[Q] Soft Brick with MF3 - Help - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

With me not reading about Samsung latest OTA locked bootloader , I rooted my phone, installed TWRP and now I'm stuck at a soft brick at the flash screen.
I can boot into TWRP recovery, but after trying to flash Cyanogenmod, my phone hangs at the Samsung Galaxy S4 splash screen.
I read about a method via ODIN to 'fix' the soft boot, but how can I flash a new ROM on that will work?
Thanks for the help guys, I'm dreading telling my wife I bricked my phone.

Check out this thread. Might be of help
http://forum.xda-developers.com/showthread.php?t=2418222
Sent from my GT-I9505G using Tapatalk 2

Febby said:
Check out this thread. Might be of help
http://forum.xda-developers.com/showthread.php?t=2418222
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Thanks, but the issue is I don't currently have any OS/ROM installed. My phone is completely wiped. When I try to flash my Cyanogenmod nightly with TWRP, my phone restarts and gets stuck at the Galaxy S4 splash screen.

MattBrag said:
Thanks, but the issue is I don't currently have any OS/ROM installed. My phone is completely wiped. When I try to flash my Cyanogenmod nightly with TWRP, my phone restarts and gets stuck at the Galaxy S4 splash screen.
Click to expand...
Click to collapse
Sounds dreadful you might have to join the others in waiting for a new kies firmware to recover the device back to stock.
Sent from my GT-I9505G using Tapatalk 2

MattBrag said:
Thanks, but the issue is I don't currently have any OS/ROM installed. My phone is completely wiped. When I try to flash my Cyanogenmod nightly with TWRP, my phone restarts and gets stuck at the Galaxy S4 splash screen.
Click to expand...
Click to collapse
You should have read a little before trying to root and put on a recovery. You can't put on a recovery and flash roms with the mf3 OTA. You now have a very expensive paper weight. Congratulations! Patience and hope are your best options.

jd1639 said:
You should have read a little before trying to root and put on a recovery. You can't put on a recovery and flash roms with the mf3 OTA. You now have a very expensive paper weight. Congratulations! Patience and hope are your best options.
Click to expand...
Click to collapse
JD, thanks. As I said, I didn't realize there was an OTA update.
Febby, thanks for the positive response. I'll keep an eye out for a Kies update.

MattBrag said:
JD, thanks. As I said, I didn't realize there was an OTA update.
Febby, thanks for the positive response. I'll keep an eye out for a Kies update.
Click to expand...
Click to collapse
That's your best bet. Once Samsung adds MF3 or a higher firmware to kies for the i337... You'll hopefully be able to recover it via emergency mode.
Sent from my GT-I9505G using Tapatalk 2

Doesnt sound like you were on mf3...try odin
If you were on mf3 you would never be able to even boot into twrp to flash anything...
So start over with odin
Read up on loki
Either get loki doki and flash after every rom flash or grt an auto loki recovery
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4

mg2195 said:
Doesnt sound like you were on mf3...try odin
If you were on mf3 you would never be able to even boot into twrp to flash anything...
So start over with odin
Read up on loki
Either get loki doki and flash after every rom flash or grt an auto loki recovery
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
That is exactly what I think. Flashing a custom recovery is impossible on MF3. Dude just forgot to loki it.

Related

[Q] return to stock recovery?

