Good day all!
I've just opened Galaxy S4 box and turned device on. After normal loading (splash logo) black screen appears. None of buttons works. Screen shows just clock, date, battery status and signal strength (on status bar). i'm very unhappy. Is there any way to fix it by myself? Go back to the stock is not possible because it is abroad.
titanium2323 said:
Good day all!
I've just opened Galaxy S4 box and turned device on. After normal loading (splash logo) black screen appears. None of buttons works. Screen shows just clock, date, battery status and signal strength (on status bar). i'm very unhappy. Is there any way to fix it by myself? Go back to the stock is not possible because it is abroad.
Click to expand...
Click to collapse
U can try resetting the device and see if that works
power off the phone unplug
Press -> power - home-volume up all together till u get stock recovery there u factory reset & wipe cache and reboot and see the result
Re
123hiten said:
U can try resetting the device and see if that works
power off the phone unplug
Press -> power - home-volume up all together till u get stock recovery there u factory reset & wipe cache and reboot and see the result
Click to expand...
Click to collapse
Dear 123hiten
I did exactly as you said. I entered stock recovery, then I chose wipe data/factory reset. but when I chose wipe cache android icon appeared and phone rebooted. Nothing changed. Everything is same.
titanium2323 said:
Dear 123hiten
I did exactly as you said. I entered stock recovery, then I chose wipe data/factory reset. but when I chose wipe cache android icon appeared and phone rebooted. Nothing changed. Everything is same.
Click to expand...
Click to collapse
Download a latest stock firmware from the my signature for your variant and flash it using ODIN and see whats the result
What you seam to have is sview active so either you have a magnet near your phone or your magnetic sensor is faulty.
Sent from my GT-I9505 using xda app-developers app
Re2
ranger4740 said:
What you seam to have is sview active so either you have a magnet near your phone or your magnetic sensor is faulty.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Dear ranger4740,
I didn't understnad you properly. please tell me what to do.
Re
123hiten said:
Download a latest stock firmware from the my signature for your variant and flash it using ODIN and see whats the result
Click to expand...
Click to collapse
Dear 123hiten,
I'll try. Thank you!
P.S. Do you know where I can download firmware from direct link? it's very hard to download from HotFile file hosting.
titanium2323 said:
Dear 123hiten,
I'll try. Thank you!
P.S. Do you know where I can download firmware from direct link? it's very hard to download from HotFile file hosting.
Click to expand...
Click to collapse
That's the option for stock my friend
Re:
123hiten said:
That's the option for stock my friend
Click to expand...
Click to collapse
Dear 123hiten
I flashed stock firmware, and also custom, several times.... but no result. I found that if I toush back side of phone it unblocks screen. That's the place where "smart cover" magnet should be. I bought Smart Cover, but it doesn't work properly. I feed up of that. Please tell me how can I turn the smart cover interface off? May be I should delete some files in \system directory? Thanx for your help!
P.S. Is it possible to flash Google Edition i9505 4.3 ROM to i9500?
the problem isnt the rom i think,looks to me like sveiw is on,like the other guy said most likley a faulty sensor,
re
kaaabooooom said:
the problem isnt the rom i think,looks to me like sveiw is on,like the other guy said most likley a faulty sensor,
Click to expand...
Click to collapse
sensor works perfectly in recovery (custom), and I turned of S-View. Actualy Everything is pretty fine when you pressing and holding your singer near camera. But as you release for finger screen turns black and shows clock on upper side. Other S4 doing it when you close th smart cover. I tried it with smart cover, but screen flashes or doing oposite (turns screen on when cover is closed). I want to cut that system which controls smart cover.
Any News here I could need some Help.
Hi, I've found out that if i squeeze with two fingers on the right-top of the screen the normal screen reapears and you can navigate to disable s-view cover.
Hope it helps!
Edit: To adjust the magnetic cover, unscrew the L1 screw from the back cover(it is named L1 on the right-top of the battery).
