Hi guys!
I did a backup of stock rom using cwm. then restored a backup of cm7. on restoring, it gave me this error:
ERROR MOUNTING /SYSTEM!
RESTORE FAILED.
so i rebooted my phone. now it get soft bricked. i can open recovery. in stock recovery, i can see all the recovery options but at the bottom its written
APPLING MUTI-CSC
RFS- FAILED TO MOUNT /SYSTEM (INVALID ARGUMENT)
yes.. spellings are written wrong on recovery.
if i goto cwm and restore nandroid backup of stock recovery, its giving error that
ERROR MOUNTING /SYSTEM
RESTORE FAILED
i tried formatting system via cwm, but it gave me error that
ERROR MOUNTING /SYSTEM
SKIPPING FORMAT..
DONE.
i tried flashing other kernels via cwm but it didnt help. also i cannot use odin (it takes upto 1-2 hrs trying for odin to detect my phone)
i am going to flash cm7.. i dont know if it will help or not..
pleaseeeeeeeeeeee help..
UPDATE: I think dat it will help if anyone could give a backup of /system dir in form of flashable zip (with commands like mkdir etc to remake system dir),, then it would be gr8..
If you a restoring a nandriod backup of cm7 you need to flash percys kernel first (I presume you were using that kernel when you were using cm7 as that is required) then reboot to recovery wipe system data cache then you can restore your nandriod backup
Change kernel to stock using hell fusion and format system and mount
Gửi từ Galaxy Y bằng cách sử dụng tia X truyền từ mặt trời!
If you have a nandroid backup of percy's cm7 then try flash stock rom via odin. Then go to stock recovery and flash percy's CyanogenMod7#2 kernel. Reboot phone and go to recovery again... You will must see CWM recovery and then try restore your nandroid backup.
Sorry for bad English
1. Flash percy's kernel.
2. then reboot recovery
3. format system. format data. format cache. mount all of them (system may not mount)
4. flash cm7 rom
5. reboot system.. (still bricked)
6. take out battery and re insert
boot into cwm, u will see many errors
7. flash cm rom again (3 times) (see steps3&4 for info)
8. reboot (still bricked)
9. boot into cwm. now all errors gone. format all and mount all of them (system will mount)
9. flash hyperion rom
10. fix permissions
11. reboot system now
12. fixed!
techmentry said:
1. Flash percy's kernel.
2. then reboot recovery
3. format system. format data. format cache. mount all of them (system may not mount)
4. flash cm7 rom
5. reboot system.. (still bricked)
6. take out battery and re insert
boot into cwm, u will see many errors
7. flash cm rom again (3 times) (see steps3&4 for info)
8. reboot (still bricked)
9. boot into cwm. now all errors gone. format all and mount all of them (system will mount)
9. flash hyperion rom
10. fix permissions
11. reboot system now
12. fixed!
Click to expand...
Click to collapse
thanks!!!!! that worked
Say, i come from another ROM.
I was using resurrection remix kitkat the final version and i actually used the CM theme chooser to change some styles and boot animations.
I am aware it can cause system crashes but the last time it crashed, it gave me the exact same errors with a frozen s III logo. Refused to boot, soft brick with access to both odin mode and cwm recovery of resurrection, unable to mount /sdcard (E
Will this procedure work on my device GTi9300 or should i keep looking for more?
I tried flashing
1) stock rom but connection hangs
2) Stock recovery NANDWRITE fails
3) PIT file but gets stuck on Get pit mapping thingy
4) and occasionally it just freezes at establishing connection
I tried pushing the file through abd but it doesn't detect once it reboots to bootloader on fastboot.
MavPinch said:
Say, i come from another ROM.
I was using resurrection remix kitkat the final version and i actually used the CM theme chooser to change some styles and boot animations.
I am aware it can cause system crashes but the last time it crashed, it gave me the exact same errors with a frozen s III logo. Refused to boot, soft brick with access to both odin mode and cwm recovery of resurrection, unable to mount /sdcard (E
Will this procedure work on my device GTi9300 or should i keep looking for more?