I would like to update to mf3 but after doing the ota update it reboots to recovery but I now have twrp instead of the required stock recovery...
After doing a lot of searching the only solution I found was to flash the official firmware with odin, but I'm assuming I will have to do a factory reset after this?
Is it possible to replace twrp with the stock recovery without having to do a factory reset or is there another way to get the mf3 update with twrp? (I'd rather not have to re-install all my apps and settings)
I hope my questions make sense its late and I'm tired.
badboyz said:
I would like to update to mf3 but after doing the ota update it reboots to recovery but I now have twrp instead of the required stock recovery...
After doing a lot of searching the only solution I found was to flash the official firmware with odin, but I'm assuming I will have to do a factory reset after this?
Is it possible to replace twrp with the stock recovery without having to do a factory reset or is there another way to get the mf3 update with twrp? (I'd rather not have to re-install all my apps and settings)
I hope my questions make sense its late and I'm tired.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=42253396#post42253396
There is always a risk of screwing something up...so read the thread, follow the directions, and decide if you want to take the risk..it's your decision.
Why not just flash a sweet custom rom like omega v9.0? That's the best thing about a custom recovery. It makes it easy to back up your current content and then try out a wide variety of mods and roms.
It's kinda counter productive to flash a stock recovery when you are trying to mod or customize your phone.
Odin is the cats butthole when trying to return to stock. Also, read the poop out of these threads... somebody has done what you want to do already so most things can be resolved with the solutions others have presented.
Bigbabyjesus said:
Why not just flash a sweet custom rom like omega v9.0? That's the best thing about a custom recovery. It makes it easy to back up your current content and then try out a wide variety of mods and roms.
It's kinda counter productive to flash a stock recovery when you are trying to mod or customize your phone.
Odin is the cats butthole when trying to return to stock. Also, read the poop out of these threads... somebody has done what you want to do already so most things can be resolved with the solutions others have presented.
Click to expand...
Click to collapse
The OP said he wants to update to MF3. I can't figure out why anyone would willingly do so either, but it is his decision. Personally I would also just flash one of the MF3 ROMs or International updated ROMs and still have the ability to use custom recovery with the benefits (I don't really think there are any) of MF3.
scott14719 said:
http://forum.xda-developers.com/showthread.php?p=42253396#post42253396
There is always a risk of screwing something up...so read the thread, follow the directions, and decide if you want to take the risk..it's your decision.
Click to expand...
Click to collapse
This should work. When you type the command make sure that the block number ( mmcblk0p21) is correct. Any mistake there and you will get a $600 paperweight
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
I read there is a root method for the MF3 OTA update in general section
Sent from my SAMSUNG-SGH-I337 using xda premium
jball said:
I read there is a root method for the MF3 OTA update in general section
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
This is correct, but it has nothing to do with the OP's request.
I read this hole page and u quoted the op wanted to update to mf3 so I just reassured the op that there is a root method for it .I do apologize to the op
Sent from my SAMSUNG-SGH-I337 using xda premium
Thanks for all the replies.
I wanted to update to mf3 because isn't it a newer modem? I was waiting until root was possible which now there is a method for mf3.
Sent from my Samsung S4
AT&T Message - Not Authorized Software found
rushi.1986 said:
This should work. When you type the command make sure that the block number ( mmcblk0p21) is correct. Any mistake there and you will get a $600 paperweight
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
thanks god did not turn my cell into a $600 paperweight :laugh: ... the process worked, but, when I try to do a factory recovery a sign from ATT says, in the top:
Secure Fail: Kernel
and a yellow exclamation with the following message: "System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help."
has anyone seen this?
badboyz said:
I would like to update to mf3 but after doing the ota update it reboots to recovery but I now have twrp instead of the required stock recovery...
After doing a lot of searching the only solution I found was to flash the official firmware with odin, but I'm assuming I will have to do a factory reset after this?
Is it possible to replace twrp with the stock recovery without having to do a factory reset or is there another way to get the mf3 update with twrp? (I'd rather not have to re-install all my apps and settings)
I hope my questions make sense its late and I'm tired.
Click to expand...
Click to collapse
You can flash your recovery with fastboot command:
Code:
fastboot flash recovery /path/to/revocery.img
I ended up just flashing the modem it seemed to be the safest option
Sent from my Samsung S4
simone.mutti said:
You can flash your recovery with fastboot command:
Code:
fastboot flash recovery /path/to/revocery.img
Click to expand...
Click to collapse
Are you sure that will work with the AT&T S4?
scott14719 said:
Are you sure that will work with the AT&T S4?
Click to expand...
Click to collapse
I don't think so, pretty sure that the bootloader has to be unlocked to do that
Sent from my Samsung S4
badboyz said:
I don't think so, pretty sure that the bootloader has to be unlocked to do that
Sent from my Samsung S4
Click to expand...
Click to collapse
I'm confused, are you on stock mf3 and have twrp installed as your recovery?
jd1639 said:
I'm confused, are you on stock mf3 and have twrp installed as your recovery?
Click to expand...
Click to collapse
I was on mdl rooted with twrp recovery then flashed just the modem for mf3
Sent from my Samsung S4

Flashed wrong twrp...

