cant see my phone in devices managers.
-the USB Debugging is checked
-the driver of my former HTC phone have been deleted.
-ADB cant find my my phone using the ''adb devices'' command, i also tried nexus root toolkit and it cant find my phone too.
-i tried 2 different USB wire and tried with every USB port on 2 different computer (using 2 different OS) and on both computer, i cant find my phone in devices manager.
- when i plug my phone, the phone is charging correctly, i tried MTP and ''charge only'' in the developper option, and i cant see the phone in devices manager using both option.
- when plugged, the phone is charging correctly but it doesnt show the USB debugging notification nor does it show the USB configuration menu notification.
am i doing something wrong or is it a hardware problem??
really appreciate your help guys THANKS!
h4rfang said:
hi guys, im trying to install the driver for my phone to unlock bootloader and ultimatly installing a custom rom but i cant see my phone in devices managers.
-the USB Debugging is checked i tried.
-the driver of my former HTC phone have been deleted.
-ADB cant find my my phone using the ''adb devices'' command, i also tried nexus root toolkit and it cant find my phone too.
-i tried 2 different USB wire and tried with every USB port on 2 different computer (using 2 different OS) and on both computer, i cant find my phone in devices manager.
- when i plug my phone, the phone is charging correctly, i tried MTP and ''charge only'' in the developper option, and i cant see the phone in devices manager using both option.
- when plugged, the phone is charging correctly but it doesnt show the USB debugging notification nor does it show the USB configuration menu notification.
am i doing something wrong or is it a hardware problem??
really appreciate your help guys THANKS!
Click to expand...
Click to collapse
If I remember correctly, when I got a new computer, I had to install 6p drivers on it. Everything else seems correct.
tropical cactus said:
If I remember correctly, when I got a new computer, I had to install 6p drivers on it. Everything else seems correct.
Click to expand...
Click to collapse
correct me if im wrong, but you need to see the device in devices manager to install the USB driver ...
h4rfang said:
correct me if im wrong, but you need to see the device in devices manager to install the USB driver ...
Click to expand...
Click to collapse
There's no pop up asking to install drivers on computer? No idea then.