I tried flashing
1) stock rom but connection hangs
2) Stock recovery NANDWRITE fails
3) PIT file but gets stuck on Get pit mapping thingy
4) and occasionally it just freezes at establishing connection
I tried pushing the file through abd but it doesn't detect once it reboots to bootloader on fastboot.
Click to expand...
Click to collapse
Please check where you are posting before you post - this forum is for the galaxy y 5360
As a general rule when restoring backups
1- restore the backup using the same kernel to which the backup was made
2- restore the backup using the same recovery version to which the recovery was made
When flashing stock rom via odin make sure you have the Samsung USB driver installed
Never flash bootloader or pit unless you know what you are doing - they are not needed for typical stock rom flashing
Goto your own phone forum for support on flashing stock rom for your device
marcussmith2626 said:
Please check where you are posting before you post - this forum is for the galaxy y 5360
As a general rule when restoring backups
1- restore the backup using the same kernel to which the backup was made
2- restore the backup using the same recovery version to which the recovery was made
When flashing stock rom via odin make sure you have the Samsung USB driver installed
Never flash bootloader or pit unless you know what you are doing - they are not needed for typical stock rom flashing
Goto your own phone forum for support on flashing stock rom for your device
Click to expand...
Click to collapse
Gotcha. Just poking around here and there because i haven't been able to work it.
techmentry said:
1. Flash percy's kernel.
2. then reboot recovery
3. format system. format data. format cache. mount all of them (system may not mount)
4. flash cm7 rom
5. reboot system.. (still bricked)
6. take out battery and re insert
boot into cwm, u will see many errors
7. flash cm rom again (3 times) (see steps3&4 for info)
8. reboot (still bricked)
9. boot into cwm. now all errors gone. format all and mount all of them (system will mount)
9. flash hyperion rom
10. fix permissions
11. reboot system now
12. fixed!
Click to expand...
Click to collapse
Now nothing formats or mounts, any ideas why?
Related
Hi guys, I hope you can help me.
I have just rooted + flashed my motorola defy plus for the first time (on any device for that matter)
I installed 2nd init, version 0.6.... or something.
Put a rom, kernel and google apps on my sd-card
Then I turned usb-debugging off and rebooted my phone.
Now I can get into bootmenu, and this is what I do:
1) go to recovery
2) select custom recovery
3) then it says: Clockworkmod Recovery v2.5.1.8
E: Can't open /tmp/recovery.log
4) I then select wipe data/factory reset
5) then it says this: Formatting DATA
Formatting CACHE
FORMATTING SDEXT
No app2sd partition found. Skipping format of /sd-ext
Formatting SDCARD:/.android_secure
Data wipe complete
E: Can't open /tmp/recovery.log
6) After that i select install zip from sdcard
7) then I select choose zip from sdcard
8) then I select the zip file containing the rom
9) And it says: Finding update package
Opening update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted
Now I can't go any further and can't use my phone at all
I hope u guys can help me, and that I haven't F*ed up my phone
I have a quite similar problem.
On a defy+,rooted 2ndinit installed, backup-ed first, download the new quarx05/03 ICS, put the zip on sd, wipe data, reboot and start to install ics, but the message was
''Finding update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted"
Thanks to the previously backup I can use may phone as usual.
What I have done wrong with de ICS installation?
Thanks
PS. Sorry for probable a dummie question:What we have to do with md5 zip near the CM9 Jordan.zip?
A little help please about the subject?
Thank you
ics
The entire process
ClockworkMode v2.5.1.8
Wipping data...
Formatting DATA...
Formatting CACHE...
Formatting SDEXT..
No app2sd partition found.Skipping format of /sd-ext.
Formatting SDCARD: /.android_secure...
Data wipe complete
E: Can't open /tmp/recovery.log...
Installing: SDCard:download/CM9-ICS-MR1-120305-jordan.zip
Finding update package
Opening update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted
if try Wipe Dalvik Cache:
E: Can't mount /dev/block/mmcblk0p2
(No such file or directory)
I guess that this is a simple and many times occured error, since nobody has any answer....