Ok... I have been reading way to much today, to the point i did something rather noobish.
Was in the dev section TWRP thread specifically looking to downgrade fron 2.6 to 2.5, saw the last post where someone posted a dropbox link of 2.5. Thought "how convenient" and flashed. But the zip was for another model number, now i cant get into my recovery.
Odin flash of the stock image is always an option. But one that I would prefer to avoid it if at all possible. I was hoping that someone else out there was well... as stupid as I am, and maybe had some advice?
Is there any possibility that goo manager will simply over right the wrong recovery image with the proper?
Or is it by any chance possible to simply flash the TWRP ZIP with Odin?
Any thoughts would be greatly appreciated, and I already know that I'm a burnout lol.
Sent from my SGH-I337M using Tapatalk 2
Just flash the 2.5 twrp zip in twrp. It'll down grade
Goo should over write it, and just to make sure ..you have the i337m -Non att variant. Youll have to see if anybody has a non loki version if twrp 2.5
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
jd1639 said:
Just flash the 2.5 twrp zip in twrp. It'll down grade
Click to expand...
Click to collapse
That's the problem... Cant get into recovery anymore.
Sent from my SGH-I337M using Tapatalk 2
mg2195 said:
Goo should over write it, and just to make sure ..you have the i337m -Non att variant. Youll have to see if anybody has a non loki version if twrp 2.5
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Yeah, was hoping someone would say that. My thoughts were the same. But after that last bout of stupidity, i guess I wanted to hear it from someone else...
Sent from my SGH-I337M using Tapatalk 2
celkin said:
Yeah, was hoping someone would say that. My thoughts were the same. But after that last bout of stupidity, i guess I wanted to hear it from someone else...
Sent from my SGH-I337M using Tapatalk 2
Click to expand...
Click to collapse
Can you get goomanager to install it?
Tylor
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Can you use odin to flash the correct twrp with a .tar file?
Tylorw1 said:
Can you get goomanager to install it?
Tylor
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
Yeah, just finished a backup/restore after goo re installed 2.6.
Everything seems fine. Just with so many "brick" threads on here wanted to be careful.
The bricks revolve mostly around the newest update that locks the boot loader on the at&t s4. On the m non at&ti believe you just need a non Loki kernel but I am not positive.
Tylor
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Tylorw1 said:
The bricks revolve mostly around the newest update that locks the boot loader on the at&t s4. On the m non at&ti believe you just need a non Loki kernel but I am not positive.
Tylor
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
If it's I337m or M919, Loki or not, it doesn't matter...
My phone is bootloader unlocked from the start from what i understand its the Canadian Rogers varient.
Im just now after reading countless threads wraping my head round this device. Its way more complex of a situation then the note 2 (previous phone).
My understanding is that we stay away from anything loki'd.
2 days in and im still not comfortable flashing any rom 4.2 or 4.3 lol. Another day or two of reading :-\
Sent from my SGH-I337M using Tapatalk 2
celkin said:
My phone is bootloader unlocked from the start from what i understand its the Canadian Rogers varient.
Im just now after reading countless threads wraping my head round this device. Its way more complex of a situation then the note 2 (previous phone).
My understanding is that we stay away from anything loki'd.
2 days in and im still not comfortable flashing any rom 4.2 or 4.3 lol. Another day or two of reading :-\
Sent from my SGH-I337M using Tapatalk 2
Click to expand...
Click to collapse
Ponder that, a canuck is less subject to tyranny? Your bootloader isn't locked? NICE! AT&T has degenerated from American Telephone and Telegraph into a globalized melting pot of greed and required upgrade costs and technical support that uses broken English spoken by people in India. You Canadians luck out this time!
I jumped in with motochopper to get root back in May and had the AT&T Software update service frozen with Titanium Backup back in June, I was so lucky to be "on top of it" by reading this forum. I used "Casual" to obtain TWRP 2.5.0.2 a custom recovery. I've never seen it so easy. After burning an image 3.56 GB of my stock firmware, I have since deleted it from my handset and replaced it with a nandroid of my daily driver here because GoldenEye is flawless. I saved a copy of the stock firmware on my desktop computer just in case, but I doubt I'll ever flash it and all of it's horrendous bloatware.
So I'm a happy camper, that only suffers the jone'sen for a fix as a "flash junkie". I will try CyanogenMod on this S4 after they iron the kinks out.
Looks like you're ok now?
FYI for anyone else in similar situation, ROM Toolbox Pro can download and install recoveries as well. It can access TWRP as well as CWM recoveries. A bonus for TWRP, it detects 2.5.0.2 as latest (avoid the occasional Teamwin splash screen hang with 2.6)!
I used this method to downgrade from 2.6 to 2.5.0.2. :good:
Word of warning, why upgrade from a working twrp 2.5.0.2, when it works flawless? Sometimes upgrading to a newer, is not always the best...look at the XDA app....yikes...
bo8 said:
Looks like you're ok now?
FYI for anyone else in similar situation, ROM Toolbox Pro can download and install recoveries as well. It can access TWRP as well as CWM recoveries. A bonus for TWRP, it detects 2.5.0.2 as latest (avoid the occasional Teamwin splash screen hang with 2.6)!
I used this method to downgrade from 2.6 to 2.5.02. :good:
Click to expand...
Click to collapse
All good thanks
Will Rom toolbox screw anything up if i install TWRP 2.5 over goo's install of 2.6?
I dont trust 2.6... Too many glitches for me and not having faith in your recovery is a scary thing...
Sent from my Nexus 7 using Tapatalk 2
celkin said:
All good thanks
Will Rom toolbox screw anything up if i install TWRP 2.5 over goo's install of 2.6?
I dont trust 2.6... Too many glitches for me and not having faith in your recovery is a scary thing...
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
You're very welcome! I initially had TWRP 2.6 installed via rooting procedure (one-click method) and recently had ROM Toolbox flash TWRP 2.5.0.2 over it. No probs. Did full nandroid after it.
Sent from my SGH-I337M using xda app-developers app
Wrong twrp flashed
Dear friend wrong twrp for my device I'm not able to go to the boot menu, how can i get rid of this, help me please. I've my stack memory and kernel already backup in my device memory.
The phone is an att i337? If it is, I assume the bootloader is unlocked since you were able like to flash a custom recovery.
i have no twrp AND I am stuck in boot loop...............................what will I do
Boot into download mode and confirm the phone's model number. Then flash a stock ROM from sammobile.com with Odin to get the phone back to stock.