Related
Unable To see anything except the white glowing Light on my GT s5360
whenever i start my galaxy y a white glowing light appears on my screen instead of the samsung logo splash screen.
the phone boots up normally as i am able to hear the sound , but unable to see anything on the screen
i am able to recieve calls by touching on the screen but cannot see a thing on my galaxy y except the white glowing light
Please help me
sunamit37 said:
Unable To see anything except the white glowing Light on my GT s5360
whenever i start my galaxy y a white glowing light appears on my screen instead of the samsung logo splash screen.
the phone boots up normally as i am able to hear the sound , but unable to see anything on the screen
i am able to recieve calls by touching on the screen but cannot see a thing on my galaxy y except the white glowing light
Please help me
Click to expand...
Click to collapse
How did it started?
I Mean you tried to flash a rom or kernel...??
Akash vibhute said:
How did it started?
I Mean you tried to flash a rom or kernel...??
Click to expand...
Click to collapse
i just removed the battery to change the sim card & after that when i switched it on the screen was glowing but iwas unable to see anything
sunamit37 said:
i just removed the battery to change the sim card & after that when i switched it on the screen was glowing but iwas unable to see anything
Click to expand...
Click to collapse
Just wipe cache by recovery and reboot. If it doesn't work then do a factory reset or try flashing the stock rom through odin..
Akash vibhute said:
Just wipe cache by recovery and reboot. If it doesn't work then do a factory reset or try flashing the stock rom through odin..
Click to expand...
Click to collapse
how should i wipe cache or reset factory settings when i am unable see any thing
Maybe odin can work this time..
Sent from my GT-S5360 using xda premium
sunamit37 said:
how should i wipe cache or reset factory settings when i am unable see any thing
Click to expand...
Click to collapse
Can't you go to recovery mode?
If that's the case you will need to flash rom again via odin.
See if it works..
He cant see anythng on screen except white its a hardware may be
Sent from my Galaxy Y - A phone with Small Screen and Big Buttons
@tjsgy he can see samsung boot screen...so hardware should have no problem.
I think there is some problem in rom he flashed...
So friend i suggest you to try flashing stock firmware first via odin and then see if it is fixed or not...
Hi guys,
I did a research regarding my problem, found a couple of threads but none of them helped and I noticed my situation is a bit different from most users having this problem.
I live in Brazil, went on a trip to USA for 15 days, kept my SIM card and SD into the phone, just used it to access WiFi, watch videos, make a couple of Viber calls, send messages via WhatsApp, etc. Everything was fine, no problem at all.
Today, when I landed in Brazil, I turned on the phone, entered my pattern and since then my phone just displays that initial screen "Samsung Galaxy S4" and keeps rebooting like crazy. In these last 15 days, I didn't make a single change on the phone. Absolutely nothing. It just decided not to work anymore
My phone is not rooted, runs the latest updates.
I tried initializing in safe mode (power+home+volume up), it shows the android green robot at a glance and then reboots again. I can't even read what is written on the screen, so fast the reboot takes place. I also tried pressing the menu button repeatedly, but no luck as well. Tried removing the battery, turning on without SIM & SD, nothing. When I connect it to a power source, the red led doesn't even light. My computer doesn't recognize it either.
Any suggestions on what to do? Returning it to the shop is not an option as well, cause I bought it out of Brazil...
Thanks a lot, colleagues!
VIDEO: http://www.youtube.com/watch?v=_0A_D5Od9LM
maykonsantini said:
Hi guys,
I did a research regarding my problem, found a couple of threads but none of them helped and I noticed my situation is a bit different from most users having this problem.
I live in Brazil, went on a trip to USA for 15 days, kept my SIM card and SD into the phone, just used it to access WiFi, watch videos, make a couple of Viber calls, send messages via WhatsApp, etc. Everything was fine, no problem at all.
Today, when I landed in Brazil, I turned on the phone, entered my pattern and since then my phone just displays that initial screen "Samsung Galaxy S4" and keeps rebooting like crazy. In these last 15 days, I didn't make a single change on the phone. Absolutely nothing. It just decided not to work anymore
My phone is not rooted, runs the latest updates.