Does you disabled the usb debugging before flashing?
Yes I do, but nothing change,
Thanks
if I'm not mistaken the last release of 2nd init is not compatible with defy. Try to check this on the development forum. I hope I have been of help.
I'd tried with both 1.0.7 latest and 0.6.1.
With latest, the phone is blocked.
Thanks
I had used this. Try with it
P.S. sorry for my bad english.
Tried, the same errors,
Thanks
I don't know. Sorry. By the time i had used that.
I think you need to go to stable recovery after you wipe your data from custom recovery
Sent from my MB525 using xda premium
I think you need to go to stable recovery after you wipe your data from custom recovery
What do you mean by "stable recovery"? You talk about version 0.6. of 2nd init or something else?
Can you show a step-by step procedure?
Thank you in advance.
However, which is the procedure to un-root a defy+ and to have it with the original, fresh system?
I had flash a new SBF, root with Unlockroot v2.3, anything else doesn't work, 2ndinit v2.0 stable, wipe data/cache/dalvik (same errors), try to install cm9-ics, the same error "Can't make /tmp/update_binary"
What the f.....?
cretu22 said:
I had flash a new SBF, root with Unlockroot v2.3, anything else doesn't work, 2ndinit v2.0 stable, wipe data/cache/dalvik (same errors), try to install cm9-ics, the same error "Can't make /tmp/update_binary"
What the f.....?
Click to expand...
Click to collapse
Hi, I have exactly the same problem.. Trying to find a solution but is quite difficult. First I thought it has something to do with the partitioning, as stated in THIS topic. But, in THIS topic, people say that partitioning the SD card is not necessary at all..
@Cretu22: Yes stable recovery is CWM 0.6
Don't install stable recovery! I too faced this issue when I flashed using stable recovery. In snd init install Latest recovery and then try flashing your ROM. That should work..
I did choose the stable version indeed 0.6.7.
Now i did uninstall it and installed the latest 1.0.7, but when I reboot my phone it won't get into the boot menu but just boots into android. Tried it several times, but only with 0.6.7 I seem to be able to get in the menu
fokkeh said:
I did choose the stable version indeed 0.6.7.
Now i did uninstall it and installed the latest 1.0.7, but when I reboot my phone it won't get into the boot menu but just boots into android. Tried it several times, but only with 0.6.7 I seem to be able to get in the menu
Click to expand...
Click to collapse
Okay!! I hope you were pressing the volume down button when the blue LED came?? Try doing this again all over.. I mean reinstall 2nd init and then latest recovery.. I remember doing this once(instal latest recovery after I installed stable recovery)..
pranks1989 said:
Okay!! I hope you were pressing the volume down button when the blue LED came?? Try doing this again all over.. I mean reinstall 2nd init and then latest recovery.. I remember doing this once(instal latest recovery after I installed stable recovery)..
Click to expand...
Click to collapse
Yes, its working Pressing the volume down button was not necessary with 0.6.7, that was what went wrong. Now the zips installed like a charm
i know the answer and is very simple
the problem is that you cannot create that specific folder.... because it already exist, cmp (connected music player) creates it, just delete it from SD and done!
Hi!
I've been using CM9 nightly's since some days ago, but when I updated to the version of the day 19, it began with FC until that this morning, it reboot suddenly and it hasn't boot again.
I suppose that if i reflash the XXJW4, so i've tried it but, when it tries to boot, it boots on recovery and gives the following errors:
E: copy_dbdata_media: Can't mount /dbdata
your storage not prepared yet. please use UI men u for format and reboot actions.
Meida files copy failed
---Deleting files
E: failed to mount /dbdata (File exists)
E: delete_data_files: Can't mount /dbdata
your storage not prepared yet. please use UI men u for format and reboot actions.
Meida files copy failed
----Updating filesystem....
E: failed _filesystem_for_rfs:can't mount /dbdata
Of course, it doesn't boot now.
Any solution? Thanks a lot!