Galaxy S4 Recovery mode not working

So, first, I'm running the stock 4.2.2 rooted on the ATT SGH-I337.
I installed ROM manager shortly after the root, and recently downloaded CM 10.1.3 for the att model of my phone. However, I couldn't find it in the recovery system to flash it. So, I install goomanager and flash over to TWRP, thinking maybe TWRP's easier interface will help me to find it. I reboot into recovery, and if I attempt to enter recovery mode, it gets stuck on the "Downlaoding, do not turn off target" screen. So, I re-flash CWM back on it, and reboot to recovery, and get stuck on that same screen again. If I just boot it, it's fine, jumps right back into 4.2.2 TouchWiz rooted. However, as you probably know, I can't install a ROM without recovery mode, and stock TouchWiz is poo.
I'd like to get CM running asap, although I'm just glad my phone still RUNS for now (my experience installing CM on my S3 was a NIGHTMARE).
So yea, any reason I would be getting stuck on that screen and unable to enter recovery? Like I said, I'd like to have CM as soon as I can.
Also, if someone can link me to a guide to install through CWM w\o needing a computer, that'd be wonderful. Thanks!
I'm assuming you're running on the MF3 build version. Read up before you brick your device. Your only option for a custom recovery is safestrap. Come on people.
Cheers.
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ryno9100 said:
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
What firmware version do you have. Look at the last three characters of your build number
jd1639 said:
What firmware version do you have. Look at the last three characters of your build number
Click to expand...
Click to collapse
It's MF3
ryno9100 said:
It's MF3
Click to expand...
Click to collapse
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
jball said:
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
And also, I did, in fact, read past rooting, and found several people running CWM and TWRP fine, so I figured it would work. Now maybe they didn't have MF3,and I wasn't paying extremely close attention, but I'm pretty sure there were some on the same model and firmware as I am.
jd1639 said:
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
Click to expand...
Click to collapse
So, at this point, it's a waiting game for someone to find out how to put a recovery mode on an MF3 firmware, is what you're telling me?
Also, I may have been in stock. I don't remember EXACTLY what clockwork looked like. I just know it wouldn't let me select the gapps and CM files,which is why I tried TWRP. Though I did have CWM recovery flashed when I booted it into recovery those several times.
Dude you never booted CWM. That was MF3s stock recovery. MF3 does not allow any custom recovery but Safestrap.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