I tried initializing in safe mode (power+home+volume up), it shows the android green robot at a glance and then reboots again. I can't even read what is written on the screen, so fast the reboot takes place. I also tried pressing the menu button repeatedly, but no luck as well. Tried removing the battery, turning on without SIM & SD, nothing. When I connect it to a power source, the red led doesn't even light. My computer doesn't recognize it either.
Any suggestions on what to do? Returning it to the shop is not an option as well, cause I bought it out of Brazil...
Thanks a lot, colleagues!
Click to expand...
Click to collapse
You could try this take the battery out for at least 12 hours , I read somewhere that can work for your kind of problem
I had this with Note 2.
No other option but to factory reset and flash official samsung firmware from sammobile.com
After that we were back to normal. Try that.
sounds not that bad..
try booting on download mode then flash some official firmware from sammobile.com
NOTE: don't flash XXUMH8 or any MH firmware for it contains new bootloaders with the samsung KNOX crap.
I really wish I could solve that without having to install everything again... but anyway
I'm sorry for this newbie question, but how can I flash a new firmware if my computer doesn't recognize my phone?
And what software do I need in order to do that?
Thanks a lot!
Just one more question...
if I really have to install a firmware, isn't it better to flash one from another country?
It seems like Brazil is always one of the latest to get the updates
Which country would you recommend?
Thanks a lot again, colleagues.
maykonsantini said:
I really wish I could solve that without having to install everything again... but anyway
I'm sorry for this newbie question, but how can I flash a new firmware if my computer doesn't recognize my phone?
And what software do I need in order to do that?
Thanks a lot!
Click to expand...
Click to collapse
This is how you flash official firmware on your phone.
http://forum.xda-developers.com/showthread.php?t=2265477
This topic also has some troubleshooting guide.
maykonsantini said:
Just one more question...
if I really have to install a firmware, isn't it better to flash one from another country?
It seems like Brazil is always one of the latest to get the updates
Which country would you recommend?
Thanks a lot again, colleagues.
Click to expand...
Click to collapse
Well... just tried to access download mode here, but no sucess.
Phone reboots after the warning. =( I can't get the message "Downloading… Do not turn off target" after I press volume up, it reboots.
Any suggestions?
maykonsantini said:
Well... just tried to access download mode here, but no sucess.
Phone reboots after the warning. =( I can't get the message "Downloading… Do not turn off target" after I press volume up, it reboots.
Any suggestions?
Click to expand...
Click to collapse
Well if u are able to boot the device u should surely be able to go to download mode
Can u try multiple times if possible
Power off device unplug it
Press -> volume down+Home+power button all together till it shoes option there volume up and u should be at download mode and then try flashing A firmware using Odin and once its done Reset the device from the phone back up and reset option all should be fine :fingers-crossed:
try avoiding any backup restore as there myte be some issue with some bad file also
123hiten said:
Well if u are able to boot the device u should surely be able to go to download mode
Can u try multiple times if possible
Power off device unplug it
Press -> volume down+Home+power button all together till it shoes option there volume up and u should be at download mode and then try flashing A firmware using Odin and once its done Reset the device from the phone back up and reset option all should be fine :fingers-crossed:
try avoiding any backup restore as there myte be some issue with some bad file also
Click to expand...
Click to collapse
Hi,
download mode doesn't work indeed. It reboots before I'm able to press volume up...
I have tried several times.
Any ideas?
maykonsantini said:
Hi,
download mode doesn't work indeed. It reboots before I'm able to press volume up...
I have tried several times.
Any ideas?
Click to expand...
Click to collapse
Sorry this is little weird but can u you try and see of you have original Samsung s4 as there are some clones available
Just search on this forum there are some example how to find out or Google it
Sent from my SM-N900 using XDA Premium 4 mobile app
123hiten said:
Sorry this is little weird but can u you try and see of you have original Samsung s4 as there are some clones available
Just search on this forum there are some example how to find out or Google it
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm totally sure it is genuine.
I mean, I can go to download mode.
When I press power+home+volume down, it works.
But when I click volume up in order to continue to download mode, the phone reboots.
It can't stay stable for more than 3 seconds, let's say.
maykonsantini said:
I'm totally sure it is genuine.