I had similar problem and I had to do full cycle
restore from recovery also was giving me bootloop
1. flash stock gingerbread rom
2. flash CF-Root (corresponding with ROM)
3. install CM9 from recovery (wipe data and cache).
If you still can go to the download mod, try to flash a ginger stock rom.
Sent from my GT-I9000 using XDA Premium App
Look to the message of Tyxerakias 29th March 2012, 02:25 PM in Galaxy S9000 General.
[ROM] I9000XXJW4 (2.3.6) [19.03.2012][ValuePack Firmware] (in General)
--------------------------------------------------------
Tyxerakias 29th March 2012, 02:25 PM
# 77To those of you who get bootloops after flashing:
Go into download mode, and flash this, via odin, after you unzip it. (i.e. flash the .tar file, as usual - not the zip).
dbdata.tar
Cheers
Explanation: The bootloops are caused because the dbdata file is missing from the rom (it's just a Kies upgrade, not a full rom), and you probably ticked repartition when flashing.
nope.
in my case repartitioning was not checked, because I'm having a bootloop after flashing kernel, updatet rom, ... from CWM, so there is no option to repartition.
Those recovery fixes never worked for me, but maybe authors case is easier.
finally i have fixed it flashing a stock rom (JVU), XXJW4, root, CM9 and that is! thank you everybody!
Yes. Me too.
But... I've had boot-loop like 8 times now. It's irritating I have to flash stock, CM9, slim-ics every time. even worse I don't know what causes the boot-loop. Tooday I just rebooted to CWM, cleaned dalvik-cache and cache and my phone didn't start any more. I was on semaphore 1.0.0s kernel.
Now I'll try stock slimICS kernel and we'll see...
Hello everyone.
I hope you can help me.
I had an A500 bricked spontaneously (I was checking Twitter, the screen frozen, I turned off the tablet and when I turned it on again, it stucked on Acer logo) so I used the guide to recover recovery (this: http://forum.xda-developers.com/showthread.php?t=1751978, because I rooted my tablet but I didn't install recovery).
Everything was ok, I flashed the V7-Thor v1.7.3 but when I tried to install stock ROM of ICS (wipe data and cache), the tablet got "re-bricked" and only enter in APX mode.
Then I reflashed and installed V8-Thor_1.7.3_recovery and I tried to install Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT through update.zip (turned on the tablet in recovery --> Install from zip file --> Install zip file from SD card --> update.zip, then it said "Installed" and I rebooted the tablet, but it stuck on "Booting primary kernel image"...
What I'm missing or doing wrong? :/
What should I do to run ICS in my tablet again?
I'm not familiarized with the ROMs, Recoverys or flash... sorry if my question is stupid or something, but before this I never moved anything to my tablet (except for root it).
And sorry too for my bad English.
Mafvtapatio said:
Hello everyone.
I hope you can help me.
I had an A500 bricked spontaneously (I was checking Twitter, the screen frozen, I turned off the tablet and when I turned it on again, it stucked on Acer logo) so I used the guide to recover recovery (this: http://forum.xda-developers.com/showthread.php?t=1751978, because I rooted my tablet but I didn't install recovery).
Everything was ok, I flashed the V7-Thor v1.7.3 but when I tried to install stock ROM of ICS (wipe data and cache), the tablet got "re-bricked" and only enter in APX mode.
Then I reflashed and installed V8-Thor_1.7.3_recovery and I tried to install through update.zip (turned on the tablet in recovery --> Install from zip file --> Install zip file from SD card --> update.zip, then it said "Installed" and I rebooted the tablet, but it stuck on "Booting primary kernel image"...
What I'm missing or doing wrong? :/
What should I do to run ICS in my tablet again?
I'm not familiarized with the ROMs, Recoverys or flash... sorry if my question is stupid or something, but before this I never moved anything to my tablet (except for root it).
And sorry too for my bad English.
Click to expand...