s4 wont boot or enter recovery please help

Stuck on screen with word SAMSUNG and open lock saying custom wont boot or enter recovery
What did you do to get in this position? It would help to have some more info
Put your phone in downloading mode and flash appropiated firmware of your phone
Enviado desde mi GT-I9300 usando Tapatalk 2
jd1639 said:
What did you do to get in this position? It would help to have some more info
Click to expand...
Click to collapse
Im on mk2. rooted from there. tried to install cwm recovery through gooim app. No go. Used safestrap I believe is what its called. It installed twrp. Then downloaded vision x rom and loki doki zip as he described I should do. Flashed loki. Um rebooted all was good made a nandroid and then moved the rom zip from internal to external sd and tried to flash it twice with could not open zip appearing. ...and then it went to the screen I described in the op and will not go back to recovery or boot
I might be able to help.
ce250 said:
Im on mk2. rooted from there. tried to install cwm recovery through gooim app. No go. Used safestrap I believe is what its called. It installed twrp. Then downloaded vision x rom and loki doki zip as he described I should do. Flashed loki. Um rebooted all was good made a nandroid and then moved the rom zip from internal to external sd and tried to flash it twice with could not open zip appearing. ...and then it went to the screen I described in the op and will not go back to recovery or boot
Click to expand...
Click to collapse
Can you go into download mode? Also would you consider going full stock again (no root)?
Odin this if you just want it to work again:
http://forum.xda-developers.com/showthread.php?t=2621279
ce250 said:
Im on mk2. rooted from there. tried to install cwm recovery through gooim app. No go. Used safestrap I believe is what its called. It installed twrp. Then downloaded vision x rom and loki doki zip as he described I should do. Flashed loki. Um rebooted all was good made a nandroid and then moved the rom zip from internal to external sd and tried to flash it twice with could not open zip appearing. ...and then it went to the screen I described in the op and will not go back to recovery or boot
Click to expand...
Click to collapse
You need to read before doing more with recovery and ROMs. You can't use CWM on MK2, only safestrap. Loki doesn't work on MK2 either and safestrap doesn't flash kernels. You probably had a bad download that didn't flash right and your system probably got wiped if it's not going past the splash screen. Go flash the MK2 TAR files, they're in the General section.
Sent from Black<3's I337 running Hyperdrive
ce250 said:
Im on mk2. rooted from there. tried to install cwm recovery through gooim app. No go. Used safestrap I believe is what its called. It installed twrp. Then downloaded vision x rom and loki doki zip as he described I should do. Flashed loki. Um rebooted all was good made a nandroid and then moved the rom zip from internal to external sd and tried to flash it twice with could not open zip appearing. ...and then it went to the screen I described in the op and will not go back to recovery or boot
Click to expand...
Click to collapse
*facepalm*
seedeh said:
Can you go into download mode? Also would you consider going full stock again (no root)?
Odin this if you just want it to work again:
http://forum.xda-developers.com/showthread.php?t=2621279
Click to expand...
Click to collapse
ok thanks I will try this
DeadlySin9 said:
You need to read before doing more with recovery and ROMs. You can't use CWM on MK2, only safestrap. Loki doesn't work on MK2 either and safestrap doesn't flash kernels. You probably had a bad download that didn't flash right and your system probably got wiped if it's not going past the splash screen. Go flash the MK2 TAR files, they're in the General section.
Sent from Black<3's I337 running Hyperdrive
Click to expand...
Click to collapse