I mean, I can go to download mode.
When I press power+home+volume down, it works.
But when I click volume up in order to continue to download mode, the phone reboots.
It can't stay stable for more than 3 seconds, let's say.
Click to expand...
Click to collapse
I m too little confuse actually may be try doing reset hard reset and also factory reset going to stock recovery see what option can work else service centre myte be the option
Sent from my SM-N900 using XDA Premium 4 mobile app
123hiten said:
I m too little confuse actually may be try doing reset hard reset and also factory reset going to stock recovery see what option can work else service centre myte be the option
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, but in order to perform a hard reset, I need to press power+home+volume up at the same time, right?
That doesn't work either.
When the small green android robot is shown, the phone immediately reboots. I can't even read if there's something written, so fast it reboots.
Are there any options left or just sending to Samsung?
maykonsantini said:
Ok, but in order to perform a hard reset, I need to press power+home+volume up at the same time, right?
That doesn't work either.
When the small green android robot is shown, the phone immediately reboots. I can't even read if there's something written, so fast it reboots.
Are there any options left or just sending to Samsung?
Click to expand...
Click to collapse
B4 giving the phone to service just go to link stock firmware in my signature and ask there his user I'd is samersh72 he myte be able to help you
Sent from my SM-N900 using XDA Premium 4 mobile app
123hiten said:
B4 giving the phone to service just go to link stock firmware in my signature and ask there his user I'd is samersh72 he myte be able to help you
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok! Thanks a lot for your help
Try removing your sd card before going to download mode, maybe it's trying to finish a failed update. Try using someone else's empty sd card
Sent from my GT-N7100 using xda app-developers app
Rebooting issues are battery related sometimes. Try another S4 battery and see if it helps
Sent from my GT-I9505 using XDA Premium HD app
Thanks MaryAnna and Obagleyfreer. I've already tried what you just suggested.
No luck
I tried to give it to Samsung, and look what I've got:
They told me to look for support in the country I bought the phone.
This is ridiculous. It's a shame.
That's when I regret changing my iPhone for a Galaxy.
So to make a long story short this is the events that lead up to my current issue on my i9500;
1. Flashed CF Auto Root
2. Flashed philz_touch_6.48.4-i9500 recovery (worked)
3. Installed pac_i9500-nightly-20140823 via recovery
The issue I had was that my phone would randomly restart and boot loop till I pull the battery. This happened about twice in the week after loading the new rom (I was running stock 4.4.2 prior). two days ago the phone refused to boot even with pulling the battery. I eventually got into download mode by pulling the battery at the yellow triangle otherwise it just reboots. I could also not access recovery mode at all.
I have tried flashing the stock firmware (XFA - South Africa) also trying different recoveries. But the problem remains. I also cannot use ADB as it does not pick up the device.
I am wondering if this issue may be the power button that broke or if my rom/recovery could be at fault? Also what else could I try in your opinion? I feel sending it off to a Samsung repair center may be my last hope :crying:
Thanks in advance!
Could be the power button.
Doed it reboot in the download mode too?
I couldnt get that part..
Generally the random reboots are linked to the bad power button only..but there can be a lot many reasons to it.
Kernels. No proper OP prescribed method of installing roms. Or a rom issue in itself.
Depends.
Sent from my Ozcan GT-i9500 using XDA mobile app
DeepankarS said:
Could be the power button.
Doed it reboot in the download mode too?
I couldnt get that part..
Generally the random reboots are linked to the bad power button only..but there can be a lot many reasons to it.
Kernels. No proper OP prescribed method of installing roms. Or a rom issue in itself.
Depends.
Sent from my Ozcan GT-i9500 using XDA mobile app
Click to expand...
Click to collapse
Thanks for the response.
Let me try clarify some points to assist. Once I am in download mode with the battery inserted it also reboots, I have to take the battery out as I see the yellow triangle as the volume up also does not seem to function till the battery is removed.
As for the how I went about installation of the first rom, this was done via recovery. The recovery was installed via Odin. Everything worked for a few days before the boot loop issue started.