Click to collapse
I think where you went wrong was choosing "install zip file from sdcard >update.zip"
Go back into recovery again > install from zip file > Choose zip from SD card (
if the file is on your micro sd card)
You should see a list of all your files and choose your rom file:
Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT.zip
Once its done, Stay in recovery and go to: Wipe Menu and do all the wipes there
Data -cache and dalvi-cache then reboot
Once you're all set up and before you reboot again, make sure there is not an "update.zip" on your sdcard - if you boot to recovery it may flash automatically and you will end up "stuck" again
good luck
dibb
dibb_nz said:
I think where you went wrong was choosing "install zip file from sdcard >update.zip"
Go back into recovery again > install from zip file > Choose zip from SD card (
if the file is on your micro sd card)
You should see a list of all your files and choose your rom file:
Acer_AV041_A500_1.054.00_WW_GEN1-DEODEXED-FULLROOT.zip
Once its done, Stay in recovery and go to: Wipe Menu and do all the wipes there
Data -cache and dalvi-cache then reboot
Once you're all set up and before you reboot again, make sure there is not an "update.zip" on your sdcard - if you boot to recovery it may flash automatically and you will end up "stuck" again
good luck
dibb
Click to expand...
Click to collapse
Thanks! I did it and it worked, but after the reboot the tablet only shows the animated android logo... what's the problem? The ROM?
When I did the "Wipe data" it said "Formatting data" and after "Skipping erase of /data/media". I checked with the "Mount and Storage" menu in recovery and seems like my data before the brick's still in the internal storage of the tablet... is that normal?
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Mafvtapatio said:
Thanks! I did it and it worked, but after the reboot the tablet only shows the animated android logo... what's the problem? The ROM?
When I did the "Wipe data" it said "Formatting data" and after "Skipping erase of /data/media". I checked with the "Mount and Storage" menu in recovery and seems like my data before the brick's still in the internal storage of the tablet... is that normal?
Click to expand...
Click to collapse
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
dibb_nz said:
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
Click to expand...
Click to collapse
I tried to reflash the same ROM, but this time nothing happened, again only says "Booting primary kernel image"... a question, if I try to flash a stock ROM (like Acer_A500_1.031.00_WW_GEN1.zip from the post of stock roms)... it will let my tablet again only in APX mode when I turn on it, right?
And I see the option "Fastboot mode" when I turn on the tablet holding Vol +.
About your question I don't know how to answer, I flashed V8-Thor_1.7.3_recovery... is that a CWM?
In the top it says CWM Recovery v5.5.0.x(thor2002ro/digetx rev 1.7.3) Iconia A50x...
Mafvtapatio said:
a question, if I try to flash a stock ROM (like Acer_A500_1.031.00_WW_GEN1.zip from the post of stock roms)... it will let my tablet again only in APX mode when I turn on it, right?
Click to expand...
Click to collapse
sorry, not sure I understand your question...are you saying you're now stuck in apx mode - black screen power light on?
There are 2 types of stock rom on here....
1) Official Acer EUU or OTA roms
2) Official Stock roms which are Custom - pre-rooted and able to flash CWM etc -
If you flash one of the Acer EUU or OTA roms you will lose CWM and Root
To be honest - with your tab "spontaneously" booting and being stuck on the acer logo and the issues that have followed - its sounding more and more like a faulty chip - this is something that only acer can fix...I could be wrong about this and I hope I am...but something is just not feeling right...
- you still have cwm and access to fastboot - thats a bonus - maybe do a complete format thru CWM of data/media, system (and flexrom if its there) then try to flash a rom again - if it still won't flash AND if you're not stuck in apx mode then I think you'd be best to download an official update.zip - from Blackthund3rs thread here this one -
Acer_AV041_1.054.00_WW_GEN1:
Once you've d/l'ed it...try opening it if you can't then it will need decrypting the instructions for this are in the OP..
Once you have extracted the "update.zip" and have it on your sdcard - flash via CWM
good luck
dibb
dibb_nz said:
EDIT: what version of cwm to have now? If its not 1.7.3 then go ahead and reflash the v8
Yes it is - keeps your data intact but 'resets' the rom to like it is when you first flash, there is an option to wipe data/media if you wish to - theres a toggle to enable it but on every boot to recovery it will be disabled again...