Ok thank u for the advice its much appreciated. Ive had several android phones in the past that ive rooted and of course flashed like crazy but this s4 seems to b so different and alot more confusing...to me anyways. Ive always had Verizon as well and it seems like u have to jump through hoops on att to do all of this. Do u perhaps have any other advice for me...maybe a run down of what I need to do exactly. Thanks again man
ce250 said:
ok thanks I will try this
Click to expand...
Click to collapse
Yeah this helped me out whenever my s4 was messing up.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ce250 said:
Ok thank u for the advice its much appreciated. Ive had several android phones in the past that ive rooted and of course flashed like crazy but this s4 seems to b so different and alot more confusing...to me anyways. Ive always had Verizon as well and it seems like u have to jump through hoops on att to do all of this. Do u perhaps have any other advice for me...maybe a run down of what I need to do exactly. Thanks again man
Click to expand...
Click to collapse
Follow my thread http://forum.xda-developers.com/showthread.php?t=2621279 that was referred by @DeadlySin9 and @seedeh ....check post #2 for guide on how to. .... is really easy and I also attached Odin3v1.85 ..... Goodluck. ... anymore more question. .... feel free to PM me. .....:thumbup:
Swyped from MK2 Dark Venom SS Edition
ce250 said:
ok thanks I will try this
Click to expand...
Click to collapse
Did you get it working?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Originally Posted by ce250
ok thanks I will try this
Click to expand...
Click to collapse
Did you get it working?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Yes I did thanks to you all. Was relieved to see it boot back up after running that in odin. Can not Thank u guys enough. Gonna give this another try I guess soon
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ce250 said:
Yes I did thanks to you all. Was relieved to see it boot back up after running that in odin. Can not Thank u guys enough. Gonna give this another try I guess soon
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Cool and congratulations!
Sent from my SAMSUNG-SGH-I337 using Tapatalk

[Q] Bricked i337 -- URGENT

Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Suprr said:
Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Click to expand...
Click to collapse
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
jmjoyas said:
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
Click to expand...
Click to collapse
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Suprr said:
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Click to expand...
Click to collapse
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Jmjoyas told me to flash the full tar version and No I do not.
Suprr said:
Jmjoyas told me to flash the full tar version and No I do not.
Click to expand...
Click to collapse
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
To be frank, I have not a clue of what any of those are.
Suprr said:
To be frank, I have not a clue of what any of those are.
Click to expand...
Click to collapse
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am flashing it right now. Let's hope it works.
EDIT:
Flashed the full tar version for mk2 to no avail via Odin
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
I flashed from this thread and this line:
http://forum.xda-developers.com/showthread.php?t=2700726
To return to factory stock MK2 flash the I337_MK2_Full_Odin tar
Click to expand...
Click to collapse
Suprr said:
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
Click to expand...
Click to collapse
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I love you. thank you so much.
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Suprr said:
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Click to expand...
Click to collapse
You're on mk2 firmware now. You'll need to root it using safe root and then put safestrap on in order to flash that rom. Look in the general forum for index, all thing mk2 and nb1. There's a lot of info there so read it carefully
Sent from my Nexus 5 using XDA Free mobile app

Categories

Resources