Ko7Ad said:
Thanks for the response.
Let me try clarify some points to assist. Once I am in download mode with the battery inserted it also reboots, I have to take the battery out as I see the yellow triangle as the volume up also does not seem to function till the battery is removed.
As for the how I went about installation of the first rom, this was done via recovery. The recovery was installed via Odin. Everything worked for a few days before the boot loop issue started.
Click to expand...
Click to collapse
It is a power button issue.
Tap it in various directions or on any flat surface to release it
Or open up your phone and softly try releasing it..
For you have installed a knox free rom, thus knox cannot be the culprit.
Sent from my Ozcan GT-i9500 using XDA mobile app
DeepankarS said:
It is a power button issue.
Tap it in various directions or on any flat surface to release it
Or open up your phone and softly try releasing it..
For you have installed a knox free rom, thus knox cannot be the culprit.
Sent from my Ozcan GT-i9500 using XDA mobile app
Click to expand...
Click to collapse
It seems that I could not get the power button working again, I even tried hitting it flush o a flat surface as I have read on some sites. Guess I will send it off to Samsung on Monday for a repair.
Thanks for the assistance.
Ko7Ad said:
It seems that I could not get the power button working again, I even tried hitting it flush o a flat surface as I have read on some sites. Guess I will send it off to Samsung on Monday for a repair.
Thanks for the assistance.
Click to expand...
Click to collapse
Yeah anyway it is a physical damage so the warranty isnt there..
Sent from my Ozcan GT-i9500 using XDA mobile app
I wanted to update this thread now that my phone is back in a working condition.
The issue was the power button. I got a local cellphone technician to replace the power button and there after flash stock firmware with a TJAG. I did contact Samsung and they said should I not have rooted my phone this would have been covered by my warranty! :crying:
Ko7Ad said:
I wanted to update this thread now that my phone is back in a working condition.
The issue was the power button. I got a local cellphone technician to replace the power button and there after flash stock firmware with a TJAG. I did contact Samsung and they said should I not have rooted my phone this would have been covered by my warranty! :crying:
Click to expand...
Click to collapse
Ehh what? :/ covered under warranty?
Those dumb ssc guys told one of my friend in india that it is a damage done by him so they wont change or make it okay for free. :/
Because it is a physical damage..so he gave INR1000 ($20 appx. After a heavy argument and bargaining) To get it okayed.
Sent from my GT-I9500 using XDA Free mobile app
Hello,
Maybe someone can help..
Samsung s4 i337 32Gb will only show the Samsung logo when turned on and after about 2 seconds nothing, screen blank , ( New Screen ) No lights , though it vibrates when its first turned on,
For what ever reason if I keep messing with it( take batter in and out) , it will boot all the way, Even then after a short time it turns off again, and that's only after a few days of messing with it..
Any ideas ?
on s side note I am a retired computer /electronic engineer and have an idea how these work, I repair them on the side for clients and so forth, but am at a lose with this one, Its my personal and would love to be able to get pics and so forth off it,,
Thank you !!
Is the phone running a stock Samsung rom? Have you tried reflashing a stock rom or performing a factory wipe?
audit13 said:
Is the phone running a stock Samsung rom? Have you tried reflashing a stock rom or performing a factory wipe?
Click to expand...
Click to collapse
yes it's stock and No have not re flashed the rom , wont stay on long enough for a rom flash or a system wipe..
Maybe a battery problem? This happens regardless of whether the phone is or is not connected to a power source?
audit13 said:
Maybe a battery problem? This happens regardless of whether the phone is or is not connected to a power source?
Click to expand...
Click to collapse
Thank you , Yes I have tried a few different battery's with and with out the charger and Nothing changes
It won't stay in download mode either? Was the phone ever dropped? Exposed to moisture? Is it an att phone?
x_MarkV_x said:
Hello,
Maybe someone can help..
Samsung s4 i337 32Gb will only show the Samsung logo when turned on and after about 2 seconds nothing, screen blank , ( New Screen ) No lights , though it vibrates when its first turned on,
For what ever reason if I keep messing with it( take batter in and out) , it will boot all the way, Even then after a short time it turns off again, and that's only after a few days of messing with it..