You can try another flash of the rom itself otherwise reflash the v8 bootloader.
Do you have access to "fastboot mode" power vol down - just wondering
dibb
Click to expand...
Click to collapse
What do you mean "If if its not 1.7.3"? Are there problems with flashing the bootloader with 1.7.3?
no, no, not at all, i meant if he didnt have that version to reflash v8 to get it
oops clicked wrong button
he said he flashed stock rom and ended up with dead android = stock recovery
A500 V8 booting primary kernel image
dibb_nz said:
no, no, not at all, i meant if he didnt have that version to reflash v8 to get it
oops clicked wrong button
he said he flashed stock rom and ended up with dead android = stock recovery
Click to expand...
Click to collapse
Hello everyone!
I have a similar issue whith my a500. but i can restore the backup i did of my honeycomb sistem in cwm (i have acess)
aftter making the backup i have flashed V8-Thor_1.7.3_recovery.a500apx in apxflashtool in order to get ics boot loader and install ICS roms.
so far so good after the flash i had already a ICS rom in my sd card redy to flash so imediatly after V8 flash entered cwm and did clean format and wipe all. Next installed the rom (aroma instalation) no problems what so ever. After instalation is finished reboted and now im stuck on skilax v8 bootloader boting primary kernel image
i tried the folowing
- chage kernel multiboot fix partitions redo clean format etc etc etc (ALL THE STEPS)
-many other ics jellybean rooms (all of the install but dont boot)
- honey comb rooms install and BOOT normaly.
at this point thought maybe it was a bad V8 flash and decided to reflash the V8-Thor_1.7.3_recovery.a500apx
Now the flash tool can get pass uploading image phase.
i have correct sbk and cpuuid since i had to recover last week from boot verified failed error and use the flash tool whith correct sbk to recover the tablet with sucess.
So basicly im stuck wit
h my honeycomb rom backup or other HC roms
any news on this subject?
cybersaicho said:
Hello everyone!
I have a similar issue whith my a500. but i can restore the backup i did of my honeycomb sistem in cwm (i have acess)
aftter making the backup i have flashed V8-Thor_1.7.3_recovery.a500apx in apxflashtool in order to get ics boot loader and install ICS roms.
so far so good after the flash i had already a ICS rom in my sd card redy to flash so imediatly after V8 flash entered cwm and did clean format and wipe all. Next installed the rom (aroma instalation) no problems what so ever. After instalation is finished reboted and now im stuck on skilax v8 bootloader boting primary kernel image
i tried the folowing
- chage kernel multiboot fix partitions redo clean format etc etc etc (ALL THE STEPS)
-many other ics jellybean rooms (all of the install but dont boot)
- honey comb rooms install and BOOT normaly.
at this point thought maybe it was a bad V8 flash and decided to reflash the V8-Thor_1.7.3_recovery.a500apx
Now the flash tool can get pass uploading image phase.
i have correct sbk and cpuuid since i had to recover last week from boot verified failed error and use the flash tool whith correct sbk to recover the tablet with sucess.
So basicly im stuck wit
h my honeycomb rom backup or other HC roms
any news on this subject?
Click to expand...
Click to collapse
Yes just one question what is - " chage kernel multiboot "???? Sounds dodgy
You can boot to fastboot mode then do an erase of data and cache, see if that helps for a start....
Do you stil have recovery and can you still restore your HC backup?
I have seen a post or two where tabs can only boot HC Roms and no ICS
It "maybe" the dreaded hardware fault - you might be best to d/l the babsector.rar and run that - it will give you a proper error if theres something wrong - can get it from the root guide in my sig. Give me a minute or two and I'll post some steps in using it
---------- Post added at 09:12 AM ---------- Previous post was at 08:53 AM ----------
How to use babsector.rar
Download and extract the babsector.rar to a folder on your PC
Turn your tab off and put it in apx mode manually. Press and hold reset button, hold power for 3 secs after the light comes on and release it, after another second release the reset button. Your screen is black and the power light is on.