Any ideas ?
on s side note I am a retired computer /electronic engineer and have an idea how these work, I repair them on the side for clients and so forth, but am at a lose with this one, Its my personal and would love to be able to get pics and so forth off it,,
Thank you !!
Click to expand...
Click to collapse
The same thing happened to my i337 after I installed one app (soft keys) and reboot. Samsung logo showed up for a second and then went dark.
Went to recovery and wipe /factory reset twice did not work.
Finally, went to download mode and odin the NB1 firmware. That solved the problem.
I was on OK2 bootloader then. I do not know what bootloader you are on.
I
audit13 said:
It won't stay in download mode either? Was the phone ever dropped? Exposed to moisture? Is it an att phone?
Click to expand...
Click to collapse
Yes it was dropped, But only form about 2 feet , landed on a shoe and it has a cover, but after that is when I started having issues come to think of it ..
sway8966 said:
The same thing happened to my i337 after I installed one app (soft keys) and reboot. Samsung logo showed up for a second and then went dark.
Went to recovery and wipe /factory reset twice did not work.
Finally, went to download mode and odin the NB1 firmware. That solved the problem.
I was on OK2 bootloader then. I do not know what bootloader you are on.
I
Click to expand...
Click to collapse
problem is , it wont stay on long enough in down loader mode, Plus I do have things I would like to save if I can.,
I just may have to try and find another 32Gb main board or a broken screen phone type thing and start over..
If it wont stay on, I'm not how the data could be pulled from the phone. If USB debugging was enabled, adb commands may be useful in recovery mode.
audit13 said:
If it wont stay on, I'm not how the data could be pulled from the phone. If USB debugging was enabled, adb commands may be useful in recovery mode.
Click to expand...
Click to collapse
I may end up losing the data, So be it..
Would have been nice to figure out what is going on with this one though..
If anyone knows where I can get a i337 32Gb main board, I maybe interested in it..
Hey Guys,
I have a dead phone(kind of). All it displays is
"Have been in Factory Mode. long press power button and Normal boot"
And in very tiny font, there is a line saying
"=>Tool DL Image Load Fail!"
This stays for a few seconds then it turns off, and repeat, again the same this comes up on the screen.
What I have tried:
1) Flash the stock ROM using SP Flash Tools several times
2) Cleaned the power button from the inside a bit, because some thread said there might be a sticky button.
Flashing with SP Flash Tools shows that the flash is successful, but it didn't help.
EDIT: Now it displays something as "eFuse blow: Success". Damn!
PraneethMv said:
Hey Guys,
I have a dead phone(kind of). All it displays is
"Have been in Factory Mode. long press power button and Normal boot"
And in very tiny font, there is a line saying
"=>Tool DL Image Load Fail!"
This stays for a few seconds then it turns off, and repeat, again the same this comes up on the screen.
What I have tried:
1) Flash the stock ROM using SP Flash Tools several times
2) Cleaned the power button from the inside a bit, because some thread said there might be a sticky button.
Flashing with SP Flash Tools shows that the flash is successful, but it didn't help.
EDIT: Now it displays something as "eFuse blow: Success". Damn!
Click to expand...
Click to collapse
Have you set it to format all in sp?
Try it maybe it will work
If didnt i think its hardware issue
crazylife said:
Have you set it to format all in sp?
Try it maybe it will work
If didnt i think its hardware issue
Click to expand...
Click to collapse
Hey, Thank you for replying.
Have tried that method, its just the same thing, but now it is not displaying that tiny line.
Now it goes into the factory mode and shows some options in Chinese. And it stays there till i select something.
The last option, i know is "Reboot To Phone" (Via Google Translate).
When i select that option it goes back into the Factory mode again.
Can you flash twrp and boot in to recovery...May be..And then do something from there?:
sandeep101 said:
Can you flash twrp and boot in to recovery...May be..And then do something from there?:
Click to expand...
Click to collapse
Tried to flash TWRP through SP, it returns an error:
ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND(6045)
MSP ERROR CODE:0x00.