Connect your tab to your PC
Navigate to the babsector folder and click on 501 A.bat, when its done
Reboot into recovery
Go to Mounts and Storage and Format System twice and Power Off
Go back into apx mode and run 501 B.bat
Reboot into recovery and do the wipes and flash your rom
Reboot
Hlo. I was recently trying to install new Custom ROM(ROM thread in link) I did these steps.
1. Boots into stock recovery
2. Boots into CWM recovery via .zip file.
3. Cleared Data Factory reset, Clear dalvik cache and clear battery stats.
4. Flashed ROM file(it was successfull)
Then I reboot the device and it is stuck on Samsung Galaxy Y logo screen.
I dont know what happened wrong(also i followed steps said by rom owner)
Hele plzz.http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=39672880
Sent from my GT-S5660
mjobanjatt said:
Hlo. I was recently trying to install new Custom ROM(ROM thread in link) I did these steps.
1. Boots into stock recovery
2. Boots into CWM recovery via .zip file.
3. Cleared Data Factory reset, Clear dalvik cache and clear battery stats.
4. Flashed ROM file(it was successfull)
Then I reboot the device and it is stuck on Samsung Galaxy Y logo screen.
I dont know what happened wrong(also i followed steps said by rom owner)
Hele plzz.http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=39672880
Sent from my GT-S5660
Click to expand...
Click to collapse
The rom mentioned is cm7 based
you need to be on percys cm#2 kernel - search dev section for his cm7 thread and it's on the 1st page
it was a kernel problem i think....
try hells fusion just after flashing
JUST PRESS THANKS IF I HELPED...
CHK IT HERE:
ESPECIALLY FR BRICKED DEVICES:
http://forum.xda-developers.com/showthread.php?t=1600373
mjobanjatt said:
Hlo. I was recently trying to install new Custom ROM(ROM thread in link) I did these steps.
1. Boots into stock recovery
2. Boots into CWM recovery via .zip file.
3. Cleared Data Factory reset, Clear dalvik cache and clear battery stats.
4. Flashed ROM file(it was successfull)
Then I reboot the device and it is stuck on Samsung Galaxy Y logo screen.
I dont know what happened wrong(also i followed steps said by rom owner)
Hele plzz.http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=39672880
Sent from my GT-S5660
Click to expand...
Click to collapse
To this procedure:
Flash stock rom via odin
Go to cwm
Mount all system,data,cache
Flash cyanogenmod#2/Jarvis-CM v1.2 #2 kernel
GO to advance Reboot recovery
You will see small fonts
Go to mount and storage
Format system,data,cache
Mount all of them again
Flash cm7 based rom
Wipe data
Reboot system
Press thanks if i helped:good:
You forgot to mount "/system"
Sent from from from from, PSHHHHHGHGHGHGGGGGGGGHHHHH , AIOOOOOOOOooooo0
Reply
mjobanjatt said:
Hlo. I was recently trying to install new Custom ROM(ROM thread in link) I did these steps.
1. Boots into stock recovery
2. Boots into CWM recovery via .zip file.
3. Cleared Data Factory reset, Clear dalvik cache and clear battery stats.
4. Flashed ROM file(it was successfull)
Then I reboot the device and it is stuck on Samsung Galaxy Y logo screen.
I dont know what happened wrong(also i followed steps said by rom owner)
Hele plzz.http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=39672880
Sent from my GT-S5660
Click to expand...
Click to collapse
First fLASH cwm then wipe data wipe cahe and mount everythings then flash the kernal the mount everything the flash the rom
.If i help u pls give thanks:good:
Try Flashing Stock Rom via Odin then flash ur custom rom again..
To flash stock rom via odin ..please search it in google Im sure theres more responding sites to help..
Please Press Thanks if I helped
Sent from my GT-S5360
Like
markjerald said:
To this procedure:
Flash stock rom via odin
Go to cwm
Mount all system,data,cache
Flash cyanogenmod#2/Jarvis-CM v1.2 #2 kernel
GO to advance Reboot recovery
You will see small fonts
Go to mount and storage
Format system,data,cache
Mount all of them again
Flash cm7 based rom
Wipe data
Reboot system
Press thanks if i helped:good:
Click to expand...
Click to collapse
this is the right procedure ,i perceive just follow this
i have a s3 neo i9301l. as my usb port is broken, i installed kingroot and rooted the ohone. then installed twrp 2.7.8.0 via twrp manager and romeved knox via zip intall. now i wanted to flash cm 11/12.1 but im getting install error on twrp. am i missing something? maybe both cm threads links to the twrp version 2.7.5.0 and i installed a newer twrp?
i didnt wiped data befor flashing, as i have no ability to recover the phone if something going wrong after wiping data
k2828 said:
i have a s3 neo i9301l. as my usb port is broken, i installed kingroot and rooted the ohone. then installed twrp 2.7.8.0 via twrp manager and romeved knox via zip intall. now i wanted to flash cm 11/12.1 but im getting install error on twrp. am i missing something? maybe both cm threads links to the twrp version 2.7.5.0 and i installed a newer twrp?
i didnt wiped data befor flashing, as i have no ability to recover the phone if something going wrong after wiping data
Click to expand...
Click to collapse
Flash the Latest version of the TWRP 2.8.5.0 developed by Rox
download it from this following post
http://forum.xda-developers.com/gal...overy-t-r-p-samsung-galaxy-s3-neo-gt-t2906840
In order to flash go to the twrp 2.7.8.0 that u currently have in ur phone
Tap on Install then the select the downloaded recovery TWRP 2.8.5.0 and flash it to recovery partition properly
the install the latest cm 12.1 Build by Rox via the 2.8.5.0 recovey
Press Thanks Button if i helper you
thx. i will try it later
edit:the flashable zip is down. can someone give me a working link or upload the zip file please?
edit2: i used the recovery img and flashed it via terminal emulator successfully. but im getting the same error above:
k2828 said:
thx. i will try it later
edit:the flashable zip is down. can someone give me a working link or upload the zip file please?
edit2: i used the recovery img and flashed it via terminal emulator successfully. but im getting the same error above:
Click to expand...
Click to collapse
@k2828 Did u formatted data and cache and did factory retest ?
if u didn't pls do that
@azur ARE YOU 100 sure that this is thr problem? you know that my micro USB port is dead...
i mean i had no device where you couldn't flash a new rom without wiping the ild one. i always could wipe afterwards
Proper steps for flashing the CM 12.1 Rom
k2828 said:
@azur ARE YOU 100 sure that this is thr problem? you know that my micro USB port is dead...
i mean i had no device where you couldn't flash a new rom without wiping the ild one. i always could wipe afterwards
Click to expand...
Click to collapse
@k2828 am cen percent sure. am not telling to format system. if u format the system then only u will lose the current Rom.
check that is is saying that "Can't install this package on top of incomparable data run a factory reset"
when format the data the u will not lose the the current rom u will only lose the user data such as installed app, contacts saved in phone etc. actually formatting data means factory reset which will turn ur phone ROM into brand new u have to start over form the beginning. if u want to be safer side first do an nandroid backup of current stock ROM man then only u can restore that at any cost
look at the following step posted by @Rox
1. Download the ROM from the link below
2. Download GAPPS
3. Transfer the zip files to your SD card
4.. Reboot to recovery mode ( Vol UP + Home + Power )
Note: It is highly recommended to use TWRP recovery
5. Optional: Do nandroid backup
6. Wipe data / Factory Reset
Note: Needed if you are updating from other andorid version or stock
7. Install CM zip and GApps zip
8. Reboot to system
in the first you have to do Wipe data / Factory Reset the only u have to install the CM zip
still if u not believed me in the sense
https://www.youtube.com/watch?v=Esmt7eIIPjc
check out this video in that he will be using the CWM recovery to flash CM12.1 he will perform the Wipe data / Factory Reset first and then only he will Install CM zip and GApps zip
Press Thanks Button if i helper you
thx dude. i have overseen that there is a sd card slot. it worked after wipping data
What if i m rooting first tym my s3 neo