Make sure volume + button is not pressed.
During boot can you boot in to stock recovery,
press POWER BUTTON + VOLUME UP + VOLUME DOWN until Lenovo logo appear, then continue press VOLUME UP + VOLUME DOWN
Thanks all. I somehow got it to work... and now my phone is all good.
As crazylife told, there was some hardware issue. Apparently, there was a tini-tiny bit of a circuit which, due to water allegedly, got short. I had it cleaned by some local phone shop.( He also claimed that the phone work anyway ,though). After that i flashed the stock rom, and it worked.
And btw, how do i mark the thread solved?
Hi, even I'm stuck with the same problem.
PraneethMv said:
Thanks all. I somehow got it to work... and now my phone is all good.
As crazylife told, there was some hardware issue. Apparently, there was a tini-tiny bit of a circuit which, due to water allegedly, got short. I had it cleaned by some local phone shop.( He also claimed that the phone work anyway ,though). After that i flashed the stock rom, and it worked.
And btw, how do i mark the thread solved?
Click to expand...
Click to collapse
Hi, even I'm stuck with the same problem.
Even the lenovo service center guys raised their hands saying it's an hardware problem and I've to replace the entire PCB to slove the issue. Could you be more specific on how to resolve this issue? if possible could you please let me know at which place you got your mobile fixed? Thanks
Regards,
Jagan ([email protected])
Jaganathan.S said:
Hi, even I'm stuck with the same problem.
Even the lenovo service center guys raised their hands saying it's an hardware problem and I've to replace the entire PCB to slove the issue. Could you be more specific on how to resolve this issue? if possible could you please let me know at which place you got your mobile fixed? Thanks
Regards,
Jagan ([email protected])
Click to expand...
Click to collapse
I had a problem with the Motherboard due to water getting in, and apparently it caused a short-circuit near the power button module. Actually speaking, I was really dissatisfied with the kind of service the Lenovo guys give to its customers, because first they told me that they will clean, and claimed that the board must be changed. The only thing which needed to be done in my phone was to clean that part of the board with White Petrol(you can ask the local mobile shop guys, they will have it, but just be careful). That solved my problem. And thanks to few threads, i got it working.
P.S: I am from Hyderabad, so had it solved here in a local shop.
Hi, Thanks for your reply. Was able to come out of that situation after 3 days, but had left my mobile with the local service center for 2 days (At the time, when i took my mobile from service center, my mobile was not working, was informed that the mobile is dead) I thought of giving a last try and plugged in the charger on 3rd day it started working . My mobile had a new problem display was broken (from inside) and speakers were not working, when i asked that guy his reply was " how can i know, your mobile was dead, when u brought in hear, my job was to fix it, why will i break it?" though my mobile was back to normal I had to pay a huge price of display and speakers. Hope everyone got to know the take away from my story. Crazy world; lesson learnt.
The same is happening to me!
And my phone keeps vibrating, also I don't know how to select one of those Chinese options, can you please help me sir?
Pok25dhw said:
The same is happening to me!
And my phone keeps vibrating, also I don't know how to select one of those Chinese options, can you please help me sir?
Click to expand...
Click to collapse
Hey!
My phone had some water damage issue, hence the loop. Opened the phone and cleaned it a bit. Yours might be different problem, try flashing stock firmware, or going into fastboot mode and flashing recovery. Currently don't have this phone so can't help that much.
PraneethMv said:
Hey!
My phone had some water damage issue, hence the loop. Opened the phone and cleaned it a bit. Yours might be different problem, try flashing stock firmware, or going into fastboot mode and flashing recovery. Currently don't have this phone so can't help that much.
Click to expand...
Click to collapse
Oh. Yes my phone too got wet in rain. I went to some shop and they helped me out. But thanks to you I realize that it was repairable and that too without loosing any data. Thanks so much for saving my thousands of ruppees that'd have been wasted to get a new phone. Also yes this model in general is pretty old so I can understand that most of the people don't use it anymore. Again thank you very much for saving all the stuff I had on this phone and the money. ??